d6150ace2b
Since HSS commit c20a89f8dcac, the Icicle Kit reference design has been updated to use a register mapped at 0x4f000000 instead of a GPIO to control whether eMMC or SD card is to be used. With this support the same HSS image can be used for both eMMC and SD card boot flow, while previously two different board configurations were used. This is undocumented but one can take a look at the HSS code HSS_MMCInit() in services/mmc/mmc_api.c. With this commit, HSS image built from 2020.12 release boots again. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210322075248.136255-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
557 lines
23 KiB
C
557 lines
23 KiB
C
/*
|
|
* QEMU RISC-V Board Compatible with Microchip PolarFire SoC Icicle Kit
|
|
*
|
|
* Copyright (c) 2020 Wind River Systems, Inc.
|
|
*
|
|
* Author:
|
|
* Bin Meng <bin.meng@windriver.com>
|
|
*
|
|
* Provides a board compatible with the Microchip PolarFire SoC Icicle Kit
|
|
*
|
|
* 0) CLINT (Core Level Interruptor)
|
|
* 1) PLIC (Platform Level Interrupt Controller)
|
|
* 2) eNVM (Embedded Non-Volatile Memory)
|
|
* 3) MMUARTs (Multi-Mode UART)
|
|
* 4) Cadence eMMC/SDHC controller and an SD card connected to it
|
|
* 5) SiFive Platform DMA (Direct Memory Access Controller)
|
|
* 6) GEM (Gigabit Ethernet MAC Controller)
|
|
* 7) DMC (DDR Memory Controller)
|
|
* 8) IOSCB modules
|
|
*
|
|
* This board currently generates devicetree dynamically that indicates at least
|
|
* two harts and up to five harts.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2 or later, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/units.h"
|
|
#include "qemu/cutils.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/loader.h"
|
|
#include "hw/sysbus.h"
|
|
#include "chardev/char.h"
|
|
#include "hw/cpu/cluster.h"
|
|
#include "target/riscv/cpu.h"
|
|
#include "hw/misc/unimp.h"
|
|
#include "hw/riscv/boot.h"
|
|
#include "hw/riscv/riscv_hart.h"
|
|
#include "hw/riscv/microchip_pfsoc.h"
|
|
#include "hw/intc/sifive_clint.h"
|
|
#include "hw/intc/sifive_plic.h"
|
|
#include "sysemu/sysemu.h"
|
|
|
|
/*
|
|
* The BIOS image used by this machine is called Hart Software Services (HSS).
|
|
* See https://github.com/polarfire-soc/hart-software-services
|
|
*/
|
|
#define BIOS_FILENAME "hss.bin"
|
|
#define RESET_VECTOR 0x20220000
|
|
|
|
/* CLINT timebase frequency */
|
|
#define CLINT_TIMEBASE_FREQ 1000000
|
|
|
|
/* GEM version */
|
|
#define GEM_REVISION 0x0107010c
|
|
|
|
/*
|
|
* The complete description of the whole PolarFire SoC memory map is scattered
|
|
* in different documents. There are several places to look at for memory maps:
|
|
*
|
|
* 1 Chapter 11 "MSS Memory Map", in the doc "UG0880: PolarFire SoC FPGA
|
|
* Microprocessor Subsystem (MSS) User Guide", which can be downloaded from
|
|
* https://www.microsemi.com/document-portal/doc_download/
|
|
* 1244570-ug0880-polarfire-soc-fpga-microprocessor-subsystem-mss-user-guide,
|
|
* describes the whole picture of the PolarFire SoC memory map.
