fd40901c82
80837 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Stefan Hajnoczi
|
fd40901c82 |
libvhost-user: return early on virtqueue errors
vu_panic() is not guaranteed to exit the program. Return early when errors are encountered. Note that libvhost-user does not have an "unmap" operation for mapped descriptors. Therefore it is correct to return without explicit cleanup. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200921113420.154378-2-stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Li Qiang
|
2bc9e0da57 |
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes:
|
||
|
Ani Sinha
|
0ed93f4c05 |
tests/acpi: update golden master DSDT binary table blobs for q35
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
df4008c9c5 |
piix4: don't reserve hw resources when hotplug is off globally
When acpi hotplug is turned off for both root pci bus as well as for pci bridges, we should not generate the related ACPI code for DSDT table or initialize related hw ports or reserve hw resources. This change makes sure all those operations are turned off in the case ACPI pci hotplug is off globally. In this change, we also make sure ACPI code for the PCNT method are only added when bsel is enabled for the corresponding pci bus or bridge hotplug is turned on. As q35 machines do not use bsel for it's pci buses at this point in time, this change affects DSDT acpi table for q35 machines as well. Therefore, we will also need to commit the updated golden master DSDT table acpi binary blobs as well. Following is the list of blobs which needs updating: tests/data/acpi/q35/DSDT tests/data/acpi/q35/DSDT.acpihmat tests/data/acpi/q35/DSDT.bridge tests/data/acpi/q35/DSDT.cphp tests/data/acpi/q35/DSDT.dimmpxm tests/data/acpi/q35/DSDT.ipmibt tests/data/acpi/q35/DSDT.memhp tests/data/acpi/q35/DSDT.mmio64 tests/data/acpi/q35/DSDT.numamem tests/data/acpi/q35/DSDT.tis These tables are updated in the following commit. Without the updated table blobs, the unit tests would fail with this patch. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-11-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Ani Sinha
|
c4bb646ffb |
Add ACPI DSDT tables for q35 that are being updated by the next patch
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
8b434b031f |
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
This patch adds a binary blob corresponding to the DSDT acpi table. It is used
to unit test the flag 'acpi-pci-hotplug-with-bridge-support' used with pci
bridges.
This change also clears the file tests/qtest/bios-tables-test-allowed-diff.h
so that future changes which affect the table can be caught.
The following is the diff between files tests/data/acpi/pc/DSDT.bridge and
tests/data/acpi/pc/DSDT.hpbridge after disassembly :
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 23:21:34 2020
+ * Disassembly of /tmp/aml-7UURQ0, Fri Sep 11 23:21:34 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001A89 (6793)
+ * Length 0x0000131F (4895)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x09
+ * Checksum 0xF9
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -859,522 +859,32 @@
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
- Name (BSEL, One)
- Device (S00)
- {
- Name (_SUN, Zero) // _SUN: Slot User Number
- Name (_ADR, Zero) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S08)
- {
- Name (_SUN, One) // _SUN: Slot User Number
- Name (_ADR, 0x00010000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S10)
- {
- Name (_SUN, 0x02) // _SUN: Slot User Number
