The code currently checked the return value of weston_config_section_get_bool()
which is incorrect. The return value of weston_config_section_get_bool() is
zero whether the config option is present or not, and it is non-zero in case
the config option is not present.
The code must check whether the config option is either true or false,
or in case the option is not present then default to false. Adjust the
code accordingly.
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
This adds "icc_profile" key support in [output] sections for backends
headless, x11, wayland, and drm, and also for remoted and pipewire
outputs FWIW. On the other hand, RDP-backend does not use output
sections from weston.ini, and fbdev-backend does not deserve anything
new (it wouldn't support color management anyway due to no GL-renderer).
This allows one to configure an ICC v2 or v4 file to be used as an
output profile. However, color-lcms does not actually use output
profiles yet, so trying this will fail until support is implemented.
The parent_winsys_profile argument is reserved for using the color
profile from a parent window system where applicable, if nothing else is
set in weston.ini. None of the nested backends provide an output color
profile yet. It is more of a reminder of a missing feature than a
serious implementation.
Note: cms-static Weston plugin uses the exact same weston.ini key for
loading VCGT from ICC profiles. If "color-management" option is set to
false, this new use of "icc_profile" is disabled and the old behavior
with cms-static is kept.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It will cause on following situation:
* Enable weston-simple-im
* It's also reproducible with IBus or Fcitx5
* Connect a mouse or a touch panel
* Don't connect keyboad
* Launch weston-editor and touch the text area
It doesn't reproduce with weston-keyboard because it doesn't use
grab_keyboard of input-method-context-v1.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Currently the screen sharing has to be manually started after weston has
started by pressing Ctrl+Alt+S on a keyboard. Add new bool config option
to the screen-share section which permits starting the screen sharing of
all outputs on weston start up. This is useful e.g. for doing screen
mirroring between two devices over network.
Signed-off-by: Marek Vasut <marex@denx.de>
input-method-v1 protocol provides two surface type for the input
panel, `toplevel` and `overlay`. But there is no example for the later
one. This change enables to set weston-keyboard as overlay panel by the
environment variable `WESTON_KEYBOARD_SURFACE_TYPE=overlay` to
demonstrate this feature. In Addition, add weston.ini option
`overlay-keyboard` to set it.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Add a command line option to disable the default flight recorders
so we can save a little bit of CPU and memory on systems where
this isn't necessary.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The value of the `path` parameter is executed right before
wl_display_run.
The `watch` parameter is meant for things like tests using
the headless backend and the kiosk shell.
Fixes https://gitlab.freedesktop.org/wayland/weston/-/issues/171
Signed-off-by: Alvarito050506 <donfrutosgomez@gmail.com>
Found by ASan:
Direct leak of 30 byte(s) in 1 object(s) allocated from:
#0 0x7f4dcf029810 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x3a810)
#1 0x7f4dcefd2143 in handle_option ../../git/weston/shared/option-parser.c:56
#2 0x7f4dcefd2473 in long_option ../../git/weston/shared/option-parser.c:84
#3 0x7f4dcefd2bb6 in parse_options ../../git/weston/shared/option-parser.c:175
#4 0x7f4dcefc7b0d in wet_main ../../git/weston/compositor/main.c:3229
#5 0x5593dfa38ffd in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#6 0x5593dfa3ca69 in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#7 0x5593dfa2e511 in fixture_setup ../../git/weston/tests/ivi-shell-app-test.c:139
#8 0x5593dfa2e596 in fixture_setup_run_ ../../git/weston/tests/ivi-shell-app-test.c:141
#9 0x5593dfa3d01e in main ../../git/weston/tests/weston-test-runner.c:661
#10 0x7f4dcec2d09a in __libc_start_main ../csu/libc-start.c:308
#11 0x5593dfa2d769 in _start (/home/pq/build/weston-meson/tests/test-ivi-shell-app+0xd769)
when running
ASAN_OPTIONS=fast_unwind_on_malloc=0,malloc_context_size=50 \
LSAN_OPTIONS=suppressions=/home/pq/git/weston/.gitlab-ci/leak-sanitizer.supp \
./tests/test-ivi-shell-app
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This reverts commit 81ef6d0ab3.
This also removes a bit from "tests: ensure color-lcms plugin loads".
