This is all a little confusing, so let's split up the variables and throw
around some comments that better explain what's going on.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Our shared buffer isn't actually in output co-ordinates, so
initializing with the output's width/height isn't correct.
While we're here, remove the misleading comment. In a future
patch I'll try to document this code more accurately.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The region has already been intersected with the output's region before
it was passed to us.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Except the module dir path, they're one and the same. This change
warrants a libweston version bump, if it hasn't been done already.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Replace all uses of weston_transform_region with
weston_matrix_transform_region, then remove the function completely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fixes the following warnings when building with _FORTIFY_SOURCE
and optimizations enabled:
../shared/xalloc.h:49:9: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
49 | write(STDERR_FILENO, oommsg, strlen(oommsg));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
or
../compositor/main.c:427:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
427 | write(STDERR_FILENO, fail_seteuid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
428 | strlen(fail_seteuid));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:434:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
434 | write(STDERR_FILENO, fail_cloexec,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
435 | strlen(fail_cloexec));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:442:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
442 | write(STDERR_FILENO, fail_exec, strlen(fail_exec));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
The supplied path for executing the shell client could contain potential
arguments and not only the binary itself. Specifying the platform either
by using an argument (-platform wayland) or using an environmental
variable (QT_QPA_PLATFORM) with clients written in Qt is for instance
an example on why this might be useful to have in.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When the gl-renderer is not enabled, weston fails to start, as it
doesn't automatically fallback to the pixman renderer, which is
always enabled.
This commit changes the drm-backend to set by default the --use-pixman
option to true when the gl-renderer is disabled (BUILD_DRM_GBM is not
defined).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is pretty counter-intuitive, and should probably happen outside of
the core in the front end while configuring the outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Everywhere we are standardising to drm_fourcc.h pixel format codes, and
using struct pixel_format_info as a general handle that allows us to
access the equivalent format in various APIs. In the name of
standardisation, convert weston_compositor::read_format to
pixel_format_info.
Pixman formats are defined CPU-endian, while DRM formats are defined
always little-endian. OpenGL has various definitions. Correctly mapping
between these when the CPU is big-endian is an extra chore we can
hopefully offload to pixel-formats.c.
GL-renderer read_format is still defined based on Pixman format, because
of the pecualiar way OpenGL defines a pixel format with
GL_UNSIGNED_BYTE. That matches the same Pixman format on big-endian but
not the same drm_fourcc.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was using read_format for the read_pixels() call, and then using a
hardcoded format for interpreting the data received from read_pixels().
That works only by accident, read_format being the same as the hardcoded
format.
Use read_format for the interpreting too. This should guarantee the read
pixels are processed correctly.
Found by code inspection.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The text_input_manager might be destroyed upon a compositor shutdown, so
verify if it's still set-up before attemping to use it to avoid a UAF.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This is so the systemd-notify module, if used, will notify readiness after
we're ready to accept X connections, instead of before.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is awkward and long deprecated, and makes us load xwayland after all
the other modules so we know if we have to load it or not. Let's remove it.
We do still need to prevent loading the module the wrong way, though.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If we leave xwayland in weston's process group, it can receive
signals from the controlling TTY intended for weston.
The easiest way to see this is to launch weston under gdb, start an
X client, and hit ctrl-c in the gdb session. The Xwayland server
will also catch the SIGINT, and the X client will be disconnected.
Instead, let's call setsid() when launching Xwayland, like we do
for launched clients.
Suggested-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
[common equivalent of 77cf8cb006 in Xwayland from Pekka Paalanen; its
commit message follows]
Between fork() and exec() in the child process it is only safe to use
async-signal-safe functions. weston_log() definitely is not one, it
allocates memory and does whatnot.
weston_log() is also inappropriate for other reasons: the child process
has its own stream buffers and flight-recorder. No-one looks into the
child process' flight recorder, so messages would be lost there. The
logging machinery might also attempt to write into debug streams,
meaning both parent and child could be writing simultaneously.
It seems that the best we can do is to pre-bake an error message and
only write() it out if exec() fails. There is no mention that even
strerror_r() might be safe to call, so we don't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Use the custom_env framework we added for Xwayland when forking to
execute clients. This avoids calling the unsafe getenv in between fork
and exec.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It was only a small function, and inlining it will allow us to make it
more safe without having to duplicate a ton of stuff.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This doesn't actually stop us from calling setenv() in between fork()
and exec() when starting clients, but gets us closer to Xwayland's safe
implementation by reusing one of the helpers it added.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Use the arg handling added in the previous commit so that the
environment is completely encapsulated inside the custom env.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rename the bits handling environment variables (currently, all of it),
so we have room to handle args as well.
No functional changes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Between fork() and exec() in the child process it is only safe to use
async-signal-safe functions. Painfully, setenv() is not listed as such.
Therefore we must craft our own custom environment, and we get no help
from libc with that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Constructing argv before-hand is a little easier to look at, but this is
mostly just anticipating more changes to how Weston spawns processes in
general.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We are already using pipe2() in many places, even in libweston, so let's
simplify the code here as well - not to mention avoid a theoretical
race.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Between fork() and exec() in the child process it is only safe to use
async-signal-safe functions. Surprisingly, snprintf() is not such
function. See e.g. https://stackoverflow.com/a/6771799 and how snprintf
is not listed in signal-safety(7) manual.