|
|
*
|
|
* 2 A zip file for PolarFire soC memory map, which can be downloaded from
|
|
* https://www.microsemi.com/document-portal/doc_download/
|
|
* 1244581-polarfire-soc-register-map, contains the following 2 major parts:
|
|
* - Register Map/PF_SoC_RegMap_V1_1/pfsoc_regmap.htm
|
|
* describes the complete integrated peripherals memory map
|
|
* - Register Map/PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm
|
|
* describes the complete IOSCB modules memory maps
|
|
*/
|
|
static const MemMapEntry microchip_pfsoc_memmap[] = {
|
|
[MICROCHIP_PFSOC_RSVD0] = { 0x0, 0x100 },
|
|
[MICROCHIP_PFSOC_DEBUG] = { 0x100, 0xf00 },
|
|
[MICROCHIP_PFSOC_E51_DTIM] = { 0x1000000, 0x2000 },
|
|
[MICROCHIP_PFSOC_BUSERR_UNIT0] = { 0x1700000, 0x1000 },
|
|
[MICROCHIP_PFSOC_BUSERR_UNIT1] = { 0x1701000, 0x1000 },
|
|
[MICROCHIP_PFSOC_BUSERR_UNIT2] = { 0x1702000, 0x1000 },
|
|
[MICROCHIP_PFSOC_BUSERR_UNIT3] = { 0x1703000, 0x1000 },
|
|
[MICROCHIP_PFSOC_BUSERR_UNIT4] = { 0x1704000, 0x1000 },
|
|
[MICROCHIP_PFSOC_CLINT] = { 0x2000000, 0x10000 },
|
|
[MICROCHIP_PFSOC_L2CC] = { 0x2010000, 0x1000 },
|
|
[MICROCHIP_PFSOC_DMA] = { 0x3000000, 0x100000 },
|
|
[MICROCHIP_PFSOC_L2LIM] = { 0x8000000, 0x2000000 },
|
|
[MICROCHIP_PFSOC_PLIC] = { 0xc000000, 0x4000000 },
|
|
[MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 },
|
|
[MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 },
|
|
[MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 },
|
|
[MICROCHIP_PFSOC_DDR_SGMII_PHY] = { 0x20007000, 0x1000 },
|
|
[MICROCHIP_PFSOC_EMMC_SD] = { 0x20008000, 0x1000 },
|
|
[MICROCHIP_PFSOC_DDR_CFG] = { 0x20080000, 0x40000 },
|
|
[MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 },
|
|
[MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 },
|
|
[MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 },
|
|
[MICROCHIP_PFSOC_MMUART4] = { 0x20106000, 0x1000 },
|
|
[MICROCHIP_PFSOC_SPI0] = { 0x20108000, 0x1000 },
|
|
[MICROCHIP_PFSOC_SPI1] = { 0x20109000, 0x1000 },
|
|
[MICROCHIP_PFSOC_I2C1] = { 0x2010b000, 0x1000 },
|
|
[MICROCHIP_PFSOC_GEM0] = { 0x20110000, 0x2000 },
|
|
[MICROCHIP_PFSOC_GEM1] = { 0x20112000, 0x2000 },
|
|
[MICROCHIP_PFSOC_GPIO0] = { 0x20120000, 0x1000 },
|
|
[MICROCHIP_PFSOC_GPIO1] = { 0x20121000, 0x1000 },
|
|
[MICROCHIP_PFSOC_GPIO2] = { 0x20122000, 0x1000 },
|
|
[MICROCHIP_PFSOC_ENVM_CFG] = { 0x20200000, 0x1000 },
|
|
[MICROCHIP_PFSOC_ENVM_DATA] = { 0x20220000, 0x20000 },
|
|
[MICROCHIP_PFSOC_QSPI_XIP] = { 0x21000000, 0x1000000 },
|
|
[MICROCHIP_PFSOC_IOSCB] = { 0x30000000, 0x10000000 },
|
|
[MICROCHIP_PFSOC_EMMC_SD_MUX] = { 0x4f000000, 0x4 },
|
|
[MICROCHIP_PFSOC_DRAM_LO] = { 0x80000000, 0x40000000 },
|
|
[MICROCHIP_PFSOC_DRAM_LO_ALIAS] = { 0xc0000000, 0x40000000 },
|
|
[MICROCHIP_PFSOC_DRAM_HI] = { 0x1000000000, 0x0 },
|
|
[MICROCHIP_PFSOC_DRAM_HI_ALIAS] = { 0x1400000000, 0x0 },
|
|
};