- Name (_ADR, 0x00020000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S18)
- {
- Name (_SUN, 0x03) // _SUN: Slot User Number
- Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S20)
- {
- Name (_SUN, 0x04) // _SUN: Slot User Number
- Name (_ADR, 0x00040000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S28)
- {
- Name (_SUN, 0x05) // _SUN: Slot User Number
- Name (_ADR, 0x00050000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S30)
- {
- Name (_SUN, 0x06) // _SUN: Slot User Number
- Name (_ADR, 0x00060000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S38)
- {
- Name (_SUN, 0x07) // _SUN: Slot User Number
- Name (_ADR, 0x00070000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S40)
- {
- Name (_SUN, 0x08) // _SUN: Slot User Number
- Name (_ADR, 0x00080000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S48)
- {
- Name (_SUN, 0x09) // _SUN: Slot User Number
- Name (_ADR, 0x00090000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S50)
- {
- Name (_SUN, 0x0A) // _SUN: Slot User Number
- Name (_ADR, 0x000A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S58)
- {
- Name (_SUN, 0x0B) // _SUN: Slot User Number
- Name (_ADR, 0x000B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S60)
- {
- Name (_SUN, 0x0C) // _SUN: Slot User Number
- Name (_ADR, 0x000C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S68)
- {
- Name (_SUN, 0x0D) // _SUN: Slot User Number
- Name (_ADR, 0x000D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S70)
- {
- Name (_SUN, 0x0E) // _SUN: Slot User Number
- Name (_ADR, 0x000E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S78)
- {
- Name (_SUN, 0x0F) // _SUN: Slot User Number
- Name (_ADR, 0x000F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S80)
- {
- Name (_SUN, 0x10) // _SUN: Slot User Number
- Name (_ADR, 0x00100000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S88)
- {
- Name (_SUN, 0x11) // _SUN: Slot User Number
- Name (_ADR, 0x00110000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S90)
- {
- Name (_SUN, 0x12) // _SUN: Slot User Number
- Name (_ADR, 0x00120000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S98)
- {
- Name (_SUN, 0x13) // _SUN: Slot User Number
- Name (_ADR, 0x00130000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA0)
- {
- Name (_SUN, 0x14) // _SUN: Slot User Number
- Name (_ADR, 0x00140000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA8)
- {
- Name (_SUN, 0x15) // _SUN: Slot User Number
- Name (_ADR, 0x00150000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB0)
- {
- Name (_SUN, 0x16) // _SUN: Slot User Number
- Name (_ADR, 0x00160000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB8)
- {
- Name (_SUN, 0x17) // _SUN: Slot User Number
- Name (_ADR, 0x00170000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC0)
- {
- Name (_SUN, 0x18) // _SUN: Slot User Number
- Name (_ADR, 0x00180000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC8)
- {
- Name (_SUN, 0x19) // _SUN: Slot User Number
- Name (_ADR, 0x00190000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD0)
- {
- Name (_SUN, 0x1A) // _SUN: Slot User Number
- Name (_ADR, 0x001A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD8)
- {
- Name (_SUN, 0x1B) // _SUN: Slot User Number
- Name (_ADR, 0x001B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE0)
- {
- Name (_SUN, 0x1C) // _SUN: Slot User Number
- Name (_ADR, 0x001C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE8)
- {
- Name (_SUN, 0x1D) // _SUN: Slot User Number
- Name (_ADR, 0x001D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF0)