Use of the shadow buffer is determined automatically based on
color transformations by the previous commit
"gl-renderer: use shadow framebuffer automatically".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Found by Address sanitizer on test-devices:
==10640==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000000580 at pc 0x7fa0f050dcd1 bp 0x7fff41c908e0 sp 0x7fff41c908d8
WRITE of size 8 at 0x60c000000580 thread T0
#0 0x7fa0f050dcd0 in unbind_input_method ../../git/weston/compositor/text-backend.c:852
#1 0x7fa0efd1b20d in destroy_resource ../../git/wayland/src/wayland-server.c:724
#2 0x7fa0efd1f7f1 in for_each_helper ../../git/wayland/src/wayland-util.c:372
#3 0x7fa0efd1fcde in wl_map_for_each ../../git/wayland/src/wayland-util.c:385
#4 0x7fa0efd1b35c in wl_client_destroy ../../git/wayland/src/wayland-server.c:883
#5 0x7fa0f050ea82 in text_backend_destroy ../../git/weston/compositor/text-backend.c:1067
#6 0x7fa0ebb69f2f in shell_destroy ../../git/weston/desktop-shell/shell.c:5012
#7 0x7fa0efd55933 in wl_signal_emit /home/pq/local/include/wayland-server-core.h:478
#8 0x7fa0efd7d061 in weston_compositor_destroy ../../git/weston/libweston/compositor.c:7896
#9 0x7fa0f050a349 in wet_main ../../git/weston/compositor/main.c:3493
#10 0x559c1e794354 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#11 0x559c1e797dc0 in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#12 0x559c1e786ab8 in fixture_setup ../../git/weston/tests/devices-test.c:39
#13 0x559c1e786b3a in fixture_setup_run_ ../../git/weston/tests/devices-test.c:41
#14 0x559c1e798375 in main ../../git/weston/tests/weston-test-runner.c:661
#15 0x7fa0f016e09a in __libc_start_main ../csu/libc-start.c:308
#16 0x559c1e786769 in _start (/home/pq/build/weston-meson/tests/test-devices+0xc769)
0x60c000000580 is located 0 bytes inside of 120-byte region [0x60c000000580,0x60c0000005f8)
freed by thread T0 here:
#0 0x7fa0f0618fb0 in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.5+0xe8fb0)
#1 0x7fa0f050df1d in input_method_notifier_destroy ../../git/weston/compositor/text-backend.c:902
#2 0x7fa0efd86d77 in wl_signal_emit /home/pq/local/include/wayland-server-core.h:478
#3 0x7fa0efd98086 in weston_seat_release ../../git/weston/libweston/input.c:3475
#4 0x7fa0ebb0d002 in test_seat_release ../../git/weston/tests/weston-test.c:132
#5 0x7fa0ebb0e197 in device_release ../../git/weston/tests/weston-test.c:314
#6 0x7fa0efca88ed in ffi_call_unix64 (/lib/x86_64-linux-gnu/libffi.so.6+0x68ed)
previously allocated by thread T0 here:
#0 0x7fa0f0619518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7fa0f050a8bf in zalloc ../../git/weston/include/libweston/zalloc.h:38
#2 0x7fa0f050e6f1 in text_backend_seat_created ../../git/weston/compositor/text-backend.c:1011
#3 0x7fa0f050e947 in handle_seat_created ../../git/weston/compositor/text-backend.c:1040
#4 0x7fa0efd86d77 in wl_signal_emit /home/pq/local/include/wayland-server-core.h:478
#5 0x7fa0efd97d57 in weston_seat_init ../../git/weston/libweston/input.c:3440
#6 0x7fa0ebb0ce4b in test_seat_init ../../git/weston/tests/weston-test.c:110
#7 0x7fa0ebb0f699 in wet_module_init ../../git/weston/tests/weston-test.c:592
#8 0x7fa0f04f8d69 in wet_load_module ../../git/weston/compositor/main.c:941
#9 0x7fa0f04f914d in load_modules ../../git/weston/compositor/main.c:1012
#10 0x7fa0f0509ec1 in wet_main ../../git/weston/compositor/main.c:3441
#11 0x559c1e794354 in execute_compositor ../../git/weston/tests/weston-test-fixture-compositor.c:432
#12 0x559c1e797dc0 in weston_test_harness_execute_as_client ../../git/weston/tests/weston-test-runner.c:528
#13 0x559c1e786ab8 in fixture_setup ../../git/weston/tests/devices-test.c:39
#14 0x559c1e786b3a in fixture_setup_run_ ../../git/weston/tests/devices-test.c:41
#15 0x559c1e798375 in main ../../git/weston/tests/weston-test-runner.c:661
#16 0x7fa0f016e09a in __libc_start_main ../csu/libc-start.c:308
Fix UAF by resetting wl_resource user data, and ensuring it is valid
before used.
Setting seat->input_method to NULL may not be necessary since it is
being called from seat destroy listener, but added just in case.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since commit "libweston: add required_capabilities test suite quirk"
a new function that depends on test_data is being called in wet_main().
We should check if test_data is NULL before calling it, otherwise
we have a segfault when running outside the test suite.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This allows tests to skip when required capabilities are not present.
The output damage test for the shadow buffer case needs this.
required_capabilities is added to struct weston_testsuite_quirks which
is libweston public API just because there is no better place currently.
This is a little weird because the code to check it is in compositor,
not libweston.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The capability strings will be printed also in another occasion, where
the colon does not fit with the capability description.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds an output section option use-renderer-shadow in weston.ini.