Therefore we must prepare the fd argument strings before fork(). That is
only possible if we also do not dup() fd in the child process. Hence we
remove the close-on-exec flag instead in the child process which has
copies of the parent's file descriptors. Fortunately fcntl() is safe.
struct fdstr is helping to reduce code clutter a bit.
Additionally, if fork() fails, we now clean up the fds we created.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Between fork() and exec() in the child process it is only safe to use
async-signal-safe functions. weston_log() definitely is not one, it
allocates memory and does whatnot.
weston_log() is also inappropriate for other reasons: the child process
has its own stream buffers and flight-recorder. No-one looks into the
child process' flight recorder, so messages would be lost there. The
logging machinery might also attempt to write into debug streams,
meaning both parent and child could be writing simultaneously.
It seems that the best we can do is to pre-bake an error message and
only write() it out if exec() fails. There is no mention that even
strerror_r() might be safe to call, so we don't.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Doing any kind of memory allocation calls between fork() and exec() in
the child process is prone to deadlocks and explosions. In general, only
async-signal-safe functions are safe there.
Move the config access to the parent process before fork() to avoid
problems.
See also:
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/941#note_1457053
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This reverts commit 4aa885d4af.
Turns out the problem was not about dupping fds at all, but calling
non-async-signal-safe functions like strdup() between fork() and exec()
in the child process.
For more discussion, see:
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/941#note_1457053
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This patch fixes the following:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==528956==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x7fbc5d66bdd7 bp 0x7ffd465573c0 sp 0x7ffd46557398 T0)
==528956==The signal is caused by a WRITE memory access.
==528956==Hint: address points to the zero page.
#0 0x7fbc5d66bdd7 in wl_list_remove ../../git/wayland/src/wayland-util.c:56
#1 0x7fbc5cb8869e in wxw_compositor_destroy ../../git/weston/compositor/xwayland.c:357
#2 0x7fbc5baf3ca6 in weston_signal_emit_mutable ../../git/weston/shared/signal.c:62
#3 0x7fbc5ba4d6f9 in weston_compositor_destroy ../../git/weston/libweston/compositor.c:8639
#4 0x7fbc5cb7a5f2 in wet_main ../../git/weston/compositor/main.c:3772
#5 0x55bd13de2179 in main ../../git/weston/compositor/executable.c:33
#6 0x7fbc5be61d09 in __libc_start_main ../csu/libc-start.c:308
#7 0x55bd13de2099 in _start (/home/pq/local/bin/weston+0x1099)
The problem is triggered by configuring a bad path to Xwayland in
weston.ini, which causes exec() to fail. The fork() succeeded though,
which means the weston_process was already on the watch list, and the
watch can be handled, making sigchl_handler() leave the link
uninitialized.
Making sure the link remains removable fixes this.
Fixes: 18897253d4
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
While developing the new color management, keeping these old plugins
working would require extra work. Let's deprecate these to see if anyone
cares about them, pending removal after the Weston 11.0.0 release.
CI will keep building these in the "Full build" configuration only. Doc
and no-GL builds are no different for these plugins, so there these are
no longer built.
See https://gitlab.freedesktop.org/wayland/weston/-/issues/634
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This way the backends will the actual outputs. And at that point the backend
knows the compositor is shutting down so it can handle this differently if
necessary.
Afterwards wet_compositor_destroy_layout() just deletes the remaining
datastructures.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Replace an oft-duplicated pattern with a trivial helper function. In
doing so, we observe that the one special case (displayfd 'didn't need
to be CLOEXEC') was wrong, because the X server does fork itself
internally, so there is nothing wrong with setting CLOEXEC.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For working around hardware limitations as explained in the man page.
Now added for completeness' sake without knowing if anyone will ever
need this.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
To support heterogeneous outputs, the output must be created by the
same backend as the head(s) it is created for. Solve this by always
creating an output with a first head to attach that determines the
backend to use. Skip already attached first heads in drm_try_attach().
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a struct weston_head parameter to weston_compositor_create_output()
and fold weston_compositor_create_output_with_head() into it.
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/268
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
It's bad form to set the same variable in multiple places, and not all
of them were even equivalent.
Move lcms2 finding to the root level build file only. It is still an
optional dependency like before, and the if-not-found checks are still
in place where actually needed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds an option to program basic display color characteristics from
weston.ini. In the future there will be a way to set this information
from EDID, but because EDID is unreliable that will probably not be the
default. An ICC profile will likely override most or all of this. The
main reason to add this option is to be able to characterise HDR
monitors.
An 'output' section can have a key 'color_characteristics' (string)
set to a name. The name refers to any 'color_characteristics' section
with 'name' set to the same string.
The 'name' key of a 'color_characteristics' section cannot contain a
colon ':'. Names with colon in 'output' section key
'color_characteristics' value are reserved for future use, e.g. to
indicate that the metadata is to be taken from EDID instead of a
weston.ini section.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
