As of bd5c51ee6c, chardevs no longer use
bottom-halves to issue CHR_EVENT_OPENED events. To maintain past
semantics, we instead defer the CHR_EVENT_OPENED events toward the end
of chardev initialization.
For muxes, this isn't good enough, since a range of FEs must be able
to attach to the mux prior to any CHR_EVENT_OPENED being issued, else
each FE will immediately print it's initial output (prompts, banners,
etc.) just prior to us switching to the next FE as part of
initialization.
The is new and confusing behavior for users, as they'll see output for
things like the HMP monitor, even though their the current mux focus
may be a guest serial port with potentially no output.
We fix this by further deferring CHR_EVENT_OPENED events for FEs
associated with muxes until after machine init by flagging mux chardevs
with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED
events until we explicitly set the mux as opened later.
Currently, we must defer till after machine init since we potentially
associate FEs with muxes as part of realize (for instance,
serial_isa_realizefn).
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this patch dump-guest-memory on s390 produces an ELF formatted,
crash-readable dump.
In order to implement this, the arch-specific part of dump-guest-memory
was added:
target-s390x/arch_dump.c contains the whole set of function for writing
Elf note sections of all types for s390x.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[fixed indentation, use CamelCase, rename note_t to Note, use S390CPU]
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.
Examples:
-global i440FX-pcihost.pci-hole64-size=4G
-global q35-pcihost.pci-hole64-size=4G
Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move PCIEPort's "port" property to the new type, same for "aer_log_max".
Move PCIESlot's "chassis" and "slot" properties to the new type.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE]
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: refuse to start if device is already in use
dataplane: enable virtio-blk x-data-plane=on live migration
migration: fix spice migration
migration: notify migration state before starting thread
block: Repair the throttling code.
gluster: Add image resize support
Message-id: 1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Categorize devices that appear as output to "-device ?" command
by logical functionality. Sort the devices by logical categories
before showing them to user.
The sort is done by functionality rather than alphabetical.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-3-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Made small tweaks in code to prevent compilation issues
when importing qemu/bitmap.h in qdev-core
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling code was segfaulting since commit
02ffb50448 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).
Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.
For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* 'trivial-patches' of git://git.corpit.ru/qemu:
target-mips: Remove assignment to a variable which is never used
misc: Use g_assert_not_reached for code which is expected to be unreachable
qemu-options: mention C-a h in the -nographic doc
misc: Fix new typos in comments and strings
linux-user: correct argument number for sys_mremap and sys_splice
PPC: dbdma: macio: Fix format specifiers (build regression)
watchdog: Remove break after exit
exec: Remove env from list of poisoned names
hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
timer: make timers_state static
aes: Remove unused code (NDEBUG, u16)
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The global variable env was removed some time ago, so this name may be
used without any restriction now.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Kevin Wolf (16) and Ian Main (2)
# Via Kevin Wolf
* kwolf/for-anthony:
Add tests for sync modes 'TOP' and 'NONE'
Implement sync modes for drive-backup.
Implement qdict_flatten()
blockdev: Split up 'cache' option
blockdev: Rename 'readonly' option to 'read-only'
qcow2: Use dashes instead of underscores in options
blockdev: Rename I/O throttling options for QMP
QemuOpts: Add qemu_opt_unset()
block: Allow "driver" option on the top level
qapi: Anonymous unions
qapi.py: Maintain a list of union types
qapi: Add consume argument to qmp_input_get_object()
qapi: Flat unions with arbitrary discriminator
qapi: Add visitor for implicit structs
docs: Document QAPI union types
qapi-visit.py: Implement 'base' for unions
qapi-visit.py: Split off generate_visit_struct_fields()
qapi-types.py: Implement 'base' for unions
Message-id: 1374870032-31672-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.
It also simplifies the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.
FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.
For sync mode TOP are creating a new target image using the same backing
file as the original disk image. Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.
Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.
For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made. This preserves the point in time data by only copying the parts
that are *going to change* to the target image. This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image. This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.
Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case). The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.
Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdict_flatten(): For each nested QDict with key x, all fields with key y
are moved to this QDict and their key is renamed to "x.y". This operation
is applied recursively for nested QDicts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The discriminator for anonymous unions is the data type. This allows to
have a union type that allows both of these:
{ 'file': 'my_existing_block_device_id' }
{ 'file': { 'filename': '/tmp/mydisk.qcow2', 'read-only': true } }
Unions like this are specified in the schema with an empty dict as
discriminator. For this example you could take:
{ 'union': 'BlockRef',
'discriminator': {},
'data': { 'definition': 'BlockOptions',
'reference': 'str' } }
{ 'type': 'ExampleObject',
'data: { 'file': 'BlockRef' } }
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These can be used when an embedded struct is parsed and members not
belonging to the struct may be present in the input (e.g. parsing a
flat namespace QMP union, where fields from both the base and one
of the alternative types are mixed in the JSON object)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not used anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michael R. Hines (8) and others
# Via Juan Quintela
* quintela/migration.next:
migration: add autoconvergence documentation
Fix real mode guest segments dpl value in savevm
Fix real mode guest migration
rdma: account for the time spent in MIG_STATE_SETUP through QMP
rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition
rdma: allow state transitions between other states besides ACTIVE
rdma: send pc.ram
rdma: core logic
rdma: introduce ram_handle_compressed()
rdma: bugfix: ram_control_save_page()
rdma: update documentation to reflect new unpin support
Message-id: 1374590725-14144-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When forwarding a segmentation fault into the guest process, we were passing
the host's address directly into the guest process's signal descriptor.
That obviously confused the guest process, since it didn't know what to make
of the (usually 32-bit truncated) address. Passing in h2g(address) makes the
guest process a lot happier.
To make the code more obvious, introduce a h2g_nocheck() macro that does the
same as h2g(), but allows us to convert addresses that may be outside of guest
mapped range into the guest's view of address space.
This fixes java running in arm-linux-user for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This gives RDMA shared access to madvise() on the destination side
when an entire chunk is found to be zero.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make inline target_memory_rw_debug() always available and change its
argument to CPUState. Let it check if CPUClass::memory_rw_debug provides
a specialized callback and fall back to cpu_memory_rw_debug() otherwise.
The only overriding implementation is for 32-bit sparc.
This prepares for changing GDBState::g_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Callback implementations were specific to arm and m68k, so can easily
cast to ARMCPU and M68kCPU respectively.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer directly used since converting CPU loops to
CPUState.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
vaddr is to target_ulong what uintmax_t is to unsigned int.
Its purpose is to allow turning per-target functions with target_ulong
arguments into CPUClass hooks.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.
Signed-off-by: Andreas Färber <afaerber@suse.de>
And remove variables if possible.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Converted remaining access and renamed to parent_obj]
Signed-off-by: Andreas Färber <afaerber@suse.de>
A common operation in instruction decoding is to take a field
from an instruction that represents a signed integer in some
arbitrary number of bits, and sign extend it into a C signed
integer type for manipulation. Provide new functions sextract32()
and sextract64() which perform this operation; they are like
the existing extract32() and extract64() except that the field
is sign-extended into the returned result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1372419632-5521-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=AvPS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130722' into staging
arm-devs queue
# gpg: Signature made Mon 22 Jul 2013 06:38:52 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell (8) and Soren Brinkmann (2)
# Via Peter Maydell
* pmaydell/tags/pull-arm-devs-20130722:
hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header
hw/loader: Support ramdisk with u-boot header
vexpress: Add virtio-mmio transports
vexpress: Make VEDBoardInfo extend arm_boot_info
arm/boot: Allow boards to modify the FDT blob
virtio: Implement MMIO based virtio transport
virtio: Support transports which can specify the vring alignment
virtio: Add support for guest setting of queue size
arm/boot: Use qemu_devtree_setprop_sized_cells()
device_tree: Add qemu_devtree_setprop_sized_cells() utility functions
Message-id: 1374493427-3254-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks
with a u-boot header.