This option is only recognized with headless and DRM backends, because
it requires GL-renderer and does not support resizing outputs.
The option is called use-renderer-shadow because this is what it does
right now. In the future the same setting will be used to turn on more
complex image processing when operational pieces required for color
management land. Once color management is implemented, this option is
expected to be removed. This option allows developer testing of features
to be used to implement color management.
This is a rewrite of "weston.ini: introduce use-shadow-fbo in output
config" by Harish Krupo. The main.c code is structured differently, the
weston.ini option is renamed, and the man page paragraph is moved to
weston.ini.man with different content.
Cc: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds the libweston capability bit for "color operations" which
refers to a renderer's support for operations needed for color
management. GL-renderer will grow the support while Pixman-renderer will
not, which is why the cap is needed.
To make an example use of the cap, this also adds new API:
weston_output_set_renderer_shadow_buffer(). This is a temporary API to
enable future experimental features. The first such feature will be the
renderer internal shadow buffer, the boolean variable for it taken from
Harish Krupo's "weston.ini: introduce use-shadow-fbo in output config".
Obviously this patch does not implement the renderer shadow buffer. No
renderer sets WESTON_CAP_COLOR_OPS yet so trying to enable it will fail.
The documentation here is deliberately vague, because the bits needed
for color management will come in trickling for a long time until we can
call it color management in any sense. Until then, the temporary API
shall remain, perhaps poorly named.
Cc: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
shm buffer should be freed in case of `out_pixman_error`, and should
be inserted into shared_output just before the success return.
Signed-off-by: xndcn <xndchn@gmail.com>
The buffer created for flight recorder, the allocations done in 'logger' and
'flight_rec' subscribers were not freed when wl_display_create() fails. So
move them to out_display
Signed-off-by: Anurup M <anurup.mokkil@gmail.com>
Without this patch, the DRM-backend would rewrite the 'require-input',
core section option given by the user.
This removes 'continue_without_input' DRM-backend option and takes into
consideration the cmd line option only if that was passed (Pekka Paalanen).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Until now we had the test quirks initialization in wet_main(),
just after calling weston_compositor_create(). But there are
some cases that require the quirks during struct weston_compositor
creation time.
Move test quirks initialization to weston_compositor_create()
in order to cover more use cases for the test quirks mechanism.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
We have two functions with the name weston_screenshooter_shoot():
1. screenshot protocol function that the screenshooter
client uses to request screenshots to the compositor
2. libweston function used by the compositor to take
screenshots as requested by the screenshooter client
Until now we had no problem with that, but in the next commits
we are going to use the screenshot protocol in the test suite,
which is also user of libweston. So rename screenshot protocol
function to weston_screenshooter_take_shot() to avoid the conflict.
For consistency, also rename screenshooter_shoot() to
screenshooter_take_shot() in compositor/weston-screenshooter.c
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Until now we had struct wet_testsuite_data as an opaque
struct that should be defined by the testsuite of libweston
users. Instead, keep the data as a void * and document that
users are responsible for defining the data type.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are some specific cases in which we need Weston to
behave differently when running in the test suite. This
adds a new API to allow the tests to select these behaviors.
For instance, in the DRM backend we plan to add a writeback
connector screenshooter. In case it fails for some
reason, it should fallback to the renderer screenshooter
that all other backends use. But if we add a test to
ensure the correctness of the writeback screenshooter,
we don't want it to fallback to the renderer one, we
want it to fail. With this new API we can choose to
disable the fallback behavior specifically for this test.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This was forgotten in "weston: remove SEGV and ABRT handlers". It is
unused.
Fixes: bb707dc0fe
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This commit alters the way that Weston picks a Wayland display socket
name. Instead of using wl_display_add_socket_auto to look for the first
available name in wayland-0, wayland-1, .... to wayland-32, the code now
checks names wayland-1, wayland-2, .... up to wayland-32.
This change is a workaround for a suboptimal behavior of
libwayland-client. If a client program calls wl_display_connect(NULL) and
the WAYLAND_DISPLAY environment variable is not set, then the program will
by default try to connect to 'wayland-0'. This is a problem when a
computer has a running Wayland compositor but is being accessed in some
other fashion, such as through an X session on a different virtual
terminal, over ssh, etc. Client programs launched through those means may
attempt to connect to an unrelated compositor. Changing libwayland
behavior to remove the default would also work, but a) libraries have
stronger backward compatibility expectations b) that would likely break
more people's setups than just changing Weston would.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
directory
Weston is also a user of the plug-ins, so make use of it. With this
change we unconditionally install the plug-in headers even though
libweston might not be built with support for them.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The missing build dependency was added. The override to disable this
check can be removed.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
cms-colord uses cms-helper functions which require lcms2. Therefore,
lcms2 must be added as a build dependency.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
In the test suite we may want to run a DRM-backend test on a
non-default seat, which may not have a input device associated.
