| .. |
|
allwinner-a10.c
|
hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
|
2020-08-28 10:02:45 +01:00 |
|
allwinner-h3.c
|
target-arm queue:
|
2020-08-28 15:14:40 +01:00 |
|
armsse.c
|
hw/arm/armsse: Wire up clocks
|
2021-01-29 15:54:42 +00:00 |
|
armv7m.c
|
hw/arm/armv7m: Correct typo in QOM object name
|
2020-12-10 11:44:56 +00:00 |
|
aspeed_ast2600.c
|
ast2600: SRAM is 89KB
|
2020-12-10 12:11:03 +01:00 |
|
aspeed_soc.c
|
hw/arm/aspeed: Map the UART5 device unconditionally
|
2020-09-18 09:04:36 +02:00 |
|
aspeed.c
|
arm: do not use ram_size global
|
2020-12-10 12:15:07 -05:00 |
|
bcm2835_peripherals.c
|
hw/arm/bcm2835_peripherals: connect the UART clock
|
2020-10-27 11:10:44 +00:00 |
|
bcm2836.c
|
hw/arm/bcm2836: Introduce the BCM2835 SoC
|
2020-10-27 11:10:44 +00:00 |
|
boot.c
|
vl: make qemu_get_machine_opts static
|
2020-12-15 12:51:55 -05:00 |
|
collie.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
|
cubieboard.c
|
arm: remove bios_name
|
2020-12-10 12:15:04 -05:00 |
|
digic_boards.c
|
vl: extract softmmu/datadir.c
|
2020-12-10 12:15:18 -05:00 |
|
digic.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
|
exynos4_boards.c
|
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
|
2020-06-15 22:06:04 +02:00 |
|
exynos4210.c
|
qom: simplify object_find_property / object_class_find_property
|
2020-09-22 16:45:16 -04:00 |
|
fsl-imx6.c
|
Add the ability to change the FEC PHY MDIO device number on i.MX6 processor
|
2020-07-13 14:36:08 +01:00 |
|
fsl-imx6ul.c
|
qom: Put name parameter before value / visitor parameter
|
2020-07-10 15:18:08 +02:00 |
|
fsl-imx7.c
|
Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor
|
2020-07-13 14:36:08 +01:00 |
|
fsl-imx25.c
|
Add the ability to change the FEC PHY MDIO device number on i.MX25 processor
|
2020-07-13 14:36:07 +01:00 |
|
fsl-imx31.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
|
gumstix.c
|
hw/arm/gumstix: Simplify since the machines are little-endian only
|
2020-03-05 16:09:14 +00:00 |
|
highbank.c
|
hw/arm/highbank: Drop dead KVM support code
|
2021-01-08 15:13:38 +00:00 |
|
imx25_pdk.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
|
integratorcp.c
|
qom: simplify object_find_property / object_class_find_property
|
2020-09-22 16:45:16 -04:00 |
|
Kconfig
|
arm-virt: add secure pl061 for reset/power down
|
2021-01-29 10:47:28 +00:00 |
|
kzm.c
|
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
|
2020-06-15 22:06:04 +02:00 |
|
mainstone.c
|
hw/arm: Use memory_region_init_rom() with read-only regions
|
2020-03-17 15:18:46 +01:00 |
|
mcimx6ul-evk.c
|
qom: Put name parameter before value / visitor parameter
|
2020-07-10 15:18:08 +02:00 |
|
mcimx7d-sabre.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
|
meson.build
|
hw/arm: Add two NPCM7xx-based machines
|
2020-09-14 14:24:58 +01:00 |
|
microbit.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
|
mps2-tz.c
|
hw/arm/mps2-tz: Create and connect ARMSSE Clocks
|
2021-01-29 15:54:43 +00:00 |
|
mps2.c
|
hw/arm/mps2: Create and connect SYSCLK Clock
|
2021-01-29 15:54:43 +00:00 |
|
msf2-soc.c
|
msf2-soc, stellaris: Don't wire up SYSRESETREQ
|
2020-08-03 17:55:03 +01:00 |
|
msf2-som.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
|
musca.c
|
hw/arm/musca: Create and connect ARMSSE Clocks
|
2021-01-29 15:54:43 +00:00 |
|
musicpal.c
|
musicpal: Use ptimer_free() in the finalize function to avoid memleaks
|
2021-01-08 15:13:38 +00:00 |
|
netduino2.c
|
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
|
2020-08-03 17:55:03 +01:00 |
|
netduinoplus2.c
|
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
|
2020-08-03 17:55:03 +01:00 |
|
npcm7xx_boards.c
