Since 'setup_rt_frame' has never been implemented, this struct
is unused.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hmp_info_roms() was removed in commit dd98234c05 ("qapi:
introduce x-query-roms QMP command"),
hmp_info_numa() in commit 1b8ae799d8 ("qapi: introduce
x-query-numa QMP command"),
hmp_info_ramblock() in commit ca411b7c8a ("qapi: introduce
x-query-ramblock QMP command")
and hmp_info_irq() in commit 91f2fa7045 ("qapi: introduce
x-query-irq QMP command").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
host_cpu_realizefn() sets CPUID_EXT_MONITOR without consulting host/KVM
capabilities. This may cause problems:
- If MWAIT/MONITOR is not available on the host, advertising this
feature to the guest and executing MWAIT/MONITOR from the guest
triggers #UD and the guest doesn't boot. This is because typically
#UD takes priority over VM-Exit interception checks and KVM doesn't
emulate MONITOR/MWAIT on #UD.
- If KVM doesn't support KVM_X86_DISABLE_EXITS_MWAIT, MWAIT/MONITOR
from the guest are intercepted by KVM, which is not what cpu-pm=on
intends to do.
In these cases, MWAIT/MONITOR should not be exposed to the guest.
The logic in kvm_arch_get_supported_cpuid() to handle CPUID_EXT_MONITOR
is correct and sufficient, and we can't set CPUID_EXT_MONITOR after
x86_cpu_filter_features().
This was not an issue before commit 662175b91f ("i386: reorder call to
cpu_exec_realizefn") because the feature added in the accel-specific
realizefn could be checked against host availability and filtered out.
Additionally, it seems not a good idea to handle guest CPUID leaves in
host_cpu_realizefn(), and this patch merges host_cpu_enable_cpu_pm()
into kvm_cpu_realizefn().
Fixes: f5cc5a5c16 ("i386: split cpu accelerators from cpu.c, using AccelCPUClass")
Fixes: 662175b91f ("i386: reorder call to cpu_exec_realizefn")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both cpu-pm and mem-lock are related to system resource overcommit, but
they are separate from each other, in terms of how they are realized,
and of course, they are applied to different system resources.
It's tempting to use separate command lines to specify their behavior.
e.g., in the following example, the cpu-pm command is quietly
overwritten, and it's not easy to notice it without careful inspection.
--overcommit mem-lock=on
--overcommit cpu-pm=on
Fixes: c8c9dc42b7 ("Remove the deprecated -realtime option")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Martin Joerg <martin.joerg@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/
Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
* target/i386: decode address before going back to translate.c
* meson: allow configuring the x86-64 baseline
* meson: remove dead optimization option
* exec: small changes to allow compilation with C++ in Android emulator
* fix SEV compilation on 32-bit systems
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ+8mEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMVmAf+PjJBpMYNFb2qxJDw5jI7hITsrtm4
v5TKo9x7E3pna5guae5ODFencYhBITQznHFa3gO9w09QN7Gq/rKjuBBST9VISslU
dW3HtxY9A1eHQtNqHuD7jBWWo9N0hhNiLRa6xz/VDTjEJSxhjSdK2bRW9Yz9hZAe
8bbEEC9us21RdFTS+eijOMo9SPyASUlqIq4RbQpbAVuzzOMeXnfOuX9VSTcBy9o2
7cKMg7zjL8WQugJKynyl5lny7m1Ji55LD2UrYMF6Mik3Wz5kwgHcUITJ+ZHd/9hR
a+MI7o/jyCPdmX9pBvJCxyerCVYBu0ugLqYKpAcsqU6111FLrnGgDvHf/g==
=LdYd
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* configure: detect --cpu=mipsisa64r6
* target/i386: decode address before going back to translate.c
* meson: allow configuring the x86-64 baseline
* meson: remove dead optimization option
