Commit Graph

1529 Commits

Author SHA1 Message Date
Markus Armbruster
9d49bcf699 Drop the deprecated lm32 target
Target lm32 was deprecated in commit d849800512, v5.2.0.  See there
for rationale.

Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
2021-05-12 18:20:25 +02:00
Markus Armbruster
09ec85176e block: Drop the sheepdog block driver
It was deprecated in commit e1c4269763, v5.2.0.  See that commit
message for rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-12 17:42:23 +02:00
Thomas Huth
875bb7e35b Remove the deprecated moxie target
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-12 17:42:23 +02:00
Markus Armbruster
e11ce6c065 migration: Deprecate redundant query-migrate result @blocked
Result @blocked is true when and only when result @blocked-reasons is
present.  It's always non-empty when present.  @blocked is redundant.
It was introduced in commit 3af8554bd0 "migration: Add blocker
information", and has not been released.  This gives us a chance to
fix the interface with minimal fuss.

Unfortunately, we're already too close to the release to risk dropping
it.  Deprecate it instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210420051907.891470-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-20 10:50:34 +01:00
Thomas Huth
438c61e086 qapi/qom.json: Do not use CONFIG_VIRTIO_CRYPTO in common code
The ObjectType enum and ObjectOptions are included from qapi-types-qom.h
into common code. We should not use target-specific config switches like
CONFIG_VIRTIO_CRYPTO here, since this is not defined in common code and
thus the enum will look differently between common and target specific
code. For this case, it's hopefully enough to check for CONFIG_VHOST_CRYPTO
only (which is a host specific config switch, i.e. it's the same on all
targets).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210412160710.639800-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-14 19:20:40 +01:00
Jason Wang
f9bb0c1f98 Revert "qapi: net: Add query-netdev command"
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
d32ad10a14.

Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08 17:33:59 +08:00
Jason Wang
603f2f7c6c Revert "hmp: Use QAPI NetdevInfo in hmp_info_network"
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
a0724776c5.

Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08 17:33:59 +08:00
Paolo Bonzini
a061a71e0d qapi: qom: do not use target-specific conditionals
ObjectType and ObjectOptions are defined in a target-independent file,
therefore they do not have access to target-specific configuration
symbols such as CONFIG_PSERIES or CONFIG_SEV.  For this reason,
pef-guest and sev-guest are currently omitted when compiling the
generated QAPI files.  In addition, this causes ObjectType to have
different definitions depending on the file that is including
qapi-types-qom.h (currently this is not causing any issues, but it
is wrong).

Define the two enum entries and the SevGuestProperties type
unconditionally to avoid the issue.  We do not expect to have
many target-dependent user-creatable classes, so it is not
particularly problematic.

Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-01 09:40:45 +02:00
Peter Maydell
67c1115edd fixes for 6.0
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmBaCuYACgkQTLbY7tPo
 cThoBhAAzAwi+aYowEDcdxX1NFGngoIg2M2qsmpJ1E2TDJb80DVC7MY/QB5JzzHT
 c9dxMMGCQX519wurAn18eonBYMWwxABjPKu7OpcuqJ20Reu+getgyB8Ib7WWSrNw
 b+51LP7Sb37BvwyYhGnVYVXPnpcBGDyIIyZN1dlJYdZCBGEXodRcDkGREtH3Tnrt
 6UX2oFn4PPtwlPeA1KEwD/Czb7u6G0yNUxoo06wt1ei3P0KHKoLC2J2Q2DIMGOgN
 CZFvqqdqgwSxcS07IFNAc2sUOF01IVkKc5iAEdomJr5JyidraET1958uNs9msoVi
 l3XbHq2XoeEdPZ17voSWmQ/w3u+zkYLR0JoBMqy/9DFmkOLEg+ckxcjBAlwHA7j5
 liQpB5BJQ0V8eCH5KrLwpVVYM8DnV6TStnuQILemvJzZcnTj03y8AoellIOIvPFR
 TUa0dzCrHe1UCBAucs6F27VmsM890HSlVZZnwZ142UDELRpwmLQzaWdwX/1imqBU
 64KRoU8jtzI18EqTKjRZPeZUsABKH9V1aK+rKuJhQbAdEbEEAIS2cvN/BGPBgDYS
 XROh1uP1Z0UQXydMX940Ffqa6siHIOc9+ZzD72YvtbqPXiO63P5FVbYsg1w8tsss
 aA6vIHppJ3V3s1Fceq8Lr54C2zo6SSS31Afahlw+bRZhpZZcuzs=
 =dBut
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210323-pull-request' into staging

fixes for 6.0

# gpg: Signature made Tue 23 Mar 2021 15:36:06 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210323-pull-request:
  edid: prefer standard timings
  include/ui/console.h: Delete is_surface_bgr()
  qmp: add new qmp display-reload
  vnc: support reload x509 certificates for vnc
  crypto: add reload for QCryptoTLSCredsClass

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-23 23:47:30 +00:00
Markus Armbruster
bdabafc683 block: Remove monitor command block_passwd
Command block_passwd always fails since

Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) turned block_passwd into a stub that always fails, and
hardcoded encryption_key_missing to false in query-named-block-nodes
and query-block.

Commit ad1324e044 "block: remove 'encryption_key_missing' flag from
QAPI" just landed.  Complete the cleanup job: remove block_passwd.

Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323101951.3686029-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-23 22:31:56 +01:00
Markus Armbruster
407efbf9e7 qapi: Enforce enum member naming rules
Enum members should use '-', not '_'.  Enforce this.  Fix the fixable
offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-23 22:31:43 +01:00
Markus Armbruster
5aceeac04d qapi: Enforce struct member naming rules
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'.  Enforce this.  Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-23 22:31:43 +01:00
Markus Armbruster
05ebf841ef qapi: Enforce command naming rules
Command names should be lower-case.  Enforce this.  Fix the fixable
offenders (all in tests/), and add the remainder to pragma
command-name-exceptions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-23 22:31:05 +01:00
Markus Armbruster
b48a103304 qapi/pragma: Streamline comments on member-name-exceptions
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-21-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-23 22:31:05 +01:00
Markus Armbruster
b86df37478 qapi: Rename pragma *-whitelist to *-exceptions
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-23 22:31:05 +01:00
Markus Armbruster
7552cbe1d0 qapi/pragma: Tidy up after removal of deprecated commands
Commit cbde7be900 "migrate: remove QMP/HMP commands for speed,
downtime and cache size" neglected to remove query-migrate-cache-size
from pragma returns-whitelist.

Commit 8af54b9172 "machine: remove 'query-cpus' QMP command" neglected
to remove CpuInfo & friends from pragma name-case-exceptions.

Remove these now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2021-03-23 21:38:18 +01:00
Zihao Chang
9cc0765165 qmp: add new qmp display-reload
This patch provides a new qmp to reload display configuration
without restart VM, but only reloading the vnc tls certificates
is implemented.
Example:
{"execute": "display-reload", "arguments":{"type": "vnc", "tls-certs": true}}

Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Message-Id: <20210316075845.1476-4-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-23 08:48:21 +01:00
Markus Armbruster
dbb675c19a qapi: New -compat deprecated-input=crash
Policy "crash" calls abort() when deprecated input is received.

Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright.  Masking that seems unlikely.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
2021-03-19 16:05:11 +01:00
Markus Armbruster
db29164103 qapi: Implement deprecated-input=reject for QMP command arguments
This policy rejects deprecated input, and thus permits "testing the
future".  Implement it for QMP command arguments: reject commands with
deprecated ones.  Example: when QEMU is run with -compat
deprecated-input=reject, then

    {"execute": "eject", "arguments": {"device": "cd"}}

fails like this

    {"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}

When the deprecated parameter is removed, the error will change to

    {"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
2021-03-19 16:05:11 +01:00
Markus Armbruster
d2032598c4 qapi: Implement deprecated-input=reject for QMP commands
This policy rejects deprecated input, and thus permits "testing the
future".  Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then

    {"execute": "query-cpus"}

fails like this

    {"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}

When the deprecated command is removed, the error will change to

    {"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
2021-03-19 16:05:11 +01:00
Markus Armbruster
624fa80c8c monitor: Drop query-qmp-schema 'gen': false hack
QMP commands return their response as a generated QAPI type, which the
monitor core converts to JSON via QObject.

query-qmp-schema's response is the generated introspection data.  This
is a QLitObject since commit 7d0f982bfb "qapi: generate a literal
qobject for introspection", v2.12).  Before, it was a string.  Instead
of converting QLitObject / string -> QObject -> QAPI type
SchemaInfoList -> QObject -> JSON, we take a shortcut: the command is
'gen': false, so it can return the QObject instead of the QAPI type.
Slightly simpler and more efficient.

The next commit will filter the response for output policy, and this
is easier in the SchemaInfoList representation.  Drop the shortcut.

This replaces the manual command registration by a generated one.  The
manual registration makes the command available before the machine is
built by passing flag QCO_ALLOW_PRECONFIG.  To keep it available
there, we need need to add 'allow-preconfig': true to its definition
in the schema.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-7-armbru@redhat.com>
2021-03-19 16:05:09 +01:00
Markus Armbruster
91fa93e516 qapi: Implement deprecated-output=hide for QMP command results
This policy suppresses deprecated bits in output, and thus permits
"testing the future".  Implement it for QMP command results.  Example:
when QEMU is run with -compat deprecated-output=hide, then

    {"execute": "query-cpus-fast"}

yields

    {"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}

instead of

    {"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}

Note the suppression of deprecated member "arch".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
2021-03-19 15:43:33 +01:00
Markus Armbruster
6dd75472d5 qemu-options: New -compat to set policy for deprecated interfaces
New option -compat lets you configure what to do when deprecated
interfaces get used.  This is intended for testing users of the
management interfaces.  It is experimental.

-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received.  Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).

-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent.  Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).

Default is "accept".  Policies other than "accept" are implemented
later in this series.

For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'.  We may want to extend it to cover
semantic aspects, CLI, and experimental features.

Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options.  Tolerable, because it's meant for
testing.  If running with -compat fails, skip the test.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
2021-03-19 15:43:33 +01:00
Kevin Wolf
9151e59a8b qapi/qom: QAPIfy object-add
This converts object-add from 'gen': false to the ObjectOptions QAPI
type. As an immediate benefit, clients can now use QAPI schema
introspection for user creatable QOM objects.

It is also the first step towards making the QAPI schema the only
external interface for the creation of user creatable objects. Once all
other places (HMP and command lines of the system emulator and all
tools) go through QAPI, too, some object implementations can be
simplified because some checks (e.g. that mandatory options are set) are
already performed by QAPI, and in another step, QOM boilerplate code
could be generated from the schema.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:14 +01:00
Kevin Wolf
17422da082 qapi/qom: Add ObjectOptions for x-remote-object
This adds a QAPI schema for the properties of the x-remote-object
object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:14 +01:00
Kevin Wolf
30e863e5a7 qapi/qom: Add ObjectOptions for input-*
This adds a QAPI schema for the properties of the input-* objects.

ui.json cannot be included in qom.json because the storage daemon can't
use it, so move GrabToggleKeys to common.json.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:14 +01:00
Kevin Wolf
590466f056 qapi/qom: Add ObjectOptions for confidential-guest-support
This adds a QAPI schema for the properties of the objects implementing
the confidential-guest-support interface.

pef-guest and s390x-pv-guest don't have any properties, so they only
need to be added to the ObjectType enum without adding a new branch to
ObjectOptions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
b9e479d008 qapi/qom: Add ObjectOptions for pr-manager-helper
This adds a QAPI schema for the properties of the pr-manager-helper
object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
1156a67531 qapi/qom: Add ObjectOptions for filter-*
This adds a QAPI schema for the properties of the filter-* objects.

Some parts of the interface (in particular NetfilterProperties.position)
are very unusual for QAPI, but for now just describe the existing
interface.

net.json can't be included in qom.json because the storage daemon
doesn't have it. NetFilterDirection is still required in the new object
property definitions in qom.json, so move this enum to common.json.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
3d0d3c30ae qapi/qom: Add ObjectOptions for colo-compare
This adds a QAPI schema for the properties of the colo-compare object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
f3189b9135 qapi/qom: Add ObjectOptions for can-*
This adds a QAPI schema for the properties of the can-* objects.

can-bus doesn't have any properties, so it only needs to be added to the
ObjectType enum without adding a new branch to ObjectOptions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
d09e49374b qapi/qom: Add ObjectOptions for tls-*, deprecate 'loaded'
This adds a QAPI schema for the properties of the tls-* objects.

The 'loaded' property doesn't seem to make sense as an external
interface: It is automatically set to true in ucc->complete, and
explicitly setting it to true earlier just means that additional options
will be silently ignored.

In other words, the 'loaded' property is useless. Mark it as deprecated
in the schema from the start.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
39c4c27d37 qapi/qom: Add ObjectOptions for secret*, deprecate 'loaded'
This adds a QAPI schema for the properties of the secret* objects.

The 'loaded' property doesn't seem to make sense as an external
interface: It is automatically set to true in ucc->complete, and
explicitly setting it to true earlier just means that additional options
will be silently ignored.