- {
- Name (_SUN, 0x1E) // _SUN: Slot User Number
- Name (_ADR, 0x001E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF8)
- {
- Name (_SUN, 0x1F) // _SUN: Slot User Number
- Name (_ADR, 0x001F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Method (DVNT, 2, NotSerialized)
- {
- If ((Arg0 & One))
- {
- Notify (S00, Arg1)
- }
-
- If ((Arg0 & 0x02))
- {
- Notify (S08, Arg1)
- }
-
- If ((Arg0 & 0x04))
- {
- Notify (S10, Arg1)
- }
-
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
- If ((Arg0 & 0x10))
- {
- Notify (S20, Arg1)
- }
-
- If ((Arg0 & 0x20))
- {
- Notify (S28, Arg1)
- }
-
- If ((Arg0 & 0x40))
- {
- Notify (S30, Arg1)
- }
-
- If ((Arg0 & 0x80))
- {
- Notify (S38, Arg1)
- }
-
- If ((Arg0 & 0x0100))
- {
- Notify (S40, Arg1)
- }
-
- If ((Arg0 & 0x0200))
- {
- Notify (S48, Arg1)
- }
-
- If ((Arg0 & 0x0400))
- {
- Notify (S50, Arg1)
- }
-
- If ((Arg0 & 0x0800))
- {
- Notify (S58, Arg1)
- }
-
- If ((Arg0 & 0x1000))
- {
- Notify (S60, Arg1)
- }
-
- If ((Arg0 & 0x2000))
- {
- Notify (S68, Arg1)
- }
-
- If ((Arg0 & 0x4000))
- {
- Notify (S70, Arg1)
- }
-
- If ((Arg0 & 0x8000))
- {
- Notify (S78, Arg1)
- }
-
- If ((Arg0 & 0x00010000))
- {
- Notify (S80, Arg1)
- }
-
- If ((Arg0 & 0x00020000))
- {
- Notify (S88, Arg1)
- }
-
- If ((Arg0 & 0x00040000))
- {
- Notify (S90, Arg1)
- }
-
- If ((Arg0 & 0x00080000))
- {
- Notify (S98, Arg1)
- }
-
- If ((Arg0 & 0x00100000))
- {
- Notify (SA0, Arg1)
- }
-
- If ((Arg0 & 0x00200000))
- {
- Notify (SA8, Arg1)
- }
-
- If ((Arg0 & 0x00400000))
- {
- Notify (SB0, Arg1)
- }
-
- If ((Arg0 & 0x00800000))
- {
- Notify (SB8, Arg1)
- }
-
- If ((Arg0 & 0x01000000))
- {
- Notify (SC0, Arg1)
- }
-
- If ((Arg0 & 0x02000000))
- {
- Notify (SC8, Arg1)
- }
-
- If ((Arg0 & 0x04000000))
- {
- Notify (SD0, Arg1)
- }
-
- If ((Arg0 & 0x08000000))
- {
- Notify (SD8, Arg1)
- }
-
- If ((Arg0 & 0x10000000))
- {
- Notify (SE0, Arg1)
- }
-
- If ((Arg0 & 0x20000000))
- {
- Notify (SE8, Arg1)
- }
-
- If ((Arg0 & 0x40000000))
- {
- Notify (SF0, Arg1)
- }
-
- If ((Arg0 & 0x80000000))
- {
- Notify (SF8, Arg1)
- }
- }
-
- Method (PCNT, 0, NotSerialized)
- {
- BNUM = One
- DVNT (PCIU, One)
- DVNT (PCID, 0x03)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1779,22 +1289,21 @@
If ((Arg0 & 0x40000000))
{
Notify (SF0, Arg1)
}
If ((Arg0 & 0x80000000))
{
Notify (SF8, Arg1)
}
}
Method (PCNT, 0, NotSerialized)
{
BNUM = Zero
DVNT (PCIU, One)
DVNT (PCID, 0x03)
- ^S18.PCNT ()
}
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-9-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
5e3a486211 |
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
This change adds a new unit test for the global flag 'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci bridges in i440fx. The flag can be used to turn off ACPI based hotplug support on all pci bridges. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-8-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Ani Sinha
|
0fb41e8987 |
tests/acpi: list added acpi table binary file for pci bridge hotplug test
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under i440fx. This change documents this fact. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-7-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Ani Sinha
|
15a5b25408 |
i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
8ad038abb9 |
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
|
||
|
Ani Sinha
|
df00a52972 |
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
to unit test hotplug on/off capability on the root pci bus for i440fx.