To enable this and leverage synergies 'load_uimage()' is refactored to
accomodate this additional use case.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
Support virtio transports which can specify the vring alignment
(ie where the guest communicates this to the host) by providing
a new virtio_queue_set_align() function. (The default alignment
remains as before.)
Transports which wish to make use of this must set the
has_variable_vring_alignment field in their VirtioBusClass
struct to true; they can then change the alignment via
virtio_queue_set_align().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org
The MMIO virtio transport spec allows the guest to tell the host how
large the queue size is. Add virtio_queue_set_num() function which
implements this in the QEMU common virtio support code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org
We already have a qemu_devtree_setprop_cells() which sets a dtb
property to an array of cells whose values are specified by varargs.
However for the fairly common case of setting a property to a list
of addresses or of address,size pairs the number of cells used by
each element in the list depends on the parent's #address-cells
and #size-cells properties. To make this easier we provide an analogous
qemu_devtree_setprop_sized_cells() macro which allows the number
of cells used by each element to be specified. This is implemented
using an underlying qemu_devtree_setprop_sized_cells_from_array()
function which takes the values and sizes as an array; this may
also be directly useful for cases where the cell contents are
constructed programmatically.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-2-git-send-email-peter.maydell@linaro.org
this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.
additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BH will be used outside big lock, so introduce lock to protect
between the writers, ie, bh's adders and deleter. The lock only
affects the writers and bh's callback does not take this extra lock.
Note that for the same AioContext, aio_bh_poll() can not run in
parallel yet.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode. This patch makes it possible
to start and stop dataplane any time while the guest is running.
This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration. In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference. It may be useful in the virtio-net dataplane effort.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All targets have been converted to allocating space for temporaries
on the stack. No need to allocate space within the CPU_COMMON block.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Chegu Vinod
# Via Juan Quintela
* quintela/migration.next:
Force auto-convegence of live migration
Add 'auto-converge' migration capability
Introduce async_run_on_cpu()
Message-id: 1373664508-5404-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Old qemu versions required that 1st s/g entry is the header.
Since QEMU 1.5, patchset titled "virtio-net: iovec handling cleanup"
removed this limitation but a feature bit is needed so guests know it's
safe to lay out header differently.
This patch applies on top and adds such a feature bit to QEMU.
It is set by default for virtio-net.
virtio net header inline with the data is beneficial
for latency and small packet bandwidth - guest driver
code utilizing this feature has been acked but missed 3.11
by a narrow margin, it's pending for 3.12.
This feature bit is cleared by default when compatibility with old
machine types is requested.
Other performance-sensitive devices (blk and scsi)
don't yet support arbitrary s/g layouts, so
we only set this bit for virtio-net for now.
There are plans to allow arbitrary layouts there, but
no code has been posted yet.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.
Design:
QEMU notifies Libvirt when rx-filter config is changed in guest,
then Libvirt query the rx-filter information by a monitor command,
and sync the change to macvtap device. Related rx-filter config
of the nic contains main mac, rx-mode items and vlan table.
This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.
Test:
If we repeatedly add/remove vlan, and change macaddr of vlan
interfaces in guest by a loop script.
Result:
The events will flood the QMP client(management), management takes
too much resource to process the events.
Event_throttle API (set rate to 1 ms) can avoid the events to flood
QMP client, but it could cause an unexpected delay (~1ms), guests
guests normally expect rx-filter updates immediately.
So we use a flag for each nic to avoid events flooding, the event
is emitted once until the query command is executed. The flag
implementation could not introduce unexpected delay.
There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.
Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
"additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If flushing the block devices fails, return an error. The VM is stopped
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_flush() can fail, and bdrv_flush_all() should return an error as
well if this happens for a block device. It returns the first error
return now, but still at least tries to flush the remaining devices even
in error cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).
This allows opening relative file names that contain a colon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The auto-converge migration capability allows the user to specify if they
choose live migration seqeunce to automatically detect and force convergence.
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce an asynchronous version of run_on_cpu() i.e. the caller
doesn't have to block till the call back routine finishes execution
on the target vcpu.
