Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason
why it should do this; include it directly from the C files which require
it, and drop the include line in qemu.h.
(Note that several of the C files previously relying on this indirect
include were going out of their way to only include gdbstub.h conditionally
on not CONFIG_USER_ONLY!)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the safe-syscall macro from qemu.h into a new safe-syscall.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split out the mmap prototypes into a new header user-mmap.h
which we only include where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split guest-binary loader prototypes out into a new header
loader.h which we include only where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The functions implemented in strace.c are only used in a few files in
linux-user; split them out of qemu.h and into a new strace.h header
which we include in the places that need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We're about to move a lot of the code in qemu.h out into different
header files; fix the coding style nits first so that checkpatch
is happy with the pure code-movement patches. This is mostly
block-comment style but also a few whitespace issues.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Added functionality to trigger ITS command queue processing on
write to CWRITE register and process each command queue entry to
identify the command type and handle commands like MAPD,MAPC,SYNC.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-4-shashi.mallela@linaro.org
[PMM: fixed format string nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Defined descriptors for ITS device table,collection table and ITS
command queue entities.Implemented register read/write functions,
extract ITS table parameters and command queue parameters,extended
gicv3 common to capture qemu address space(which host the ITS table
platform memories required for subsequent ITS processing) and
initialize the same in ITS device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added register definitions relevant to ITS,implemented overall
ITS device framework with stubs for ITS control and translater
regions read/write,extended ITS common to handle mmio init between
existing kvm device and newer qemu device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although we probe for the IPA limits imposed by KVM (and the hardware)
when computing the memory map, we still use the old style '0' when
creating a scratch VM in kvm_arm_create_scratch_host_vcpu().
On systems that are severely IPA challenged (such as the Apple M1),
this results in a failure as KVM cannot use the default 40bit that
'0' represents.
Instead, probe for the extension and use the reported IPA limit
if available.
Cc: Andrew Jones <drjones@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20210822144441.1290891-2-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've got SW that expects FSBL (Bootlooader) to setup clocks and
resets. It's quite common that users run that SW on QEMU without
FSBL (FSBL typically requires the Xilinx tools installed). That's
fine, since users can stil use -device loader to enable clocks etc.
To help folks understand what's going, a log (guest-error) message
would be helpful here. In particular with the serial port since
things will go very quiet if they get things wrong.
Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-7-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Read or write to uart registers when unclocked or in reset should be
ignored. Add the check there, and as a result of this, the check in
uart_write_tx_fifo() is now unnecessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This converts uart_read() and uart_write() to memop_with_attrs() ops.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the clock/reset check is done in uart_receive(), but we
can move the check to uart_can_receive() which is earlier.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present when input clock is disabled, any character transmitted
to tx fifo can still show on the serial line, which is wrong.
Fixes: b636db306e ("hw/char/cadence_uart: add clock support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of today, when booting upstream U-Boot for Xilinx Zynq, the UART
does not receive anything. Debugging shows that the UART input clock
frequency is zero which prevents the UART from receiving anything as
per the logic in uart_receive().
From zynq_slcr_reset_exit() comment, it intends to compute output
clocks according to ps_clk and registers. zynq_slcr_compute_clocks()
is called to accomplish the task, inside which device_is_in_reset()
is called to actually make the attempt in vain.
Rework reset_hold() and reset_exit() so that in the reset exit phase,
the logic can really compute output clocks in reset_exit().
With this change, upstream U-Boot boots properly again with:
$ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \
-device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0
Fixes: 38867cb7ec ("hw/misc/zynq_slcr: add clock generation for uarts")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fedora has switched to a different CoC. QEMU's own code of conduct
is based on the previous version and cites it as a source. Replace
the link with one to the Wayback Machine.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A parameter max_size was added to the RAMBlockNotifier
ram_block_added function. Use the max_size for pre allocation
of hva space.
Signed-off-by: Reinoud Zandijk <Reinoud@NetBSD.org>
Message-Id: <20210718134650.1191-3-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Userland targers will otherwise use a poisoned CONFIG_NVMM
Signed-off-by: Reinoud Zandijk <Reinoud@NetBSD.org>
Message-Id: <20210718134650.1191-2-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This seems to be either a glibc or gcc bug, but the code
appears to be fine with the warning suppressed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803211907.150525-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file already existed, but nobody had noticed the warning until now.
Add it at the bottom, since that is where unknown files go in legacy mode.
Fixes: 217f1b4a72 ("target-i386: Publish advised value of MSR_IA32_FEATURE_CONTROL via fw_cfg")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "python" variable is an external program and can be passed
directly to custom_target. This avoids the need to look it up
multiple times, which was previously silent but is now explicit
in recent Meson versions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running "./configure --static --disable-system" there is currently
a warning if the static version of libpng is missing:
WARNING: Static library 'png16' not found for dependency 'libpng', may not
be statically linked
Since it does not make sense to look for the VNC-related libraries at all
when we're building without system emulator binaries, let's add a check
for have_system here to silence this warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210906153939.165567-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, cpu-models-x86.rst.inc is included in target-i386.rst directly.
To make the toctree more homogeneous when adding more documentation,
include it through a first-class .rst file.
