Might be a bit of an overkill, but still. One should cleanup after
themselves.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Adds a safe strtol helper function, modeled loosely after Wayland
scanner's strtouint. This encapsulates the various quirks of strtol
behavior, and streamlines the interface to just handling base-10 numbers
with a simple true/false error indicator and a uint32_t return by
reference.
Test cases are loosely derived from an earlier patch by Imran Zaman.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[With hexadecimal color values now handled via their own routine,
re-introduce the negative unsigned numbers fix.]
strtoul() has a side effect that when given a string representing a
negative number, it treats it as a high value hexadecimal. IOW,
strtoul("-42", &val) sets val to 0xffffffd6. This could potentially
result in unintended surprise behaviors.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Previously weston_config_section_get_uint was serving dual purpose for
parsing both unsigned decimal integer values (ids, counts, seconds,
etc.) and hexadecimal values (colors), by relying on strtoul's
auto-detection mechanism.
However, this usage is unable to catch certain kinds of error
conditions, such as specifying a negative number where an unsigned
should be used. And for colors in particular, it would misparse hex
values if the leading 0x was omitted. E.g. "background-color=99999999"
would render a near-black background (effectively 0x05f5e0ff) instead of
medium grey, and "background-color=ffffffff" would be treated as an
error rather than white. "background-color=0x01234567",
"background-color=01234567", and "background-color=1234567" each
resulted in the value being parsed as hexadecimal, octal, and decimal
respectively, resulting in colors 0x01234567, 0x00053977, and 0x0012d687
being displayed.
This new routine forces hexadecimal to be used in all cases when parsing
color values, so "0x01234567" and "01234567" result in the same color
value, "99999999" is grey, and "ffffffff" is white. It also requires
exactly 8 or 10 digits (other lengths likely indicate typos), or the
value "0" (black).
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF. By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.
This reverts commit 6351fb08c2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error. IOW, strtoul("-42", &val) sets val to 42. This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Check errno, which is set of over/underflow, out of range, etc. Also
check for empty strings (the usages covered in this patch already also
cover the case where there are non-digits present). Set errno to 0
before making the strto*l call in case of pre-existing errors
(i.e. ENOTTY when running under the testsuite).
This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c).
In tests, also check errno, and add testcases for parsing '0'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This is a follow up for weston-test to manually
set mapped status for views/surfaces it controls
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement a simple register and lookup for function tables. This is
intended for plugins to expose APIs to other plugins.
It has been very hard to arrange a plugin to be able to call into
another plugin without modifying Weston core to explicitly support each
case. This patch fixes that.
The tests all pass.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
The name suggests that it activates surfaces, but the code says it
rather just assigns keyboard focus. Rename it for clarity, and so the
original function name could be used for something more appropriate
later. Switch order of parameters since keyboard focus is a property of
the seat. Update all callers as appropriate.
Change was asked for by pq, May 26, 2016:
"This should be called weston_seat_set_keyboard_focus(seat, surface).
Keyboard focus is a property of the seat."
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Useful for pointing out where the image comparisons fail.
Internal-screenshot-test is modified to save the visualization if the
test fails.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Screenshooting does not involve creating a wl_surface, so using struct
surface is superfluous.
Return a struct buffer instead. It could have been just a
pixman_image_t, but setting up proper destruction would be a bit more
work. Should not hurt to keep the wl_buffer around until the user is
ready to free the image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites write_surface_as_png() into write_image_as_png(), which
operates on a pixman_image_t instead of a struct surface.
This is part of the migration to use pixman_image_t everywhere without
superfluous parameters/members.
Now the image saving handles more than just ARGB32 format, presumably.
At least it does not assume everything is always ARGB32.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This rewrites load_surface_from_png() to load_image_from_png(), to
return a pixman_image_t instead of a struct surface.
