qemu/hw/watchdog/wdt_aspeed.c
Andrew Jeffery 74b67e1f9d watchdog: aspeed: Fix sequential control writes
The logic in the handling for the control register required toggling the
enable state for writes to stick. Rework the condition chain to allow
sequential writes that do not update the enable state.

Fixes: 854123bf8d ("wdt: Add Aspeed watchdog device model")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210709053107.1829304-3-andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20 08:50:59 +02:00

392 lines
12 KiB
C

/*
* ASPEED Watchdog Controller
*
* Copyright (C) 2016-2017 IBM Corp.
*
* This code is licensed under the GPL version 2 or later. See the
* COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qemu/timer.h"
#include "sysemu/watchdog.h"
#include "hw/misc/aspeed_scu.h"
#include "hw/qdev-properties.h"
#include "hw/sysbus.h"
#include "hw/watchdog/wdt_aspeed.h"
#include "migration/vmstate.h"
#define WDT_STATUS (0x00 / 4)
#define WDT_RELOAD_VALUE (0x04 / 4)
#define WDT_RESTART (0x08 / 4)
#define WDT_CTRL (0x0C / 4)
#define WDT_CTRL_RESET_MODE_SOC (0x00 << 5)
#define WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5)
#define WDT_CTRL_1MHZ_CLK BIT(4)
#define WDT_CTRL_WDT_EXT BIT(3)
#define WDT_CTRL_WDT_INTR BIT(2)
#define WDT_CTRL_RESET_SYSTEM BIT(1)
#define WDT_CTRL_ENABLE BIT(0)
#define WDT_RESET_WIDTH (0x18 / 4)
#define WDT_RESET_WIDTH_ACTIVE_HIGH BIT(31)
#define WDT_POLARITY_MASK (0xFF << 24)
#define WDT_ACTIVE_HIGH_MAGIC (0xA5 << 24)
#define WDT_ACTIVE_LOW_MAGIC (0x5A << 24)
#define WDT_RESET_WIDTH_PUSH_PULL BIT(30)
#define WDT_DRIVE_TYPE_MASK (0xFF << 24)
#define WDT_PUSH_PULL_MAGIC (0xA8 << 24)
#define WDT_OPEN_DRAIN_MAGIC (0x8A << 24)
#define WDT_RESET_MASK1 (0x1c / 4)
#define WDT_TIMEOUT_STATUS (0x10 / 4)
#define WDT_TIMEOUT_CLEAR (0x14 / 4)
#define WDT_RESTART_MAGIC 0x4755
#define AST2600_SCU_RESET_CONTROL1 (0x40 / 4)
#define SCU_RESET_CONTROL1 (0x04 / 4)
#define SCU_RESET_SDRAM BIT(0)
static bool aspeed_wdt_is_enabled(const AspeedWDTState *s)
{
return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE;
}
static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size)
{
AspeedWDTState *s = ASPEED_WDT(opaque);
offset >>= 2;
switch (offset) {
case WDT_STATUS:
return s->regs[WDT_STATUS];
case WDT_RELOAD_VALUE:
return s->regs[WDT_RELOAD_VALUE];
case WDT_RESTART:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: read from write-only reg at offset 0x%"
HWADDR_PRIx "\n", __func__, offset);
return 0;
case WDT_CTRL:
return s->regs[WDT_CTRL];
case WDT_RESET_WIDTH:
return s->regs[WDT_RESET_WIDTH];
case WDT_RESET_MASK1:
return s->regs[WDT_RESET_MASK1];
case WDT_TIMEOUT_STATUS:
case WDT_TIMEOUT_CLEAR:
qemu_log_mask(LOG_UNIMP,
"%s: uninmplemented read at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
return 0;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
return 0;
}
}
static void aspeed_wdt_reload(AspeedWDTState *s)
{
uint64_t reload;
if (!(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK)) {
reload = muldiv64(s->regs[WDT_RELOAD_VALUE], NANOSECONDS_PER_SECOND,
s->pclk_freq);
} else {
reload = s->regs[WDT_RELOAD_VALUE] * 1000ULL;
}
if (aspeed_wdt_is_enabled(s)) {
timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + reload);
}
}
static void aspeed_wdt_reload_1mhz(AspeedWDTState *s)
{
uint64_t reload = s->regs[WDT_RELOAD_VALUE] * 1000ULL;
if (aspeed_wdt_is_enabled(s)) {
timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + reload);
}
}
static uint64_t aspeed_2400_sanitize_ctrl(uint64_t data)
{
return data & 0xffff;
}
static uint64_t aspeed_2500_sanitize_ctrl(uint64_t data)
{
return (data & ~(0xfUL << 8)) | WDT_CTRL_1MHZ_CLK;
}
static uint64_t aspeed_2600_sanitize_ctrl(uint64_t data)
{
return data & ~(0x7UL << 7);
}
static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size)
{
AspeedWDTState *s = ASPEED_WDT(opaque);
AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(s);
bool enable;
offset >>= 2;
switch (offset) {
case WDT_STATUS:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: write to read-only reg at offset 0x%"
HWADDR_PRIx "\n", __func__, offset);
break;
case WDT_RELOAD_VALUE:
s->regs[WDT_RELOAD_VALUE] = data;
break;
case WDT_RESTART:
if ((data & 0xFFFF) == WDT_RESTART_MAGIC) {
s->regs[WDT_STATUS] = s->regs[WDT_RELOAD_VALUE];
awc->wdt_reload(s);
}
break;
case WDT_CTRL:
data = awc->sanitize_ctrl(data);
enable = data & WDT_CTRL_ENABLE;
if (enable && !aspeed_wdt_is_enabled(s)) {
s->regs[WDT_CTRL] = data;
awc->wdt_reload(s);
} else if (!enable && aspeed_wdt_is_enabled(s)) {
s->regs[WDT_CTRL] = data;
timer_del(s->timer);
} else {
s->regs[WDT_CTRL] = data;
}
break;
case WDT_RESET_WIDTH:
if (awc->reset_pulse) {
awc->reset_pulse(s, data & WDT_POLARITY_MASK);
}
s->regs[WDT_RESET_WIDTH] &= ~awc->ext_pulse_width_mask;
s->regs[WDT_RESET_WIDTH] |= data & awc->ext_pulse_width_mask;
break;
case WDT_RESET_MASK1:
/* TODO: implement */
s->regs[WDT_RESET_MASK1] = data;
break;
case WDT_TIMEOUT_STATUS:
case WDT_TIMEOUT_CLEAR:
qemu_log_mask(LOG_UNIMP,
"%s: uninmplemented write at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
}
return;
}
static WatchdogTimerModel model = {
.wdt_name = TYPE_ASPEED_WDT,
.wdt_description = "Aspeed watchdog device",
};
static const VMStateDescription vmstate_aspeed_wdt = {
.name = "vmstate_aspeed_wdt",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_TIMER_PTR(timer, AspeedWDTState),
VMSTATE_UINT32_ARRAY(regs, AspeedWDTState, ASPEED_WDT_REGS_MAX),
VMSTATE_END_OF_LIST()
}
};
static const MemoryRegionOps aspeed_wdt_ops = {
.read = aspeed_wdt_read,
.write = aspeed_wdt_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
.valid.unaligned = false,
};
static void aspeed_wdt_reset(DeviceState *dev)
{
AspeedWDTState *s = ASPEED_WDT(dev);
AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(s);
s->regs[WDT_STATUS] = 0x3EF1480;
s->regs[WDT_RELOAD_VALUE] = 0x03EF1480;
s->regs[WDT_RESTART] = 0;
s->regs[WDT_CTRL] = awc->sanitize_ctrl(0);
s->regs[WDT_RESET_WIDTH] = 0xFF;
timer_del(s->timer);
}
static void aspeed_wdt_timer_expired(void *dev)
{
AspeedWDTState *s = ASPEED_WDT(dev);
uint32_t reset_ctrl_reg = ASPEED_WDT_GET_CLASS(s)->reset_ctrl_reg;
/* Do not reset on SDRAM controller reset */
if (s->scu->regs[reset_ctrl_reg] & SCU_RESET_SDRAM) {
timer_del(s->timer);
s->regs[WDT_CTRL] = 0;
return;
}
qemu_log_mask(CPU_LOG_RESET, "Watchdog timer %" HWADDR_PRIx " expired.\n",
s->iomem.addr);
watchdog_perform_action();
timer_del(s->timer);
}
#define PCLK_HZ 24000000
static void aspeed_wdt_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedWDTState *s = ASPEED_WDT(dev);
assert(s->scu);
s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, aspeed_wdt_timer_expired, dev);
/* FIXME: This setting should be derived from the SCU hw strapping
* register SCU70