In other words, the 'loaded' property is useless. Mark it as deprecated
in the schema from the start.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
381bd7440d qapi/qom: Add ObjectOptions for throttle-group
This adds a QAPI schema for the properties of the throttle-group object.

The only purpose of the x-* properties is to make the nested options in
'limits' available for a command line parser that doesn't support
structs. Any parser that will use the QAPI schema will supports structs,
though, so they will not be needed in the schema in the future.

To keep the conversion straightforward, add them to the schema anyway.
We can then remove the options and adjust documentation, test cases etc.
in a separate patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
6815bc1d03 qapi/qom: Add ObjectOptions for rng-*, deprecate 'opened'
This adds a QAPI schema for the properties of the rng-* objects.

The 'opened' property doesn't seem to make sense as an external
interface: It is automatically set to true in ucc->complete, and
explicitly setting it to true earlier just means that trying to set
additional options will result in an error. After the property has once
been set to true (i.e. when the object construction has completed), it
can never be reset to false. In other words, the 'opened' property is
useless. Mark it as deprecated in the schema from the start.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
913d9063e1 qapi/qom: Add ObjectOptions for memory-backend-*
This adds a QAPI schema for the properties of the memory-backend-*
objects.

HostMemPolicy has to be moved to an include file that can be used by the
storage daemon, too, because ObjectOptions must be the same in all
binaries if we don't want to compile the whole code multiple times.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
d7ef29c4ed qapi/qom: Add ObjectOptions for dbus-vmstate
This adds a QAPI schema for the properties of the dbus-vmstate object.

A list represented as a comma separated string is clearly not very
QAPI-like, but for now just describe the existing interface.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
a68d909ef9 qapi/qom: Add ObjectOptions for cryptodev-*
This adds a QAPI schema for the properties of the cryptodev-* objects.

These interfaces have some questionable aspects (cryptodev-backend is
really an abstract base class without function, and the queues option
only makes sense for cryptodev-vhost-user), but as the goal is to
represent the existing interface in QAPI, leave these things in place.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
8825587b53 qapi/qom: Add ObjectOptions for authz-*
This adds a QAPI schema for the properties of the authz-* objects.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
2273b2410f qapi/qom: Add ObjectOptions for iothread
Add an ObjectOptions union that will eventually describe the options of
all user creatable object types. As unions can't exist without any
branches, also add the first object type.

This adds a QAPI schema for the properties of the iothread object.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00
Kevin Wolf
5024340745 qapi/qom: Drop deprecated 'props' from object-add
The option has been deprecated in QEMU 5.0, remove it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:12 +01:00
Peter Maydell
1b507e55f8 Remove many old deprecated features
The following features have been deprecated for well over the 2
 release cycle we promise
 
   ``-drive file=json:{...{'driver':'file'}}`` (since 3.0)
   ``-vnc acl`` (since 4.0.0)
   ``-mon ...,control=readline,pretty=on|off`` (since 4.1)
   ``migrate_set_downtime`` and ``migrate_set_speed`` (since 2.8.0)
   ``query-named-block-nodes`` result ``encryption_key_missing`` (since 2.10.0)
   ``query-block`` result ``inserted.encryption_key_missing`` (since 2.10.0)
   ``migrate-set-cache-size`` and ``query-migrate-cache-size`` (since 2.11.0)
   ``query-named-block-nodes`` and ``query-block`` result dirty-bitmaps[i].status (since 4.0)
   ``query-cpus`` (since 2.12.0)
   ``query-cpus-fast`` ``arch`` output member (since 3.0.0)
   ``query-events`` (since 4.0)
   chardev client socket with ``wait`` option (since 4.0)
   ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0)
   ``ide-drive`` (since 4.2)
   ``scsi-disk`` (since 4.2)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmBTHBsACgkQvobrtBUQ
 T9/6cA//QVlWFvNJjmYuXMFOkYdokqde9W66iMO2vt+p3LSqlcxVa59+ZOcb5XWc
 7xYcZlDHEHRMe8DWrTwUyjftJ7Ild+/HY5Nz8NqDFvX08umIhC6qmzBSG64O3fU5
 KtSLWe+KfbUH2usmczQO1zGG8mSIAMnOdugpLln9W13v7X9NO4yC+/O36Mm8l4VK
 VEF+o9w7+s2l7QloLdhVe7RVOrqz6+9TFHx1+q1pPhMbzlv5vbfp9vIreiCgmqiO
 rPLXB4bjklktWSkJBe/2Jt7ixNQZrT0DfnCmshHJmmBxTCI1+b798Xy+7j9Dz8ER
 LzKHhlsilCv/jb8QKlIZSxvoDE02vAgwyVXlqxc7FdyaLmg/Emwr5LGUFHKCyhDR
 3hmJafNokdWPcHwBYwRTdbG1OlgKA+yHSBzQ4OnjsTsKrrzlBrm9B9DiDVABXadS
 5NnhvjZfaRmzjXZinf1th7fdMtLs4k+9XKn6szkrp2QhtlX9gyhkXuOhdwRVcyJB
 V/8dLZDdOB3Kpbu5DGlmmIzdHQx5bo/tQqZlvJJNmcOWe+TKwHg56WRUYQ3PFQZK
 M2A4XTd5kil6+PT7AnDHLoYAFdfScq6R32V38AI7S34kPrejftbSbDz8EVRXnrzj
 zzXGNWtSQpIDZGgNEg3Ta6aIf28TxLCA7nRhuPYIDcswlUsHn4c=
 =cFRH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/dep-many-pull-request' into staging

Remove many old deprecated features

The following features have been deprecated for well over the 2
release cycle we promise

  ``-drive file=json:{...{'driver':'file'}}`` (since 3.0)
  ``-vnc acl`` (since 4.0.0)
  ``-mon ...,control=readline,pretty=on|off`` (since 4.1)
  ``migrate_set_downtime`` and ``migrate_set_speed`` (since 2.8.0)
  ``query-named-block-nodes`` result ``encryption_key_missing`` (since 2.10.0)
  ``query-block`` result ``inserted.encryption_key_missing`` (since 2.10.0)
  ``migrate-set-cache-size`` and ``query-migrate-cache-size`` (since 2.11.0)
  ``query-named-block-nodes`` and ``query-block`` result dirty-bitmaps[i].status (since 4.0)
  ``query-cpus`` (since 2.12.0)
  ``query-cpus-fast`` ``arch`` output member (since 3.0.0)
  ``query-events`` (since 4.0)
  chardev client socket with ``wait`` option (since 4.0)
  ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0)
  ``ide-drive`` (since 4.2)
  ``scsi-disk`` (since 4.2)

# gpg: Signature made Thu 18 Mar 2021 09:23:39 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/dep-many-pull-request:
  block: remove support for using "file" driver with block/char devices
  block: remove 'dirty-bitmaps' field from 'BlockInfo' struct
  block: remove dirty bitmaps 'status' field
  block: remove 'encryption_key_missing' flag from QAPI
  hw/scsi: remove 'scsi-disk' device
  hw/ide: remove 'ide-drive' device
  chardev: reject use of 'wait' flag for socket client chardevs
  machine: remove 'arch' field from 'query-cpus-fast' QMP command
  machine: remove 'query-cpus' QMP command
  migrate: remove QMP/HMP commands for speed, downtime and cache size
  monitor: remove 'query-events' QMP command
  monitor: raise error when 'pretty' option is used with HMP
  ui, monitor: remove deprecated VNC ACL option and HMP commands

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-18 19:00:50 +00:00
Daniel P. Berrangé
e67d8e2928 block: remove 'dirty-bitmaps' field from 'BlockInfo' struct
The same data is available in the 'BlockDeviceInfo' struct.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
81cbfd5088 block: remove dirty bitmaps 'status' field
The same information is available via the 'recording' and 'busy' fields.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
ad1324e044 block: remove 'encryption_key_missing' flag from QAPI
This has been hardcoded to "false" since 2.10.0, since secrets required
to unlock block devices are now always provided up front instead of using
interactive prompts.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
445a5b4087 machine: remove 'arch' field from 'query-cpus-fast' QMP command
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
8af54b9172 machine: remove 'query-cpus' QMP command
The newer 'query-cpus-fast' command avoids side effects on the guest
execution. Note that some of the field names are different in the
'query-cpus-fast' command.

Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
cbde7be900 migrate: remove QMP/HMP commands for speed, downtime and cache size
The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Daniel P. Berrangé
8becb36063 monitor: remove 'query-events' QMP command
The code comment suggests removing QAPIEvent_(str|lookup) symbols too,
however, these are both auto-generated as standard for any enum in
QAPI. As such it they'll exist whether we use them or not.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Marc-André Lureau
c98939daec qga: return a more explicit error on why a command is disabled
qmp_disable_command() now takes an optional error string to return a
more explicit error message.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix up 80+ char line
Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-03-16 20:21:47 -05:00
Alexey Kirillov
a0724776c5 hmp: Use QAPI NetdevInfo in hmp_info_network
Replace usage of legacy field info_str of NetClientState for backend
network devices with QAPI NetdevInfo stored_config that already used
in QMP query-netdev.

This change increases the detail of the "info network" output and takes
a more general approach to composing the output.

NIC and hubports still use legacy info_str field.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15 16:41:22 +08:00
Alexey Kirillov
d32ad10a14 qapi: net: Add query-netdev command
The query-netdev command is used to get the configuration of the current
network device backends (netdevs).
This is the QMP analog of the HMP command "info network" but only for
netdevs (i.e. excluding NIC and hubports).

The query-netdev command returns an array of objects of the NetdevInfo
type, which are an extension of Netdev type. It means that response can
be used for netdev-add after small modification. This can be useful for
recreate the same netdev configuration.

Information about the network device is filled in when it is created or
modified and is available through the NetClientState->stored_config.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15 16:41:22 +08:00
Philippe Mathieu-Daudé
a0e61807a3 qapi: Remove QMP events and commands from user-mode builds
We removed the QMP loop in user-mode builds in commit 1935e0e4e0
("qapi/meson: Remove QMP from user-mode emulation"), now commands
and events code is unreachable.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210224171642.3242293-1-philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-03-05 15:40:49 +01:00
Paolo Bonzini
9d902d5115 chardev: do not use short form boolean options in non-QemuOpts character device descriptions
Options such as "-gdb" or "-serial" accept a part-QemuOpts part-parsed-by-hand
character device description.  Do not use short form boolean options in the
QemuOpts part.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25 15:41:53 +01:00
James Bottomley
f522cef9b3 sev: update sev-inject-launch-secret to make gpa optional
If the gpa isn't specified, it's value is extracted from the OVMF
properties table located below the reset vector (and if this doesn't
exist, an error is returned).  OVMF has defined the GUID for the SEV
secret area as 4c2eb361-7d9b-4cc3-8081-127c90d3d294 and the format of
the <data> is: <base>|<size> where both are uint32_t.  We extract
<base> and use it as the gpa for the injection.

Note: it is expected that the injected secret will also be GUID
described but since qemu can't interpret it, the format is left
undefined here.

Signed-off-by: James Bottomley <jejb@linux.ibm.com>

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-3-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-16 17:15:39 +01:00
Peter Krempa
6e9f21a2aa migration: dirty-bitmap: Allow control of bitmap persistence
Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.

This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12 15:24:36 -06:00
Peter Maydell
41d306ec7d * Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
 * initial attempt at fixing event_notifier emulation (Maxim)
 * i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
 * meson: RBD test fixes (myself)
 * meson: TCI warnings (Philippe)
 * Leaner build for --disable-guest-agent, --disable-system and
   --disable-tools (Philippe, Stefan)
 * --enable-tcg-interpreter fix (Richard)
 * i386: SVM feature bits (Wei)
 * KVM bugfix (Thomas H.)
 * Add missing MemoryRegionOps callbacks (PJP)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmAhR4cUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOviAf/Ymk/KwHZKySVqHOjDZnvP5PXMAru
 p1zlMRLAorXK+CTbshkIliaQyD8ggzT4HCinJ2NisdfTWMmlWbgr8gahNqKyZ5UG
 HlL28va3dvGhelswh/CNso1ZhVb2Q+aAYn/c6LXQva2r0xi26ohJTkIkSCPP/bnI
 +73dGzwAilBOsBVbn4cCm/70XtwDpPkw41IZIDoy/4lhL8ZdpHMz8oOjNIlOdlcU
 aEDfM8vYE4C70OtUlRZ1OwVxzcjS1Bf6dQYcpg5gAKy/jAAqR+v2PStxXiUuj5D3
 cAzd03Goh78Wcre+CbWxDKGcGtiooUT+J09wmvDPYVUHcpQMbumf4MufrQ==
 =INB5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
* initial attempt at fixing event_notifier emulation (Maxim)
* i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
* meson: RBD test fixes (myself)
* meson: TCI warnings (Philippe)
* Leaner build for --disable-guest-agent, --disable-system and
  --disable-tools (Philippe, Stefan)
* --enable-tcg-interpreter fix (Richard)
* i386: SVM feature bits (Wei)
* KVM bugfix (Thomas H.)
* Add missing MemoryRegionOps callbacks (PJP)

# gpg: Signature made Mon 08 Feb 2021 14:15:35 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (46 commits)
  target/i386: Expose VMX entry/exit load pkrs control bits
  target/i386: Add support for save/load IA32_PKRS MSR
  imx7-ccm: add digprog mmio write method
  tz-ppc: add dummy read/write methods
  spapr_pci: add spapr msi read method
  nvram: add nrf51_soc flash read method
  prep: add ppc-parity write method
  vfio: add quirk device write method
  pci-host: designware: add pcie-msi read method
  hw/pci-host: add pci-intack write method
  cpu-throttle: Remove timer_mod() from cpu_throttle_set()
  replay: rng-builtin support
  pc-bios/descriptors: fix paths in json files
  replay: fix replay of the interrupts
  accel/kvm/kvm-all: Fix wrong return code handling in dirty log code
  qapi/meson: Restrict UI module to system emulation and tools
  qapi/meson: Restrict system-mode specific modules
  qapi/meson: Remove QMP from user-mode emulation
  qapi/meson: Restrict qdev code to system-mode emulation
  meson: Restrict emulation code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-09 10:04:51 +00:00
Philippe Mathieu-Daudé
c2651c0eaa qapi/meson: Restrict UI module to system emulation and tools
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 14:43:55 +01:00
Philippe Mathieu-Daudé
7fdb383d04 qapi/meson: Restrict system-mode specific modules
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-12-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 14:43:55 +01:00
Philippe Mathieu-Daudé
1935e0e4e0 qapi/meson: Remove QMP from user-mode emulation
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 14:43:55 +01:00
Philippe Mathieu-Daudé
9b45a025ed qapi/meson: Restrict qdev code to system-mode emulation
Beside a CPU device, user-mode emulation doesn't access
anything else from qdev subsystem.