A loaded image has no need for wl_buffer or wl_surface or any of the
associated attributes. This is part of unifying to make everything use
pixman_image_t.
cairo_surface_flush() is added, because Cairo documentation for
cairo_image_surface_get_data() says you have to flush after drawing,
before using the data. It is unclear if loading a PNG counts as drawing,
so stay on the safe side.
load_image_from_png() now pays attention to the pixel format returned by
Cairo, which seems to come out as CAIRO_FORMAT_RGB24 in
internal-screenshot-test, not as CAIRO_FORMAT_ARGB32 as expected. I do
not know if Cairo actually guarantees the x8/a8 channel to be 0xff for
RGB24, but better to not trust it. Therefore the image is explicitly
converted to a8r8g8b8 as needed. This also adds support for loading A8
and RGB16_565 images, provided that Cairo delivers them.
The cairo surface is now wrapped directly into a pixman_image_t. If the
pixel format conversion is not needed, this eliminates a copy of the
image data. The Cairo surface will get automatically destroyed with the
Pixman image.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
check_surfaces_geometry() is removed as it was not used by anything, and
unlikely would be.
check_surfaces_equal() is merged into check_surfaces_match_in_clip(),
passing a NULL clip means to compare whole images.
check_surfaces_match_in_clip() is converted to work on pixman_image_t
instead of struct surface. The function is only concerned about
comparing images in memory, and does not care about a wl_buffer or a
wl_surface.
The verbosity of image comparisons is greatly reduced. An image mismatch
no longer prints a flood of raw pixel values. This will be replaced
later with a function writing out an error image instead.
Degenerate comparisons are no longer accepted, be that clip outside
images or zero area. Those are an indication of a programmer error.
The pixel format assumptions are made more visible in the code.
A new internal helper image_check_get_roi() computes and verifies the
area to be compared. Image iterator helper makes it simpler to write
manual pixel-poking loops.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change create_shm_buffer() to handle any pixel format known to Pixman.
Presumably in the future we might want to test e.g. RGB565 content with
screenshot tests.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
No users remain outside the file. This will allow to fix the assumptions
in the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the uses of create_shm_buffer() from this test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We are growing more tests that need to handle buffers, both just images
and wl_buffers. Particularly the screenshooting facility needs these.
Currently everything is in struct surface, which contains more than we
need. It is a bit messy.
Create a new struct buffer to encapsulate the image representation, the
wl_buffer, and enough information to tear it all down (munmap) so we
don't have to leak everything. Some tests might start doing things in
loops, and leaking would accumulate.
Instead of inventing our own image representation, use pixman_image_t.
It is a well-tested library worth using, and we already rely on it in
other places.
This makes the tests depend on Pixman, which requires the fix for
building buffer-count, which would otherwise not find pixman.h.
The new create_shm_buffer_a8r8g8b8() creates an image with an explicit
format, and pixman_image_t keeps track of it. And stride and size and
data. This implementation is still a little hacky due to calling
create_shm_buffer().
A very new thing is buffer_destroy(). Previously we didn't really free
any buffers. It is not a problem when the process will exit soon anyway,
but it may become a problem if tests start iterating things.
Manual memset() on a image is converted to a pixman action, just to show
how to do it properly with pixman.
Stride and pixel format assumptions still linger all around, but those
are for another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
A surface can be added to many layers.
This test is implemented to test this use-case
and the correct behaviour of get_layers_under_surface
API.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston-tests-env is a beast to handle, when you would like to start
weston manually for a test you wan to start inside gdb. This patch
causes the full command line to be printed to the automake test logs, so
you can copy it from there and run it by hand.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This fix also depends on "compositor-headless: do not create a seat".
If we lose the race against weston-desktop-shell setting cursors, which
is very rare, we get a cursor image in the screenshot, causing the test
to fail. This is now fixed by moving the (remaining) cursor out of the
way.
Arguably we should have better solutions for this, but that is another
story. This is a stop-gap measure we can copy also in new
screenshooting tests.
v2: Remove the example code for how to trigger the race, and rewrite the
big comment.
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
This is the start of separating weston-the-compositor source files from
libweston source files.
This is moving all the files related to the 'weston' binary. Also the
CMS and systemd plugins are moved.
xwayland plugin is not moved, because it will be turned into a
libweston feature.
