Passing the backend as a parameter to the weston_backend function
pointers seems more natural and will be very useful once there can be
more than one backend.
Since all backends already store a pointer to the compositor instance,
replace the compositor parameter with the backend in all functions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We are assuming that CRTC_CTM is pass-through, so better ensure it
really is pass-through rather than whatever the previous KMS client left
there.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We are assuming that CRTC_DEGAMMA_LUT is pass-through, so better ensure
it really is pass-through rather than whatever the previous KMS client
left there.
This too falls under deprecated_gamma_is_set check, because the legacy
gamma could use either GAMMA or DEGAMMA.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We are assuming that gamma LUT is pass-through, so better ensure it
really is pass-through rather than whatever the previous KMS client left
there.
Unfortunately the legacy ioctl does not offer any way to reset the LUT
without actually crafting an identity LUT.
If the legacy gamma libdrm function indicates the feature is not
supported, do not try to use it again. This avoids hammering the legacy
gamma every frame when deprecated drm_output_set_gamma() is not used.
drm_output_set_gamma() is not updated to check/set this flag in order to
maintain its old behavior.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We are assuming that CRTC_GAMMA_LUT is pass-through, so better ensure it
really is pass-through rather than whatever the previous KMS client left
there.
Unfortunately, we have old drm_output_set_gamma() API that cms-static
and cms-colord plugins are using. To avoid trampling over them, do not
touch gamma after they did. Those plugins are deprecated, so there is no
reason to make set_gamma work through atomic.
drm_output_set_gamma() is called from weston_compositor_add_output()
through the output_created_signal. This is after drm_output_enable() and
before any KMS modeset or atomic commit on the CRTC. Therefore it is not
possible that there would be any KMS action in flight when
drm_output_set_gamma() is called, and so setting deprecated_gamma_is_set
should be non-racy - like setting CRTC_GAMMA_LUT itself.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Move the debug printing before the bail-out if the property does not
exist. This means that trying to set a missing property will be logged,
and it can be identified by the property id being 0.
We are starting to program more KMS properties, and if KMS state
building fails, this gives better chances to figure out what happened.
For example, if we accidentally assume that some property always exists
when it doesn't.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We've passed the paint node deeply enough that we can now use the cached
matrix in it to save some calculations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Rename it as well.
By passing the paint node we'll have access to the cached buffer to output
matrix later.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Make sure dep_egl is always a valid dependency object, even if not
found. Ensure it is not found when not wanted, to avoid linking when
found but not wanted.
Using a not-found dependency in Meson is defined to be a safe no-op, so
use that to simplify the backend dependencies.
libweston/meson.build already errors out if renderer-gl is enabled and
EGL is not found, so the same checks can be removed from the backends.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Compositor code can use opaque pointer comparison to determine whether
a head belongs to a given backend. Store a backend pointer in struct
weston_head to enable the compositor to select the correct backend
specific output configuration code.
This also allows to use the backend pointer instead of the opaque
backend_id pointer to check whether a head belongs to a backend, so
replace the checks in all to_xyz_head() functions and drop backend_id.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Now that the renderer type is stored in struct weston_renderer,
use that instead of use_pixman to determine the renderer type.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This implements the basics of the new screenshooting protocol. The
actual pixel operations will be implemented separately in the renderers
and DRM-backend.
See the previous commit "protocol: new screenshooter protocol" for why.
If DRM-backend needs more from weston_capture_task when it implements
writeback screenshooting, it will be easy to add user_data or expose
weston_capture_task::link for the backend to use. Those were not added
yet because it is uncertain what is actually needed.
The DRM-backend no-damage optimization requires special handling here as
well. See also 7f1a113c89 .
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Instead of bailing based on our loosely tracked matrix "type" (that won't
recognize when an operation is reversed by its inverse) use the new
weston_matrix_to_transform to determine if the matrix reasonably matches.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Before this patch, when a new head is found its information is printed
first as "updated" and then as "found" in the log.
The reason is that drm_head_create() calls drm_head_update_info() which
printed the head as "changed". Then drm_head_create() itself prints it
as "found".
This fixes it to print only once as "found".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Some monitors expose a selector for the kind of content that will get
displayed, allowing them to optimise their settings for this particular
content type.
I got access to such a monitor, sadly even setting it to game mode
didn’t lower its atrocious latency, but drm_info[1] reports it to be set
correctly so hopefully it’ll work better with other monitors.
[1] https://github.com/ascent12/drm_info
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
This changes the GL-renderer interface to pass the initial framebuffer
size and compositing area explicitly. All backends are changed to
provide the correct parameters.
GL-renderer mostly does not yet use these values, but later patches
will. The pbuffer path uses it already, because they replaced the
existing fields.
All this is to make GL-renderer aware of the different sizes, so it can
implement the future revision of the screenshooting API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In a journey to decouple renderer from weston_output, pass the initial
framebuffer size to Pixman-renderer explicitly.
Now Pixman-renderer will never look into weston_output::current_mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Except the module dir path, they're one and the same. This change
warrants a libweston version bump, if it hasn't been done already.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Replace all uses of weston_transform_region with
weston_matrix_transform_region, then remove the function completely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
The planes in the plane_list must be sorted from largest zpos_max to smallest.
Currently the plane order is only correct when the planes are already ordered
and added starting with the smallest zpos_max. This works accidentally in most
cases because the primary plane is usually first and there is often only one
overlay plane or the zpos is sufficiantly configurable.
To fix this, insert a new plane before the first plane with a smaller zpos_max.