|
|
|
|
static void microchip_pfsoc_soc_instance_init(Object *obj)
|
|
{
|
|
MachineState *ms = MACHINE(qdev_get_machine());
|
|
MicrochipPFSoCState *s = MICROCHIP_PFSOC(obj);
|
|
|
|
object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
|
|
qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
|
|
|
|
object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
|
|
TYPE_RISCV_HART_ARRAY);
|
|
qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
|
|
qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
|
|
qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type",
|
|
TYPE_RISCV_CPU_SIFIVE_E51);
|
|
qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", RESET_VECTOR);
|
|
|
|
object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
|
|
qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
|
|
|
|
object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
|
|
TYPE_RISCV_HART_ARRAY);
|
|
qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
|
|
qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
|
|
qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type",
|
|
TYPE_RISCV_CPU_SIFIVE_U54);
|
|
qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR);
|
|
|
|
object_initialize_child(obj, "dma-controller", &s->dma,
|
|
TYPE_SIFIVE_PDMA);
|
|
|
|
object_initialize_child(obj, "sysreg", &s->sysreg,
|
|
TYPE_MCHP_PFSOC_SYSREG);
|
|
|
|
object_initialize_child(obj, "ddr-sgmii-phy", &s->ddr_sgmii_phy,
|
|
TYPE_MCHP_PFSOC_DDR_SGMII_PHY);
|
|
object_initialize_child(obj, "ddr-cfg", &s->ddr_cfg,
|
|
TYPE_MCHP_PFSOC_DDR_CFG);
|
|
|
|
object_initialize_child(obj, "gem0", &s->gem0, TYPE_CADENCE_GEM);
|
|
object_initialize_child(obj, "gem1", &s->gem1, TYPE_CADENCE_GEM);
|
|
|
|
object_initialize_child(obj, "sd-controller", &s->sdhci,
|
|
TYPE_CADENCE_SDHCI);
|
|
|
|
object_initialize_child(obj, "ioscb", &s->ioscb, TYPE_MCHP_PFSOC_IOSCB);
|
|
}
|
|
|
|
static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
MachineState *ms = MACHINE(qdev_get_machine());
|
|
MicrochipPFSoCState *s = MICROCHIP_PFSOC(dev);
|
|
const MemMapEntry *memmap = microchip_pfsoc_memmap;
|
|
MemoryRegion *system_memory = get_system_memory();
|
|
MemoryRegion *rsvd0_mem = g_new(MemoryRegion, 1);
|
|
MemoryRegion *e51_dtim_mem = g_new(MemoryRegion, 1);
|
|
MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
|
|
MemoryRegion *envm_data = g_new(MemoryRegion, 1);
|
|
MemoryRegion *qspi_xip_mem = g_new(MemoryRegion, 1);
|
|
char *plic_hart_config;
|
|
size_t plic_hart_config_len;
|
|
NICInfo *nd;
|
|
int i;
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort);
|
|
/*
|
|
* The cluster must be realized after the RISC-V hart array container,
|
|
* as the container's CPU object is only created on realize, and the
|
|
* CPU must exist and have been parented into the cluster before the
|
|
* cluster is realized.