To avoid breaking the build, #includes for weston.h are fixed to use
compositor/weston.h. This serves as a reminder that such files may need
further attention: moving to the right directory, or maybe using the
proper -I flags instead.
v2: Move also screen-share.c, and add a note about weston-launch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
Check that the keyboard init in weston-test.so plugin succeeds.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
These tests poke the viewporter interface to ensure proper behaviour
from client perspective, without testing the rendering result.
These cases are covered:
- create viewport twice
- source rectangle invalid value errors, and unset
- destination size invalid value errors, and unset
- source causing non-integer destination size
- source inside/outside of buffer with transform, scale
- source outside NULL buffer, then getting real buffer
- source outside NULL buffer with inherited NULL
- set_source, set_destination, and destroy after the wl_surface is
destroyed
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
They belong in the compositor rather than libweston since they
set signals handlers, and a library should not do that behind its
user's back. Besides, they were using functions in main.c already
so they were not usable by other compositors.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When a test destroys a wl_surface, it is still possible to get events
referring to the destroyed surface. The surface in such cases will be
NULL.
Handle NULL surface gracefully in keyboard and pointer enter/leave
handlers. Touch-down handler is already NULL-safe.
This fixes a SEGV in a test I am writing for wp_viewport.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The add_notification_configure_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to
add_listener_configure_surface.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
The remove API is removed too:
- ivi_layout_remove_notification_configure_surface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The add_notification_remove_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_remove_surface.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
The remove API is removed too:
- ivi_layout_remove_notification_remove_surface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The add_notification_remove_layer API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_remove_layer.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
The remove API is removed too:
- ivi_layout_remove_notification_remove_layer
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The add_notification_layer_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_layer_surface.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
The remove API is removed too:
- ivi_layout_remove_notification_create_layer
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The add_notification_create_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to
add_listener_create_surface.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
The remove API is removed too:
- ivi_layout_remove_notification_create_surface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The layer_add_notification API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to layer_add_listener.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
This patch also remove two APIs which are not needed:
- ivi_layout_layer_remove_notification
- ivi_layout_layer_remove_notification_by_callback
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The surface_add_notification API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to surface_add_listener.
This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
by controller plugins
3. Remove API is not needed. Controller plugins can easily
remove the listener link.
This patch also remove two APIs which are not needed:
- ivi_layout_surface_remove_notification
- ivi_layout_surface_remove_notification_by_callback
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
IVI layout APIs now are called with weston_output pointers,
instead of ivi_layout_screen pointers.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>
The compositor data struct already has a list of weston outputs.
Therefore, this API is not required.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>
The controller plugins can get the screen resolution directly from
weston output. Therefore, this API is not required.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>
ivi-screen does not have an id. IVI layout implementation is using
id of weston output. Therefore, this API is unnecessary.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>
Direct fail_on_null calls now produce output like:
[weston-info] clients/weston-info.c:714: out of memory
xmalloc, et al produce output on failure like:
[weston-info] out of memory (-1)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Remove the unstable presentation_timing.xml file, and use
presentation-time.xml from wayland-protocols instead to generate all the
Presentation extension bindings.
The following renames are done according to the XML changes:
- generated header includes
- enum constants and macros prefixed with WP_
- interface symbol names prefixed with wp_
- protocol API calls prefixed with wp_
Clients use wp_presentation_interface.name rather than hardcoding the
global interface name: presentation-shm, weston-info, presentation-test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
[Pekka: updated wayland-protocols dependency to 1.2]
Cleaned up test runner script to unify sections launching weston.
This makes the sections more legible and differences easier to spot.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[jonas: only send focus wl_pointer.frame if resource supports it]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Patch updated to remove dead lines as suggested by Daniel Stone
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of only passing absolute pointer coordinates, effectively
loosing motion event data, pass a struct that can potentially contain
different types of motion events, currently being absolute and relative.
A helper function to get resulting absolute coordinates was added for
when previous callbacks simply used the (x, y) coordinates.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The name of ivi_controller_interface is changed to ivi_layout_interface
with this patch.