Weston's default behavior is to not open if input devices are
not found, as it may cause troubles. For instance, Weston can
open but if no input device is set than the user can not
interact or leave it.
Add flag --continue-without-input to DRM-backend so we can run
these types of tests with no input. Notice that this won't force
the compositor to skip opening a input device if it finds it on
the non-default seat.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
If users ask explicitly to log to a file, it makes sense to quit
when we fail opening that file. Continuing execution would mean
wasting users' time if they expect to find the log file at the
end of the session.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When failing to open the log file nothing is reported to the user,
therefore we print a message on stderr when that happens.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As in aaf35586f4, we want to fail when we are passed an invalid
transform name, not just blindly configure on using the normal
transform. The previous commit missed the callsite from the headless
backend's command-line parsing.
Fix this so that headless fails when an invalid transform is specified
on the command line.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If the output only has a single weston_head attached to it, take its
declared transform as the default transform.
With the previous patches, this allows a device declaring the KMS 'panel
orientation' property (e.g. through DeviceTree) to autoconfigure to the
correct display rotation when running Weston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If an invalid transformation is provided for an output, fail the output
configuration rather than continuing on using whatever we chose as the
default transform.
After !383, this will result in configurations using the old definition
failing and exiting, rather than continuing on the wrong way around.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Regardless of the default transform passed in, weston_parse_transform
would always return 'normal' if there was an output section. This is
because, if a section was declared for that output, it would ask
weston_config for the transform, with the default being 'normal'.
Fix it so we return the passed-in default transform when we have a
matching output section without a transform key. If the transform is
declared but invalid, we can remove the line resetting to the default
transform, because we've already set the default transform up top.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The test suite wants to start using different output scales, and this is the
easiest API to configure it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It was discovered in issue #99 that the implementations of the 90 and 270
degree rotations were actually the inverse of what the Wayland specification
spelled out. This patch fixes the libweston implementation to follow the
specification.
As a result, the behaviour of the the weston.ini transform key also changes. To
force all users to re-think their configuration, the transform key values are
also changed. Since Weston and libweston change their behaviour, the handling
of clients' buffer transform changes too.
All the functions had their 90/270 cases simply swapped, probably due to
confusion of whether WL_OUTPUT_TRANSFORM_* refers to rotating the monitor or
the content.
Hint: a key to understanding weston_matrix_rotate_xy(m, c, s) is that the
rotation matrix is formed as
c -s
s c
that is, it's column-major. This fooled me at first.
Fixing window.c fixes weston-terminal and weston-transformed.
In simple-damage, window_get_transformed_ball() is fixed to follow the proper
transform definitions, but the fix to the viewport path in redraw() is purely
mechanical. The viewport path looks broken to me in the presence of any
transform, but it is not this patch's job to fix it.
Screen-share fix just repeats the general code fix pattern, I did not even try
to understand that bit.
https://gitlab.freedesktop.org/wayland/weston/issues/99
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Before commit "weston-log: destroy subscriptions with
destruction of subscribers", we had to destroy subscribers
before the log context. Currently there's no required order,
both are valid.
But since we've created log context before the subscribers,
we can destroy it after them. This is a style change and
also a prove that now this order is valid as well.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Log subscriber API is not type-safe. File and flight recorder
subscribers are created with functions that return
weston_log_subscriber objects. But there's a problem: to destroy
these objects you have to call the right function for each type
of subscriber, and a user calling the wrong destroy function
wouldn't get a warning.
Merge functions that destroy different types of subscribers, making
the log subscriber API type-safe.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The cms-static, desktop-shell, hmi-controller, ivi-shell, and screen-share
modules use symbols from libexec_weston, e.g.:
$ ldd /usr/lib/x86_64-linux-gnu/weston/desktop-shell.so | grep "not found"
libexec_weston.so.0 => not found
Loading these modules from weston happens to work because the weston executable
itself links against libexec_weston, and has an rpath set. Still, these modules
depend on a library in a non-standard location. Adding an rpath could help
static checkers to make sure all shared objects' dependencies are present.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
`no_outputs` is declared on the stack and left uninitialized if no
weston option changing its value is provided.
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Allow to set and get one opaque pointer. The test suite will then use this to
pass data from the test runner to the test plugin, so that the plugin can then
run what it needs to. This is useful when the test runner calls wet_main()
directly instead of forking a compositor.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The only reason why we have both weston_compositor_tear_down() and
weston_compositor_destroy() is that the only we had to destroy
the log context was keeping weston_compositor alive and calling
weston_log_ctx_compositor_destroy().
After commit "weston-log: replace weston_log_ctx_compositor_destroy()
by weston_log_ctx_destroy()", it's not necessary to keep a zombie
weston_compositor just to be able to call
weston_log_ctx_compositor_destroy().