*/
s->pclk_freq = PCLK_HZ;
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_wdt_ops, s,
TYPE_ASPEED_WDT, ASPEED_WDT_REGS_MAX * 4);
sysbus_init_mmio(sbd, &s->iomem);
}
static Property aspeed_wdt_properties[] = {
DEFINE_PROP_LINK("scu", AspeedWDTState, scu, TYPE_ASPEED_SCU,
AspeedSCUState *),
DEFINE_PROP_END_OF_LIST(),
};
static void aspeed_wdt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "ASPEED Watchdog Controller";
dc->realize = aspeed_wdt_realize;
dc->reset = aspeed_wdt_reset;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
dc->vmsd = &vmstate_aspeed_wdt;
device_class_set_props(dc, aspeed_wdt_properties);
}
static const TypeInfo aspeed_wdt_info = {
.parent = TYPE_SYS_BUS_DEVICE,
.name = TYPE_ASPEED_WDT,
.instance_size = sizeof(AspeedWDTState),
.class_init = aspeed_wdt_class_init,
.class_size = sizeof(AspeedWDTClass),
.abstract = true,
};
static void aspeed_2400_wdt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass);
dc->desc = "ASPEED 2400 Watchdog Controller";
awc->offset = 0x20;
awc->ext_pulse_width_mask = 0xff;
awc->reset_ctrl_reg = SCU_RESET_CONTROL1;
awc->wdt_reload = aspeed_wdt_reload;
awc->sanitize_ctrl = aspeed_2400_sanitize_ctrl;
}
static const TypeInfo aspeed_2400_wdt_info = {
.name = TYPE_ASPEED_2400_WDT,
.parent = TYPE_ASPEED_WDT,
.instance_size = sizeof(AspeedWDTState),
.class_init = aspeed_2400_wdt_class_init,
};
static void aspeed_2500_wdt_reset_pulse(AspeedWDTState *s, uint32_t property)
{
if (property) {
if (property == WDT_ACTIVE_HIGH_MAGIC) {
s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_ACTIVE_HIGH;
} else if (property == WDT_ACTIVE_LOW_MAGIC) {
s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_ACTIVE_HIGH;
} else if (property == WDT_PUSH_PULL_MAGIC) {
s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_PUSH_PULL;
} else if (property == WDT_OPEN_DRAIN_MAGIC) {
s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_PUSH_PULL;
}
}
}
static void aspeed_2500_wdt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass);
dc->desc = "ASPEED 2500 Watchdog Controller";
awc->offset = 0x20;
awc->ext_pulse_width_mask = 0xfffff;
awc->reset_ctrl_reg = SCU_RESET_CONTROL1;
awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
awc->wdt_reload = aspeed_wdt_reload_1mhz;
awc->sanitize_ctrl = aspeed_2500_sanitize_ctrl;
}
static const TypeInfo aspeed_2500_wdt_info = {
.name = TYPE_ASPEED_2500_WDT,
.parent = TYPE_ASPEED_WDT,
.instance_size = sizeof(AspeedWDTState),
.class_init = aspeed_2500_wdt_class_init,
};
static void aspeed_2600_wdt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass);
dc->desc = "ASPEED 2600 Watchdog Controller";
awc->offset = 0x40;
awc->ext_pulse_width_mask = 0xfffff; /* TODO */
awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1;
awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
awc->wdt_reload = aspeed_wdt_reload_1mhz;
awc->sanitize_ctrl = aspeed_2600_sanitize_ctrl;
}
static const TypeInfo aspeed_2600_wdt_info = {
.name = TYPE_ASPEED_2600_WDT,
.parent = TYPE_ASPEED_WDT,
.instance_size = sizeof(AspeedWDTState),
.class_init = aspeed_2600_wdt_class_init,
};
static void wdt_aspeed_register_types(void)
{
watchdog_add_model(&model);
type_register_static(&aspeed_wdt_info);
type_register_static(&aspeed_2400_wdt_info);
type_register_static(&aspeed_2500_wdt_info);
type_register_static(&aspeed_2600_wdt_info);
}
type_init(wdt_aspeed_register_types)