When performing clock calculations, the ppc405_uc code
has several places where it multiplies together two
32-bit variables and assigns the result to a 64-bit
variable. This doesn't quite do what is intended because
C will compute a 32-bit multiply result. Add casts to
ensure we don't truncate the result.
(Spotted by Coverity, CID 1005504, 1005505.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER, the valid page sizes that the guest can use are bound
to the CPU and not to the memory region. QEMU already has some
fancy logic to find out the right maximum memory size to tell
it to the guest during boot (see getrampagesize() in the file
target/ppc/kvm.c for more information).
However, once we're booted and the guest is using huge pages
already, it is currently still possible to hot-plug memory regions
that does not support huge pages - which of course does not work
on POWER, since the guest thinks that it is possible to use huge
pages everywhere. The KVM_RUN ioctl will then abort with -EFAULT,
QEMU spills out a not very helpful error message together with
a register dump and the user is annoyed that the VM unexpectedly
died.
To avoid this situation, we should check the page size of hot-plugged
DIMMs to see whether it is possible to use it in the current VM.
If it does not fit, we can print out a better error message and
refuse to add it, so that the VM does not die unexpectely and the
user has a second chance to plug a DIMM with a matching memory
backend instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1419466
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix a build error on 32-bit builds with KVM]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Book-E TLB matching process should bail out early when a TLB
entry matches, but the access permissions are wrong. The CPU
will then raise a DSI error instead of a Data TLB error, as
described for TLB matching in Freescale and IBM documents.
Signed-off-by: Alex Zuepke <azu@sysgo.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-vlan device in QEMU has always presented it's MAC address in
the device tree as an 8 byte value, even though PAPR requires it to be
6 bytes. This is because, at the time, AIX required the value to be 8
bytes. However, modern versions of AIX support the (correct) 6
byte value so they no longer require the workaround.
It would be neatest to always provide a 6 byte value but that would
cause a problem with old Linux kernel ibmveth drivers, so the old 8
byte value is still presented when necessary.
Since commit 13f85203e (3.10, May 2013) the driver has been able to
handle 6 or 8 byte addresses so versions after that don't need to be
considered specially.
Drivers from kernels before that can also handle either type of
address, but not always:
* If the first byte's lowest bits are 10, the address must be 6 bytes.
* Otherwise, the address must be 8 bytes.
(The two bits in question are significant in a MAC address: they
indicate a locally-administered unicast address.)
So to maintain compatibility the old 8 byte value is presented when
the lowest two bits of the first byte are not 10.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace SPAPR specific cores[] array with generic
machine->possible_cpus and store core objects there.
It makes cores bookkeeping similar to x86 cpus and
will allow to unify similar code.
It would allow to replace cpu_index based NUMA node
mapping with iproperty based one (for -device created
cores) since possible_cpus carries board defined
topology/layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
possible_cpus could be initialized earlier then cpu objects,
i.e. when -smp is parsed so move init code to possible_cpu_arch_ids()
interface func and do initialization on the first call.
it should help later with making -numa cpu/-smp parsing a machine state
properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw_error() is for CPU related errors only (it prints out a
register dump and calls abort()), so we should not use it
if we just failed to load the bios image. Apart from that,
realize() functions should not exit directly but always set
the errp with error_setg() in case of errors instead.
Additionally, move some code around and delete the bios memory
subregion again in case of such an error, so that we leave a
clean state when returning to the caller.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vpm0 bit was removed from the LPCR in POWER9, this bit controlled
whether ISI and DSI interrupts were directed to the hypervisor or the
partition. These interrupts now go to the hypervisor irrespective, thus
it is no longer necessary to check the vmp0 bit in the LPCR.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The logical partitioning control register controls a threads operation
based on the partition it is currently executing. Add new definitions and
update the mask used when writing to the LPCR based on the POWER9 spec.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 processors implement the mmu as defined in version 3.00 of the ISA.
Add a definition for this mmu model and set the POWER9 cpu model to use
this mmu model.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DPFD field in the LPCR is 3 bits wide. This has always been defined
as 0x3 << shift which indicates a 2 bit field, which is incorrect.
Correct this.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvqpudz: VSX Scalar truncate & Convert Quad-Precision format to
Unsigned Doubleword format
xscvqpuwz: VSX Scalar truncate & Convert Quad-Precision format to
Unsigned Word format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xsaddqpo: VSX Scalar Add Quad-Precision using round to Odd
xsmulqo: VSX Scalar Multiply Quad-Precision using round to Odd
xsdivqpo: VSX Scalar Divide Quad-Precision using round to Odd
xscvqpdpo: VSX Scalar round & Convert Quad-Precision format to
Double-Precision format using round to Odd
xssqrtqpo: VSX Scalar Square Root Quad-Precision using round to Odd
xssubqpo: VSX Scalar Subtract Quad-Precision using round to Odd
In addition, fix the invalid bitmask in the instruction encoding
of xssqrtqp[o].