The diff between the table DSDT.bridge and DSDT.roothp is listed below:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 22:51:04 2020
+ * Disassembly of /tmp/aml-UGIHQ0, Fri Sep 11 22:51:04 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001A89 (6793)
+ * Length 0x0000140A (5130)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x09
+ * Checksum 0xE6
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -831,61 +831,60 @@
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0510, // Range Minimum
0x0510, // Range Maximum
0x01, // Alignment
0x0C, // Length
)
})
}
}
Scope (\_SB)
{
Scope (PCI0)
{
- Name (BSEL, Zero)
Device (S00)
{
Name (_ADR, Zero) // _ADR: Address
}
Device (S10)
{
Name (_ADR, 0x00020000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
- Name (BSEL, One)
+ Name (BSEL, Zero)
Device (S00)
{
Name (_SUN, Zero) // _SUN: Slot User Number
Name (_ADR, Zero) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S08)
{
Name (_SUN, One) // _SUN: Slot User Number
Name (_ADR, 0x00010000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
@@ -1345,456 +1344,30 @@
Notify (SE8, Arg1)
}
If ((Arg0 & 0x40000000))
{
Notify (SF0, Arg1)
}
If ((Arg0 & 0x80000000))
{
Notify (SF8, Arg1)
}
}
Method (PCNT, 0, NotSerialized)
{
- BNUM = One
+ BNUM = Zero
DVNT (PCIU, One)
DVNT (PCID, 0x03)
}
}
- Device (S20)
- {
- Name (_SUN, 0x04) // _SUN: Slot User Number
- Name (_ADR, 0x00040000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S28)
- {
- Name (_SUN, 0x05) // _SUN: Slot User Number
- Name (_ADR, 0x00050000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S30)
- {
- Name (_SUN, 0x06) // _SUN: Slot User Number
- Name (_ADR, 0x00060000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S38)
- {
- Name (_SUN, 0x07) // _SUN: Slot User Number
- Name (_ADR, 0x00070000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S40)
- {
- Name (_SUN, 0x08) // _SUN: Slot User Number
- Name (_ADR, 0x00080000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S48)
- {
- Name (_SUN, 0x09) // _SUN: Slot User Number
- Name (_ADR, 0x00090000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S50)
- {
- Name (_SUN, 0x0A) // _SUN: Slot User Number
- Name (_ADR, 0x000A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S58)
- {
- Name (_SUN, 0x0B) // _SUN: Slot User Number
- Name (_ADR, 0x000B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S60)
- {
- Name (_SUN, 0x0C) // _SUN: Slot User Number
- Name (_ADR, 0x000C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S68)
- {
- Name (_SUN, 0x0D) // _SUN: Slot User Number
- Name (_ADR, 0x000D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S70)
- {
- Name (_SUN, 0x0E) // _SUN: Slot User Number
- Name (_ADR, 0x000E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S78)
- {
- Name (_SUN, 0x0F) // _SUN: Slot User Number
- Name (_ADR, 0x000F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S80)
- {
- Name (_SUN, 0x10) // _SUN: Slot User Number
- Name (_ADR, 0x00100000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S88)
- {
- Name (_SUN, 0x11) // _SUN: Slot User Number
- Name (_ADR, 0x00110000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S90)
- {
- Name (_SUN, 0x12) // _SUN: Slot User Number
- Name (_ADR, 0x00120000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (S98)
- {
- Name (_SUN, 0x13) // _SUN: Slot User Number
- Name (_ADR, 0x00130000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA0)
- {
- Name (_SUN, 0x14) // _SUN: Slot User Number
- Name (_ADR, 0x00140000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SA8)
- {
- Name (_SUN, 0x15) // _SUN: Slot User Number
- Name (_ADR, 0x00150000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB0)
- {
- Name (_SUN, 0x16) // _SUN: Slot User Number
- Name (_ADR, 0x00160000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SB8)
- {
- Name (_SUN, 0x17) // _SUN: Slot User Number
- Name (_ADR, 0x00170000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC0)
- {
- Name (_SUN, 0x18) // _SUN: Slot User Number
- Name (_ADR, 0x00180000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SC8)
- {
- Name (_SUN, 0x19) // _SUN: Slot User Number
- Name (_ADR, 0x00190000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD0)
- {
- Name (_SUN, 0x1A) // _SUN: Slot User Number
- Name (_ADR, 0x001A0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SD8)