Tools don't need anything from qdev.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 14:43:55 +01:00
Daniel P. Berrangé
0f0d83a456 migration: introduce snapshot-{save, load, delete} QMP commands
savevm, loadvm and delvm are some of the few HMP commands that have never
been converted to use QMP. The reasons for the lack of conversion are
that they blocked execution of the event thread, and the semantics
around choice of disks were ill-defined.

Despite this downside, however, libvirt and applications using libvirt
have used these commands for as long as QMP has existed, via the
"human-monitor-command" passthrough command. IOW, while it is clearly
desirable to be able to fix the problems, they are not a blocker to
all real world usage.

Meanwhile there is a need for other features which involve adding new
parameters to the commands. This is possible with HMP passthrough, but
it provides no reliable way for apps to introspect features, so using
QAPI modelling is highly desirable.

This patch thus introduces new snapshot-{load,save,delete} commands to
QMP that are intended to replace the old HMP counterparts. The new
commands are given different names, because they will be using the new
QEMU job framework and thus will have diverging behaviour from the HMP
originals. It would thus be misleading to keep the same name.

While this design uses the generic job framework, the current impl is
still blocking. The intention that the blocking problem is fixed later.
None the less applications using these new commands should assume that
they are asynchronous and thus wait for the job status change event to
indicate completion.

In addition to using the job framework, the new commands require the
caller to be explicit about all the block device nodes used in the
snapshot operations, with no built-in default heuristics in use.

Note that the existing "query-named-block-nodes" can be used to query
what snapshots currently exist for block nodes.

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-13-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: removed tests for now, the output ordering isn't
deterministic
2021-02-08 11:19:52 +00:00
Dr. David Alan Gilbert
3af8554bd0 migration: Add blocker information
Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster
8b9407a09f migration: Clean up signed vs. unsigned XBZRLE cache-size
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) made the new parameter unsigned (QAPI type
'size', uint64_t in C).  It neglected to update existing code, which
continues to use int64_t.

migrate_xbzrle_cache_size() returns the new parameter.  Adjust its
return type.

QMP query-migrate-cache-size returns migrate_xbzrle_cache_size().
Adjust its return type.

migrate-set-parameters passes the new parameter to
xbzrle_cache_resize().  Adjust its parameter type.

xbzrle_cache_resize() passes it on to cache_init().  Adjust its
parameter type.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-3-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster
ec17de0ac0 migration: Fix migrate-set-parameters argument validation
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0)
switched MigrationParameters to narrower integer types, and removed
the simplified qmp_migrate_set_parameters()'s argument checking
accordingly.

Good idea, except qmp_migrate_set_parameters() takes
MigrateSetParameters, not MigrationParameters.  Its job is updating
migrate_get_current()->parameters (which *is* of type
MigrationParameters) according to its argument.  The integers now get
truncated silently.  Reproducer:

    ---> {'execute': 'query-migrate-parameters'}
    <--- {"return": {[...] "compress-threads": 8, [...]}}
    ---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}}
    <--- {"return": {}}
    ---> {'execute': 'query-migrate-parameters'}
    <--- {"return": {[...] "compress-threads": 1, [...]}}

Fix by resynchronizing MigrateSetParameters with MigrationParameters.

Fixes: 741d4086c8
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-2-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Andrey Gruzdev
6e8c25b4c6 migration: introduce 'background-snapshot' migration capability
Add new capability to 'qapi/migration.json' schema.
Update migrate_caps_check() to validate enabled capability set
against introduced one. Perform checks for required kernel features
and compatibility with guest memory backends.

Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Vladimir Sementsov-Ogievskiy
6a30f663d4 qapi: backup: disable copy_range by default
Further commit will add a benchmark
(scripts/simplebench/bench-backup.py), which will show that backup
works better with async parallel requests (previous commit) and
disabled copy_range. So, let's disable copy_range by default.

Note: the option was added several commits ago with default to true,
to follow old behavior (the feature was enabled unconditionally), and
only now we are going to change the default behavior.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-19-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Vladimir Sementsov-Ogievskiy
2c59fd833a qapi: backup: add max-chunk and max-workers to x-perf struct
Add new parameters to configure future backup features. The patch
doesn't introduce aio backup requests (so we actually have only one
worker) neither requests larger than one cluster. Still, formally we
satisfy these maximums anyway, so add the parameters now, to facilitate
further patch which will really change backup job behavior.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Vladimir Sementsov-Ogievskiy
86c6a3b690 qapi: backup: add perf.use-copy-range parameter
Experiments show, that copy_range is not always making things faster.
So, to make experimentation simpler, let's add a parameter. Some more
perf parameters will be added soon, so here is a new struct.

For now, add new backup qmp parameter with x- prefix for the following
reasons:

 - We are going to add more performance parameters, some will be
   related to the whole block-copy process, some only to background
   copying in backup (ignored for copy-before-write operations).
 - On the other hand, we are going to use block-copy interface in other
   block jobs, which will need performance options as well.. And it
   should be the same structure or at least somehow related.

So, there are too much unclean things about how the interface and now
we need the new options mostly for testing. Let's keep them
experimental for a while.

In do_backup_common() new x-perf parameter handled in a way to
make further options addition simpler.

We add use-copy-range with default=true, and we'll change the default
in further patch, after moving backup to use block-copy.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-2-vsementsov@virtuozzo.com>
[mreitz: s/5\.2/6.0/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Vladimir Sementsov-Ogievskiy
7f4a396d76 qapi: block-stream: add "bottom" argument
The code already don't freeze base node and we try to make it prepared
for the situation when base node is changed during the operation. In
other words, block-stream doesn't own base node.

Let's introduce a new interface which should replace the current one,
which will in better relations with the code. Specifying bottom node
instead of base, and requiring it to be non-filter gives us the
following benefits:

 - drop difference between above_base and base_overlay, which will be
   renamed to just bottom, when old interface dropped

 - clean way to work with parallel streams/commits on the same backing
   chain, which otherwise become a problem when we introduce a filter
   for stream job

 - cleaner interface. Nobody will surprised the fact that base node may
   disappear during block-stream, when there is no word about "base" in
   the interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216061703.70908-11-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Andrey Shinkevich
e4c8fddde7 qapi: copy-on-read filter: add 'bottom' option
Add an option to limit copy-on-read operations to specified sub-chain
of backing-chain, to make copy-on-read filter useful for block-stream
job.

Suggested-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
  [vsementsov: change subject, modified to freeze the chain,
   do some fixes]
Message-Id: <20201216061703.70908-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 11:26:54 +01:00
Andrey Shinkevich
880747a887 qapi: add filter-node-name to block-stream
Provide the possibility to pass the 'filter-node-name' parameter to the
block-stream job as it is done for the commit block job.

Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
  [vsementsov: comment indentation, s/Since: 5.2/Since: 6.0/]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201216061703.70908-5-vsementsov@virtuozzo.com>
[mreitz: s/commit/stream/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 11:26:54 +01:00
Paolo Bonzini
0afec75734 qmp: remove deprecated "change" command
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210120144235.345983-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23 15:55:07 -05:00
Paolo Bonzini
c27025e044 runstate: cleanup reboot and panic actions
The possible choices for panic, reset and watchdog actions are inconsistent.

"-action panic=poweroff" should be renamed to "-action panic=shutdown"
on the command line.  This is because "-action panic=poweroff" and
"-action watchdog=poweroff" have slightly different semantics, the first
does an unorderly exit while the second goes through qemu_cleanup().  With
this change, -no-shutdown would not have to change "-action panic=pause"
"pause", just like it does not have to change the reset action.

"-action reboot=none" should be renamed to "-action reboot=reset".
This should be self explanatory, since for example "-action panic=none"
lets the guest proceed without taking any action.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-21 13:00:41 +01:00
Volker Rümelin
5a0926c23f sdlaudio: add -audiodev sdl,out.buffer-count option
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.

Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.

The in.buffer-count option will be used with one of the next
patches.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-01-15 11:25:22 +01:00
Lukas Straub
50186051f4 Introduce yank feature
The yank feature allows to recover from hanging qemu by "yanking"
at various parts. Other qemu systems can register themselves and
multiple yank functions. Then all yank functions for selected
instances can be called by the 'yank' out-of-band qmp command.
Available instances can be queried by a 'query-yank' oob command.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <69934ceacfd33a7dfe53db145ecc630ad39ee47c.1609167865.git.lukasstraub2@web.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-13 10:21:17 +01:00
Peter Maydell
1f7c02797f QAPI patches patches for 2020-12-19
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl/dynUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZT3igP/3bWwsKR5vKVsDUTmMfrhcgaFvQiaYoG
 F29Bond8Xy0Zd0gl7OWh/5jKL0vGlrEVPrKfYLUjMnfkeRec/pOkIB2oOmIxpnPs
 9zi4kh2hQ3dEoRBuvSnnZzedetYPTuCpWMIjlztkgfxgcimqm8TPNVSxRaSApjC3
 Y8108wGwBWVf2C0rhKO9E2xA51uo6khy05i1psUtqUlC+PuDQ/OwzQHM2dnWdDB6
 kUwBDK17nhL6WwsYqCyKLSiDModReYfDiY8GS5MDLo74dzwXiatEefCR7+sbM4xq
 eX/SBoqoeS1jLPNuCryNeGNKvNA2KAbEJTnbQA2NxBXHgZ9/1SxVZFxuPp4nDMSQ
 N7BDuDI8YtJE479RjT/ZzRG65xadGBSe/HXkXM9mZwh1zitop8SVZ9fArFBHvNzw
 Y5zAv3fQd54+87psffg4dYFK0wGmqTabLEEuVzM8KIVqcAdYA2yC2b2EHy+vsxuq
 GMkr0WaA6Sq2gthXmzdTjmUPuHdan/NIhuV6d66SbPNH2oH31piptFxuznyFWSKV
 isciFFdUrkg5QrF8DSt2nmdwMFf8QGbszqP8QIGMzhJCCS9GXIiGG8f149++q8X8
 HO1lFAdLQJdrDwCYmfx36tOvi2rS/rcoTGgvg66UX3xKko1ruoxR1ZWcS54obJN6
 vEQDZ+PxubDg
 =vGLy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging

QAPI patches patches for 2020-12-19

# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
  qobject: Make QString immutable
  block: Use GString instead of QString to build filenames
  keyval: Use GString to accumulate value strings
  json: Use GString instead of QString to accumulate strings
  migration: Replace migration's JSON writer by the general one
  qobject: Factor JSON writer out of qobject_to_json()
  qobject: Factor quoted_str() out of to_json()
  qobject: Drop qstring_get_try_str()
  qobject: Drop qobject_get_try_str()
  Revert "qobject: let object_property_get_str() use new API"
  block: Avoid qobject_get_try_str()
  qmp: Fix tracing of non-string command IDs
  qobject: Move internals to qobject-internal.h
  hw/rdma: Replace QList by GQueue
  Revert "qstring: add qstring_free()"
  qobject: Change qobject_to_json()'s value to GString
  qobject: Use GString instead of QString to accumulate JSON
  qobject: Make qobject_to_json_pretty() take a pretty argument
  monitor: Use GString instead of QString for output buffer
  hmp: Simplify how qmp_human_monitor_command() gets output
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-01 14:33:03 +00:00
Markus Armbruster
54addb01d8 string-output-visitor: Fix to use sufficient precision
The string output visitor should serialize numbers so that the string
input visitor deserializes them back to the same number.  It fails to
do so.

print_type_number() uses format %f.  This is prone to nasty rounding
errors.  For instance, numbers between 0 and 0.0000005 get flushed to
zero.

We currently use this visitor only for HMP info migrate, info network,
info qtree, and info memdev.  No double values occur there as far as I
can tell.