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
CC: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
float128_to_uint32_round_to_zero() is needed by xscvqpuwz instruction
of PowerPC ISA 3.0.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement float128_to_uint64() and use that to implement
float128_to_uint64_round_to_zero()
This is required by xscvqpudz instruction of PowerPC ISA 3.0.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Power ISA 3.0 introduces a few quadruple precision floating point
instructions that support round-to-odd rounding mode. The
round-to-odd mode is explained as under:
Let Z be the intermediate arithmetic result or the operand of a convert
operation. If Z can be represented exactly in the target format, the
result is Z. Otherwise the result is either Z1 or Z2 whichever is odd.
Here Z1 and Z2 are the next larger and smaller numbers representable
in the target format respectively.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Programs run under qemu-ppc64 on an x86_64 host currently segfault
if they use pthread_create() due to the adjustment made to the NIP in
commit bd6fefe71c.
This patch changes cpu_loop() to set the NIP back to the
pre-incremented value before calling do_syscall(), which causes the
correct address to be used for the new thread and corrects the fault.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the available wait instruction implementation.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbsync: SLB Synchoronize
The instruction provides an ordering function for the effects of all
slbieg instructions executed by the thread executing the slbsync
instruction.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbieg: SLB Invalidate Entry Global
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stwat: Store Word Atomic
stdat: Store Doubleword Atomic
The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ implement stdat, use macro and combine both implementation ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
lwat: Load Word Atomic
ldat: Load Doubleword Atomic
The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ combine both lwat/ldat implementation using macro ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last byte of the option vector was missing due to an off-by-one
error. Without this fix, client architecture support negotiation will
fail because the last byte of option vector 5, which contains the MMU
support, will be missed.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
error_report() already puts a prefix with the program name in front
of the error strings, so the "qemu:" prefix is not necessary here
anymore.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_unplug() were essentially spapr_core_unplug_request()
handler that requested CPU removal and registered callback
which did actual cpu core removali but it was called from
spapr_machine_device_unplug() which is intended for actual object
removal. Commit (cf632463 spapr: Memory hot-unplug support)
sort of fixed it introducing spapr_machine_device_unplug_request()
and calling spapr_core_unplug() but it hasn't renamed callback and
by mistake calls it from spapr_machine_device_unplug().
However spapr_machine_device_unplug() isn't ever called for
cpu core since spapr_core_release() doesn't follow expected
hotunplug call flow which is:
1: device_del() ->
hotplug_handler_unplug_request() ->
set destroy_cb()
2: destroy_cb() ->
hotplug_handler_unplug() ->
object_unparent // actual device removal
Fix it by renaming spapr_core_unplug() to spapr_core_unplug_request()
which is called from spapr_machine_device_unplug_request() and
making spapr_core_release() call hotplug_handler_unplug() which
will call spapr_machine_device_unplug() -> spapr_core_unplug()
to remove cpu core.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reveiwed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug/spapr_core_plug/spapr_core_unplug() are managing
wiring CPU core into spapr machine state and not internal CPU core state.
So move them from spapr_cpu_core.c to spapr.c where other similar
(spapr_memory_[foo]plug()) callbacks are located, which also matches
x86 target practice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Split off destroying VCPU threads from drc callback
spapr_core_release() into new spapr_cpu_core_unrealizefn()
which takes care of internal cpu core state cleanup (i.e.
VCPU threads) and is called when object_unparent(core)
is called.
That leaves spapr_core_release() only with board mgmt
code, which will be moved to board related file in
follow up patch along with the rest on hotplug callbacks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sheepdog URL is broken twice: First it uses a duplicated
http:// prefix, second the website seems to have moved to
https://sheepdog.github.io/sheepdog/ instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
If explicit zeroing out before mirroring is required for the target image,
it moves the block job offset counter to EOF, then offset and len counters
count the image size twice. There is no harm but stats are confusing,
specifically the progress of the operation is always reported as 99% by
management tools.
The patch skips offset increase for the first "technical" pass over the
image. This should not cause any further harm.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1486045515-8009-1-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This adds blockdev-add support for iscsi devices.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
All -iscsi options have a corresponding driver-specific option for the
iscsi block driver now.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