- {
- Name (_SUN, 0x1B) // _SUN: Slot User Number
- Name (_ADR, 0x001B0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE0)
- {
- Name (_SUN, 0x1C) // _SUN: Slot User Number
- Name (_ADR, 0x001C0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SE8)
- {
- Name (_SUN, 0x1D) // _SUN: Slot User Number
- Name (_ADR, 0x001D0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF0)
- {
- Name (_SUN, 0x1E) // _SUN: Slot User Number
- Name (_ADR, 0x001E0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Device (SF8)
- {
- Name (_SUN, 0x1F) // _SUN: Slot User Number
- Name (_ADR, 0x001F0000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
- }
-
- Method (DVNT, 2, NotSerialized)
- {
- If ((Arg0 & 0x10))
- {
- Notify (S20, Arg1)
- }
-
- If ((Arg0 & 0x20))
- {
- Notify (S28, Arg1)
- }
-
- If ((Arg0 & 0x40))
- {
- Notify (S30, Arg1)
- }
-
- If ((Arg0 & 0x80))
- {
- Notify (S38, Arg1)
- }
-
- If ((Arg0 & 0x0100))
- {
- Notify (S40, Arg1)
- }
-
- If ((Arg0 & 0x0200))
- {
- Notify (S48, Arg1)
- }
-
- If ((Arg0 & 0x0400))
- {
- Notify (S50, Arg1)
- }
-
- If ((Arg0 & 0x0800))
- {
- Notify (S58, Arg1)
- }
-
- If ((Arg0 & 0x1000))
- {
- Notify (S60, Arg1)
- }
-
- If ((Arg0 & 0x2000))
- {
- Notify (S68, Arg1)
- }
-
- If ((Arg0 & 0x4000))
- {
- Notify (S70, Arg1)
- }
-
- If ((Arg0 & 0x8000))
- {
- Notify (S78, Arg1)
- }
-
- If ((Arg0 & 0x00010000))
- {
- Notify (S80, Arg1)
- }
-
- If ((Arg0 & 0x00020000))
- {
- Notify (S88, Arg1)
- }
-
- If ((Arg0 & 0x00040000))
- {
- Notify (S90, Arg1)
- }
-
- If ((Arg0 & 0x00080000))
- {
- Notify (S98, Arg1)
- }
-
- If ((Arg0 & 0x00100000))
- {
- Notify (SA0, Arg1)
- }
-
- If ((Arg0 & 0x00200000))
- {
- Notify (SA8, Arg1)
- }
-
- If ((Arg0 & 0x00400000))
- {
- Notify (SB0, Arg1)
- }
-
- If ((Arg0 & 0x00800000))
- {
- Notify (SB8, Arg1)
- }
-
- If ((Arg0 & 0x01000000))
- {
- Notify (SC0, Arg1)
- }
-
- If ((Arg0 & 0x02000000))
- {
- Notify (SC8, Arg1)
- }
-
- If ((Arg0 & 0x04000000))
- {
- Notify (SD0, Arg1)
- }
-
- If ((Arg0 & 0x08000000))
- {
- Notify (SD8, Arg1)
- }
-
- If ((Arg0 & 0x10000000))
- {
- Notify (SE0, Arg1)
- }
-
- If ((Arg0 & 0x20000000))
- {
- Notify (SE8, Arg1)
- }
-
- If ((Arg0 & 0x40000000))
- {
- Notify (SF0, Arg1)
- }
-
- If ((Arg0 & 0x80000000))
- {
- Notify (SF8, Arg1)
- }
- }
-
Method (PCNT, 0, NotSerialized)
{
- BNUM = Zero
- DVNT (PCIU, One)
- DVNT (PCID, 0x03)
^S18.PCNT ()
}
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Ani Sinha
|
274763957b |
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
|
||
|
Ani Sinha
|
eb9609a17d |
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
|
||
|
haibinzhang(张海斌)
|
f66337bdbf |
vhost-user: save features of multiqueues if chardev is closed
Fore-commit(
|
||
|
Daniel P. Berrangé
|
48a7ff4d51 |
qemu-options: document SMBIOS type 11 settings
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200923133804.2089190-4-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Daniel P. Berrangé
|
10c3666658 |
hw/smbios: report error if table size is too large
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the total length of the tables. If the user passes -smbios configuration to QEMU that causes the table size to exceed this limit then various bad behaviours result, including - firmware hangs in an infinite loop - firmware triggers a KVM crash on bad memory access - firmware silently discards user's SMBIOS data replacing it with a generic data set. Limiting the size to 0xffff in QEMU avoids triggering most of these problems. There is a remaining bug in SeaBIOS which tries to prepend its own data for table 0, and does not check whether there is sufficient space before attempting this. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200923133804.2089190-3-berrange@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Daniel P. Berrangé
|
bb99f4772f |
hw/smbios: support loading OEM strings values from a file
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
6e2e2e8a42 |
tests: acpi: update acpi blobs with new AML
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
9cc5a90b0e |
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