Fix anyway by formatting with %.17g.  17 decimal digits always suffice
for IEEE double.

See also recent commit "qobject: Fix qnum_to_string() to use
sufficient precision".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-9-armbru@redhat.com>
2020-12-19 10:37:16 +01:00
Vladimir Sementsov-Ogievskiy
33fa2222eb block: introduce preallocate filter
It's intended to be inserted between format and protocol nodes to
preallocate additional space (expanding protocol file) on writes
crossing EOF. It improves performance for file-systems with slow
allocation.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-9-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Two comment fixes, and bumped the version from 5.2 to 6.0]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-12-18 12:35:55 +01:00
Alejandro Jimenez
c753e8e725 vl: Add option to avoid stopping VM upon guest panic
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/

However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.

Add an option to avoid stopping a VM after a panic event is received,
by passing:

-action panic=none

in the command line arguments, or during runtime by using an upcoming
QMP command.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:58 -05:00
Alejandro Jimenez
e6dba04813 qmp: generalize watchdog-set-action to -no-reboot/-no-shutdown
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.

Example:

-> { "execute": "set-action",
     "arguments": {
	"reboot": "none",
	"shutdown": "poweroff",
	"watchdog": "debug" } }
<- { "return": {} }

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Paolo Bonzini
ebe3444468 monitor: allow quitting while in preconfig state
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Paolo Bonzini
164dafd174 remove preconfig state
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be.  However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug.  Use it instead of a separate runstate.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:48 -05:00
Max Reitz
4fba06d594 fuse: Allow growable exports
These will behave more like normal files in that writes beyond the EOF
will automatically grow the export size.

As an optimization, keep the RESIZE permission for growable exports so
we do not have to take it for every post-EOF write.  (This permission is
not released when the export is destroyed, because at that point the
BlockBackend is destroyed altogether anyway.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:40 +01:00
Max Reitz
0c9b70d590 fuse: Allow exporting BDSs via FUSE
block-export-add type=fuse allows mounting block graph nodes via FUSE on
some existing regular file.  That file should then appears like a raw
disk image, and accesses to it result in accesses to the exported BDS.

Right now, we only implement the necessary block export functions to set
it up and shut it down.  We do not implement any access functions, so
accessing the mount point only results in errors.  This will be
addressed by a followup patch.

We keep a hash table of exported mount points, because we want to be
able to detect when users try to use a mount point twice.  This is
because we invoke stat() to check whether the given mount point is a
regular file, but if that file is served by ourselves (because it is
already used as a mount point), then this stat() would have to be served
by ourselves, too, which is impossible to do while we (as the caller)
are waiting for it to settle.  Therefore, keep track of mount point
paths to at least catch the most obvious instances of that problem.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:39 +01:00
Tobin Feldman-Fitzthum
c7f7e6970d sev: add sev-inject-launch-secret
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.

Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10 17:33:17 -05:00
Markus Armbruster
9bc6e893b7 qapi: Normalize version references x.y.0 to just x.y
We use x.y most of the time, and x.y.0 sometimes.  Normalize for
consistency.

Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201118064158.3359056-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-12-10 17:16:44 +01:00
Kevin Wolf
6deb20f668 char-stdio: Fix QMP default for 'signal'
Commit 02c4bdf1 tried to make signal=on the default for stdio chardevs
except for '-serial mon:stdio', but it forgot about QMP and accidentally
switched the QMP default from true (except for -nographic) to false
(always). The documentation was kept unchanged and still describes the
opposite of the old behaviour (which is an even older documentation
bug).

Fix all of this by making signal=true the default in ChardevStdio and
documenting it as such.

Fixes: 02c4bdf1d2
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201023101222.250147-2-kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-11-17 12:26:47 +01:00
Markus Armbruster
143d51e179 block: Remove unused BlockDeviceMapEntry
BlockDeviceMapEntry has never been used.  It was added in commit
facd6e2 "so that it is published through the introspection mechanism."
What exactly introspecting types that aren't used for anything could
accomplish isn't clear.  What "introspection mechanism" to use is also
nebulous.  To the best of my knowledge, there has never been one that
covered this type.  Certainly not query-qmp-schema, which includes
only types that are actually used in QMP.

Not being able to introspect BlockDeviceMapEntry hasn't bothered
anyone enough to complain in almost four years.  Get rid of it.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201104165513.72720-3-mreitz@redhat.com>
2020-11-09 09:14:21 +01:00
Max Reitz
ffb515fa50 qapi/block-core: Improve MapEntry documentation
MapEntry and BlockDeviceMapEntry are kind of the same thing, and the
latter is not used, so we want to remove it.  However, the documentation
it provides for some fields is better than that of MapEntry, so steal
some of it for the latter.

(And adjust them a bit in the process, because I feel like we can make
them even clearer.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201104165513.72720-2-mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-11-09 09:14:20 +01:00
Markus Armbruster
a1d12a2148 qapi: Fix missing headers in QMP Reference Manual
Audio stuff is under "Miscellanea", and authorization stuff is under
"Input".  Add suitable header doc comments to correct that.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201102081550.171061-3-armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-09 09:14:17 +01:00
Peter Maydell
747c6b3811 Doc and bug fixes
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+i3mkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNzSQf/WGDQnxXMt7gNVzWUyc8uest2qLGU
 OvJlbUJfVg7nbU+9FXP75sL5+KogwyU9znSZ9Jziib9PstRPNA32Wjhariv9fMls
 wed6c0yxyRN7ZNvis/CxMLQmctMuFZX9hILUGUVgq8uq7tNvA02nStb1sBwCywNO
 bkjR+ZgKRCh141EI/6GJ0JGbJ4gTEike26ss4pRXxHbDYQO9mw2vIRCw+DpRsoBY
 0QrT1IWwh9f7/Sm5a2kOfiRFTP2fmv4Y5udKLDzzkV3oLSMjlSvtn899MSdZ6Jv1
 tFAZnq7BxeaQgj/5a9lESRt+SmegdPUTYJh6V4UWRzEOZeFQcOT/qy2gXQ==
 =zGsk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Doc and bug fixes

# gpg: Signature made Wed 04 Nov 2020 17:01:29 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  qapi, qemu-options: make all parsing visitors parse boolean options the same
  qtest: escape device name in device-introspect-test
  ivshmem-test: do not use short-form boolean option
  semihosting: fix order of initialization functions
  fuzz: fuzz offsets within pio/mmio regions
  fuzz: check the MR in the DMA callback
  fuzz: fix writing DMA patterns
  tests/qtest: Fix potential NULL pointer dereference in qos_build_main_args()
  configure: fix gio_libs reference
  meson: fix warning for bad sphinx-build
  tests/qtest/libqos/ahci.c: Avoid NULL dereference in ahci_exec()
  tests/qtest/libqtest.c: Check for setsockopt() failure
  meson: vhost-user-gpu/virtiofsd: use absolute path
  meson: use b_staticpic=false for meson >=0.56.0
  qtest: add a reproducer for LP#1878642
  hw/isa/lpc_ich9: Ignore reserved/invalid SCI IRQ
  scripts/oss-fuzz: rename bin/qemu-fuzz-i386
  exec: Remove dead code (CID 1432876)
  docs: expand sourceset documentation
  cutils: replace strdup with g_strdup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-05 13:30:05 +00:00
Paolo Bonzini
372bcb2585 qapi, qemu-options: make all parsing visitors parse boolean options the same
OptsVisitor, StringInputVisitor and the keyval visitor have
three different ideas of how a human could write the value of
a boolean option.  Pay homage to the backwards-compatibility
gods and make the new common helper accept all four sets (on/off,
true/false, y/n and yes/no), but remove case-insensitivity.

Since OptsVisitor is supposed to match qemu-options, adjust
it as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201103161339.447118-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-04 12:00:40 -05:00
Marc-André Lureau
0d9b90ce5c console: make QMP/HMP screendump run in coroutine
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.

The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-04 08:02:25 +01:00
Markus Armbruster
8acefc79de sockets: Make abstract UnixSocketAddress depend on CONFIG_LINUX
The abstract socket namespace is a non-portable Linux extension.  An
attempt to use it elsewhere should fail with ENOENT (the abstract
address looks like a "" pathname, which does not resolve).  We report
this failure like

    Failed to connect socket abc: No such file or directory

Tolerable, although ENOTSUP would be better.

However, introspection lies: it has @abstract regardless of host
support.  Easy enough to fix: since Linux provides them since 2.2,
'if': 'defined(CONFIG_LINUX)' should do.

The above failure becomes

    Parameter 'backend.data.addr.data.abstract' is unexpected

I consider this an improvement.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-11-03 13:17:25 +00:00
Peter Maydell
2c6605389c VFIO update 2020-11-01
* Migration support (Kirti Wankhede)
  * s390 DMA limiting (Matthew Rosato)
  * zPCI hardware info (Matthew Rosato)
  * Lock guard (Amey Narkhede)
  * Print fixes (Zhengui li)
  * Warning/build fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJfnxyyAAoJECObm247sIsi5lUP/AvsTnmg56sT0vPjFNGpsdpo
 K6VkClOpT92WEZmY4EjoA2yCJYQXwuokr2m2ZnbwAMq40Z4wfitjJYe8X9VsUJ4p
 l5fsLtxAbTA3rZH505HhTLHnexy8LloG8Nx101NPCges+oRZP5Wx95GfcuwnB3b/
 68SU4L0e22n38vTvYwdIX7ACCp2akkSfDp22v++V5XrnRdZi8NOySmRYdxjYE2SX
 V8UpqIi/qJzdVrP6DD8MJXWegJzL6EWOjw1yh3ntbBj9TYkiZlK4AjiWT95ccE8u
 xUbXFpyTTQUAY/wKnAl7K5KCi7dwyUDv3ZvKTE0ognI/IkYAIuwEOkUwqW8Ypt9o
 kJV8EQkLNTl63MKvHqtC/CN2Ru2VAacgs3h9b8EezJhuB29f5RMy54KzVXTL/nU/
 NOMxG9hvDisUdkMN/b8nVv0T6mSYPoZnILPoMp7HiPW28kG637DUV7PlN4NoM1zi
 yT8YAFOoUyLoZc4vE67zvTLcVlX6iVgnhRqvWkH+fzoxdaCaQRrrrioolWq0AvAW
 Lsb8JJSSEbVXQiafuraDgXxyeR/OZ58o8DPq2+eOeNnBCviAcbF40wDkEYGPpJma
 bXNqPPx5L/hrnH0e80jAxhoBnF3VRkDEyvAYKo9IGEkZLz2baUG0hov6F+Sw47oN
 TuIsstsLwbRuKlRmznSF
 =5Xrr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20201101.0' into staging

VFIO update 2020-11-01

 * Migration support (Kirti Wankhede)
 * s390 DMA limiting (Matthew Rosato)
 * zPCI hardware info (Matthew Rosato)
 * Lock guard (Amey Narkhede)
 * Print fixes (Zhengui li)
 * Warning/build fixes

# gpg: Signature made Sun 01 Nov 2020 20:38:10 GMT
# gpg:                using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-update-20201101.0: (32 commits)
  vfio: fix incorrect print type
  hw/vfio: Use lock guard macros
  s390x/pci: get zPCI function info from host
  vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilities
  s390x/pci: use a PCI Function structure
  s390x/pci: clean up s390 PCI groups
  s390x/pci: use a PCI Group structure
  s390x/pci: create a header dedicated to PCI CLP
  s390x/pci: Honor DMA limits set by vfio
  s390x/pci: Add routine to get the vfio dma available count
  vfio: Find DMA available capability
  vfio: Create shared routine for scanning info capabilities
  s390x/pci: Move header files to include/hw/s390x
  linux-headers: update against 5.10-rc1
  update-linux-headers: Add vfio_zdev.h
  qapi: Add VFIO devices migration stats in Migration stats
  vfio: Make vfio-pci device migration capable
  vfio: Add ioctl to get dirty pages bitmap during dma unmap
  vfio: Dirty page tracking when vIOMMU is enabled
  vfio: Add vfio_listener_log_sync to mark dirty pages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 09:54:00 +00:00
Kirti Wankhede
3710586caa qapi: Add VFIO devices migration stats in Migration stats
Added amount of bytes transferred to the VM at destination by all VFIO
devices

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01 12:30:51 -07:00
Eric Blake
dbc7b01492 nbd: Add 'qemu-nbd -A' to expose allocation depth
Allow the server to expose an additional metacontext to be requested
by savvy clients.  qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.

qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):

unallocated (depth 0) => "zero":false, "data":true
local (depth 1)       => "zero":false, "data":false
backing (depth 2+)    => "zero":true,  "data":true

libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-10-30 15:22:00 -05:00
Eric Blake
cbad81cef8 nbd: Update qapi to support exporting multiple bitmaps
Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'.  This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.

Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-10-30 15:10:15 -05:00
Stefan Hajnoczi
d9b495f9c6 block/export: add vhost-user-blk multi-queue support
Allow the number of queues to be configured using --export
vhost-user-blk,num-queues=N. This setting should match the QEMU --device
vhost-user-blk-pci,num-queues=N setting but QEMU vhost-user-blk.c lowers
its own value if the vhost-user-blk backend offers fewer queues than
QEMU.

