Currently we store the FPSR cumulative exception bits in the
float_status fields, and use env->vfp.fpsr only for the NZCV bits.
(The QC bit is stored in env->vfp.qc[].)
This works for TCG, but if QEMU was built without CONFIG_TCG (i.e.
with KVM support only) then we use the stub versions of
vfp_get_fpsr_from_host() and vfp_set_fpsr_to_host() which do nothing,
throwing away the cumulative exception bit state. The effect is that
if the FPSR state is round-tripped from KVM to QEMU then we lose the
cumulative exception bits. In particular, this will happen if the VM
is migrated. There is no user-visible bug when using KVM with a QEMU
binary that was built with CONFIG_TCG.
Fix this by always storing the cumulative exception bits in
env->vfp.fpsr. If we are using TCG then we may also keep pending
cumulative exception information in the float_status fields, so we
continue to fold that in on reads.
This change will also be helpful for implementing FEAT_AFP later,
because that includes a feature where in some situations we want to
cause input denormals to be flushed to zero without affecting the
existing state of the FPSR.IDC bit, so we need a place to store IDC
which is distinct from the various float_status fields.
(Note for stable backports: the bug goes back to 4a15527c9f but
this code was refactored in commits ea8618382aba..a8ab8706d4cc461, so
fixing it in branches without those refactorings will mean either
backporting the refactor or else implementing a conceptually similar
fix for the old code.)
Cc: qemu-stable@nongnu.org
Fixes: 4a15527c9f ("target/arm/vfp_helper: Restrict the SoftFloat use to TCG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241011162401.3672735-1-peter.maydell@linaro.org
===========
QEMU README
===========
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Documentation
=============
Documentation can be found hosted online at
`<https://www.qemu.org/documentation/>`_. The documentation for the
current development version that is available at
`<https://www.qemu.org/docs/master/>`_ is generated from the ``docs/``
folder in the source tree, and is built by `Sphinx
<https://www.sphinx-doc.org/en/master/>`_.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
.. code-block:: shell
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
* `<https://wiki.qemu.org/Hosts/Linux>`_
* `<https://wiki.qemu.org/Hosts/Mac>`_
* `<https://wiki.qemu.org/Hosts/W32>`_
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
.. code-block:: shell
git clone https://gitlab.com/qemu-project/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the `style section
<https://www.qemu.org/docs/master/devel/style.html>`_ of
the Developers Guide.
Additional information on submitting patches can be found online via
the QEMU website:
* `<https://wiki.qemu.org/Contribute/SubmitAPatch>`_
* `<https://wiki.qemu.org/Contribute/TrivialPatches>`_
The QEMU website is also maintained under source control.
.. code-block:: shell
git clone https://gitlab.com/qemu-project/qemu-web.git
* `<https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/>`_
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to:
* `<https://github.com/stefanha/git-publish>`_
The workflow with 'git-publish' is:
.. code-block:: shell
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
.. code-block:: shell
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses GitLab issues to track bugs. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
* `<https://gitlab.com/qemu-project/qemu/-/issues>`_
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via GitLab.
For additional information on bug reporting consult:
* `<https://wiki.qemu.org/Contribute/ReportABug>`_
ChangeLog
=========
For version history and release notes, please visit
`<https://wiki.qemu.org/ChangeLog/>`_ or look at the git history for
more detailed information.
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC:
* `<mailto:qemu-devel@nongnu.org>`_
* `<https://lists.nongnu.org/mailman/listinfo/qemu-devel>`_
* #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
* `<https://wiki.qemu.org/Contribute/StartHere>`_
d9c7adb601