qemu/include/hw
Jamin Lin db052d0eaf aspeed: fix hardcode boot address 0
In the previous design of ASPEED SOCs QEMU model, it set the boot
address at "0" which was the hardcode setting for ast10x0, ast2600,
ast2500 and ast2400.

According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL and initialize DRAM and copy u-boot image
from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.

Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700 and the boot
address is "0x4 00000000".

Fixed hardcode boot address "0" for future models using
a different mapping address.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27 13:47:05 +01:00
..
acpi hw/acpi/ich9_tco: Include missing 'migration/vmstate.h' header 2024-02-22 12:47:40 +01:00
adc
arm aspeed: fix hardcode boot address 0 2024-02-27 13:47:05 +01:00
audio m68k: Clean up includes 2024-01-30 21:20:20 +03:00
block hw/block/fdc-isa: Implement relocation and enabling/disabling for TYPE_ISA_FDC 2024-02-14 06:09:32 -05:00
char hw/sparc/grlib: split out the headers for each peripherals 2024-02-15 16:58:46 +01:00
core include/hw/core: Add mmu_index to CPUClass 2024-02-03 08:52:25 +10:00
cpu
cris hw/net/etraxfs-eth: use qemu_configure_nic_device() 2024-02-02 16:23:47 +00:00
cxl hw/cxl/cxl_device.h: correct typos 2024-02-21 08:16:43 +03:00
display
dma hw/dma: Pass parent object to i8257_dma_init() 2024-02-15 16:58:46 +01:00
firmware smbios: function to set default processor family 2024-02-09 20:43:14 +10:00
fsi hw/fsi: Aspeed APB2OPB & On-chip peripheral bus 2024-02-01 08:33:18 +01:00
gpio
hyperv include/hw/hyperv/dynmem-proto.h: spelling fix: nunber, atleast 2023-11-15 12:06:05 +03:00
i2c ppc/pnv: Test pnv i2c master and connected devices 2024-02-23 23:24:42 +10:00
i386 Misc HW patch queue 2024-02-22 15:44:29 +00:00
ide hw/ide: Stop exposing internal.h to non-IDE files 2024-02-22 12:47:40 +01:00
input hw/input/pckbd: Open-code i8042_setup_a20_line() wrapper 2024-02-22 12:47:35 +01:00
intc hw/intc/grlib_irqmp: implements multicore irq 2024-02-15 16:58:46 +01:00
ipack
ipmi
isa hw/isa/vt82c686: Bring back via_isa_set_irq() 2023-11-28 14:26:37 +01:00
loongarch hw/loongarch/virt: Set iocsr address space per-board rather than percpu 2024-01-11 19:22:47 +08:00
m68k m68k: Clean up includes 2024-01-30 21:20:20 +03:00
mem include: Clean up includes 2024-01-30 21:20:20 +03:00
mips hw/mips: Inline 'bios.h' definitions 2024-01-05 16:20:15 +01:00
misc misc: Add a pca9554 GPIO device model 2024-02-23 23:24:42 +10:00
net hw/net/npcm_gmac.h: correct typos 2024-02-21 08:16:43 +03:00
nubus
nvram acpi: Clean up includes 2024-01-30 21:20:20 +03:00
openrisc
pci hw/pci: remove pci_nic_init_nofail() 2024-02-02 16:23:48 +00:00
pci-bridge hw/cxl: Add a switch mailbox CCI function 2023-11-07 03:39:11 -05:00
pci-host hw/ppc/ppc4xx_pci: Extract PCI host definitions to hw/pci-host/ppc4xx.h 2024-02-22 12:47:40 +01:00
ppc ppc/pnv: Implement the ChipTOD to Core transfer 2024-02-23 23:24:43 +10:00
rdma
remote
riscv hw/riscv/virt.h: correct typos 2024-02-21 08:16:43 +03:00
rtc
rx hw/rx/rx62n: Only call qdev_get_gpio_in() when necessary 2024-02-15 16:58:46 +01:00
s390x s390x/pci: drive ISM reset from subsystem reset 2024-01-19 11:38:32 +01:00
scsi esp.c: keep track of the DRQ state during DMA 2024-02-13 19:37:28 +00:00
sd
sensor
sh4
southbridge
sparc hw/sparc/grlib: split out the headers for each peripherals 2024-02-15 16:58:46 +01:00
ssi hw/ssi: Implement BCM2835 SPI Controller 2024-02-02 13:51:59 +00:00
timer hw/timer: Move HPET_INTCAP definition to "hpet.h" 2024-02-20 20:34:21 +03:00
tricore hw/tricore/testboard: Use qdev_new() instead of QOM basic API 2024-02-22 12:47:40 +01:00
usb
vfio vfio/iommufd: Introduce a VFIOIOMMU iommufd QOM interface 2024-01-05 21:25:20 +01:00
virtio virtio,pc,pci: features, cleanups, fixes 2024-02-14 15:45:52 +00:00
watchdog
xen hw/xen: use qemu_create_nic_bus_devices() to instantiate Xen NICs 2024-02-02 16:23:47 +00:00
xtensa
boards.h hw/core: Add machine_class_default_cpu_type() 2024-01-05 16:20:14 +01:00
clock.h
elf_ops.h Revert "hw/elf_ops: Ignore loadable segments with zero size" 2024-02-09 17:52:20 +00:00
fw-path-provider.h
hotplug.h
hw.h
irq.h
loader-fit.h
loader.h hw/loader: Clean up global variable shadowing in rom_add_file() 2023-11-07 13:08:48 +01:00
nmi.h
or-irq.h
pcmcia.h
platform-bus.h
ptimer.h
qdev-clock.h
qdev-core.h oslib-posix: initialize backend memory objects in parallel 2024-02-06 08:15:22 +01:00
qdev-dma.h
qdev-properties-system.h qdev: add IOThreadVirtQueueMappingList property type 2023-12-21 22:49:28 +01:00
qdev-properties.h qdev-properties: alias all object class properties 2023-12-21 22:49:28 +01:00
register.h
registerfields.h
resettable.h
stream.h
sysbus.h hw/sysbus: Inline and remove sysbus_add_io() 2024-02-22 12:47:40 +01:00
usb.h usb: inline device creation functions 2024-02-16 13:56:09 +01:00
vmstate-if.h