Fold weston_compositor_tear_down() into weston_compositor_destroy(),
as this split is useless now.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The function weston_log_ctx_compositor_destroy(), which destroys struct
weston_log_context, takes weston_compositor as argument. We may have a
weston_log_context unlinked from a weston_compositor and currently there
is no way to destroy it.
Add function weston_log_ctx_destroy(), what makes the destruction of
weston_log_context independent of weston_compositor.
With this change, one could destroy a weston_compositor and keep the
related weston_log_context (since now weston_log_context can be destroyed
without the need of a weston_compositor). But if weston_compositor gets
destroyed it's also necessary to destroy weston_log_context::global,
as the debug protocol depends on the compositor. So a listener has been
added to the destroy signal of weston_compositor.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Since weston_log_ctx_compositor_create() does not have any relation
with weston_compositor, rename it to weston_log_ctx_create().
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_log_scope_destroy()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_scope_destroy(), as the argument is a
struct weston_log_scope.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
There's a function named weston_compositor_add_log_scope()
but it doesn't take a struct weston_compositor argument.
Rename it to weston_log_ctx_add_log_scope(), as
the log_scope is being added to a log_context.
Also, bump libweston_major to 9.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Define the void pointer as pixman_region32_t instead of using it
directly.
Void pointers are used by generic API's so each user can define
a data type as needed. Not doing this is dangerous, since void
pointers implicitly cast from/to any pointer without giving
warnings. So we must define its type instead of using it directly
in a function call.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
When option-parser is confronted with a boolean option, have it write a
bool rather than treating the value as a pointer to an int32.
(lib)weston already heavily uses bool types internally, so this has the
nice side effect of eliminating quite a few local variables which only
existed as integer shadows of internal boolean variables.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Wayland innovated a lot of cool things, but non-binary boolean values is
the great advances of our time.
Make config_parser_get_bool() work on boolean values, and switch all its
users.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of getting previous_damage from the weston_output struct, get it from
the frame_signal data argument. This will make possible to remove
previous_damage from weston_output after we decide what to do with
output->previous_damage usage in DRM backend.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
This is necessary for the test harness to be able to execute the compositor
multiple times in the same process. As we never unload opened modules, the
first compositor iteration will leave them all loaded and following compositor
iterations will then have them already loaded.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This introduces a new convention of checking through the compositor destroy
listener if the plugin is already initialized. If the plugin is already
initialized, then the plugin entry function succeeds as a no-op. This makes it
safe to load the same plugin multiple times in a running compositor.
Currently module loading functions return failure if a plugin is already
loaded, but that will change in the future. Therefore we need this other method
of ensuring we do not double-initialize a plugin which would lead to list
corruptions the very least.
All plugins are converted to use the new helper, except:
- those that do not have a destroy listener already, and
- hmi-controller which does the same open-coded as the common code pattern
did not fit there.
Plugins should always have a compositor destroy listener registered since they
very least allocate a struct to hold their data. Hence omissions are
highlighted in code.
Backends do not need this because weston_compositor_load_backend() already
protects against double-init. GL-renderer does not export a standard module
init function so cannot be initialized the usual way and therefore is not
vulnerable to double-init.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was forgetting to remove the compositor destroy listener, which would lead
to use-after-free on compositor tear-down especially on cms-colord init failure
paths. Found by inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Increase the buf size such it can accomodate sufficiently large local
buffers. Spotted whilst looking for something else.
../compositor/main.c:157:22: warning: ‘%s’ directive output may be
truncated writing up to 511 bytes into a region of size 128
[-Wformat-truncation=]
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~ ~~~~~~~
../compositor/main.c:157:21: note: directive argument in the range
[-9223372036854775, 9223372036854775]
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~~~~~~~~~~~~~
../compositor/main.c:157:2: note: ‘snprintf’ output between 7 and 659
bytes into a destination of size 128
157 | snprintf(buf, len, "%s[%s.%03li]", datestr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
158 | timestr, (tv.tv_usec / 1000));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This fixes the situation where the same logger scope is passed multiple
times and the timestamp is being sent before the log mesasge.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This wasn't intentional it just kept the way it was done before.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
All these plugins use symbols that were exported by the weston executable and
are now exported by libexec-weston.so. Linking these to libexec-weston.so fixes
unresolved symbols.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is preparation for disallowing unresolved symbols project-wide.
This is a temporary fix that should be reverted and fixed properly later.
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_set_color_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:79: undefined reference to `cmsReadTag'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:91: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:92: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: /home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:93: undefined reference to `cmsEvalToneCurveFloat'
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_destroy_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:108: undefined reference to `cmsCloseProfile'
/usr/bin/ld: compositor/fb12c4d@@cms-colord@sha/cms-helper.c.o: in function `weston_cms_load_profile':
/home/pq/build/weston-meson/../../git/weston/compositor/cms-helper.c:131: undefined reference to `cmsOpenProfileFromFile'
See also #263
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This takes everything that was in 'weston' the executable a turns it into
library. A new trivial 'weston' executable is written.