The vhost-user-blk-server.c code is already capable of multi-queue. All
virtqueue processing runs in the same AioContext. No new locking is
needed.

Add the num-queues=N option and set the VIRTIO_BLK_F_MQ feature bit.
Note that the feature bit only announces the presence of the num_queues
configuration space field. It does not promise that there is more than 1
virtqueue, so we can set it unconditionally.

I tested multi-queue by running a random read fio test with numjobs=4 on
an -smp 4 guest. After the benchmark finished the guest /proc/interrupts
file showed activity on all 4 virtio-blk MSI-X. The /sys/block/vda/mq/
directory shows that Linux blk-mq has 4 queues configured.

An automated test is included in the next commit.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201001144604.559733-2-stefanha@redhat.com
[Fixed accidental tab characters as suggested by Markus Armbruster
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-10-23 13:42:16 +01:00
Stefan Hajnoczi
f51d23c80a block/export: add iothread and fixed-iothread options
Make it possible to specify the iothread where the export will run. By
default the block node can be moved to other AioContexts later and the
export will follow. The fixed-iothread option forces strict behavior
that prevents changing AioContext while the export is active. See the
QAPI docs for details.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200929125516.186715-5-stefanha@redhat.com
[Fix stray '#' character in block-export.json and add missing "(since:
5.2)" as suggested by Eric Blake.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-10-23 13:42:16 +01:00
Stefan Hajnoczi
90fc91d50b block/export: convert vhost-user-blk server to block export API
Use the new QAPI block exports API instead of defining our own QOM
objects.

This is a large change because the lifecycle of VuBlockDev needs to
follow BlockExportDriver. QOM properties are replaced by QAPI options
objects.

VuBlockDev is renamed VuBlkExport and contains a BlockExport field.
Several fields can be dropped since BlockExport already has equivalents.

The file names and meson build integration will be adjusted in a future
patch. libvhost-user should probably be built as a static library that
is linked into QEMU instead of as a .c file that results in duplicate
compilation.

The new command-line syntax is:

  $ qemu-storage-daemon \
      --blockdev file,node-name=drive0,filename=test.img \
      --export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock

Note that unix-socket is optional because we may wish to accept chardevs
too in the future.

Markus noted that supported address families are not explicit in the
QAPI schema. It is unlikely that support for more address families will
be added since file descriptor passing is required and few address
families support it. If a new address family needs to be added, then the
QAPI 'features' syntax can be used to advertize them.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200924151549.913737-12-stefanha@redhat.com
[Skip test on big-endian host architectures because this device doesn't
support them yet (as already mentioned in a code comment).
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-10-23 13:42:16 +01:00
Philippe Mathieu-Daudé
f25e7ab2b0 block/nvme: Add driver statistics for access alignment and hw errors
Keep statistics of some hardware errors, and number of
aligned/unaligned I/O accesses.

QMP example booting a full RHEL 8.3 aarch64 guest:

{ "execute": "query-blockstats" }
{
    "return": [
        {
            "device": "",
            "node-name": "drive0",
            "stats": {
                "flush_total_time_ns": 6026948,
                "wr_highest_offset": 3383991230464,
                "wr_total_time_ns": 807450995,
                "failed_wr_operations": 0,
                "failed_rd_operations": 0,
                "wr_merged": 3,
                "wr_bytes": 50133504,
                "failed_unmap_operations": 0,
                "failed_flush_operations": 0,
                "account_invalid": false,
                "rd_total_time_ns": 1846979900,
                "flush_operations": 130,
                "wr_operations": 659,
                "rd_merged": 1192,
                "rd_bytes": 218244096,
                "account_failed": false,
                "idle_time_ns": 2678641497,
                "rd_operations": 7406,
            },
            "driver-specific": {
                "driver": "nvme",
                "completion-errors": 0,
                "unaligned-accesses": 2959,
                "aligned-accesses": 4477
            },
            "qdev": "/machine/peripheral-anon/device[0]/virtio-backend"
        }
    ]
}

Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201001162939.1567915-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-10-23 13:42:16 +01:00
Philippe Mathieu-Daudé
28af9ba260 qapi: Restrict Xen migration commands to migration.json
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-21 05:00:44 +02:00
Philippe Mathieu-Daudé
81dddc1bb6 qapi: Restrict 'query-kvm' command to machine code
Restricting query-kvm to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-5-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-21 05:00:44 +02:00
Philippe Mathieu-Daudé
d4130cbfc6 qapi: Restrict '(p)memsave' command to machine code
Restricting memsave/pmemsave to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-4-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-21 05:00:44 +02:00
Philippe Mathieu-Daudé
90f8c0f947 qapi: Restrict 'system wakeup/reset/powerdown' commands to machine.json
Restricting system_wakeup/system_reset/system_powerdown to
machine.json pulls slightly less QAPI-generated code into
user-mode and tools.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-3-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-21 05:00:44 +02:00
Philippe Mathieu-Daudé
df7a1f4853 qapi: Restrict 'inject-nmi' command to machine code
Restricting 'inject-nmi' to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-2-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-21 05:00:44 +02:00
Peter Maydell
e12ce85b2c x86 queue, 2020-10-15
Cleanups:
 * Drop x86_cpu_get_supported_feature_word() forward declaration
   (Vitaly Kuznetsov)
 * Delete kvm_allows_irq0_override() (Eduardo Habkost)
 * Correct documentation of kvm_irqchip_*() (Eduardo Habkost)
 * Fix FEATURE_HYPERV_EDX value in hyperv_passthrough case (Zhenyu Wang)
 
 Deprecation:
 * CPU model deprecation API (Robert Hoo)
 * Mark Icelake-Client CPU models deprecated (Robert Hoo)
 
 Bug fixes:
 * Remove core_id assert check in CPUID 0x8000001E (Babu Moger)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl+IfE4UHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaYkIA//dVNEz2Xq/NHqE/jZIpd27RdiI+jM
 20iPDPMecPD0SZRKZWrl95+XYri7WhQafYuxDb2g0fnb1lGaxt1BEzE4guoVjide
 hj36Qe1dkZZVmUIQ02FKp1yh2L8Rj5dXkgIcW1i19KOjYNFVhQ0TvXbhj/gL52bm
 0CMji3gDwwSdKJ7xfB1/psEeQxNnhIsPuICGVdanuehts0MoUMXxJRGR7WxNL+eF
 zDkS0GhAfFvdK+TjJMbuWTlKytoQhK+82tKXXpD2Vkg0lbgufsykunVldHenVxdR
 WVKvkYRrf2haYbhehMQHZlq/Pc5WE0d48zvPlQmS3FDvD8JgGP/CIcYZkdqUr73n
 dyD0yxhqXlorJGzUMgT1goJYGpCsvYH+LwCRPk5uvQlLUTAv05ZMf5odTROkTtZg
 7tdhi88cR2qdeokFYv7sn8lb7kTbhqkTDCrOvmBmD7T0v6nuex2WWpm9mJmgmPaw
 9JKS3g1g75yGXTVKLmv1PLI1m6/kBuGcp5WTiQmKtBEJ2Oapf4GhuDNSvNNGUKQI
 2k/tED3TI7381Sk/Idpke+U4xzyE8T+YX/4t10Kb7fCCEox7lNk9/+7YxEXC2Rq4
 vqgQoVhVoVac260rNMfZe7aMkPt7DV55JvKIywZcOrTBAOvn+eL6KP+Q69Lo0okH
 zCba5MqfpRi2LDs=
 =wYbS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2020-10-15

Cleanups:
* Drop x86_cpu_get_supported_feature_word() forward declaration
  (Vitaly Kuznetsov)
* Delete kvm_allows_irq0_override() (Eduardo Habkost)
* Correct documentation of kvm_irqchip_*() (Eduardo Habkost)
* Fix FEATURE_HYPERV_EDX value in hyperv_passthrough case (Zhenyu Wang)

Deprecation:
* CPU model deprecation API (Robert Hoo)
* Mark Icelake-Client CPU models deprecated (Robert Hoo)

Bug fixes:
* Remove core_id assert check in CPUID 0x8000001E (Babu Moger)

# gpg: Signature made Thu 15 Oct 2020 17:43:58 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  i386: Mark Icelake-Client CPU models deprecated
  cpu: Introduce CPU model deprecation API
  kvm: Correct documentation of kvm_irqchip_*()
  i386/kvm: Delete kvm_allows_irq0_override()
  i386/kvm: Remove IRQ routing support checks
  i386/kvm: Require KVM_CAP_IRQ_ROUTING
  target/i386: Remove core_id assert check in CPUID 0x8000001E
  i386/kvm: fix FEATURE_HYPERV_EDX value in hyperv_passthrough case
  i386: drop x86_cpu_get_supported_feature_word() forward declaration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-16 22:46:28 +01:00
Kevin Wolf
8bf12c4f75 keyval: Parse help options
This adds a special meaning for 'help' and '?' as options to the keyval
parser. Instead of being an error (because of a missing value) or a
value for an implied key, they now request help, which is a new boolean
output of the parser in addition to the QDict.

A new parameter 'p_help' is added to keyval_parse() that contains on
return whether help was requested. If NULL is passed, requesting help
results in an error and all other cases work like before.

Turning previous error cases into help is a compatible extension. The
behaviour potentially changes for implied keys: They could previously
get 'help' as their value, which is now interpreted as requesting help.

This is not a problem in practice because 'help' and '?' are not a valid
values for the implied key of any option parsed with keyval_parse():

* audiodev: union Audiodev, implied key "driver" is enum AudiodevDriver,
  "help" and "?" are not among its values

* display: union DisplayOptions, implied key "type" is enum
  DisplayType, "help" and "?" are not among its values

* blockdev: union BlockdevOptions, implied key "driver is enum
  BlockdevDriver, "help" and "?" are not among its values

* export: union BlockExport, implied key "type" is enum BlockExportType,
  "help" and "?" are not among its values

* monitor: struct MonitorOptions, implied key "mode" is enum MonitorMode,
  "help" and "?" are not among its values

* nbd-server: struct NbdServerOptions, no implied key.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-15 16:06:27 +02:00
Robert Hoo
61ad65d0f0 cpu: Introduce CPU model deprecation API
Implement the ability of marking some versions deprecated. When
that CPU model is chosen, print a warning.  The warning message
can be customized, e.g. suggesting an alternative CPU model to be
used instead.

The deprecation message will be printed by x86_cpu_list_entry(),
e.g. '-cpu help'.

QMP command 'query-cpu-definitions' will return a bool value
indicating the deprecation status.

Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword commit message]
[ehabkost: Handle NULL cpu_type]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-10-14 15:28:54 -04:00
Chuan Zheng
b1a859cfb0 migration/dirtyrate: present dirty rate only when querying the rate has completed
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-12 12:39:38 +01:00
Kevin Wolf
eb94b81a94 block: Convert 'block_resize' to coroutine
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.

bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.

Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
9ce44e2ce2 qmp: Move dispatcher to a coroutine
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.

For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
e69ee454b5 monitor: Make current monitor a per-coroutine property
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().

This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine.  Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.

Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
41725fa7ed qmp: Call monitor_set_cur() only in qmp_dispatch()
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Pavel Dovgalyuk
f6baed3d14 replay: implement replay-seek command
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - fixed HMP command description indent
 - removed useless error_free call
Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk
e751067179 replay: introduce breakpoint at the specified step
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk
e3b09ad2b6 replay: introduce info hmp/qmp command
This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions).  The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk
43d7e1d782 qapi: introduce replay.json for record/replay-related stuff
This patch adds replay.json file. It will be
used for adding record/replay-related data structures and commands.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174519444.12451.3472949430004845434.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk
b39847a505 migration: introduce icount field for snapshots
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>

--

v4 changes:
 - squashed format update with test output update
v7 changes:
 - introduced the spaces between the fields in snapshot info output
 - updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
zhenwei pi
77b285f7f6 qapi/run-state.json: introduce memory failure event
Introduce memory failure events for hypervisor and guest. This lets
mft: Need exactly one file argument.  Try `mft --help' for more
information.

Suggested by Peter Maydell, rename events name&description to make
them architecture-neutral; and suggested by Paolo, add more info to
distinguish a mce is AR/AO, and if a previous MCE was still being
processed in the guest.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-04 18:36:23 +02:00
Kevin Wolf
443127e81b nbd: Deprecate nbd-server-add/remove
These QMP commands are replaced by block-export-add/del.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-28-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
30dbc81d31 block/export: Move writable to BlockExportOptions
The 'writable' option is a basic option that will probably be applicable
to most if not all export types that we will implement. Move it from NBD
to the generic BlockExport layer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-26-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
8cade320c8 block/export: Add query-block-exports
This adds a simple QMP command to query the list of block exports.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-25-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
1a9f7a804f block/export: Add BLOCK_EXPORT_DELETED event
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
3c3bc462ad block/export: Add block-export-del
Implement a new QMP command block-export-del and make nbd-server-remove
a wrapper around it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
d53be9ce55 block/export: Add 'id' option to block-export-add
We'll need an id to identify block exports in monitor commands. This
adds one.

Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
b6076afcab block/export: Add node-name to BlockExportOptions
Every block export needs a block node to export, so add a 'node-name'
option to BlockExportOptions and remove the replaced option 'device'
from BlockExportOptionsNbd.