Together with the previous changes to the man page skeletons, this also
frees "===" for the headings, so that cpu-models-x86.rst.inc need not
assume anything about the headings used by target-i386.rst.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Man pages in docs/system use file inclusion heavily. Use headings with
overlines in the main files, so that the same included file work well
from both manuals and man pages.
This style of heading is a bit more heavy-weight, so it is not used by
the other man pages in interop/ and tools/. If in the future they
are changed to use include files, for example to avoid having sections
named "synopsis" or "description", they can switch to --- with overline
as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a standard heading format for the index.rst file in a directory.
Using overlines makes it clear that individual documents can use e.g.
=== for chapter titles and --- for section titles, as suggested in the
Linux kernel guidelines[1]. They could do it anyway, because documents
included in a toctree are parsed separately and therefore are not tied
to the same conventions for headings. However, keeping some consistency is
useful since sometimes files are included from multiple places.
[1] https://www.kernel.org/doc/html/latest/doc-guide/sphinx.html
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Documents within a Sphinx manual are separate files and therefore can use
different conventions for headings. However, keeping some consistency is
useful so that included files are easy to get right.
This patch uses a standard heading format for book titles, so that it is
obvious when a file sits at the top level toctree of a book or man page.
The heading is irrelevant for man pages, but keep it consistent as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The feature allows the VMSAVE and VMLOAD instructions to execute in guest mode without
causing a VMEXIT. (APM2 15.33.1)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Writes to cr8 affect v_tpr. This could set or unset an interrupt
request as the priority might have changed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The APM2 states that if V_IGN_TPR is nonzero, the current
virtual interrupt ignores the (virtual) TPR.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF provides masking capability for when virtual interrupts
are taken. (APM2)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Moved int_ctl into the CPUX86State structure. It removes some
unnecessary stores and loads, and prepares for tracking the vIRQ
state even when it is masked due to vGIF.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF allows STGI and CLGI to execute in guest mode and control virtual
interrupts in guest mode.
When the VGIF feature is enabled then:
* executing STGI in the guest sets bit 9 of the VMCB offset 60h.
* executing CLGI in the guest clears bit 9 of the VMCB offset 60h.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210730070742.9674-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM2 requires that VMRUN and VMLOAD canonicalize (sign extend to 63
from 48/57) all base addresses in the segment registers that have been
respectively loaded.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210804113058.45186-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Booting Fedora kernels with -cpu max hangs very early in boot. Disabling
the la57 CPUID bit fixes the problem. git bisect traced the regression to
commit 213ff024a2 (HEAD, refs/bisect/bad)
Author: Lara Lazier <laramglazier@gmail.com>
Date: Wed Jul 21 17:26:50 2021 +0200
target/i386: Added consistency checks for CR4
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this commit CR4_RESERVED_MASK is missing CR4_LA57_MASK and
two others. Adding this lets Fedora kernels boot once again.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210831175033.175584-1-berrange@redhat.com>
[Removed VMXE/SMXE, matching the commit message. - Paolo]
Fixes: 213ff024a2 ("target/i386: Added consistency checks for CR4", 2021-07-22)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=HpB5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/pull-bsd-user-20210910' into staging
This series of patches gets me to the point that I can run "Hello World" on i386
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
# gpg: Signature made Fri 10 Sep 2021 21:24:08 BST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/pull-bsd-user-20210910: (42 commits)
bsd-user: Update mapping to handle reserved and starting conditions
bsd-user: Add '-0 argv0' option to bsd-user/main.c
bsd-user: Implement interlock for atomic operations
bsd-user: move gemu_log to later in the file
bsd-user: Refactor load_elf_sections and is_target_elf_binary
bsd-user: elfload.c style catch up patch
bsd-user: add stubbed out core dump support
bsd-user: Add target_os_user.h to capture the user/kernel structures
bsd-user: Add target_arch_reg to describe a target's register set
bsd-user: update debugging in mmap.c
bsd-user: Rewrite target system call definintion glue
bsd-user: Remove dead #ifdefs from elfload.c
bsd-user: elf cleanup
bsd-user: Add architecture specific signal tramp code
bsd-user: Move stack initializtion into a per-os file.
bsd-user: Implement --seed and initialize random state
bsd-user: *BSD specific siginfo defintions
bsd-user: Add system independent stack, data and text limiting
bsd-user: Create target specific vmparam.h
bsd-user: define max args in terms of pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the reserved base based on what platform we're on, as well as the
start of the mmap range. Update routines that find va ranges to interact
with the reserved ranges as well as properly align the mapping (this is
especially important for targets whose page size does not match the
host's). Loop where appropriate when the initial address space offered
by mmap does not meet the contraints.
This has 18e80c55bb from linux-user folded in to the upstream
bsd-user code as well.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Previously it was impossible to emulate a program with a file name
different from its argv[0]. With this change, you can run
qemu -0 fakename realname args
which runs the program "realname" with an argv of "fakename args".
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the internlock in fork_start() and fork_end() to properly cope
with atomic operations and to safely keep state for parent and child
processes.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out load_elf_sections and is_target_elf_binary out of
load_elf_interp.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Various style fixes to elfload.c that were too painful to make earlier
in this series.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a stubbed-out version of the bsd-user fork's core dump support. This
allows elfload.c to be almost the same between what's upstream and
what's in qemu-project upstream w/o the burden of reviewing the core
dump support.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