Creating the library will allow future improvements:
- we can link weston plugins against the library, meaning that they no longer
need unresolved symbols to be allowed during linking
- tests do not have to fork() and exec() 'weston', they can just link to the
library and call wet_main() after setting things up; this will help with
using a debugger
install_rpath is set so that we can install the library into weston's module
directory, away from the normal libraries in a system. This is one library we
do not intend for others to use.
The library has no stable ABI and is not versioned.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As 'new_subscription' can create additional objects, 'destroy_subscription'
will be needed when cleaning up.
As this requires a libweston_major bump (noticed by @pq), bump it up to
8.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When hotunplugging a display, the compositor will tear the top-level
wet_output object down, freeing its memory.
However, destruction of the backend output might be delayed in certain
situations (e.g. destroying DRM output while in the middle of a page
flip).
When the backend output is finally destroyed, it will trigger a
destruction callback previously added by the compositor, which point to
data belonging to the top-level wet_output object.
In order to avoid access to invalid data when the backend output is
destroyed after the top-level wet_output object, remove the destruction
callback from the corresponding list before freeing the object.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Otherwise 'log_extensions()' will not know how to properly format the
data.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The function pixman_blt may return false in case there is no
accelerated blit function available. In this case the remote shared
screen stays black.
This has been observed on Weston compiled for aarch64. In currrent
pixman 0.38.4 there is no accelerated pixman_blt function for
aarch64 available.
Use pixman_image_composite32 instead which is guaranteed to have a
working fallback implementation.
Fixes: #253
Signed-off-by: Stefan Agner <stefan@agner.ch>
Calculate damage region after resizing the cache image. This
avoids unnecessary calculation of damaged regions on resize,
makes sure that the whole screen is considered damaged on
resize and simplifies error handling.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Calculate y_orig separately first makes it easer to understand the
code and aligns with how pixels are read in screenshooter.c.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Destroy seats when they get removed. This makes sure that seats
properly disappear when screen-share RDP clients disconnect.
There will be no excessive amount of mouse pointer anymore after
several client connection/disconnections.
Signed-off-by: Stefan Agner <stefan@agner.ch>
It is quite similar to the remoting plugin. It just exports the frames via
pipewire instead of the builtin GStreamer pipeline.
It implements the same virtual output API. Virtual outputs can be created
by adding 'pipewire-output' sections to weston.ini.
The generated frames can be accessed with any pipewire client. e.g. with
GStreamer:
gst-launch-1.0 pipewiresrc ! video/x-raw,format=BGRx ! ...
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Place the subscribe parts and displaying of available scopes out of
main as it makes no sense to keep them there.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Uses (debug key-binding mod+shift+space) KEY_D to display/dump
the contents of the flight recorder.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Logging should start as early as possible so create the log scope as
early as possible, before subscribing to it.
Open the logfile before creating the 'logger' subscriber, making sure
we're logging to the file properly.
Also migrate `weston_log_set_handler()` to avoid potential calls to
`weston_log` before installing the log handler.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Pass log scopes from the command line to subscribe log scopes
dynamically to the 'logger' subscriber.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
config-parser.h is a helper API that libweston core must never depend on. Using
it is a compositor frontend decision.
Including it in libweston.h would give the wrong message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Allow a gstreamer pipeline to be configurable via an weston.ini. It is
necessary that source is appsrc, its name is "src", and sink name is
"sink" in pipeline. Also, remoting plugin ignore port and host
configuration if the gst-pipeline is specified.
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
By default the client communicates its preference with regards to
compression to the server. However, some clients always use
compression, which is not ideal for certain environments (e.g.
low performance embedded devices in a local network with plenty
of bandwidth). Allow to disable compression server-side which will
override the clients request for compression.
Signed-off-by: Stefan Agner <stefan@agner.ch>
We were testing the wrong variable to see if output creation had failed:
instead of testing the return of the function we'd just called, we were
testing something we'd already checked earlier.
Signed-off-by: Daniel Stone <daniels@collabora.com>
WESTON_OPTION_BOOLEAN takes a pointer to an int as an argument, but
there were several cases of being passed a pointer to a bool instead.
This changes it to use a local int instead, and then write that value to
the bool.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
As we transition towards a more generic API for weston loggging
framework rename weston_debug_compositor to weston_log_context to show
the fact that this is not really debug but a logging context.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This patch allows initialization of weston-debug/log framework much earlier
than weston_compositor, which in turn will provide the option start
logging before weston_compositor has been created.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The printf() format specifier "%m" is a glibc extension to print
the string returned by strerror(errno). While supported by other
libraries (e.g. uClibc and musl), it is not widely portable.
In Weston code the format string is often passed to a logging
function that calls other syscalls before the conversion of "%m"
takes place. If one of such syscall modifies the value in errno,
the conversion of "%m" will incorrectly report the error string
corresponding to the new value of errno.