To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs
to be wrapped by a new type NbdServerAddOptions that adds 'device' back
because nbd-server-add doesn't use the BlockExportOptions base type at
all (so even without changing it to a 'node-name' option in
block-export-add, this compatibility code would be necessary).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
fefee85da0 nbd: Add writethrough to block-export-add
qemu-nbd allows use of writethrough cache modes, which mean that write
requests made through NBD will cause a flush before they complete.
Expose the same functionality in block-export-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
1c8222b014 nbd: Add max-connections to nbd-server-start
This is a QMP equivalent of qemu-nbd's --shared option, limiting the
maximum number of clients that can attach at the same time.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-9-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
56ee86261e block/export: Add BlockExport infrastructure and block-export-add
We want to have a common set of commands for all types of block exports.
Currently, this is only NBD, but we're going to add more types.

This patch adds the basic BlockExport and BlockExportDriver structs and
a QMP command block-export-add that creates a new export based on the
given BlockExportOptions.

qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
143ea7670c qapi: Rename BlockExport to BlockExportOptions
The name BlockExport will be used for the struct containing the runtime
state of block exports, so change the name of export creation options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-4-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Kevin Wolf
5daa6bfd8e qapi: Create block-export module
Move all block export related types and commands from block-core to the
new QAPI module block-export.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-02 15:46:40 +02:00
Peter Maydell
a0fcff383b qapi: Use rST markup for literal blocks
There are exactly two places in our json doc comments where we
use the markup accepted by the texi doc generator where a '|' in
the first line of a doc comment means the line should be emitted
as a literal block (fixed-width font, whitespace preserved).

Since we use this syntax so rarely, instead of making the rST
generator support it, instead just convert the two uses to
rST-format literal blocks, which are indented and introduced
with '::'.

(The rST generator doesn't complain about the old style syntax,
it just emits it with the '|' and with the whitespace not
preserved, which looks odd, but means we can safely leave this
change until after we've stopped generating texinfo.)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-11-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 17:55:39 +02:00
Peter Maydell
4ac2ee194b docs/interop: Convert qemu-qmp-ref to rST
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.

The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.

Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.

This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 17:55:39 +02:00
Peter Maydell
44e12af775 qapi/machine.json: Escape a literal '*' in doc comment
For rST, '*' is a kind of inline markup (for emphasis), so
"*-softmmu" is a syntax error because of the missing closing '*'.
Escape the '*' with a '\'.

The texinfo document generator will leave the '\' in the
output, which is not ideal, but that generator is going to
go away in a subsequent commit.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-7-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 17:55:39 +02:00
Peter Maydell
8b5905aa05 qapi/block.json: Add newline after "Example:" for block-latency-histogram-set
The block-latency-histogram-set command is the only one which uses
the Example/Examples section with the first line of the documentation
immediately following the ':'. Bring it into line with the rest.

This will allow us to avoid special-casing the indentation handling
for "Examples" sections; instead for Examples as for any other section
header these two indentations will be equivalent:

Examples:
Line one
Line two

Examples: Line one
          Line two

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-3-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 17:55:39 +02:00
Peter Maydell
826bd0690f qapi: Fix doc comment indentation again
In commit 26ec4e53f2 and similar commits we fixed the indentation
for doc comments in our qapi json files to follow a new stricter
standard for indentation, which permits only:
    @arg: description line 1
          description line 2

or:
    @arg:
    line 1
    line 2

but because the script updates that enforce this are not yet in the
tree we have had a steady trickle of subsequent changes which didn't
follow the new rules.

Fix the latest round of mis-indented doc comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Updated for commit 4c437254b8 and a83e24ba1a]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 17:50:55 +02:00
Philippe Mathieu-Daudé
61c7f9876a qapi: Extract PCI commands to 'pci.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
27c9188fa0 qapi: Extract ACPI commands to 'acpi.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
b495ec6c5e qapi: Restrict device memory commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
f68c01470b qapi: Restrict query-uuid command to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the query-uuid command to machine.json pulls less
QAPI-generated code into user-mode.

Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-6-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé
db0f08df59 qapi: Restrict query-vm-generation-id command to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé
a83e24ba1a qapi: Restrict balloon-related commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.

Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé
81e248ce7b qapi: Correct balloon documentation
The documentation incorrectly uses the "size of the balloon"
description when it should be "logical size of the VM". Fix it.

The relation between both values is:

  logical_vm_size = vm_ram_size - balloon_size

Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-3-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Philippe Mathieu-Daudé
8dc007d3d9 qapi: Restrict LostTickPolicy enum to machine code
Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.

Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Igor Mammedov
63e79833c4 cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
Chuan Zheng
4c437254b8 migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  atomic function fixup
  Wording fixup in migration.json based on Eric's review
2020-09-25 12:45:58 +01:00
Chuan Zheng
7df3aa3083 migration/dirtyrate: add DirtyRateStatus to denote calculation status
add DirtyRateStatus to denote calculating status.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  atomic name fixup
2020-09-25 12:45:57 +01:00
zhaolichang
2400e50c15 qapi/: fix some comment spelling errors
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the qapi folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200917075029.313-10-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-17 20:41:08 +02:00
Peter Maydell
2499453eb1 Block layer patches:
- qemu-img create: Fail gracefully when backing file is an empty string
 - Fixes related to filter block nodes ("Deal with filters" series)
 - block/nvme: Various cleanups required to use multiple queues
 - block/nvme: Use NvmeBar structure from "block/nvme.h"
 - file-win32: Fix "locking" option
 - iotests: Allow running from different directory
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAl9Z7bcRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9ZS6w//bos+A0RfRRF0YFWkIBLQWxqzKcGvMJ8W
 XWv3mFzd47UaDgRYwVnCC3CR6bLYEINISngZ3geA4jI1+w7AtYKDOO0HN32dUg+D
 ZrNMn02701CA6qkmpxJ+yjsrl9ltR3jYe0me4Wr39Pvdexa2pl/e+M4Vas6FhkYL
 ghAwNThypscGCrFjAlz3ru2Sc/K+sPWrGoqkzr+SWvsm9wy4vb8aLxr8Yy50x/zc
 CqALS9SQ/YA93BCVi9CzPkVyV3ioA0kg/y38WvLtAQ9GZ3m/ekMro3WvdYsRsFCN
 LGXsuwFig+U7Kd7lJrCS9TLnlTJstNGqPq9jEoV5cThPvGknFfMvVOzRmmP7tzqT
 YRcPRy39z44OoLKa3kyg3aF38BTxt+9gPqBnivKMr9j9EecMvPsXXHRvF+lP+LsP
 j753Ih561hX6FurcjX8pc9GOM2cQA0GjlyL77UTTAmLZyFXP/8e55oQbBuYTylc/
 Xlvmc/T+yEGiEGTnK+FxgDAiUaxbCCM9cDVStJjTvsIq43dwXb48g1onDsGZ5eDf
 j9lmAD6TJxHNOB5ErNsDPODf4/D1wJ9t9WVF8UZp9ArfPHRdxMzT7Q4LvetaDmVl
 +hQC9cgTq8Qd8LwSqbKEYua4L6iGbmLAT7/N6htq5L1eVLg76/tLg/tKSwh/vKAY
 yzPmyHaVK84=
 =gaaW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory

# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (65 commits)
  block/qcow2-cluster: Add missing "fallthrough" annotation
  block/nvme: Pair doorbell registers
  block/nvme: Use generic NvmeBar structure
  block/nvme: Group controller registers in NVMeRegs structure
  file-win32: Fix "locking" option
  iotests: Allow running from different directory
  iotests: Test committing to overridden backing
  iotests: Add test for commit in sub directory
  iotests: Add filter mirror test cases
  iotests: Add filter commit test cases
  iotests: Let complete_and_wait() work with commit
  iotests: Test that qcow2's data-file is flushed
  block: Leave BDS.backing_{file,format} constant
  block: Inline bdrv_co_block_status_from_*()
  blockdev: Fix active commit choice
  block: Drop backing_bs()
  qemu-img: Use child access functions
  nbd: Use CAF when looking for dirty bitmap
  commit: Deal with filters
  backup: Deal with filters
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 14:47:49 +01:00
Peter Maydell
6b306786ca qapi/block-core.json: Fix nbd-server-start docs
Commit eed8b69178 added some new text to the nbd-server-start
documentation in the wrong place.  Since this is after the 'Returns:'
line it's parsed as if it were part of the documentation of the
"Returns:' information.  Move it up to join the rest of the
"documentation of the type as a whole" doc text.

This doesn't look odd in the current HTML rendering, but the
new QAPI-to-rST handling will complain about the indent level
of the lines not matching up with the 'Returns:' line.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200810195019.25427-4-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-07 17:13:30 +02:00
Peter Maydell
b2f1c13c31 qapi: Fix indentation, again
In commit 26ec4e53f2 and similar commits we fixed the indentation
for doc comments in our qapi json files to follow a new stricter
standard for indentation, which permits only:
    @arg: description line 1
          description line 2

or:
    @arg:
    line 1
    line 2

Unfortunately since we didn't manage to get the script changes that
enforced the new style in, a variety of commits (eg df4097aeaf,
2e44570321) introduced new doc text which doesn't follow the new
stricter rules for indentation on multi-line doc comments.  Bring
those into line with the new rules.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200810195019.25427-3-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-07 17:13:19 +02:00
Peter Maydell
76dd0f8497 qapi/migration.json: Fix indentation
Commits 6a9ad15420 and 9004db48c0 added some
new text to qapi/migration.json which doesn't fit the stricter
indentation requirements imposed by the rST documentation generator.
Reindent those lines to the new standard.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200810195019.25427-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-07 17:12:39 +02:00
Max Reitz
05ea385afd blockdev: Fix active commit choice
We have to perform an active commit whenever the top node has a parent
that has taken the WRITE permission on it.

This means that block-commit's @backing-file parameter is no longer
allowed for such nodes, and that users will have to issue a
block-job-complete command.  Neither should pose a problem in practice,
because this case was basically just broken until now.

(Since this commit already touches block-commit's documentation, it also
moves up the chunk explaining general block-commit behavior that for
some reason was situated under @backing-file.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-09-07 12:31:31 +02:00
Max Reitz
3f072a7fb7 mirror: Deal with filters
This includes some permission limiting (for example, we only need to
take the RESIZE permission for active commits where the base is smaller
than the top).

base_overlay is introduced so we can query bdrv_is_allocated_above() on
it - we cannot do that with base itself, because a filter's block_status
is the same as its child node, so if there are filters on base,
bdrv_is_allocated_above() on base would return information including
base.

Use this opportunity to rename qmp_drive_mirror()'s "source" BDS to
"target_backing_bs", because that is what it really refers to.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-09-07 12:31:31 +02:00
Max Reitz
67acfd2188 stream: Deal with filters
Because of the (not so recent anymore) changes that make the stream job
independent of the base node and instead track the node above it, we
have to split that "bottom" node into two cases: The bottom COW node,
and the node directly above the base node (which may be an R/W filter
or the bottom COW node).

Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-09-07 12:31:31 +02:00
Markus Armbruster
382bd1cbbd qapi: Document event VSERPORT_CHANGE is rate-limited
Commit e2ae6159de "virtio-serial: report frontend connection state via
monitor" neglected to document the new event is rate-limited.  Fix
that.

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200806081147.3123652-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-09-03 09:58:26 +02:00
Kashyap Chamarthy
e947e9c801 qapi/block-core.json: Remove stale description of 'blockdev-add'
On a 'qemu-discuss' thread[1], Kevin identifies that the current doc
blurb for @blockdev-add is stale:

    This is actually a documentation bug. @id doesn't exist,
    blockdev-add never creates a BlockBackend. This was different in the
    very first versions of the patches to add blockdev-add and we
    probably just forgot to update the documentation after removing it.

So remove the stale bits.

And the requirement for 'node-name' is already mentioned in the
documentation of @BlockdevOptions:

    [...]
    # @node-name: the node name of the new node (Since 2.0).
    #             This option is required on the top level of blockdev-add.
    #             Valid node names start with an alphabetic character and may
    #             contain only alphanumeric characters, '-', '.' and '_'. Their
    #             maximum length is 31 characters.
    [...]

[1] https://lists.nongnu.org/archive/html/qemu-discuss/2020-07/msg00071.html
    -- equivalent to "-drive if=ide,id=disk0....."

Fixes: be4b67bc7d ("blockdev: Allow creation of BDS trees without BB")

Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200805100158.1239390-1-kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-03 09:41:36 +02:00
Alberto Garcia
7be2025258 qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit
Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with this feature,
which we call "extended L2 entries".