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.
Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.
However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.
So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.
Signed-off-by: Alexander Graf <agraf@suse.de>
Soon we will introduce intermediate processing pauses which will
allow the bottom half to restart a DMA request that couldn't be
fulfilled yet.
For that to work, move the processing variable into the io struct
which is what DMA providers work with.
While touching it, also change it into a bool
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA controller has a bottom half to asynchronously process DMA
request queues.
This bh was stored as a gross static variable. Move it into the device
struct instead.
While at it, move all users of it to the new generic kick function.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA engine really is running all the time, waiting for input. However
we don't want to waste cycles constantly polling.
So introduce a kick function that data providers can call to notify the
DBDMA controller of new input.
Signed-off-by: Alexander Graf <agraf@suse.de>
We usually keep struct and constant definitions in header files. Move
them there to stay consistent and to make access to fields easier.
Signed-off-by: Alexander Graf <agraf@suse.de>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Fix for LP#1187529: Devices on PCI bridge stop working when
live-migrated. Update bridge mappings for all PCI bridge
devices in get_pci_config_device().
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.
This adds reset logging for alpha, unicore32 and xtensa.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since current_cpu is CPUState it no longer depends on CPUPPCState.
Move ppce500_set_mpic_proxy() to a new hw/ppc/ppc_e500.h because
hw/ppc/ppc.h is too heavily using CPUPPCState and PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since CPU loops are done as last step in kvm_{insert,remove}_breakpoint()
and kvm_remove_all_breakpoints(), we do not need to distinguish between
invoking CPU and iterated CPUs and can thereby free the identifier for
use as a global variable.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used in the next few commits to fix or clean up queries of
"machine" options (-machine and its sugared forms).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It seems to be unused since several years (commit
be995c2764 in 2006).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1373044036-14443-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The host_buses list is an odd structure - a list of pointers to PCI root
buses existing in parallel to the normal qdev tree structure. This patch
removes it, instead putting the link pointers into the PCIHostState
structure, which have a 1:1 relationship to PCIHostBus structures anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus *
and device/function number within that bus. Currently it assumes it is
working on an address under the primary PCI root bus. This patch extends
it to allow the caller to specify a root bus. This might seem a little odd
since the supplied address can (theoretically) include a PCI domain number.
However, attempting to use a non-zero domain number there is currently an
error, so that shouldn't really cause problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.
This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string. The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform. When no callback is
available we fall back on the qbus name.
Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless. The exception
is pci_get_dev_path(), whose results form part of migration streams. To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).
For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges). Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.
Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently pci_find_domain() performs two functions - it locates the PCI
root bus above the given bus, then looks up that root bus's domain number.
This patch adds a helper function to perform the first task, finding the
root bus for a given PCI device. This is then used in pci_find_domain().
This changes pci_find_domain()'s signature slightly, taking a PCIDevice
instead of a PCIBus - since all callers passed something of the form
dev->bus, this simplifies things slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This same treatment previously done to phys_node_map and phys_sections
is now applied to the dispatch field of AddressSpace. Topology updates
use as->next_dispatch while accesses use as->dispatch.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help having two copies of AddressSpaceDispatch during the
recreation of the radix tree (one being built, and one that is complete
and will be protected by RCU). We do not want to have to unregister and
re-register the listener.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We're already using them in several places, but __sync builtins are just
too ugly to type, and do not provide seqcst load/store operations.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch it would not be used elsewhere anyway. Also,
the _nofail and the standard versions of this function return different
things, which is confusing. Removing the function from the public headers
limits the confusion.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new API will avoid having too many memory_region_ref/unref
in paths that currently use memory_region_find.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Whenever memory regions are accessed outside the BQL, they need to be
preserved against hot-unplug. MemoryRegions actually do not have their
own reference count; they piggyback on a QOM object, their "owner".