This name is better suited to the interface, because it is implemented
in ivi-layout.c and its methods are linked to ivi_layout* functions.
Furthermore, the controller modules (e.g. hmi-controller) are the users
of this interface and they have their own interfaces,
which are called *_controller_interface,
e.g.: ivi_hmi_controller_interface.
This causes confusion about the software architecture.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Instead of using the implicit name 'data', changed the test
with fixture macro ZUC_TEST_F() to use an additional value
to explicitly set the name to use for test data from the
fixture.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
These routines provide test cases an ability to capture screen images
for rendering verification.
This commit is a no-change refactoring, except for making the routines
non-static. Makefile rules are also updated; most notably, this links
test clients against the cairo libraries now.
v2: Fix pointer code styling, suggested in review
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
xalloc terminates the program abruptly if the requested amount of
memory couldn't be allocated. To insure that the errors are handled
cleanly, use zalloc instead.
Signed-off-by: Seedo Eldho Paul <seedoeldhopaul@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
- opening braces are on the same line as the if statement
- opening braces are not on the same line as the function name
- space between for/while/if and opening parenthesis
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This seems like a good idea for consistency that the protocol header
is included for any protocols used by the code. This also means the
code will compile with headers generated by wayland-scanner -c.
Fixed to use angle brackets.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keyboards and pointers aren't freed when devices are removed, so we should
really be testing keyboard_device_count and pointer_device_count in most
cases, not the actual pointers. Otherwise we end up with different
behaviour after removing a device than we had before it was inserted.
This commit renames the touch/keyboard/pointer pointers and adds helper
functions to get them that hide this complexity and return NULL when
*_device_count is 0.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- add notification of ivi-layer with bad parameter
- add notification of ivi-surface configure with bad parameter
- add notification of creating ivi-layer with bad parameter
- add notification of creating ivi-surface with bad parameter
- add notification of removing ivi-layer with bad parameter
- add notification of removing ivi-surface with bad parameter
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- add notfication of ivi-surface with bad condition
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- notification of adding ivi-layer
- notification of creating ivi-layer
- notification of removing ivi-layer
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- notification of adding ivi-surface
- notification of ivi-surface configure
- notification of creating ivi-surface
- notification of removing ivi-surface
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The TESTs in ivi_layout-test.c may have several server-side parts
(RUNNER_TEST in ivi_layout-test-plugin.c) each. Sometimes we need to
carry state from one RUNNER_TEST to another within one TEST, but not
across multiple TESTs. The correct lifetime of that state would be the
lifetime (and identity) of the runner_resource, as one TEST creates and
uses at most one weston_test_runner during its lifetime.
However, tests are executed one by one. Take a shortcut, and use a static
global for storing that state. This turns the test_context into a
singleton. To ensure it is not confused between multiple TESTs, add
asserts to verify its identity.
Following patches will add tests for notification callbacks. These will
be using the carried state.
[Pekka: add serialization checks, rename the global, rewrite commit message.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- ivi-screen operation with bad parameter
- render order with bad parameter
- destroy ivi-layer in the ivi-screen and call commit_changes
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- ivi-screen id
- ivi-screen resolution
- render order of ivi-layers in ivi-screen
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create with bad parameter
- visibility with bad parameter
- opacity with bad parameter
- destination rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source rectangle with bad parameter
- properties with bad parameter
- destroy ivi-layer and call set_visibility_commit_changes
- destroy ivi-layer, call set_opacity, and commit_changes
- destroy ivi-layer, call set_orientation, and commit_changes
- destroy ivi-layer, call set_dimension, and commit_changes
- call set_position, destroy ivi-layer, and commit_changes
- call set_source_rectangle, destroy ivi-layer, and commit_changes
- call set_destination_rectangle, destroy ivi-layer, and commit_changes
- create duplicate
- destroy ivi-layer and call get_layer
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- bad render order of ivi-surface on ivi-layer
- call commitchanges after a ivi_surface in render order is destoryed
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create
- visibility
- opacity
- orientation
- dimension
- position
- destination rectangle
- source rectangle
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These test are implemented on test suite framework, which provides
helper client.
