mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
93dbd10347
qemu/include/hw
History
Peter Maydell 93dbd10347 hw/arm/iotkit: Rename IoTKit to ARMSSE 
The Arm IoTKit was effectively the forerunner of a series of
subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200:
https://developer.arm.com/products/system-design/subsystems
These are generally quite similar, though later iterations have
extra devices that earlier ones do not.

We want to add a model of the SSE-200, which means refactoring the
IoTKit code into an abstract base class and subclasses (using the
same design that the bcm283x SoC and Aspeed SoC family
implementations do). As a first step, rename the IoTKit struct and
QOM macros to ARMSSE, which is what we're going to name the base
class. We temporarily retain TYPE_IOTKIT to avoid changing the
code that instantiates a TYPE_IOTKIT device here and then changing
it back again when it is re-introduced as a subclass.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-5-peter.maydell@linaro.org
2019-02-01 14:55:41 +00:00
..
acpi typo: apci->acpi 2019-01-30 10:16:58 +01:00
adc STM32F2xx: Add the ADC device 2016-10-04 13:28:07 +01:00
arm hw/arm/iotkit: Rename IoTKit to ARMSSE 2019-02-01 14:55:41 +00:00
audio audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string 2018-10-29 13:50:15 +01:00
block block: Remove deprecated -drive option serial 2018-08-15 12:50:39 +02:00
char hw/char/serial: Remove SerialState from "qemu/typedefs.h" 2019-01-22 05:14:33 +01:00
core hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
cpu qom/cpu: Add cluster_index to CPUState 2019-01-29 11:46:05 +00:00
cris char: rename CharDriverState Chardev 2017-01-27 18:07:59 +01:00
display edid: fix vendor default 2018-10-05 11:26:56 +02:00
dma hw/dma/pl080: Don't use CPU address space for DMA accesses 2018-08-20 11:24:33 +01:00
firmware hw/smbios: Move to the hw/firmware/ subdirectory 2018-12-19 16:48:16 -05:00
gpio hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral 2019-01-07 15:23:47 +00:00
hyperv hyperv: process POST_MESSAGE hypercall 2018-10-19 13:44:14 +02:00
i2c arm: Stub out NRF51 TWI magnetometer/accelerometer detection 2019-01-29 11:46:03 +00:00
i386 hw/i386: Remove PCMachineClass from "qemu/typedefs.h" 2019-01-22 05:14:33 +01:00
ide ide: Get rid of CMD646BAR struct 2019-01-25 14:52:11 -05:00
input hw/input/ps2: Remove PS2State from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
intc qom: make interface types abstract 2018-12-11 15:45:22 -02:00
ipack ipack: Update e-mail address 2016-05-18 15:04:27 +03:00
ipmi qom: make interface types abstract 2018-12-11 15:45:22 -02:00
isa qom: make interface types abstract 2018-12-11 15:45:22 -02:00
kvm
lm32 intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface 2016-10-04 10:00:25 +02:00
m68k hw/char/mcf_uart: QOMify the ColdFire UART 2017-02-16 14:06:56 +01:00
mem qom: make interface types abstract 2018-12-11 15:45:22 -02:00
mips hw/mips: Use the IEC binary prefix definitions 2018-07-02 15:41:16 +02:00
misc target/mips: Update ITU to utilize SAARI and SAAR CP0 registers 2019-01-18 16:53:28 +01:00
net net: cadence_gem: Add support for selecting the DMA MemoryRegion 2018-10-16 17:13:49 +01:00
nvram fw_cfg: import & use linux/qemu_fw_cfg.h 2018-08-23 18:46:25 +02:00
pci pci/pcie: stop plug/unplug if the slot is locked 2019-01-14 19:31:04 -05:00
pci-bridge Clean up includes 2018-02-09 05:05:11 +01:00
pci-host Don't talk about the LGPL if the file is licensed under the GPL 2019-01-30 10:51:20 +01:00
ppc ppc: Fix duplicated typedefs to be able to compile with Clang in gnu99 mode 2019-01-22 05:14:33 +01:00
riscv sifive_uart: Implement interrupt pending register 2018-12-20 12:08:43 -08:00
s390x hw/s390x: Fix bad mask in time2tod() 2018-12-20 17:07:24 +01:00
scsi scsi: esp: Defer command completion until previous interrupts have been handled 2019-01-11 13:57:24 +01:00
sd sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) 2018-06-08 13:15:34 +01:00
sh4 avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
sparc sun4u_iommu: update to reflect IOMMU is no longer part of the APB device 2018-01-09 21:48:20 +00:00
ssi aspeed/smc: snoop SPI transfers to fake dummy cycles 2019-01-29 11:46:05 +00:00
timer hw/timer/nrf51_timer: Add nRF51 Timer peripheral 2019-01-07 15:23:47 +00:00
tricore Clean up header guards that don't match their file name 2016-07-12 16:19:16 +02:00
unicore32 hw/unicore32: restrict hw addr defines to source file 2017-12-18 17:07:02 +03:00
usb usb: Add basic code to emulate Chipidea USB IP 2018-02-09 10:40:30 +00:00
vfio qemu/queue.h: typedef QTAILQ heads 2019-01-11 15:46:55 +01:00
virtio virtio-net: Fix a typo 2019-01-24 13:34:20 +01:00
watchdog hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module 2018-08-20 11:24:33 +01:00
xen xen: Replace few mentions of xend by libxl 2019-01-14 13:45:40 +00:00
xtensa Clean up includes 2018-02-09 05:05:11 +01:00
boards.h compat: replace PC_COMPAT_2_1 & HW_COMPAT_2_1 macros 2019-01-07 16:18:42 +04:00
bt.h char: rename CharDriverState Chardev 2017-01-27 18:07:59 +01:00
devices.h ui/console: Remove MouseTransformInfo from qemu/typedefs.h 2019-01-22 05:14:33 +01:00
elf_ops.h avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
empty_slot.h Clean up decorations and whitespace around header guards 2016-07-12 16:20:46 +02:00
fw-path-provider.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hotplug.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hw.h migration: Split qemu-file.h 2017-06-01 18:49:22 +02:00
ide.h ide/via: Rename functions to match device name 2019-01-25 14:52:12 -05:00
irq.h hw/core/split-irq: Device that splits IRQ lines 2018-03-02 11:03:45 +00:00
loader-fit.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
loader.h Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel. 2019-01-07 15:46:20 +00:00
nmi.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
or-irq.h hw/core/or-irq: Support more than 16 inputs to an OR gate 2018-06-15 15:23:34 +01:00
pcmcia.h hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
platform-bus.h platform-bus-device: use device plug callback instead of machine_done notifier 2018-05-10 18:10:56 +01:00
ptimer.h ptimer: Add TRIGGER_ONLY_ON_DECREMENT policy option 2018-07-09 14:51:34 +01:00
qdev-core.h globals: Allow global properties to be optional 2019-01-17 21:10:57 -05:00
qdev-dma.h qdev: Remove hex8/32/64 property types 2014-02-14 21:12:04 +01:00
qdev-properties.h qapi: Define PCIe link speed and width properties 2018-12-19 16:48:16 -05:00
qdev.h
register.h hw: register: Run post_write hook on reset 2018-03-01 11:05:43 +00:00
registerfields.h Use #include "..." for our own headers, <...> for others 2018-02-09 05:05:11 +01:00
stream.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
sysbus.h core/sysbus: remove the SysBusDeviceClass::init path 2018-12-13 13:48:03 +00:00
usb.h qemu/queue.h: simplify reverse access to QTAILQ 2019-01-11 15:46:55 +01:00