The owner is set at creation time, and there is a function to retrieve
the owner.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples memory.h from ioport.h, concentrating all portio related
types in a single header.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the latter may vanish one day, make sure the vmport read handler
type will remain unaffected. This is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove unused ioport_register and isa_unassign_ioport along with
everything that only those services used.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current ioport dispatcher is a complex beast, mostly due to the
need to deal with old portio interface users. But we can overcome it
without converting all portio users by embedding the required base
address of a MemoryRegionPortio access into that data structure. That
removes the need to have the additional MemoryRegionIORange structure
in the loop on every access.
To handle old portio memory ops, we simply install dispatching handlers
for portio memory regions when registering them with the memory core.
This removes the need for the old_portio field.
We can drop the additional aliasing of ioport regions and also the
special address space listener. cpu_in and cpu_out now simply call
address_space_read/write. And we can concentrate portio handling in a
single source file.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open-code isa_is_ioport_assigned via a memory region lookup. As all IO
ports are now directly or indirectly registered via the memory API, this
becomes possible and will finally allow us to drop the ioport tables.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci_read_devaddr() is only used by the legacy functions for the old PCI
hotplug interface in pci-hotplug-old.c. So we move the function there,
and make it static.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid use of static variables: PC systems
initialize pvpanic device through pvpanic_init,
so we can simply create the fw_cfg file at that point.
This also makes it possible to skip device
creation completely if fw_cfg is not there, e.g. for xen -
so the ports it reserves are not discoverable by guests.
Also, make pvpanic_init void since callers ignore return
status anyway.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest currently has to jump through lots of hoops to guess the PCI hole
ranges. It's fragile, and makes us change BIOS each time we add a new
chipset. Let's report the window in a ROM file, to make BIOS do exactly
what QEMU intends.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes we need to pass ranges around, add a
handy structure for this purpose.
Note: memory.c defines its own concept of AddrRange structure for
working with 128 addresses. It's necessary there for doing range math.
This is not needed for most users: struct Range is
much simpler, and is only used for passing the range around.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For add, the carry only requires checking one of the arguments.
For sub and neg, we can similarly optimize computation of the
carry.
For ge, we can just do lexicographic order.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.
Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions. It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.
The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.
While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls. Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.
Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant and cast macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.
Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we can have different types of interrupt controllers, so we really
only know that we are going to use one when we created it.
Export kvm_init_irq_routing() to common code, so that we don't have to call
kvm_irqchip_create().
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.
However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.
Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
# By Gerd Hoffmann (13) and Michael Tokarev (1)
# Via Michael Tokarev
* mjt/trivial-patches:
doc: we use seabios, not bochs bios
qemu-socket: don't leak opts on error
qemu-char: report udp backend errors
qemu-char: add -chardev mux support
qemu-char: minor mux chardev fixes
qemu-char: use ChardevBackendKind in CharDriver
qemu-char: don't leak opts on error
qemu-char: fix documentation for telnet+wait socket flags
qemu-char: print notification to stderr
qemu-char: use more specific error_setg_* variants
qemu-char: check optional fields using has_*
qemu-socket: catch monitor_get_fd failures
qemu-socket: drop pointless allocation
qemu-socket: zero-initialize SocketAddress
Message-id: 1372443465-22384-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use it for all targets, but be careful not to pass invalid CPUState.
cpu_single_env can be NULL, e.g. on Xen.
Signed-off-by: Andreas Färber <afaerber@suse.de>
While not normally needed for *-user, it can safely be used there since
always based on uint64_t, to avoid ifdeffery.
To avoid accidental uses, move the guards from exec/hwaddr.h to its
inclusion sites. No need for them in include/hw/.
Prepares for hwaddr use in qom/cpu.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use CPUState::env_ptr for now.
Prepares for changing cpu_handle_guest_debug() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer uses CPUArchState.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed.
Prepares for changing qemu_kvm_init_cpu_signals() argument to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A few targets already managed to implement cpu_save() and cpu_load()
without defining CPU_SAVE_VERSION that causes them to be registered.
Guard the prototypes with CPU_SAVE_VERSION to avoid this happening again
until all targets are converted to VMState (or QIDL).
