When we run “qemu-system-loongarch64 -qmp stdio -vnc none -S”,
we get an error message “Need kernel filename” and then we can't use qmp cmd to query some information.
So, we just throw a warning and then the cpus starts running from address VIRT_FLASH0_BASE.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241030012359.4040817-1-gaosong@loongson.cn>
Nothing in LoongArch fw_cfg.c requires target specific definitions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.
Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The description about virt machine type is removed by mistake, add
new description here. Here is output result with command
"./qemu-system-loongarch64 -M help"
Supported machines are:
none empty machine
virt QEMU LoongArch Virtual Machine (default)
x-remote Experimental remote machine
Without the patch, it shows as follows:
Supported machines are:
none empty machine
virt (null) (default)
x-remote Experimental remote machine
Fixes: ef2f11454c(hw/loongarch/virt: Replace Loongson IPI with LoongArch IPI)
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Serial port console redirection table can be used for default serial
port selection, like chosen stdout-path selection with FDT method.
With acpi SPCR table added, early debug console can be parsed from
SPCR table with simple kernel parameter earlycon rather than
earlycon=uart,mmio,0x1fe001e0
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907073037.243353-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function.
This is the same procedure that's done in b91b6b5a2c ("hw/microblaze:
pass random seed to fdt"), e4b4f0b71c ("hw/riscv: virt: pass random seed
to fdt"), c6fe3e6b4c ("hw/openrisc: virt: pass random seed to fdt"),
67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry"), c287941a4d
("hw/rx: pass random seed to fdt"), 5e19cc68fb ("hw/mips: boston: pass
random seed to fdt"), 6b23a67916 ("hw/nios2: virt: pass random seed to fdt")
c4b075318e ("hw/ppc: pass random seed to fdt"), and 5242876f37
("hw/arm/virt: dt: add rng-seed property").
These earlier commits later were amended to rerandomize the RNG seed on
snapshot load, but the LoongArch code somehow already does that, despite
not having this patch here, presumably due to some lucky copy and
pasting.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240905153316.2038769-1-Jason@zx2c4.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In order to support additional channels of communication using
`-serial`, add several serial ports, up to the standard 4 generally
supported by the 8250 driver.
Fixed: https://lore.kernel.org/all/20240907143439.2792924-1-Jason@zx2c4.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Bibo Mao <maobibo@loongson.cn>
[gaosong: ACPI uart need't reverse order]
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907143439.2792924-1-Jason@zx2c4.com>
For virtio VGA deivce libvirt will select VIRTIO_VGA firstly rather than
VIRTIO_GPU, VIRTIO_VGA device supports frame buffer however it requires
legacy VGA compatible support. Frame buffer area 0xa0000 -- 0xc0000
conflicts with low memory area 0 -- 0x10000000.
Here remove default support for VIRTIO_VGA device, VIRTIO_GPU is prefered
on LoongArch system. For frame buffer video card support, standard VGA can
be used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240823073050.2619484-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Loongarch IPI inherits from class LoongsonIPICommonClass, and it
only contains Loongarch 3A5000 virt machine specific interfaces,
rather than mix different machine implementations together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-14-philmd@linaro.org>
Add devices that support tpm by default,
Fixed incomplete tpm acpi table information.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624032300.999157-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
memcpy() is trying to READ 512 bytes from memory,
pointed by info->kernel_cmdline,
which was (presumable) allocated by g_strdup("");
Found with ASAN, making check with enabled sanitizers.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240628123910.577740-1-frolov@swemel.ru>
Signed-off-by: Song Gao <gaosong@loongson.cn>
'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Use MemTxAttrs interface read_with_attrs/write_with_attrs
for virt_iocsr_misc_ops.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-3-gaosong@loongson.cn>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Higher bits for memory nodes were omitted at qemu_fdt_setprop_cells.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240520-loongarch-fdt-memnode-v1-1-5ea9be93911e@flygoat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Some qtest test cases such as numa use default memory size of generic
machine class, which is 128M by fault.
Here generic default memory size is used, and also remove minimum memory
size which is 1G originally.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-6-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
For system dram memory region, it is not necessary to use numa node
information. There is only low memory region and high memory region.
Remove numa node information for ddr memory region here, it can reduce
memory region number on LoongArch virt machine.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Memory map table for fwcfg is used for UEFI BIOS, UEFI BIOS uses the first
entry from fwcfg memory map as the first memory HOB, the second memory HOB
will be used if the first memory HOB is used up.
Memory map table for fwcfg does not care about numa node, however in
generic the first memory HOB is part of numa node0, so that runtime
memory of UEFI which is allocated from the first memory HOB is located
at numa node0.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.
Limitations for minimum memory size for both total memory and numa
node0 is removed for fadt numa memory table creation.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.
Limitations for minimum memory size for both total memory and numa
node0 is removed for acpi srat table creation.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If VM runs in kvm mode, VM mode is added in IOCSR feature register.
So guest can detect kvm hypervisor type and enable possible pv functions.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240514025109.3238398-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
=RLFu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240509
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
# 33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
# DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
# 4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
# =RLFu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 May 2024 10:02:10 AM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu:
target/loongarch: Put cpucfg operation before CSR register
target/loongarch: Add TCG macro in structure CPUArchState
hw/loongarch: Refine default numa id calculation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With numa_test test case, there is subcase named test_def_cpu_split(),
there are 8 sockets and 2 numa nodes. Here is command line:
"-machine smp.cpus=8,smp.sockets=8 -numa node,memdev=ram -numa node"
The required result is:
node 0 cpus: 0 2 4 6
node 1 cpus: 1 3 5 7
Test case numa_test fails on LoongArch, since the actual result is:
node 0 cpus: 0 1 2 3
node 1 cpus: 4 5 6 7
It will be better if all the cpus in one socket share the same numa
node. Here socket id is used to calculate numa id in function
virt_get_default_cpu_node_id().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240319022606.2994565-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with LoongArchVirtMachineState
*lvms.
Rename function specific for virtmachine loongarch_xxx()
with virt_xxx(). However some common functions keep unchanged such as
loongarch_acpi_setup()/loongarch_load_kernel(), since there functions
can be used for real hw boards.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-3-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE.
Machine name about Other real hw boards can be added in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-2-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The char pointer 'ramName' point to a block of memory,
but never free it. Use 'g_autofree' to automatically free it.
Resolves: Coverity CID 1544773
Fixes: 0cf1478d6 ("hw/loongarch: Add numa support")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240507022239.3113987-1-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Ensure that it can be used even if virt.c is not included in the build, as
is the case for --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240507145135.270803-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with Loongarch.
No changes to generated config-devices.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rtc node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-18-gaosong@loongson.cn>
uart node need interrupts and interrupt-parent cells.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-17-gaosong@loongson.cn>
This patch removes the unused fdt irqchip node.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-16-gaosong@loongson.cn>
This patch adds pcie irq_map node for FDT.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-15-gaosong@loongson.cn>
The efi_system_table adds a efi_fdt configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-9-gaosong@loongson.cn>
The efi_system_table adds a efi_initrd configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-8-gaosong@loongson.cn>
The efi_system_table adds a efi_boot_memmap configuration table.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-7-gaosong@loongson.cn>
Add init_systab and set boot_info->a2
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240426091551.2397867-6-gaosong@loongson.cn>