In case firmware has negotiated CPU hotplug SMI feature, generate AML to describe SMI IO port region and send SMI to firmware on each CPU hotplug SCI in case new CPUs were hotplugged. Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running we can't send SMI before new CPUs are fetched from QEMU as it could cause sending Notify to a CPU that firmware hasn't seen yet. So fetch new CPUs into local cache first, then send SMI and after that send Notify events to cached CPUs. This should ensure that Notify is sent only to CPUs which were processed by firmware first. Any CPUs that were hotplugged after caching will be processed by the next CPU_SCAN_METHOD, when pending SCI is handled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
998ba95016 |
x86: acpi: introduce the PCI0.SMI0 ACPI device
When CPU hotplug with SMI has been negotiated, describe the SMI register block in the DSDT. Pass the ACPI name of the SMI control register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the register in the next patch. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
6d837f1f38 |
x86: acpi: introduce AcpiPmInfo::smi_on_cpuhp
Translate the "CPU hotplug with SMI" feature bit, from the property added in the last patch, to a dedicated boolean in AcpiPmInfo. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
eb8f7f9178 |
x86: ich9: expose "smi_negotiated_features" as a QOM property
Expose the "smi_negotiated_features" field of ICH9LPCState as a QOM property. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
2f509200bb |
tests: acpi: mark to be changed tables in bios-tables-test-allowed-diff
... to let tests pass until binary blobs are updated with new AML Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200923094650.1301166-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
5776fa998d |
acpi: add aml_land() and aml_break() primitives
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
b48ad7c02b |
x86: cpuhp: refuse cpu hot-unplug request earlier if not supported
CPU hot-unplug with SMM requires firmware participation to prevent guest crash (i.e. CPU can be removed only after OS _and_ firmware were prepared for the action). Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT feature bit, which is advertised by firmware when it has support for CPU hot-unplug. Use it to check if guest is able to handle unplug and make device_del fail gracefully if hot-unplug feature hasn't been negotiated. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
c5be7517d6 |
x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in use
There were reports of guest crash on CPU hotplug, when using q35 machine type and OVMF with SMM, due to hotplugged CPU trying to process SMI at default SMI handler location without it being relocated by firmware first. Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with SMI support while SMI broadcast is in use. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-3-imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
00dc02d284 |
x86: lpc9: let firmware negotiate 'CPU hotplug with SMI' features
It will allow firmware to notify QEMU that firmware requires SMI being triggered on CPU hot[un]plug, so that it would be able to account for hotplugged CPU and relocate it to new SMM base and/or safely remove CPU on unplug. Using negotiated features, follow up patches will insert SMI upcall into AML code, to make sure that firmware processes hotplug before guest OS would attempt to use new CPU. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Li Qiang
|
2d69eba5fe |
virtio: update MemoryRegionCaches when guest set bad features
Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes:
|
||
|
Stefano Garzarella
|
a6704a34cf |
vhost-vsock-ccw: force virtio version 1
virtio-vsock was introduced after the release of VIRTIO 1.0 specifications, so it should be 'modern-only'. This patch forces virtio version 1 as done for vhost-vsock-pci. To avoid migration issues, we force virtio version 1 only when legacy check is enabled in the new machine types (>= 5.1). Cc: qemu-stable@nongnu.org Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-5-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Stefano Garzarella
|
27eda699f5 |
vhost-user-vsock-pci: force virtio version 1
Commit
|
||
|
Stefano Garzarella
|
6209070503 |
vhost-vsock-pci: force virtio version 1
Commit
|
||
|
Stefano Garzarella
|
d55f518248 |
virtio: skip legacy support check on machine types less than 5.1
Commit |
||
|
Laurent Vivier
|
40bc0ca924 |
configure: Fix build dependencies with vhost-vdpa.