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6476caaa73216bd05b7bb2d504a20415e1665176.1594396418.git.berto@igalia.com>
[mreitz: %s/5\.1/5.2/; fixed 302's and 303's reference output]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-08-25 09:19:55 +02:00
Peter Maydell
66e01f1cdc bitmaps patches for 2020-08-21
- Andrey Shinkevich: Enhance qcow2.py for iotest inspection of qcow2 images
 - Max Reitz: Add block-bitmap-mapping migration parameter
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl8/1JMACgkQp6FrSiUn
 Q2rfQAf+IxDfjueqHm5+KdrA6FJ1qfoeLDndvOopm7ax2KPIsrhNRJQZ2i0Ts/RU
 oIQaY9BESYiQkTdw6q4THmCBlkMDYqDnJuWQRRFC5NAuTA4Q4EbO4j3WZhvh7Vfb
 OPcvdBYo16+ujD/h76mSpeuQvA8fnFUJ1pRhmJvBX78nj0uHE5UMxXjB9v2hoFOx
 tg5ApM3l4Fzm/eUz/5MY5+eX7XUMpmeN7G4qMfJxZGgIAeh6UiZaDVz7J2bVNo/c
 L3EqjPiWJcgTk3Tt8DhAZynVlqkdvgwyGwsntYybAyz+GSPCOPd5gdoAxIdv0wxx
 roVRJ3ARrQl5agYLc2A2nXcmxz9WZA==
 =cec/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-08-21' into staging

bitmaps patches for 2020-08-21

- Andrey Shinkevich: Enhance qcow2.py for iotest inspection of qcow2 images
- Max Reitz: Add block-bitmap-mapping migration parameter

# gpg: Signature made Fri 21 Aug 2020 15:05:07 BST
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2020-08-21:
  iotests: Test node/bitmap aliases during migration
  iotests.py: Let wait_migration() return on failure
  migration: Add block-bitmap-mapping parameter
  iotests: dump QCOW2 header in JSON in #303
  qcow2_format.py: support dumping metadata in JSON format
  qcow2_format.py: collect fields to dump in JSON format
  qcow2.py: Introduce '-j' key to dump in JSON format
  qcow2_format.py: Dump bitmap table serialized entries
  qcow2_format.py: pass cluster size to substructures
  qcow2_format.py: Dump bitmap directory information
  qcow2_format.py: dump bitmap flags in human readable way.
  qcow2_format.py: change Qcow2BitmapExt initialization method
  qcow2_format.py: make printable data an extension class member
  iotests: add test for QCOW2 header dump

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22 19:57:23 +01:00
Peter Maydell
ca489cd037 Machine queue 2020-08-19
Regular post-release changes:
 * hw: add compat machines for 5.2 (Cornelia Huck)
 
 Features:
 * qmp: Expose MachineClass::default_ram_id
   (Michal Privoznik)
 
 Cleanups:
 * qdev: Document qdev_prop_set_drive_err() return value
   (Philippe Mathieu-Daudé)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl89Q5MUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxabojA//TGPJt9ahDopULyUc0sUa53r98l5N
 HovMeUh19FVRD/Iuky+CojqDJwbEqxi06O07pumqye/3wfTNhwToSfBFXZdxsM1b
 vCjeTIVeNThVLYiYMAV36Eqk8jAQnt05/HLOPE9sEa+rjt+TROb8yQwP3YjVoDgJ
 MNyEugJX/BTUV8LsN0t/fWjobWRfQLssAsS7lx6aMgE3VXsFYCPvurWUY4IOB/Yx
 zBOtI3qqHAV5+1m0509Go+bDlQFKIR2/cVdSUdul9pmxmYK3JOi5dddEhiMXbgO6
 Ko8GJVoow6Dr7WNnVRcNKj4oHBcamXS7YCl1ddNyIlOV0yxH20IFqAG4VYE1G7JG
 3eWp21W2NepX+n9KgZSaCKls8A659fkmkYG2O/Qpui4BETpdM5SRpSdAGNt0kXlA
 fXC3iEBoVYdgic5H5yssr5AicDdFRQqgA0YvwleiSc997FkTYq4GdJwK07tk5O3c
 RbfOLNurSHPzvoceU7tDeJa6T6bIF1DCuB/rUupSgKFU3njdh7OgMYaMM5vkN+MO
 dGQ+mw1/LEh5NTgLLlFRVdQBPw98WS88M7qtMQg7ZHMNt7NwP2DyeQxEiZ+0l3p/
 IL519HY0ZJgWnkH7uKf2UclmzOQ24PoKJknhBNN1QiGJUGJWk6pxeEd8xFJlokKi
 26ljxYyTzYQE8tU=
 =0wqi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue 2020-08-19

Regular post-release changes:
* hw: add compat machines for 5.2 (Cornelia Huck)

Features:
* qmp: Expose MachineClass::default_ram_id
  (Michal Privoznik)

Cleanups:
* qdev: Document qdev_prop_set_drive_err() return value
  (Philippe Mathieu-Daudé)

# gpg: Signature made Wed 19 Aug 2020 16:21:55 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  hw: add compat machines for 5.2
  qmp: Expose MachineClass::default_ram_id
  qdev: Document qdev_prop_set_drive_err() return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22 14:37:31 +01:00
Max Reitz
31e4c354b3 migration: Add block-bitmap-mapping parameter
This migration parameter allows mapping block node names and bitmap
names to aliases for the purpose of block dirty bitmap migration.

This way, management tools can use different node and bitmap names on
the source and destination and pass the mapping of how bitmaps are to be
transferred to qemu (on the source, the destination, or even both with
arbitrary aliases in the migration stream).

While touching this code, fix a bug where bitmap names longer than 255
bytes would fail an assertion in qemu_put_counted_string().

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-21 08:56:09 -05:00
Marc-André Lureau
5242523b5f meson: convert qapi-specific to meson
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:24 -04:00
Paolo Bonzini
a81df1b68b libqemuutil, qapi, trace: convert to meson
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.

Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a.  Because all of its users required gio
otherwise, the bug was hidden.  Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:08 -04:00
Paolo Bonzini
243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Michal Privoznik
c556600598 qmp: Expose MachineClass::default_ram_id
If a management application (like Libvirt) want's to preserve
migration ability and switch to '-machine memory-backend' it
needs to set exactly the same RAM id as QEMU would. Since the id
is machine type dependant, expose it under 'query-machines'
result. Some machine types don't have the attribute set (riscv
family for example), therefore the QMP attribute must be
optional.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <9384422f63fe594a54d801f9cb4539b1d2ce9b67.1590481402.git.mprivozn@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[ehabkost: updated doc to "since 5.2"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-19 10:45:21 -04:00
Andrea Bolognani
f7160f3218 schemas: Add vim modeline
The various schemas included in QEMU use a JSON-based format which
is, however, strictly speaking not valid JSON.

As a consequence, when vim tries to apply syntax highlight rules
for JSON (as guessed from the file name), the result is an unreadable
mess which mostly consist of red markers pointing out supposed errors
in, well, pretty much everything.

Using Python syntax highlighting produces much better results, and
in fact these files already start with specially-formatted comments
that instruct Emacs to process them as if they were Python files.

This commit adds the equivalent special comments for vim.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20200729185024.121766-1-abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-08-03 08:28:08 +02:00
Markus Armbruster
fbeed19761 qapi: Delete unwanted indentation of top-level expressions
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200730091656.2633334-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[One more line de-indented]
2020-08-03 08:28:08 +02:00
Peter Maydell
6ac3f1e799 qapi/machine.json: Fix missing newline in doc comment
In commit 176d2cda0d we added the @die-id field
to the CpuInstanceProperties struct, but in the process
accidentally removed the newline between the doc-comment
lines for @core-id and @thread-id.

Put the newline back in; this fixes a misformatting in the
generated HTML QMP reference manual.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200729191019.19168-1-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-08-03 08:28:08 +02:00
Marc-André Lureau
a08464521c Remove VXHS block device
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17 14:20:57 +02:00
Kevin Wolf
ffa244c84a file-posix: Mitigate file fragmentation with extent size hints
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).

On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.

This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.

For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.

The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.

Without an extent size hint:

    $ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
    Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
    Run completed in 25.848 seconds.
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
    Run completed in 19.616 seconds.
    $ filefrag ~/tmp/test.raw
    /home/kwolf/tmp/test.raw: 2000000 extents found
    $ time ./qemu-img map ~/tmp/test.raw
    Offset          Length          Mapped to       File
    0               0x1e8480000     0               /home/kwolf/tmp/test.raw

    real    0m1,279s
    user    0m0,043s
    sys     0m1,226s

With the new default extent size hint of 1 MB:

    $ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
    Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
    Run completed in 11.833 seconds.
    $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
    Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
    Run completed in 10.155 seconds.
    $ filefrag ~/tmp/test.raw
    /home/kwolf/tmp/test.raw: 178 extents found
    $ time ./qemu-img map ~/tmp/test.raw
    Offset          Length          Mapped to       File
    0               0x1e8480000     0               /home/kwolf/tmp/test.raw

    real    0m0,061s
    user    0m0,040s
    sys     0m0,014s

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14 15:18:59 +02:00
Michael Rolnik
42f3ff0013 target/avr: Register AVR support with the rest of QEMU
Add AVR related definitions into QEMU, make AVR support buildable.

[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-23-huth@tuxfamily.org>
[PMD: Fixed @avr tag in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-11 11:02:05 +02:00
Markus Armbruster
7b3cb8037c qapi: Purge error_propagate() from QAPI core
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-42-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
012d4c96e2 qapi: Make visitor functions taking Error ** return bool, not void
See recent commit "error: Document Error API usage rules" for
rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-18-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
235e59cf03 qemu-option: Use returned bool to check for failure
The previous commit enables conversion of

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., &err)) {
        ...
    }

for QemuOpts functions that now return true / false on success /
error.  Coccinelle script:

    @@
    identifier fun = {
        opts_do_parse, parse_option_bool, parse_option_number,
        parse_option_size, qemu_opt_parse, qemu_opt_rename, qemu_opt_set,
        qemu_opt_set_bool, qemu_opt_set_number, qemu_opts_absorb_qdict,
        qemu_opts_do_parse, qemu_opts_from_qdict_entry, qemu_opts_set,
        qemu_opts_validate
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-15-armbru@redhat.com>
[Conflict with commit 0b6786a9c1 "block/amend: refactor qcow2 amend
options" resolved by rerunning Coccinelle on master's version]
2020-07-10 15:17:35 +02:00
Peter Maydell
eb2c66b10e Block patches for 5.1:
- LUKS keyslot amendment
   (+ patches to make the iotests pass on non-Linux systems, and to keep
      the tests passing for qcow v1, and to skip LUKS tests (including
      qcow2 LUKS) when the built qemu does not support it)
 - Refactoring in the block layer: Drop the basically unnecessary
   unallocated_blocks_are_zero field from BlockDriverInfo
 - Fix qcow2 preallocation when the image size is not a multiple of the
   cluster size
 - Fix in block-copy code
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl8C9s0SHG1yZWl0ekBy
 ZWRoYXQuY29tAAoJEPQH2wBh1c9AgMsH/A3fe7F6w1eaVQWoU/ABNwJahWzv5oNG
 7s/rsYqHdr7GQldbfsZS8zrca2zY5jNRopfoTEmrCLFFUbHcXZNQzZObh2JZ892p
 EfjHfHMqAC6e0ZnvKWgWPyRMGnsh7+H5U3EXiob9F4+YXC3SQRqzuwg0K9Tmk2uE
 CpB/zBxI5BcYdEA/VD5uJxle6H49JdUXO64oDxTwMaJZuJKoiBGWX0iBhGeZEjcm
 gPX5LuwVoc80HZquVqTGik3hwrlESYAwGN1GaicibHUR0f4CFrxFDxyEd3bZ8fGO
 9+ScuO0vZmUDSal2tHjRsbKmcEdwtpI8JHn3tDdLljRoDOHrssMq2P4=
 =v33H
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-07-06' into staging

Block patches for 5.1:
- LUKS keyslot amendment
  (+ patches to make the iotests pass on non-Linux systems, and to keep
     the tests passing for qcow v1, and to skip LUKS tests (including
     qcow2 LUKS) when the built qemu does not support it)
- Refactoring in the block layer: Drop the basically unnecessary
  unallocated_blocks_are_zero field from BlockDriverInfo
- Fix qcow2 preallocation when the image size is not a multiple of the
  cluster size
- Fix in block-copy code

# gpg: Signature made Mon 06 Jul 2020 11:02:53 BST
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-07-06: (31 commits)
  qed: Simplify backing reads
  block: drop unallocated_blocks_are_zero
  block/vhdx: drop unallocated_blocks_are_zero
  block/file-posix: drop unallocated_blocks_are_zero
  block/iscsi: drop unallocated_blocks_are_zero
  block/crypto: drop unallocated_blocks_are_zero
  block/vpc: return ZERO block-status when appropriate
  block/vdi: return ZERO block-status when appropriate
  block: inline bdrv_unallocated_blocks_are_zero()
  qemu-img: convert: don't use unallocated_blocks_are_zero
  iotests: add tests for blockdev-amend
  block/qcow2: implement blockdev-amend
  block/crypto: implement blockdev-amend
  block/core: add generic infrastructure for x-blockdev-amend qmp command
  iotests: qemu-img tests for luks key management
  block/qcow2: extend qemu-img amend interface with crypto options
  block/crypto: implement the encryption key management
  block/crypto: rename two functions
  block/amend: refactor qcow2 amend options
  block/amend: separate amend and create options for qemu-img
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-07 19:47:26 +01:00
Cindy Lu
1e0a84ea49 vhost-vdpa: introduce vhost-vdpa net client
This patch set introduces a new net client type: vhost-vdpa.
vhost-vdpa net client will set up a vDPA device which is specified
by a "vhostdev" parameter.