|
|
*/
|
|
qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
|
|
qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
|
|
|
|
/* Reserved Memory at address 0 */
|
|
memory_region_init_ram(rsvd0_mem, NULL, "microchip.pfsoc.rsvd0_mem",
|
|
memmap[MICROCHIP_PFSOC_RSVD0].size, &error_fatal);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_RSVD0].base,
|
|
rsvd0_mem);
|
|
|
|
/* E51 DTIM */
|
|
memory_region_init_ram(e51_dtim_mem, NULL, "microchip.pfsoc.e51_dtim_mem",
|
|
memmap[MICROCHIP_PFSOC_E51_DTIM].size, &error_fatal);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_E51_DTIM].base,
|
|
e51_dtim_mem);
|
|
|
|
/* Bus Error Units */
|
|
create_unimplemented_device("microchip.pfsoc.buserr_unit0_mem",
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].base,
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].size);
|
|
create_unimplemented_device("microchip.pfsoc.buserr_unit1_mem",
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].base,
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].size);
|
|
create_unimplemented_device("microchip.pfsoc.buserr_unit2_mem",
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].base,
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].size);
|
|
create_unimplemented_device("microchip.pfsoc.buserr_unit3_mem",
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].base,
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].size);
|
|
create_unimplemented_device("microchip.pfsoc.buserr_unit4_mem",
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].base,
|
|
memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].size);
|
|
|
|
/* CLINT */
|
|
sifive_clint_create(memmap[MICROCHIP_PFSOC_CLINT].base,
|
|
memmap[MICROCHIP_PFSOC_CLINT].size, 0, ms->smp.cpus,
|
|
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
|
|
CLINT_TIMEBASE_FREQ, false);
|
|
|
|
/* L2 cache controller */
|
|
create_unimplemented_device("microchip.pfsoc.l2cc",
|
|
memmap[MICROCHIP_PFSOC_L2CC].base, memmap[MICROCHIP_PFSOC_L2CC].size);
|
|
|
|
/*
|
|
* Add L2-LIM at reset size.
|
|
* This should be reduced in size as the L2 Cache Controller WayEnable
|
|
* register is incremented. Unfortunately I don't see a nice (or any) way
|
|
* to handle reducing or blocking out the L2 LIM while still allowing it
|
|
* be re returned to all enabled after a reset. For the time being, just
|
|
* leave it enabled all the time. This won't break anything, but will be
|
|
* too generous to misbehaving guests.
|
|
*/
|
|
memory_region_init_ram(l2lim_mem, NULL, "microchip.pfsoc.l2lim",
|
|
memmap[MICROCHIP_PFSOC_L2LIM].size, &error_fatal);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_L2LIM].base,
|
|
l2lim_mem);
|
|
|
|
/* create PLIC hart topology configuration string */
|
|
plic_hart_config_len = (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1) *
|
|
ms->smp.cpus;
|
|
plic_hart_config = g_malloc0(plic_hart_config_len);
|
|
for (i = 0; i < ms->smp.cpus; i++) {
|
|
if (i != 0) {
|
|
strncat(plic_hart_config, "," MICROCHIP_PFSOC_PLIC_HART_CONFIG,
|
|
plic_hart_config_len);
|
|
} else {
|
|
strncat(plic_hart_config, "M", plic_hart_config_len);
|
|
}
|
|
plic_hart_config_len -= (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1);
|
|
}
|
|
|
|
/* PLIC */
|
|
s->plic = sifive_plic_create(memmap[MICROCHIP_PFSOC_PLIC].base,
|
|