|
hw/*: Use type casting for SysBusDevice in NPCM7XX
|
2021-01-12 21:19:02 +00:00 |
|
npcm7xx.c
|
hw/misc: Add a PWM module for NPCM7XX
|
2021-01-12 21:19:02 +00:00 |
|
nrf51_soc.c
|
hw/arm/nrf51_soc: Set system_clock_scale
|
2020-08-03 17:55:31 +01:00 |
|
nseries.c
|
hw/arm/nseries: Check return value from load_image_targphys()
|
2020-11-10 11:03:48 +00:00 |
|
omap1.c
|
hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()
|
2020-09-01 11:53:44 +02:00 |
|
omap2.c
|
sysbus: Convert to sysbus_realize() etc. with Coccinelle
|
2020-06-15 22:05:28 +02:00 |
|
omap_sx1.c
|
hw/arm: Use memory_region_init_rom() with read-only regions
|
2020-03-17 15:18:46 +01:00 |
|
orangepi.c
|
arm: remove bios_name
|
2020-12-10 12:15:04 -05:00 |
|
palm.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
|
pxa2xx_gpio.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
|
pxa2xx_pic.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
|
pxa2xx.c
|
qdev: Move softmmu properties to qdev-properties-system.h
|
2020-12-18 15:20:17 -05:00 |
|
raspi.c
|
hw/arm/raspi: Add the Raspberry Pi 3 model A+
|
2020-10-27 11:10:44 +00:00 |
|
realview.c
|
qom: simplify object_find_property / object_class_find_property
|
2020-09-22 16:45:16 -04:00 |
|
sabrelite.c
|
hw/arm: sabrelite: Connect the Ethernet PHY at address 6
|
2021-01-08 15:13:39 +00:00 |
|
sbsa-ref.c
|
vl: extract softmmu/datadir.c
|
2020-12-10 12:15:18 -05:00 |
|
smmu-common.c
|
memory: Add IOMMUTLBEvent
|
2020-12-08 13:48:57 -05:00 |
|
smmu-internal.h
|
hw/arm/smmu-common: Manage IOTLB block entries
|
2020-08-24 10:02:06 +01:00 |
|
smmuv3-internal.h
|
hw/arm/smmuv3: Fix up L1STD_SPAN decoding
|
2020-12-10 11:30:44 +00:00 |
|
smmuv3.c
|
memory: Add IOMMUTLBEvent
|
2020-12-08 13:48:57 -05:00 |
|
spitz.c
|
hw/ssi: Rename SSI 'slave' as 'peripheral'
|
2020-12-10 12:15:03 -05:00 |
|
stellaris.c
|
hw/ssi: Rename SSI 'slave' as 'peripheral'
|
2020-12-10 12:15:03 -05:00 |
|
stm32f205_soc.c
|
hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ
|
2020-11-10 11:03:48 +00:00 |
|
stm32f405_soc.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
|
strongarm.c
|
qdev: Move softmmu properties to qdev-properties-system.h
|
2020-12-18 15:20:17 -05:00 |
|
strongarm.h
|
hw/arm/collie: Create the RAM in the board
|
2019-10-22 17:44:01 +01:00 |
|
sysbus-fdt.c
|
hw/arm/virt: vTPM support
|
2020-03-05 12:18:16 -05:00 |
|
tosa.c
|
hw/ssi: Rename SSI 'slave' as 'peripheral'
|
2020-12-10 12:15:03 -05:00 |
|
trace-events
|
arm/trace: Fix hex printing
|
2020-10-27 11:10:44 +00:00 |
|
trace.h
|
trace: switch position of headers to what Meson requires
|
2020-08-21 06:18:24 -04:00 |
|
versatilepb.c
|
qom: simplify object_find_property / object_class_find_property
|
2020-09-22 16:45:16 -04:00 |
|
vexpress.c
|
vexpress-a15: Register "virtualization" as class property
|
2020-12-14 14:25:44 -05:00 |
|
virt-acpi-build.c
|
hw/arm/virt: Remove virt machine state 'smp_cpus'
|
2021-01-08 15:13:38 +00:00 |
|
virt.c
|
arm-virt: add secure pl061 for reset/power down
|
2021-01-29 10:47:28 +00:00 |
|
xilinx_zynq.c
|
qom: simplify object_find_property / object_class_find_property
|
2020-09-22 16:45:16 -04:00 |
|
xlnx-versal-virt.c
|
arm: xlnx-versal: Connect usb to virt-versal
|
2020-12-15 12:04:30 +00:00 |
|
xlnx-versal.c
|
arm: xlnx-versal: Connect usb to virt-versal
|
2020-12-15 12:04:30 +00:00 |
|
xlnx-zcu102.c
|
arm: rename xlnx-zcu102.canbusN properties
|
2021-01-29 10:47:28 +00:00 |
|
xlnx-zynqmp.c
|
xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers
|
2020-12-10 11:30:44 +00:00 |
|
z2.c
|
hw/ssi: Rename SSI 'slave' as 'peripheral'
|
2020-12-10 12:15:03 -05:00 |
fd630cdad7