Following features are tested,
- render order of ivi-surfaces on ivi-layer
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-surface,
- destination_rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source_rectangle with bad parameter
- properties with bad parameter
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- ivi_layout_runner with basic_test_names[]
- surface with bad opacity
- destroy ivi/wl_surface and call get_surface
- commit_changes_after_properties_set_surface_destroy with
surface_property_commit_changes_test_names[]
- call set_visibility, destroy ivi-surface, and commit_changes
- call set_opacity, destroy ivi-surface, and commit_changes
- call set_orientation, destroy ivi-surface, and commit_changes
- call set_dimension, destroy ivi-surface, and commit_changes
- call set_position, destroy ivi-surface, and commit_changes
- call set_source_rectangle, destroy ivi-surface, and commit_changes
- call set_destination_rectangle, destroy ivi-surface, and
commit_changes
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested for ivi-surface
- orientation
- dimension
- position
- destination rectangle
- source rectangle
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Use bit-shifts to properly generate pixel data.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We no longer have a race with shell startup because we create our own
colored surface and check that it's properly drawn.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
make check failed for out of tree builds because we didn't set up
WESTON_TEST_REFERENCE_PATH in weston-tests-env
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
Provides a convenience function for JFDI grabbing of a single
screenshot. Tests that are doing multiple screenshots or other
fanciness probably will bypass this routine and do things more manually,
but this'll provide a reference implementation. And hopefully there'll
be enough simple cases that this actually is useful.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Minor refactoring to simplify initial sanity checks of surfaces.
Conceivably useful for other basic checking.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Loads an image from disk via cairo, and copies data into a weston test
surface for internal use.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
And use the helper routine for generating the output filename.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This also serves as a proof of concept of the screen capture
functionality and as a demo for snapshot-based rendering verification.
Implements screenshot saving clientside in the test itself.
This also demonstrates use of test-specific configuration files, in this
case to disable fadein animations and background images.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Implements a simple mechanism to allow tests to customize the
configuration. For a given <name>-test.c just place a <name>.ini file
at the same location as the test itself. Alternately, you can generate
a <name>.ini in the same directory that the compiled test is placed
(i.e. the top builddir). If no configuration file is found, then no
configuration will be used (i.e. --no-config is specified.)
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Introduce helper routines for testing surfaces against specific
conditions. These allow tests to validate screen captures as displaying
the correct rendering results.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is the ivi_layout stand-alone test controller module that does not
require any clients to run. Therefore it is much simpler than
ivi_layout-test-plugin.c and does not need a matching part in
ivi_layout-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Testing the ivi_layout API requires two things:
- the tests must be written as a controller module to access the API
- the tests need a helper client to create some objects that can then be
managed via the API
This patch adds all the infrastructure and two different kinds of
example tests.
Internal ivi-shell (ivi_layout) API tests are listed as ivi-*.la files
in TESTS in Makefile.am. Weston-tests-env detects these, and runs Weston
with ivi-shell, and loads the given module as a controller module, not
as a normal plugin.
The test controller module ivi-*.la will launch a helper client. For
ivi-layout-test.la the helper client is ivi-layout.ivi.
The helper client uses the weston-test-runner framework to fork and exec
each TEST with a fresh connection to the compositor.
The actual test is triggered by the weston_test_runner protocol
interface, a new addition to weston-test.xml. The helper client uses
weston_test_runner to trigger a test, and the server side of the
interface is implemented by the test controller module
(ivi-layout-test.la).
The server side of weston_test_runner uses the same trick as
weston-test-runner.h to gather a list of defined tests. A test is
defined with the RUNNER_TEST macro.
If a test defined by RUNNER_TEST succeeds, an event is sent to the
helper client that it can continue (or exit). If a test fails, a fatal
protocol error is sent to the helper client.
Once the helper client has iterated over all of its tests, it signals
the batch success/failure via process exit code. That is cought in the
test controller module, and forwarded as Weston's exit code.