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used to embed common CPU state into CPU subclasses.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It's the equivalent to cpu_class_set_vmsd(), to assign
DeviceClass::vmsd. It wasn't needed before since only static,
unmigratable VMStateDescriptions were assigned so far.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It's CPUClass::vmsd, not CPUState::vmsd.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
backup_start() creates a block job that copies a point-in-time snapshot
of a block device to a target block device.
We call backup_do_cow() for each write during backup. That function
reads the original data from the block device before it gets
overwritten. The data is then written to the target device.
Currently backup cluster size is hardcoded to 65536 bytes.
[I made a number of changes to Dietmar's original patch and folded them
in to make code review easy. Here is the full list:
* Drop BackupDumpFunc interface in favor of a target block device
* Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes()
* Use 0 delay instead of 1us, like other block jobs
* Unify creation/start functions into backup_start()
* Simplify cleanup, free bitmap in backup_run() instead of cb
* function
* Use HBitmap to avoid duplicating bitmap code
* Use bdrv_getlength() instead of accessing ->total_sectors
* directly
* Delete the backup.h header file, it is no longer necessary
* Move ./backup.c to block/backup.c
* Remove #ifdefed out code
* Coding style and whitespace cleanups
* Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks
* Keep our own in-flight CowRequest list instead of using block.c
tracked requests. This means a little code duplication but is much
simpler than trying to share the tracked requests list and use the
backup block size.
* Add on_source_error and on_target_error error handling.
* Use trace events instead of DPRINTF()
-- stefanha]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed. This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.
Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
notifier_list_notify() has no return value. This is fine when we just
want to invoke side-effects.
Sometimes it's useful for notifiers to produce a return value. This
allows notifiers to "veto" an operation and will be used by the block
layer before-write notifier.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.
For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:
1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.
Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These are the prototypes and implementation of new hooks that
RDMA takes advantage of to perform dynamic page registration.
An optional hook is also introduced for a custom function
to be able to override the default save_page function.
Also included are the prototypes and accessor methods used by
arch_init.c which invoke funtions inside savevm.c to call out
to the hooks that may or may not have been overridden
inside of QEMUFileOps.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is used during RDMA initialization in order to
transmit a description of all the RAM blocks to the
peer for later dynamic chunk registration purposes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA uses this to flush the control channel before sending its
own message to handle page registrations.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMUFileRDMA also has read and write modes. This function is now
shared to reduce code duplication.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This exposes throughput (in megabits/sec) through QMP.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The RDMA event channel can be made non-blocking just like a TCP
socket. Exporting this function allows us to yield so that the
QEMU monitor remains available.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA writes happen asynchronously, and thus the performance accounting
also needs to be able to occur asynchronously. This allows anybody
to call into savevm.c to update both f->pos as well as into arch_init.c
to update the acct_info structure with up-to-date values when
the RDMA transfer actually completes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This reverts commit 9f24a8030a.
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value. Applies to emulated devices only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some arguments to these functions are booleans - either by declaration,
or by actual usage, but sometimes value of 0 or 1 is passed for a bool,
and sometimes it is declared as int but a bool value, or true/false,
is passed to it instead. Clean it up a bit.
Cc: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using macros instead of static functions for dolog and for ldebug
simplifies the code and can also reduce the total code size.
GCC_ATTR was only used in audio_int.h, so it is now unused and
the definition can be removed from compiler.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a NotifierList to MemoryRegions which represent IOMMUs
allowing other parts of the code to register interest in mappings or
unmappings from the IOMMU. All IOMMU implementations will need to call
memory_region_notify_iommu() to inform those waiting on the notifier list,
whenever an IOMMU mapping is made or removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory region type that translates addresses it is given,
then forwards them to a target address space. This is similar to
an alias, except that the mapping is more flexible than a linear
translation and trucation, and also less efficient since the
translation happens at runtime.
The implementation uses an AddressSpace mapping the target region to
avoid hierarchical dispatch all the way to the resolved region; only
iommu regions are looked up dynamically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[Modified to put translation in address_space_translate; assume
IOMMUs are not reachable from TCG. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