Following the same logic as for vhost-net-user and vhost-kernel, enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not explicitly disabled. See |
||
|
Laurent Vivier
|
778e67de4c |
vhost-vdpa: add trace-events
Add trace functions in vhost-vdpa.c. All traces from this file can be enabled with '-trace vhost_vdpa*'. Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200925091055.186023-3-lvivier@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Laurent Vivier
|
bbb169080f |
util/hexdump: introduce qemu_hexdump_line()
Dumping one line of hexadecimal/ASCII from a buffer is often needed. Move this part from qemu_hexdump() and use it Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200925091055.186023-2-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Pankaj Gupta
|
f68ec01fe9 |
virtio-pmem-pci: force virtio version 1
Qemu fails with below error when trying to run with virtio pmem:
(qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
device is modern-only, use disable-legacy=on
This patch fixes this by forcing virtio 1 with virtio-pmem.
fixes:
|
||
|
Eric Auger
|
8f39562a1b |
virtio-iommu-pci: force virtio version 1
Commit
|
||
|
Eric Auger
|
59bf980d22 |
virtio-iommu: Check gtrees are non null before destroying them
If realize fails, domains and endpoints trees may be NULL. On unrealize(), this produces assertions: "GLib: g_tree_destroy: assertion 'tree != NULL' failed" Check that the trees are non NULL before destroying them. Cc: qemu-stable@nongnu.org Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200908193309.20569-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
63e79833c4 |
cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants. Users should use device_add command instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200915120403.1074579-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Dima Stepanov
|
892040dc8b |
tests/qtest/vhost-user-test: prepare the tests for adding new dev class
For now only vhost-user-net device is supported by the test. Other vhost-user devices are not tested. As a first step make source code refactoring so new devices can reuse the same test routines. To make this provide a new vhost_user_ops structure with the methods to initialize device, its command line or make a proper vhost-user responses. Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Dima Stepanov
|
1e5a050f57 |
vhost: check queue state in the vhost_dev_set_log routine
If the vhost-user-blk daemon provides only one virtqueue, but device was added with several queues, then QEMU will send more VHOST-USER command than expected by daemon side. The vhost_virtqueue_start() routine handles such case by checking the return value from the virtio_queue_get_desc_addr() function call. Add the same check to the vhost_dev_set_log() routine. Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Dima Stepanov
|
f5b22d06fb |
vhost: recheck dev state in the vhost_migration_log routine
vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
- the device will be in the stopped state, so it will not be changed
during migration
- if reconnect will be made the migration log will be reinitialized as
part of reconnect/init process:
#0 vhost_log_global_start (listener=0x563989cf7be0)
at hw/virtio/vhost.c:920
#1 0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2664
#2 0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2740
#3 0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
busyloop_timeout=0)
at hw/virtio/vhost.c:1385
#4 0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
at hw/block/vhost-user-blk.c:315
#5 0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
event=CHR_EVENT_OPENED)
at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.
This migration issue was slightly discussed earlier:
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
David Hildenbrand
|
d110b6b4d6 |
pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.
Cc: qemu-stable@nongnu.org # v5.1
Fixes:
|
||
|
Li Qiang
|
0c404e45c5 |
virtio-mem: detach the element from the virtqueue when error occurs
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes:
|
||
|
Jason Wang
|
a5bd05800f |
vhost-vdpa: batch updating IOTLB mappings
To speed up the memory mapping updating between vhost-vDPA and vDPA device driver, this patch passes the IOTLB batching flags via IOTLB API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint that a bathced IOTLB updating may be initiated from the userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished the updating: VHOST_IOTLB_BATCH_BEGIN VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE ... VHOST_IOTLB_BATCH_END Vhost-vDPA can then know that all mappings has been set and can do optimization like passing all the mappings to the vDPA device driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Jason Wang
|
b37556edec |
vhost: switch to use IOTLB v2 format
This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.
To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.