plic_hart_config, 0,
|
|
MICROCHIP_PFSOC_PLIC_NUM_SOURCES,
|
|
MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES,
|
|
MICROCHIP_PFSOC_PLIC_PRIORITY_BASE,
|
|
MICROCHIP_PFSOC_PLIC_PENDING_BASE,
|
|
MICROCHIP_PFSOC_PLIC_ENABLE_BASE,
|
|
MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE,
|
|
MICROCHIP_PFSOC_PLIC_CONTEXT_BASE,
|
|
MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE,
|
|
memmap[MICROCHIP_PFSOC_PLIC].size);
|
|
g_free(plic_hart_config);
|
|
|
|
/* DMA */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0,
|
|
memmap[MICROCHIP_PFSOC_DMA].base);
|
|
for (i = 0; i < SIFIVE_PDMA_IRQS; i++) {
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i,
|
|
qdev_get_gpio_in(DEVICE(s->plic),
|
|
MICROCHIP_PFSOC_DMA_IRQ0 + i));
|
|
}
|
|
|
|
/* SYSREG */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->sysreg), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysreg), 0,
|
|
memmap[MICROCHIP_PFSOC_SYSREG].base);
|
|
|
|
/* MPUCFG */
|
|
create_unimplemented_device("microchip.pfsoc.mpucfg",
|
|
memmap[MICROCHIP_PFSOC_MPUCFG].base,
|
|
memmap[MICROCHIP_PFSOC_MPUCFG].size);
|
|
|
|
/* DDR SGMII PHY */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->ddr_sgmii_phy), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ddr_sgmii_phy), 0,
|
|
memmap[MICROCHIP_PFSOC_DDR_SGMII_PHY].base);
|
|
|
|
/* DDR CFG */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->ddr_cfg), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ddr_cfg), 0,
|
|
memmap[MICROCHIP_PFSOC_DDR_CFG].base);
|
|
|
|
/* SDHCI */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0,
|
|
memmap[MICROCHIP_PFSOC_EMMC_SD].base);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_EMMC_SD_IRQ));
|
|
|
|
/* MMUARTs */
|
|
s->serial0 = mchp_pfsoc_mmuart_create(system_memory,
|
|
memmap[MICROCHIP_PFSOC_MMUART0].base,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART0_IRQ),
|
|
serial_hd(0));
|
|
s->serial1 = mchp_pfsoc_mmuart_create(system_memory,
|
|
memmap[MICROCHIP_PFSOC_MMUART1].base,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART1_IRQ),
|
|
serial_hd(1));
|
|
s->serial2 = mchp_pfsoc_mmuart_create(system_memory,
|
|
memmap[MICROCHIP_PFSOC_MMUART2].base,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART2_IRQ),
|
|
serial_hd(2));
|
|
s->serial3 = mchp_pfsoc_mmuart_create(system_memory,
|
|
memmap[MICROCHIP_PFSOC_MMUART3].base,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART3_IRQ),
|
|
serial_hd(3));
|
|
s->serial4 = mchp_pfsoc_mmuart_create(system_memory,
|
|
memmap[MICROCHIP_PFSOC_MMUART4].base,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_MMUART4_IRQ),
|
|
serial_hd(4));
|
|
|
|
/* SPI */
|
|
create_unimplemented_device("microchip.pfsoc.spi0",
|
|
memmap[MICROCHIP_PFSOC_SPI0].base,
|
|
memmap[MICROCHIP_PFSOC_SPI0].size);
|
|
create_unimplemented_device("microchip.pfsoc.spi1",
|
|
memmap[MICROCHIP_PFSOC_SPI1].base,
|
|
memmap[MICROCHIP_PFSOC_SPI1].size);
|
|
|
|
/* I2C1 */
|
|
create_unimplemented_device("microchip.pfsoc.i2c1",
|
|
memmap[MICROCHIP_PFSOC_I2C1].base,
|
|
memmap[MICROCHIP_PFSOC_I2C1].size);
|
|
|
|
/* GEMs */
|
|
|
|
nd = &nd_table[0];
|
|
if (nd->used) {
|
|
qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
|
|
qdev_set_nic_properties(DEVICE(&s->gem0), nd);
|
|
}
|
|
nd = &nd_table[1];
|
|
if (nd->used) {
|
|
qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
|
|
qdev_set_nic_properties(DEVICE(&s->gem1), nd);
|
|
}
|
|
|
|
object_property_set_int(OBJECT(&s->gem0), "revision", GEM_REVISION, errp);
|
|
object_property_set_int(OBJECT(&s->gem0), "phy-addr", 8, errp);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gem0), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem0), 0,
|
|
memmap[MICROCHIP_PFSOC_GEM0].base);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem0), 0,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_GEM0_IRQ));
|
|
|
|
object_property_set_int(OBJECT(&s->gem1), "revision", GEM_REVISION, errp);
|
|
object_property_set_int(OBJECT(&s->gem1), "phy-addr", 9, errp);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gem1), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem1), 0,
|
|
memmap[MICROCHIP_PFSOC_GEM1].base);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem1), 0,
|
|
qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_GEM1_IRQ));
|
|
|
|
/* GPIOs */
|
|
create_unimplemented_device("microchip.pfsoc.gpio0",
|
|
memmap[MICROCHIP_PFSOC_GPIO0].base,
|
|
memmap[MICROCHIP_PFSOC_GPIO0].size);
|
|
create_unimplemented_device("microchip.pfsoc.gpio1",
|
|
memmap[MICROCHIP_PFSOC_GPIO1].base,
|
|
memmap[MICROCHIP_PFSOC_GPIO1].size);
|
|
create_unimplemented_device("microchip.pfsoc.gpio2",
|
|
memmap[MICROCHIP_PFSOC_GPIO2].base,
|
|
memmap[MICROCHIP_PFSOC_GPIO2].size);
|
|
|
|
/* eNVM */
|
|
memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data",
|
|
memmap[MICROCHIP_PFSOC_ENVM_DATA].size,
|
|
&error_fatal);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_ENVM_DATA].base,
|
|
envm_data);
|
|
|
|
/* IOSCB */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->ioscb), errp);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ioscb), 0,
|
|
memmap[MICROCHIP_PFSOC_IOSCB].base);
|
|
|
|
/* eMMC/SD mux */
|
|
create_unimplemented_device("microchip.pfsoc.emmc_sd_mux",
|
|
memmap[MICROCHIP_PFSOC_EMMC_SD_MUX].base,
|
|
memmap[MICROCHIP_PFSOC_EMMC_SD_MUX].size);
|
|
|
|
/* QSPI Flash */
|
|
memory_region_init_rom(qspi_xip_mem, OBJECT(dev),
|
|
"microchip.pfsoc.qspi_xip",
|
|
memmap[MICROCHIP_PFSOC_QSPI_XIP].size,
|
|
&error_fatal);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_QSPI_XIP].base,
|
|
qspi_xip_mem);
|
|
}
|
|
|
|
static void microchip_pfsoc_soc_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
dc->realize = microchip_pfsoc_soc_realize;
|
|
/* Reason: Uses serial_hds in realize function, thus can't be used twice */
|
|
dc->user_creatable = false;
|
|
}
|
|
|
|
static const TypeInfo microchip_pfsoc_soc_type_info = {
|
|
.name = TYPE_MICROCHIP_PFSOC,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_size = sizeof(MicrochipPFSoCState),
|
|
.instance_init = microchip_pfsoc_soc_instance_init,
|
|
.class_init = microchip_pfsoc_soc_class_init,
|
|
};
|
|
|
|
static void microchip_pfsoc_soc_register_types(void)
|
|
{
|
|
type_register_static(µchip_pfsoc_soc_type_info);
|
|
}
|
|
|
|
type_init(microchip_pfsoc_soc_register_types)
|
|
|
|
static void microchip_icicle_kit_machine_init(MachineState *machine)
|
|
{
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
const MemMapEntry *memmap = microchip_pfsoc_memmap;
|
|
MicrochipIcicleKitState *s = MICROCHIP_ICICLE_KIT_MACHINE(machine);
|
|
MemoryRegion *system_memory = get_system_memory();