* exec: small changes to allow compilation with C++ in Android emulator
* fix SEV compilation on 32-bit systems
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ+8mEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMVmAf+PjJBpMYNFb2qxJDw5jI7hITsrtm4
# v5TKo9x7E3pna5guae5ODFencYhBITQznHFa3gO9w09QN7Gq/rKjuBBST9VISslU
# dW3HtxY9A1eHQtNqHuD7jBWWo9N0hhNiLRa6xz/VDTjEJSxhjSdK2bRW9Yz9hZAe
# 8bbEEC9us21RdFTS+eijOMo9SPyASUlqIq4RbQpbAVuzzOMeXnfOuX9VSTcBy9o2
# 7cKMg7zjL8WQugJKynyl5lny7m1Ji55LD2UrYMF6Mik3Wz5kwgHcUITJ+ZHd/9hR
# a+MI7o/jyCPdmX9pBvJCxyerCVYBu0ugLqYKpAcsqU6111FLrnGgDvHf/g==
# =LdYd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Jun 2024 10:26:57 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target/i386/sev: Fix printf formats
target/i386/sev: Use size_t for object sizes
target/i386: SEV: store pointer to decoded id_auth in SevSnpGuest
target/i386: SEV: rename sev_snp_guest->id_auth
target/i386: SEV: store pointer to decoded id_block in SevSnpGuest
target/i386: SEV: rename sev_snp_guest->id_block
target/i386: remove unused enum
target/i386: give CC_OP_POPCNT low bits corresponding to MO_TL
target/i386: use cpu_cc_dst for CC_OP_POPCNT
target/i386: fix CC_OP dump
include: move typeof_strip_qual to compiler.h, use it in QAPI_LIST_LENGTH()
exec: don't use void* in pointer arithmetic in headers
exec: avoid using C++ keywords in function parameters
block: rename former bdrv_file_open callbacks
block: remove separate bdrv_file_open callback
block: do not check bdrv_file_open
block: make assertion more generic
meson: remove dead optimization option
meson: allow configuring the x86-64 baseline
Revert "host/i386: assume presence of SSE2"
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This code was using both uint32_t and uint64_t for len.
Consistently use size_t instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240626194950.1725800-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_auth_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_auth" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_block_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_block" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle it like the other arithmetic cc_ops. This simplifies a
bit the implementation of bit test instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is the only CCOp, among those that compute ZF from one of the cc_op_*
registers, that uses cpu_cc_src. Do not make it the odd one off,
instead use cpu_cc_dst like the others.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POPCNT was missing, and the entries were all out of order after
ADCX/ADOX/ADCOX were moved close to EFLAGS. Just use designated
initializers.
Fixes: 4885c3c495 ("target-i386: Use ctpop helper", 2017-01-10)
Fixes: cc155f1971 ("target/i386: rewrite flags writeback for ADCX/ADOX", 2024-06-11)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The typeof_strip_qual() is most useful for the atomic fetch-and-modify
operations in atomic.h, but it can be used elsewhere as well. For example,
QAPI_LIST_LENGTH() assumes that the argument is not const, which is not a
requirement.
Move the macro to compiler.h and, while at it, move it under #ifndef
__cplusplus to emphasize that it uses C-only constructs. A C++ version
of typeof_strip_qual() using type traits is possible[1], but beyond the
scope of this patch because the little C++ code that is in QEMU does not
use QAPI.
The patch was tested by changing the declaration of strv_from_str_list()
in qapi/qapi-type-helpers.c to:
char **strv_from_str_list(const strList *const list)
This is valid C code, and it fails to compile without this change.