The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Jason Wang
|
e6546342a8 |
linux headers: sync to 5.9-rc4
Update against Linux 5.9-rc4. Cc: Cornelia Huck <cohuck@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-2-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Peter Maydell
|
74504514b1 |
Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9wl2IACgkQIeENKd+X cFSN7gf8CtertCR9QCXELwY/4qOZq5/yLBX1cQkNYMGrkZ9n3hpGUifHBnmKvNkH VvhhuJAX0BnSftSaSSlWezFdwn/hwTRiVYaLnTC/sLrv3hBgoAqykKIDS1ncAgGx U7VwZH0oQVhQjBzMeYYMOhIwyOFeY1+5Odhs1uuyzHZ7qBGbtm+1EDrG4hXHJNBj oQnqtr093SzpR20uPQo1Dm1+6aF9Iw/9Kb8jBAChduTF0uEVvbl/WEtUB/7r+Dme ishAtZi4OxVJCZhDLlIAUM/4lsLv32OPcD5JjKlZpPBnziZg1jubI1nhVGnWY1g+ m+b9MjNrZ7u1jgegLng3c+SvAxAd2Q== =Ma9R -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging Two small patches. One with a fix for the register API instance_size and one for removing unused address variables from load_elf. # gpg: Signature made Sun 27 Sep 2020 14:45:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-register-20200927: core/register: Specify instance_size in the TypeInfo load_elf: Remove unused address variables from callers Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Peter Maydell
|
92d0950267 |
Trivial Patches Pull request 20200928
-----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9xqZQSHGxhdXJlbnRA dml2aWVyLmV1AAoJEPMMOL0/L748nFQQAJL/5ydfeo+t9RVTfatMI6bRP+loqQzc Y/t/xYgOfCQsMjXRU5HHNre+FtltqP0lVU2Ey2zAon7MjJDXfQOCv6aOK+vsOGXi FITC6vZ050VrVy7iPfXaJR5aIbkJme4NXLgJj9mqaFZELgoTAMCuCkGN+km3n/Uw pf0lI43VSkLt3pvHvGjy2UT51OjH6/LxaXcgY2w67nIH+KcLgxdh7fXlD+5Gxdug 458gbMbtqAPb6qNV7jBbrgUMRx5hpUKoa5QvL0DWkIsboemPJGsTlw0nhON5ZPQ7 XYNPyb9ELPYE5V8I9Ki+ESzsWFMVMdu0Hj/MNbnSDdg+2uR0xgCSIRnnuEwpSmLB jbhKa8b3B3nPFFNQAqQ6FPpOW76PpwFVKRAPT3p3rnDqrtXLUJpGdGzTz8ltMZry pOxdbSkuEl+79D1i5Lt5mfCqRNqOjYk1awPO4K/JdmhJxk9dFmY5X21edaIe6lN+ GiZlE43fF+GM3HelplnTCIwlRAjhUX/PRSDBkeLuPYj0qFob27MFauMcsGvC28FI CQIY3CmIFCmzf8c1DUE3TVYWpJj0e+OnKU02D89/FF4M4TOGTa1/CtpNcpSDgE5A TCEw4cyEG1LEvDtw4DRdLBKVDnFW8XiUPz2xVC87/dZSC88CTllLnxtsaSfDHuui 0Y0BBZ3MJxgs =t5Q1 -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Trivial Patches Pull request 20200928 # gpg: Signature made Mon 28 Sep 2020 10:15:00 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: docs/system/deprecated: Move lm32 and unicore32 to the right section migration/multifd: Remove superfluous semicolons timer: Fix timer_mod_anticipate() documentation vhost-vdpa: remove useless variable Add *.pyc back to the .gitignore file virtio: vdpa: omit check return of g_malloc meson: fix static flag summary vhost-vdpa: fix indentation in vdpa_ops Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Alistair Francis
|
e8a612b7e3 |
core/register: Specify instance_size in the TypeInfo
Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <4cf1beb7dafb9143c261d266557d3173bf160524.1598376594.git.alistair.francis@wdc.com> |