And if none is found, insert it at the end of the list.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Changing the mode will destoy the GBM surface for the output. As a result all
corresponding BOs are deleted regardless of the drm_fb refcount.
While a commit is pending, the last_state may contain a reference to such a BO.
So delay the mode switch until the commit is finished and the reference is
release.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When an atomic commit fails then the output will be stuck in
REPAINT_AWAITING_COMPLETION state. It is waiting for a vblank event that was
never scheduled.
If the error is EBUSY then it can be expected to be a transient error. So
propagate the error and schedule a new repaint in the core compositor.
This is necessary because there are some circumstances when the commit can fail
unexpectedly:
- With 'state_invalid == true' one commit will disable all planes. If another
commit for a different output is triggered immediately afterwards, then this
commit can temporarily fail with EBUSY because it tries to use the same
planes.
- At least with i915, if one commit enables an output then a second commit for a
different output immediately afterwards can temporarily fail with EBUSY. This
is probably caused by some hardware interdependency.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It is only enabled by a debug key binding, currently not tested at all,
and is seems it doesn't really work, so let's remove it. This also
removes it from the man page.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Since b38b735e20, 'backend-drm: Remove Pixman conditional
for keep_buffer' the Pixman renderer keeps its own reference to buffers
when attached to surfaces, rather than flipping keep_buffer variable for
the surface. Problem is that when switching from the Pixman render to
the GL would not work and could result in a crash upon first repaint.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When an output is destroyed then the output state is freed immediately. In this
case, the plane state is only partially destroyed because it is the currently
active state. This includes the buffer reference.
Without the output, the plane will not be updated any more until it is used by a
different output (if possible) or the output returns and the plane is used
again.
As a result, the buffer reference is kept for a long time. This will cause some
applications to stall because weston now keeps two buffers (the one here and
another one for a different output where the application is now displayed).
To avoid this, do a synchronous commit that disables the output. The output
needs to be disabled anyways and this way the current state contains no
buffers that would remain.
`device->state_invalid = true` in drm_output_detach_crtc() is no longer
needed, because drm_output_detach_crtc() is called only when initialization
failed and the crtc was not yet used or in drm_output_deinit() when the
crtc was already disabled with the new synchronous commit.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This was introduced in a partial MR, where the later commits in the new
multi-GPU MR fully fix it, but the initially cherry-picked ones don't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This is another followup to ffc011d6a3
("backend-drm: check that outputs and heads are in fact ours") which missed
some places.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
There is missing dependency on linux-dmabuf-unstable-v1-server-protocol.h
header file in backend-headless, backend-drm and backend-x11. That files
do not depend on that header, in fact. But by this moment they've had
that implicit dependency due to linux-dmabuf.h header.
With specific set of meson configure options the protocol header is not
generated at the right time, what causes build error in 100% cases using
small amount of building threads (from -j1 to -j8).
Signed-off-by: Ivan Nikolaenko <ivan.nikolaenko@unikie.com>
This is a followup to ffc011d6a3
("backend-drm: check that outputs and heads are in fact ours") which missed
some places.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This uses the legacy DRM API it incomplete and no longer works anyways.
At this point, weston is no longer DRM master, so these calls fail with
"Permission denied".
So just remove the corresponding code.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
"max bpc" property is meant for working around faulty sink hardware.
Normally it should be set to the maximum possible value so that the
kernel driver has full freedom to choose the link bpc without being
artificially forced to lower color precision.
The default value is 16 because that is a nice round number and more
than any link technology I've heard is using today which would be 12.
Also offer an API set the value, so that weston.ini could be used in the
next patch for sink workaround purposes.
Closes: https://gitlab.freedesktop.org/wayland/weston/-/issues/612
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As a first step towards heterogeneous outputs, ignore other backends'
heads and outputs. This is done by checking the destroy callbacks for
heads and outputs.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Stop plugins from overwriting the struct weston_output::destroy vfunc,
as that will be used by backends to recognize their outputs.
Instead, pass a plugin-specific destroy callback when creating the
virtual output.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This reverts commit 6914064066.
This is a follow-up change of b623fd2a ("drm-backend: stop parsing IN_FORMATS
blobs, use libdrm instead"). Weston now has a hard-requirement on libdrm
2.4.108, clean up remaining and unnecessary conditional code. Change 69140640
("backend-drm: add HDR_OUTPUT_METADATA definitions") is no longer needed
and stop including libdrm-updates.h from kms-color.c.
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Before this change the drm-backend in Weston did the work of parsing DRM
blobs in order to query IN_FORMATS data, if available. This is also the
case for other DRM/KMS clients that use IN_FORMATS (i.e. X).
libdrm 2.4.108 with e641e2a6 ("xf86drm: add iterator API for DRM/KMS
IN_FORMATS blobs") introduced a dedicated API for querying IN_FORMATS data.
Bump the minimum required version to 2.4.108, stop parsing IN_FORMATS in
Weston and start using DRM iterators. In addition, remove fallback code for
libdrm <2.4.107.
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
The drm_device is initialized as a side effect of the (badly named)
drm_device_is_kms function. Explicitly pass the drm_device to be able to
initialize kms devices that are not the main drm device of the drm backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If we have multiple drm devices, we cannot use the drm device from the backend,
because we would only get the primary device and not the device of the output.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If Weston receives a hotplug event, it has to check if the hotplug device
actually belongs to the drm device before updating the heads of the device. The
hotplug event should only remove heads that belong to the device and must not
change heads of other devices.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The compositor lists the heads from all devices, but we must only disable the
connectors that belong to the current device. Therefore, other heads must be
ignored.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