[1] https://lore.kernel.org/qemu-devel/20240624205647.112034-1-flwu@google.com/
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Tested-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
void* pointer arithmetic is a GCC extentension which could not be
available in other build tools (e.g. C++). This changes removes this
assumption.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240620201654.598024-1-rkir@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there is no bdrv_file_open callback anymore, rename the implementations
so that they end with "_open" instead of "_file_open". NFS is the exception
because all the functions are named nfs_file_*.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_file_open and bdrv_open are completely equivalent, they are
never checked except to see which one to invoke. So merge them
into a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The set of BlockDrivers that have .bdrv_file_open coincides with those
that have .protocol_name and guess what---checking drv->bdrv_file_open
is done to see if the driver is a protocol. So check drv->protocol_name
instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
.bdrv_needs_filename is only set for drivers that also set bdrv_file_open,
i.e. protocol drivers.
So we can make the assertion always, it will always pass for those drivers
that use bdrv_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a Meson option to configure which x86-64 instruction
set to use. QEMU will now default to x86-64-v1 + cmpxchg16b for
64-bit builds (that corresponds to a Pentium 4 for 32-bit builds).
The baseline can be tuned down to Pentium Pro for 32-bit builds (with
-Dx86_version=0), or up as desired.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit b18236897c.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 433cd6d94a.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 45ccdbcb24.
The x86-64 instruction set can now be tuned down to x86-64 v1
or i386 Pentium Pro.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat it as a MIPS64 machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level. We
can invoke trigger_common_match() to check the privilege levels of the
type 3 triggers.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-4-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_watchpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the watchpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only load/store bits and loaded/stored address should be further checked
in riscv_cpu_debug_check_watchpoint().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V Debug specification version 0.13 [1] (also applied
to version 1.0 [2] but it has not been ratified yet), there are several
common matching conditions before firing a trigger, including the
enabled privilege levels of the trigger.
This commit adds trigger_common_match() to prepare the common matching
conditions for the type 2/3/6 triggers. For now, we just implement
trigger_priv_match() to check if the enabled privilege levels of the
trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_breakpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the breakpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only the execution bit and the executed PC should be futher checked in
riscv_cpu_debug_check_breakpoint().
[1]: https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote
[2]: https://github.com/riscv/riscv-debug-spec/releases/tag/1.0.0-rc1-asciidoc
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the old-fashioned extension auto-update check statements as
they are replaced by the extension implied rules.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc extension has special implied rules that need to be handled separately.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add multi extension implied rules to enable the implied extensions of
the multi extension recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add MISA extension implied rules to enable the implied extensions
of MISA recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce helpers to enable the extensions based on the implied rules.
The implied extensions are enabled recursively, so we don't have to
expand all of them manually. This also eliminates the old-fashioned
ordering requirement. For example, Zvksg implies Zvks, Zvks implies
Zvksed, etc., removing the need to check the implied rules of Zvksg
before Zvks.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the MISA or other extensions.
'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores
the offset of the extension defined in RISCVCPUConfig. 'ext' will also
serve as the key of the hash tables to look up the rule in the following
commit.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240625114629.27793-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When icount is enabled, rather than returning the virtual CPU time, we
should return the instruction count itself. Add an instructions bool
parameter to get_ticks() to correctly return icount_get_raw() when
icount_enabled() == 1 and instruction count is queried. This will modify
the existing behavior which was returning an instructions count close to
the number of cycles (CPI ~= 1).
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240618112649.76683-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
helper_froundnx_h function mistakenly uses single percision nanbox
check instead of the half percision one. This patch fixes the issue.
Signed-off-by: Branislav Brzak <brzakbranislav@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240608214546.226963-1-brzakbranislav@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on the priv-1.13.0, add the exception codes for Software-check and
Hardware-error.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privileged spec 1.13, the RV32 needs to implement MEDELEGH
and HEDELEGH for exception codes 32-47 for reserving and exception codes
48-63 for custom use. Add the CSR number though the implementation is
just reading zero and writing ignore. Besides, for accessing HEDELEGH, it
should be controlled by mstateen0 'P1P13' bit.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privilege 1.13 spec, there should be a bit56 for 'P1P13' in
mstateen0 that controls access to the hedeleg.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add macros and variables for RISC-V privilege 1.13 support.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