In summary: each ivi_layout test is a combination of a client side
helper/setup and server side actual tests.
v2: Load weston-test.so, because create_client() needs it.
v3: add a comment about IVI_TEST_SURFACE_ID_BASE.
v4: Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
This simply tests that Weston starts with ivi-shell, and ivi_application
is present.
Changes in v3:
- Rebased to upstream weston-tests-env changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com> (v2)
Also use variable default assignment to eliminate an if clause
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The log files were being named like:
surface-global-test.la-log.txt
surface-global-test.la-serverlog.txt
surface-test.la-log.txt
surface-test.la-serverlog.txt
text.weston-log.txt
text.weston-serverlog.txt
For consistency, omit the test filename's extension (.la/.so).
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
basename returns the filename without path information (but with
the file extension). We can get this more efficiently via shell
variables.
Also, for the socket name, use the test's name without the file
extension.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
[Pekka: rebased without "tests: Support --config to enable tests to
override config defaults".]
A more descriptive name to not be confused with create_client().
v2: Rebased: fix also devices-test.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Introduce a new helper create_client(), which creates and initializes
the client struct, but does not create a wl_surface.
This will be useful for ivi-shell tests.
v2: Rebased, and restored the dependency to weston-test.so, since seat
handling requires it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Test misc races when adding/releasing devices
v2.: use one roundtrip after releasing devices
add touch support
v3.: remove useless checks
add few comments
repeat tests 30 times instead of 100 times
(it took too long, 30 is enough)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Let the client bind to wl_touch. Since we have our own seat,
we know that the compositor will have wl_touch capability.
v2: rebased due to changes in previous commit
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running on different backends, we don't know what devices
the backend provides. Create new seat for tests that contains
everything what we need. This is also first step in adding
touch support for tests.
v2: do not add devices in wl_seat.name event. Collect first
all wl_seats and then pick the one that we need and
destroy the rest. The effect is the same, but this code
is better understandable.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We used hard-coded version 1 for all globals. For testing
newer methods and events we need use the current version
of global. This patch fixes this and adds missing
event handlers (for the events that were added in
versions > 1)
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This request simulates device creation/destruction from evdev (libinput)
v2: added support for touch. Touch is not supported yet,
but better be prepared
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make a little short-hand for the module directory.
This also cleans up the redefinition of BACKEND in the script.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
first is for getting and binding to globals and the other one is for
getting wl_shm.formats that are emitted after binding
to wl_shm
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a new Weston plugin under tests/ for manual testing of the
surface-shooting API.
The debug key binding 'h' triggers a surface shot from the surface that
currently has the pointer focus. The shot is written in PAM format into
a file. PAM format was chosen because it is dead-simple to write from
scratch and can carry an RGBA format.
Changes in v2:
- check fprintf calls, fix a malloc without free
- remove stride and format arguments from the API
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
wayland-test isn't and will never be wayland protocol, it's weston internal.
Renamed wayland-test to weston-test, and wl_test to weston_test.
Also added a Big Fat Warning to the description of weston_test to try to
keep people from thinking it's a good idea to use some of these functions
outside of testing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
weston-test uses eglBindWaylandDisplayWL and friends, which are defined
either by the EGL implementation, or weston-egl-ext.h as a fallback.
Include weston-egl-ext.h from weston-test, so we can build on systems
whose native EGL implementation doesn't give us the needed defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
The old xwayland-test hasn't worked in a while...
This new test checks that the wayland specific WL_SURFACE_ID atom exists,
checks that the window manager name is "Weston WM" and then maps a window
and waits for an exposure event.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
This skips the test when running on the headless backend.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
(Presumably) Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Decode the new feedback flags.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Since this is an inlined function, move it to a common header file.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Mostly remove headers that aren't actually needed for anything.
Add stdint.h to permit dropping xf86drm.h, which is otherwise unneeded.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tests will now return the extra command line parameters they need
when run with --params
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add tests for triggering the role conflict when a wl_surface is already
a wl_shell_surface and then attempted to be made into a sub-surface, and
vice versa.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
