qemu/hw/lm32/milkymist-hw.h
OGAWA Hirofumi fb71956367 ui/opengl: Reduce build required libraries for opengl
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.

Tested with epoxy-1.3.1.

- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy

(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

[ lm32 tested by kraxel ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03 10:13:42 +01:00

209 lines
5.6 KiB
C

#ifndef QEMU_HW_MILKYMIST_H
#define QEMU_HW_MILKYMIST_H
#include "hw/qdev.h"
#include "net/net.h"
static inline DeviceState *milkymist_uart_create(hwaddr base,
qemu_irq irq)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-uart");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
return dev;
}
static inline DeviceState *milkymist_hpdmc_create(hwaddr base)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-hpdmc");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
return dev;
}
static inline DeviceState *milkymist_memcard_create(hwaddr base)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-memcard");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
return dev;
}
static inline DeviceState *milkymist_vgafb_create(hwaddr base,
uint32_t fb_offset, uint32_t fb_mask)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-vgafb");
qdev_prop_set_uint32(dev, "fb_offset", fb_offset);
qdev_prop_set_uint32(dev, "fb_mask", fb_mask);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
return dev;
}
static inline DeviceState *milkymist_sysctl_create(hwaddr base,
qemu_irq gpio_irq, qemu_irq timer0_irq, qemu_irq timer1_irq,
uint32_t freq_hz, uint32_t system_id, uint32_t capabilities,
uint32_t gpio_strappings)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-sysctl");
qdev_prop_set_uint32(dev, "frequency", freq_hz);
qdev_prop_set_uint32(dev, "systemid", system_id);
qdev_prop_set_uint32(dev, "capabilities", capabilities);
qdev_prop_set_uint32(dev, "gpio_strappings", gpio_strappings);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, gpio_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, timer0_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, timer1_irq);
return dev;
}
static inline DeviceState *milkymist_pfpu_create(hwaddr base,
qemu_irq irq)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-pfpu");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
return dev;
}
#ifdef CONFIG_OPENGL
#include <X11/Xlib.h>
#include <epoxy/gl.h>
#include <epoxy/glx.h>
static const int glx_fbconfig_attr[] = {
GLX_GREEN_SIZE, 5,
GLX_GREEN_SIZE, 6,
GLX_BLUE_SIZE, 5,
None
};
#endif
static inline DeviceState *milkymist_tmu2_create(hwaddr base,
qemu_irq irq)
{
#ifdef CONFIG_OPENGL
DeviceState *dev;
Display *d;
GLXFBConfig *configs;
int nelements;
int ver_major, ver_minor;
if (display_type == DT_NOGRAPHIC) {
return NULL;
}
/* check that GLX will work */
d = XOpenDisplay(NULL);
if (d == NULL) {
return NULL;
}
if (!glXQueryVersion(d, &ver_major, &ver_minor)) {
/* Yeah, sometimes getting the GLX version can fail.
* Isn't X beautiful? */
XCloseDisplay(d);
return NULL;
}
if ((ver_major < 1) || ((ver_major == 1) && (ver_minor < 3))) {
printf("Your GLX version is %d.%d,"
"but TMU emulation needs at least 1.3. TMU disabled.\n",
ver_major, ver_minor);
XCloseDisplay(d);
return NULL;
}
configs = glXChooseFBConfig(d, 0, glx_fbconfig_attr, &nelements);
if (configs == NULL) {
XCloseDisplay(d);
return NULL;
}
XFree(configs);
XCloseDisplay(d);
dev = qdev_create(NULL, "milkymist-tmu2");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
return dev;
#else
return NULL;
#endif
}
static inline DeviceState *milkymist_ac97_create(hwaddr base,
qemu_irq crrequest_irq, qemu_irq crreply_irq, qemu_irq dmar_irq,
qemu_irq dmaw_irq)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-ac97");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, crrequest_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, crreply_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, dmar_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 3, dmaw_irq);
return dev;
}
static inline DeviceState *milkymist_minimac2_create(hwaddr base,
hwaddr buffers_base, qemu_irq rx_irq, qemu_irq tx_irq)
{
DeviceState *dev;
qemu_check_nic_model(&nd_table[0], "minimac2");
dev = qdev_create(NULL, "milkymist-minimac2");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, buffers_base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, rx_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, tx_irq);
return dev;
}
static inline DeviceState *milkymist_softusb_create(hwaddr base,
qemu_irq irq, uint32_t pmem_base, uint32_t pmem_size,
uint32_t dmem_base, uint32_t dmem_size)
{
DeviceState *dev;
dev = qdev_create(NULL, "milkymist-softusb");
qdev_prop_set_uint32(dev, "pmem_size", pmem_size);
qdev_prop_set_uint32(dev, "dmem_size", dmem_size);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, pmem_base);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, dmem_base);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
return dev;
}
#endif /* QEMU_HW_MILKYMIST_H */