Remove all the occurrences of the specifier "%m" in Weston code
by using directly the string returned by strerror(errno).
While there, fix some minor indentation issue.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
This is an installed public header, and without the subdir would surely
conflict with something else.
include/libweston/meson.build is necessary for putting the generated header in
the right subdirectory so that '#include <libweston/version.h>' can work.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It is a public installed header used by libweston.h.
See "Rename compositor.h to libweston/libweston.h" for rationale.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The backend headers are renamed from compositor-foo.h to backend-foo.h to
better describe their purpose. These headers are public libweston API for each
specific backend.
The headers will also be used like
#include <libweston/backend-drm.h>
instead of
#include <compositor-drm.h>
to give them a more explicit namespace.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The main idea is to make libweston users use the form
#include <libweston/libweston.h>
instead of the plain
#include <compositor.h>
which is prone to name conflicts. This is reflected both in the installed
files, and the internal header search paths so that Weston would use the exact
same form as an external project using libweston would.
The public headers are moved under a new top-level directory include/ to make
them clearly stand out as special (public API).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
build path ends in the final binary package causing the
build not to be reproducible byte-by-byte.
Reference:
https://bugs.debian.org/899358
Signed-off-by: Héctor Orón Martínez <zumbi@debian.org>
Weston 6.0.0 was released with both autotools and Meson build systems. That
should be enough for downstream to migrate to Meson build on their on pace.
Maintaining two build systems is a hassle, keep the one that is easier to work
with and let the other one go.
doc/dozygen/tool*.doxygen.in are not deleted, because they have not been
integrated with Meson yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
cms-colord.c calls things like g_string_free() and g_object_unref(), so it
needs to link glib-2.0 and gobject-2.0 explicitly, instead of relying on colord
pkg-config bringing them in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We loaded the use-pixman configuration value from both the command line
and the configuration file, but completely ignored the former. Make sure
we actually use both.
Tested with all permutations of config/command line.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When building screen-share module with meson loading the module
fails with:
[00:01:28.604] Failed to load module: /usr/local/lib/weston/screen-share.so: undefined symbol: os_create_anonymous_file
Failed to process Wayland connection: Broken pipe
failed to create display: Broken pipe
The function os_create_anonymous_file is defined in libshared,
adding libshared to the dependency makes sure the function gets
compiled into screen-share.so.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/208
Signed-off-by: Stefan Agner <stefan@agner.ch>
If xwayland is disabled, compositor/weston is built without
compositor/xwayland.c, which defines wet_load_xwayland.
compositor/fb12c4d@@weston@exe/main.c.o: In function `main':
../weston-5.0.0-169-g2d4cc4f4dd6a/compositor/main.c:3103: undefined reference to `wet_load_xwayland'
Provide an empty stub for wet_load_xwayland if xwayland is disabled.
With that we also have to remove xwayland.c from the autotools build
if xwayland is disabled, to avoid a multiple definition error.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is so that, for instance, people using weston as their main Wayland
compositor can invert the sense of two finger scrolling or change
pointer acceleration using weston.ini, rather than having to edit C
code.
All of the options that libinput itself exposes through its API are now
exposed in weston.ini. The new options are called `tap-and-drag`,
`tap-and-drag-lock`, `disable-while-typing`, `middle-emulation`,
`left-handed`, `rotation`, `accel-profile`, `accel-speed`,
`scroll-method`, `natural-scroll`, and `scroll-button`. I have
successfully tested everything except for `rotation`, out of a lack of
hardware support.
weston now depends directly on libevdev for turning button name strings into
kernel input codes. This was needed for the `scroll-button` config
option. (weston already depends indirectly on libevdev through
libinput, so I figured people would be OK with this.) As a practical
matter for debian-style packagers, weston now has a build dependency on
libevdev-dev.
Right now, the code applies the same options to all attached devices
that a given option is relevant for. There are plans for multiple
[libinput] sections, each with different device filters, for users who
need more control here.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
This is to increase consistency in config option naming in weston.ini.
(Prefer hyphens over underscores to separate words.)
If enable_tap is present in weston.ini, an obnoxious error message is
logged with weston_log(). In terms of configuration, if enable-tap is
present, enable_tap is ignored.
Signed-off-by: Eric Toombs <3672-ewtoombs@users.noreply.gitlab.freedesktop.org>
Pixman can be used for rendering if the default GLESv2 rendering
is broken or cannot be used.
Pixman-based rendering is already available with the command-line
switch '--use-pixman'. This patch adds support for this option to
the configuration file. Putting
[core]
use-pixman=true
into 'weston.ini' enables pixman-based rendering for all backends
that support it. With this change, pixman has to be enabled only
once.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/27
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Meson links with the C compiler, not the raw linker.
With clang+LLD, the bare flag would be ignored.
