cb2e28780c
Improve our braindead copy-on-read implementation. Pre-patch, we have multiple issues: - we create a bounce buffer and perform a write for the entire request, even if the active image already has 99% of the clusters occupied, and really only needs to copy-on-read the remaining 1% of the clusters - our bounce buffer was as large as the read request, and can needlessly exhaust our memory by using double the memory of the request size (the original request plus our bounce buffer), rather than a capped maximum overhead beyond the original - if a driver has a max_transfer limit, we are bypassing the normal code in bdrv_aligned_preadv() that fragments to that limit, and instead attempt to read the entire buffer from the driver in one go, which some drivers may assert on - a client can request a large request of nearly 2G such that rounding the request out to cluster boundaries results in a byte count larger than 2G. While this cannot exceed 32 bits, it DOES have some follow-on problems: -- the call to bdrv_driver_pread() can assert for exceeding BDRV_REQUEST_MAX_BYTES, if the driver is old and lacks .bdrv_co_preadv -- if the buffer is all zeroes, the subsequent call to bdrv_co_do_pwrite_zeroes is a no-op due to a negative size, which means we did not actually copy on read Fix all of these issues by breaking up the action into a loop, where each iteration is capped to sane limits. Also, querying the allocation status allows us to optimize: when data is already present in the active layer, we don't need to bounce. Note that the code has a telling comment that copy-on-read should probably be a filter driver rather than a bolt-on hack in io.c; but that remains a task for another day. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |
||
---|---|---|
accel | ||
audio | ||
backends | ||
block | ||
bsd-user | ||
chardev | ||
contrib | ||
crypto | ||
default-configs | ||
disas | ||
docs | ||
dtc@558cd81bdd | ||
fpu | ||
fsdev | ||
gdb-xml | ||
hw | ||
include | ||
io | ||
libdecnumber | ||
linux-headers | ||
linux-user | ||
migration | ||
nbd | ||
net | ||
pc-bios | ||
po | ||
qapi | ||
qga | ||
qobject | ||
qom | ||
replay | ||
roms | ||
scripts | ||
scsi | ||
slirp | ||
stubs | ||
target | ||
tcg | ||
tests | ||
trace | ||
ui | ||
util | ||
.dir-locals.el | ||
.editorconfig | ||
.exrc | ||
.gdbinit | ||
.gitignore | ||
.gitmodules | ||
.mailmap | ||
.shippable.yml | ||
.travis.yml | ||
arch_init.c | ||
balloon.c | ||
block.c | ||
blockdev-nbd.c | ||
blockdev.c | ||
blockjob.c | ||
bootdevice.c | ||
bt-host.c | ||
bt-vhci.c | ||
Changelog | ||
CODING_STYLE | ||
configure | ||
COPYING | ||
COPYING.LIB | ||
COPYING.PYTHON | ||
cpus-common.c | ||
cpus.c | ||
device_tree.c | ||
device-hotplug.c | ||
disas.c | ||
dma-helpers.c | ||
dump.c | ||
exec.c | ||
gdbstub.c | ||
HACKING | ||
hmp-commands-info.hx | ||
hmp-commands.hx | ||
hmp.c | ||
hmp.h | ||
ioport.c | ||
iothread.c | ||
LICENSE | ||
MAINTAINERS | ||
Makefile | ||
Makefile.objs | ||
Makefile.target | ||
memory_ldst.inc.c | ||
memory_mapping.c | ||
memory.c | ||
module-common.c | ||
monitor.c | ||
numa.c | ||
os-posix.c | ||
os-win32.c | ||
qapi-schema.json | ||
qdev-monitor.c | ||
qdict-test-data.txt | ||
qemu-bridge-helper.c | ||
qemu-doc.texi | ||
qemu-ga.texi | ||
qemu-img-cmds.hx | ||
qemu-img.c | ||
qemu-img.texi | ||
qemu-io-cmds.c | ||
qemu-io.c | ||
qemu-nbd.c | ||
qemu-nbd.texi | ||
qemu-option-trace.texi | ||
qemu-options-wrapper.h | ||
qemu-options.h | ||
qemu-options.hx | ||
qemu-seccomp.c | ||
qemu-tech.texi | ||
qemu.nsi | ||
qemu.sasl | ||
qmp.c | ||
qtest.c | ||
README | ||
replication.c | ||
replication.h | ||
rules.mak | ||
thunk.c | ||
tpm.c | ||
trace-events | ||
VERSION | ||
version.rc | ||
vl.c |
QEMU README =========== QEMU is a generic and open source machine & userspace emulator and virtualizer. QEMU is capable of emulating a complete machine in software without any need for hardware virtualization support. By using dynamic translation, it achieves very good performance. QEMU can also integrate with the Xen and KVM hypervisors to provide emulated hardware while allowing the hypervisor to manage the CPU. With hypervisor support, QEMU can achieve near native performance for CPUs. When QEMU emulates CPUs directly it is capable of running operating systems made for one machine (e.g. an ARMv7 board) on a different machine (e.g. an x86_64 PC board). QEMU is also capable of providing userspace API virtualization for Linux and BSD kernel interfaces. This allows binaries compiled against one architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a different architecture ABI (e.g. the Linux x86_64 ABI). This does not involve any hardware emulation, simply CPU and syscall emulation. QEMU aims to fit into a variety of use cases. It can be invoked directly by users wishing to have full control over its behaviour and settings. It also aims to facilitate integration into higher level management layers, by providing a stable command line interface and monitor API. It is commonly invoked indirectly via the libvirt library when using open source applications such as oVirt, OpenStack and virt-manager. QEMU as a whole is released under the GNU General Public License, version 2. For full licensing details, consult the LICENSE file. Building ======== QEMU is multi-platform software intended to be buildable on all modern Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety of other UNIX targets. The simple steps to build QEMU are: mkdir build cd build ../configure make Additional information can also be found online via the QEMU website: http://qemu-project.org/Hosts/Linux http://qemu-project.org/Hosts/Mac http://qemu-project.org/Hosts/W32 Submitting patches ================== The QEMU source code is maintained under the GIT version control system. git clone git://git.qemu-project.org/qemu.git When submitting patches, the preferred approach is to use 'git format-patch' and/or 'git send-email' to format & send the mail to the qemu-devel@nongnu.org mailing list. All patches submitted must contain a 'Signed-off-by' line from the author. Patches should follow the guidelines set out in the HACKING and CODING_STYLE files. Additional information on submitting patches can be found online via the QEMU website http://qemu-project.org/Contribute/SubmitAPatch http://qemu-project.org/Contribute/TrivialPatches Bug reporting ============= The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs found when running code built from QEMU git or upstream released sources should be reported via: https://bugs.launchpad.net/qemu/ If using QEMU via an operating system vendor pre-built binary package, it is preferable to report bugs to the vendor's own bug tracker first. If the bug is also known to affect latest upstream code, it can also be reported via launchpad. For additional information on bug reporting consult: http://qemu-project.org/Contribute/ReportABug Contact ======= The QEMU community can be contacted in a number of ways, with the two main methods being email and IRC - qemu-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/qemu-devel - #qemu on irc.oftc.net Information on additional methods of contacting the community can be found online via the QEMU website: http://qemu-project.org/Contribute/StartHere -- End