|
|
MemoryRegion *mem_low = g_new(MemoryRegion, 1);
|
|
MemoryRegion *mem_low_alias = g_new(MemoryRegion, 1);
|
|
MemoryRegion *mem_high = g_new(MemoryRegion, 1);
|
|
MemoryRegion *mem_high_alias = g_new(MemoryRegion, 1);
|
|
uint64_t mem_high_size;
|
|
DriveInfo *dinfo = drive_get_next(IF_SD);
|
|
|
|
/* Sanity check on RAM size */
|
|
if (machine->ram_size < mc->default_ram_size) {
|
|
char *sz = size_to_str(mc->default_ram_size);
|
|
error_report("Invalid RAM size, should be bigger than %s", sz);
|
|
g_free(sz);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
/* Initialize SoC */
|
|
object_initialize_child(OBJECT(machine), "soc", &s->soc,
|
|
TYPE_MICROCHIP_PFSOC);
|
|
qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
|
|
|
|
/* Register RAM */
|
|
memory_region_init_ram(mem_low, NULL, "microchip.icicle.kit.ram_low",
|
|
memmap[MICROCHIP_PFSOC_DRAM_LO].size,
|
|
&error_fatal);
|
|
memory_region_init_alias(mem_low_alias, NULL,
|
|
"microchip.icicle.kit.ram_low.alias",
|
|
mem_low, 0,
|
|
memmap[MICROCHIP_PFSOC_DRAM_LO_ALIAS].size);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_DRAM_LO].base,
|
|
mem_low);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_DRAM_LO_ALIAS].base,
|
|
mem_low_alias);
|
|
|
|
mem_high_size = machine->ram_size - 1 * GiB;
|
|
|
|
memory_region_init_ram(mem_high, NULL, "microchip.icicle.kit.ram_high",
|
|
mem_high_size, &error_fatal);
|
|
memory_region_init_alias(mem_high_alias, NULL,
|
|
"microchip.icicle.kit.ram_high.alias",
|
|
mem_high, 0, mem_high_size);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_DRAM_HI].base,
|
|
mem_high);
|
|
memory_region_add_subregion(system_memory,
|
|
memmap[MICROCHIP_PFSOC_DRAM_HI_ALIAS].base,
|
|
mem_high_alias);
|
|
|
|
/* Load the firmware */
|
|
riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL);
|
|
|
|
/* Attach an SD card */
|
|
if (dinfo) {
|
|
CadenceSDHCIState *sdhci = &(s->soc.sdhci);
|
|
DeviceState *card = qdev_new(TYPE_SD_CARD);
|
|
|
|
qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo),
|
|
&error_fatal);
|
|
qdev_realize_and_unref(card, sdhci->bus, &error_fatal);
|
|
}
|
|
}
|
|
|
|
static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "Microchip PolarFire SoC Icicle Kit";
|
|
mc->init = microchip_icicle_kit_machine_init;
|
|
mc->max_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT +
|
|
MICROCHIP_PFSOC_COMPUTE_CPU_COUNT;
|
|
mc->min_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT + 1;
|
|
mc->default_cpus = mc->min_cpus;
|
|
|
|
/*
|
|
* Map 513 MiB high memory, the mimimum required high memory size, because
|
|
* HSS will do memory test against the high memory address range regardless
|
|
* of physical memory installed.
|
|
*
|
|
* See memory_tests() in mss_ddr.c in the HSS source code.
|
|
*/
|
|
mc->default_ram_size = 1537 * MiB;
|
|
}
|
|
|
|
static const TypeInfo microchip_icicle_kit_machine_typeinfo = {
|
|
.name = MACHINE_TYPE_NAME("microchip-icicle-kit"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = microchip_icicle_kit_machine_class_init,
|
|
.instance_size = sizeof(MicrochipIcicleKitState),
|
|
};
|
|
|
|
static void microchip_icicle_kit_machine_init_register_types(void)
|
|
{
|
|
type_register_static(µchip_icicle_kit_machine_typeinfo);
|
|
}
|
|
|
|
type_init(microchip_icicle_kit_machine_init_register_types)
|