Signed-off-by: Greg V <greg@unrelenting.technology>
Previously weston-screenshooter was installed in LIBEXECDIR, but given
that now it can be invoked by the user whenever debug protocol is
enabled, let's intall it into BINDIR. This way, it can be invoked
without the need to modify PATH.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
This allows to possibility to specify where to look for the executable
but also simplifies the need of having to pass either BINDIR/LIBEXECDIR
for retrieving full-path of the executable.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Screenshots of the outputs can only be taken by having a keyboard
plug-ed in, as to avoid potential malicious intent. On the other hand,
this is problematic as there are cases where a keyboard cannot
be used as a input device. A particular use-case is that for
multiple devices it can be cumbersome to connect a keyboard such
that using ssh can be much easier and can be further automated.
This patch allows taking screenshots without the need of having a
keyboard connected when debug protocol is enabled.
Add also a few words about the fact that this is a serious issue
and can lead to silently leaking the output contents.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Meson is a build system, currently implemented in Python, with multiple
output backends, including Ninja and Make. The build file syntax is
clean and easy to read unlike autotools. In practise, configuring and
building with Meson and Ninja has been observed to be much faster than
with autotools. Also cross-building support is excellent.
More information at http://mesonbuild.com
Since moving to Meson requires some changes from users in any case, we
took this opportunity to revamp build options. Most of the build options
still exist, some have changed names or more, and a few have been
dropped. The option to choose the Cairo flavour is not implemented since
for the longest time the Cairo image backend has been the only
recommended one.
This Meson build should be fully functional and it installs everything
an all-enabled autotools build does. Installed pkg-config files have
some minor differences that should be insignificant. Building of some
developer documentation that was never installed with autotools is
missing.
It is expected that the autotools build system will be removed soon
after the next Weston release.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This registers a new weston-debug scope "log" through which one can get
live log output interspersed with possible other debugging prints. This
is implemented by passing the format and varargs received in our usual
logging entrypoints through to the debug scope as well.
Anywhere where the varargs set is used twice (once for vfprintf, another
for the debug scope), we copy the va_list in order to avoid reusing it,
which leads to memory safety issues.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Let users enable the compositor debug protocol on the compositor command
line. This allows weston-debug tool to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We've always had "send_keymap" internally, but some places failed to use
it. Since we also use this in the text backend, export it.
Reviewed-by: Daniel Stone <daniels@collabora.com>
During de-init ensure removal of added signals from list. Otherwise
a dongling pointer is left behind which will affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The framebuffer backend now detects the framebuffer device
dynamically. Don't assume that the framebuffer device is /dev/fb0
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows the fbdev backend to run on, and use devices from the
specified seat, similar to the drm backend.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow the seat to be set by the environment as pam_systemd typically
sets the XDG_SEAT variable
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Add a new boolean output section key "force-on". When set to true, the
output will be enabled regardless of connector status. This is the
opposite of the mode=off setting.
Forcing connectors on is useful in special circumstances: avoid output
configuration changes due to hotplug e.g. with KVM switches, or hardware
with unreliable connector status readout for example.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Add a new output section key "same-as" for configuring clone mode. An
output marked "same-as" another output will be configured identically to
the other output.
The current implementation supports only CRTC sharing for clone mode.
Independent CRTC clone mode cannot be supported until output layout
logic is moved from libweston into the frontend and libweston's damage
tracking issues stemming from overlapping outputs are solved.
Quite a lot of infrastructure is needed to properly configure clone
mode. The implemented logic allows easy addition of independent CRTC
clone mode once libweston supports it. The idea is that wet_layoutput is
the item to be laid out and all weston_outputs a wet_layoutput
contains show exactly the same area of the desktop.
The configuration logic attempts to automatically fall back to creating
more weston_outputs when all heads do not work under the same
weston_output. For now, the fallback path ends with an error message.
Enabling a weston_output is bit complicated, because one needs to first
collect all relevant heads, try to attach them all to the weston_output,
and then back up head by head until enabling the weston_output succeeds.
A new weston_output is created for the left-over heads and the process
is repeated.
CRTC-sharing clone mode is the most efficient clone mode, offering
synchronized scanout timings, but it is not always supported by
hardware.
v10:
- rebased trivial conflicts in man page
- switch to gitlab issue URL
v9:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- remove workaround in simple_head_enable()
v6:
- Add man-page note about cms-colord.
- Don't create an output just to turn it off.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/22
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Now that WESTON_MODULE_MAP supersedes WESTON_BUILD_DIR for libexec
binaries, we don't need to check in WESTON_BUILD_DIR anymore.
There was only one user of weston_config_get_libexec_dir(), so remove
the whole function. There is no reason to export it.
Due to libshared.la being pulled into libweston, this probably was
libweston ABI unintended. Regardless, libweston major has already been
bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Triggered by weston --help, the usage() output should not look like an error.
Note that there is only one caller of usage() at the moment, but let's handle
this here based on the status in case we add other cases.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