Signed-off-by: Lingshan Zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-15-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2020-07-07 07:59:51 -04:00
Maxim Levitsky
8ea1613d91 block/qcow2: implement blockdev-amend
Currently the implementation only supports amending the encryption
options, unlike the qemu-img version

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-14-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 08:49:28 +02:00
Maxim Levitsky
30da9dd88a block/crypto: implement blockdev-amend
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-13-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 08:49:28 +02:00
Maxim Levitsky
ced914d0ab block/core: add generic infrastructure for x-blockdev-amend qmp command
blockdev-amend will be used similiar to blockdev-create
to allow on the fly changes of the structure of the format based block devices.

Current plan is to first support encryption keyslot management for luks
based formats (raw and embedded in qcow2)

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-12-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 08:49:28 +02:00
Maxim Levitsky
557d2bdcca qcrypto/luks: implement encryption key management
Next few patches will expose that functionality to the user.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-3-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 08:49:28 +02:00
Maxim Levitsky
43cbd06df2 qcrypto/core: add generic infrastructure for crypto options amendment
This will be used first to implement luks keyslot management.

block_crypto_amend_opts_init will be used to convert
qemu-img cmdline to QCryptoBlockAmendOptions

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-07-06 08:49:28 +02:00
David Hildenbrand
722a3c783e virtio-pci: Send qapi events when the virtio-mem size changes
Let's register the notifier and trigger the qapi event with the right
device id.

MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.

Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
David Hildenbrand
910b25766b virtio-mem: Paravirtualized memory hot(un)plug
This is the very basic/initial version of virtio-mem. An introduction to
virtio-mem can be found in the Linux kernel driver [1]. While it can be
used in the current state for hotplug of a smaller amount of memory, it
will heavily benefit from resizeable memory regions in the future.

Each virtio-mem device manages a memory region (provided via a memory
backend). After requested by the hypervisor ("requested-size"), the
guest can try to plug/unplug blocks of memory within that region, in order
to reach the requested size. Initially, and after a reboot, all memory is
unplugged (except in special cases - reboot during postcopy).

The guest may only try to plug/unplug blocks of memory within the usable
region size. The usable region size is a little bigger than the
requested size, to give the device driver some flexibility. The usable
region size will only grow, except on reboots or when all memory is
requested to get unplugged. The guest can never plug more memory than
requested. Unplugged memory will get zapped/discarded, similar to in a
balloon device.

The block size is variable, however, it is always chosen in a way such that
THP splits are avoided (e.g., 2MB). The state of each block
(plugged/unplugged) is tracked in a bitmap.

As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now
expose "VirtioMEMDeviceInfo" via "query-memory-devices".

--------------------------------------------------------------------------

There are two important follow-up items that are in the works:
1. Resizeable memory regions: Use resizeable allocations/RAM blocks to
   grow/shrink along with the usable region size. This avoids creating
   initially very big VMAs, RAM blocks, and KVM slots.
2. Protection of unplugged memory: Make sure the gust cannot actually
   make use of unplugged memory.

Other follow-up items that are in the works:
1. Exclude unplugged memory during migration (via precopy notifier).
2. Handle remapping of memory.
3. Support for other architectures.

--------------------------------------------------------------------------

Example usage (virtio-mem-pci is introduced in follow-up patches):

Start QEMU with two virtio-mem devices (one per NUMA node):
 $ qemu-system-x86_64 -m 4G,maxmem=20G \
  -smp sockets=2,cores=2 \
  -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
  [...]
  -object memory-backend-ram,id=mem0,size=8G \
  -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \
  -object memory-backend-ram,id=mem1,size=8G \
  -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G

Query the configuration:
 (qemu) info memory-devices
 Memory device [virtio-mem]: "vm0"
   memaddr: 0x140000000
   node: 0
   requested-size: 0
   size: 0
   max-size: 8589934592
   block-size: 2097152
   memdev: /objects/mem0
 Memory device [virtio-mem]: "vm1"
   memaddr: 0x340000000
   node: 1
   requested-size: 1073741824
   size: 1073741824
   max-size: 8589934592
   block-size: 2097152
   memdev: /objects/mem1

Add some memory to node 0:
 (qemu) qom-set vm0 requested-size 500M

Remove some memory from node 1:
 (qemu) qom-set vm1 requested-size 200M

Query the configuration again:
 (qemu) info memory-devices
 Memory device [virtio-mem]: "vm0"
   memaddr: 0x140000000
   node: 0
   requested-size: 524288000
   size: 524288000
   max-size: 8589934592
   block-size: 2097152
   memdev: /objects/mem0
 Memory device [virtio-mem]: "vm1"
   memaddr: 0x340000000
   node: 1
   requested-size: 209715200
   size: 209715200
   max-size: 8589934592
   block-size: 2097152
   memdev: /objects/mem1

[1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
Thomas Huth
71830d8430 net: Drop the NetLegacy structure, always use Netdev instead
Now that the "name" parameter is gone, there is hardly any difference
between NetLegacy and Netdev anymore, so we can drop NetLegacy and always
use Netdev to simplify the code quite a bit.

The only two differences that were really left between Netdev and NetLegacy:

1) NetLegacy does not allow a "hubport" type. We can continue to block
   this with a simple check in net_client_init1() for this type.

2) The "id" parameter was optional in NetLegacy (and an internal id
   was chosen via assign_name() during initialization), but it is mandatory
   for Netdev. To avoid that the visitor code bails out here, we have to
   add an internal id to the QemuOpts already earlier now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18 21:05:52 +08:00
Thomas Huth
9d903f30cb net: Drop the legacy "name" parameter from the -net option
It's been deprecated since QEMU v3.1, so it's time to finally
remove it. The "id" parameter can simply be used instead.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18 21:05:52 +08:00
Peter Xu
12fcf49c1a pci: Display PCI IRQ pin in "info pci"
Sometimes it would be good to be able to read the pin number along
with the IRQ number allocated.  Since we'll dump the IRQ number, no
reason to not dump the pin information.  For example, the vfio-pci
device will overwrite the pin with the hardware pin number.  It would
be nice to know the pin number of one assigned device from QMP/HMP.

CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
CC: Julia Suvorova <jusual@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200317195908.283800-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-06-12 10:17:06 -04:00
Eric Blake
5d72c68b49 qcow2: Expose bitmaps' size during measure
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data.  Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps.  Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).

The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present).  If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image).  This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.

The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.

Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor.  But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.

See also: https://bugzilla.redhat.com/1779904

Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-28 13:16:16 -05:00
Geoffrey McRae
2e44570321 audio/jack: add JACK client audiodev
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.

Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-25 11:30:03 +02:00
xiaoqiang zhao
776b97d360 qemu-sockets: add abstract UNIX domain socket support
unix_listen/connect_saddr now support abstract address types

two aditional BOOL switches are introduced:
tight: whether to set @addrlen to the minimal string length,
       or the maximum sun_path length. default is TRUE
abstract: whether we use abstract address. default is FALSE

cli example:
-monitor unix:/tmp/unix.socket,abstract,tight=off
OR
-chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-20 10:34:40 +01:00
Denis Plotnikov
d298ac10ad qcow2: add zstd cluster compression
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.

The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G

The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.

compress cmd:
  time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
                  src.img [zlib|zstd]_compressed.img
decompress cmd
  time ./qemu-img convert -O qcow2
                  [zlib|zstd]_compressed.img uncompressed.img

           compression               decompression
         zlib       zstd           zlib         zstd
------------------------------------------------------------
real     65.5       16.3 (-75 %)    1.9          1.6 (-16 %)
user     65.0       15.8            5.3          2.5
sys       3.3        0.2            2.0          2.0

Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G

Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-13 14:20:31 +02:00
Denis Plotnikov
572ad9783f qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.

It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.

The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.

The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.

Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.

The tests are fixed in the following ways:
    * filter out compression_type for many tests
    * fix header size, feature table size and backing file offset
      affected tests: 031, 036, 061, 080
      header_size +=8: 1 byte compression type
                       7 bytes padding
      feature_table += 48: incompatible feature compression type
      backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
    * add "compression type" for test output matching when it isn't filtered
      affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
                      242, 255, 274, 280

Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-13 14:20:31 +02:00
Wei Wang
e460a4b1a4 migration/xbzrle: add encoding rate
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.

Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Keqian Zhu
cbbf818224 migration/throttle: Add cpu-throttle-tailslow migration parameter
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.

If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.

Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Markus Armbruster
faad584adb qapi: Assert non-input visitors see only valid narrow integers
visit_type_intN() and visit_type_uintN() fail when the value is out of
bounds.

This is appropriate with an input visitor: the value comes from input,
and input may be bad.

It should never happen with the other visitors: the value comes from
the caller, and callers must keep it within bounds.  Assert that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-10-armbru@redhat.com>
2020-04-30 07:26:40 +02:00
Markus Armbruster
777d20cfa5 qapi: Assert output visitors see only valid enum values
output_type_enum() fails when *obj is not a valid value of the enum
type.  Should not happen.  Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]
2020-04-30 07:26:09 +02:00
Markus Armbruster
8b7ce95b46 qapi: Fix Visitor contract for start_alternate()
The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors.  Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>
2020-04-30 06:51:15 +02:00
Markus Armbruster
8e08bf4ea2 qapi: Assert incomplete object occurs only in dealloc visitor
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
2020-04-30 06:51:15 +02:00
Markus Armbruster
7b1cd1c65a qobject: Eliminate qdict_iter(), use qdict_first(), qdict_next()
qdict_iter() has just three uses and no test coverage.  Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-30 06:51:15 +02:00
Marc-André Lureau
b3fbb32812 qmp: fix leak on callbacks that return both value and error
Direct leak of 4120 byte(s) in 1 object(s) allocated from:
    #0 0x7fa114931887 in __interceptor_calloc (/lib64/libasan.so.6+0xb0887)
    #1 0x7fa1144ad8f0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x588f0)
    #2 0x561e3c9c8897 in qmp_object_add /home/elmarco/src/qemu/qom/qom-qmp-cmds.c:291
    #3 0x561e3cf48736 in qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:155
    #4 0x561e3c8efb36 in monitor_qmp_dispatch /home/elmarco/src/qemu/monitor/qmp.c:145
    #5 0x561e3c8f09ed in monitor_qmp_bh_dispatcher /home/elmarco/src/qemu/monitor/qmp.c:234
    #6 0x561e3d08c993 in aio_bh_call /home/elmarco/src/qemu/util/async.c:136
    #7 0x561e3d08d0a5 in aio_bh_poll /home/elmarco/src/qemu/util/async.c:164
    #8 0x561e3d0a535a in aio_dispatch /home/elmarco/src/qemu/util/aio-posix.c:380
    #9 0x561e3d08e3ca in aio_ctx_dispatch /home/elmarco/src/qemu/util/async.c:298
    #10 0x7fa1144a776e in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x5276e)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200325184723.2029630-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-02 14:55:46 -04:00
Yoshinori Sato
c8c35e5f51 Add rx-softmmu
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
      qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-03-19 17:58:05 +01:00
Eric Blake
db2a380c84 net: Complete qapi-fication of netdev_add
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic.  Back then, we did not have the deprecation cycle to
allow us to make progress.  But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:

{"execute": "netdev_add", "arguments": { "id": "netdev0",
  "type": "user", "dnssearch": [
    { "str": "8.8.8.8" }, { "str": "8.8.4.4" }
  ]}}

So without further ado, let's turn on proper QAPI.  netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1().  In addition to fixing array parameters, the
following additional differences occur:

-  {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit.  Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.

-  {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen".  Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.

-  {'execute':'netdev_add',
     'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
   {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.

In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev.  In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":

- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
  monitors can mess with CLI netdevs, CLI cannot mess with
  monitor netdevs):
  - main() case QEMU_OPTION_netdev: store CLI definition
  - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
  similar, dealing only with CLI
  - net_init_clients(): Pass CLI to net_client_init()
- Monitor:
  - hmp_netdev_add(): straightforward parse into net_client_init()
  - qmp_netdev_add(): subject of this patch, used to add full
  object to option group, now just adds bare-bones id
  - qmp_netdev_del(), netdev_del_completion(): check the option group
  solely for id, as a 'is this a netdev' predicate

Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:50:14 +01:00
Marc-André Lureau
f0ccc00be1 qmp: constify QmpCommand and list
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:43:12 +01:00
Markus Armbruster
df4097aeaf qapi: Mark deprecated QMP parts with feature 'deprecated'
Add feature 'deprecated' to the deprecated QMP commands, so their
deprecation becomes visible in output of query-qmp-schema.  Looks like
this:

    {"name": "query-cpus",
     "ret-type": "[164]",
     "meta-type": "command",
     "arg-type": "0",
---> "features": ["deprecated"]}

Management applications could conceivably use this for static
checking.

The deprecated commands are change, cpu-add, migrate-set-cache-size,
migrate_set_downtime, migrate_set_speed, query-cpus, query-events,
query-migrate-cache-size.

The deprecated command arguments are block-commit arguments @base and
@top, and block_set_io_throttle, blockdev-change-medium,
blockdev-close-tray, blockdev-open-tray, eject argument @device.

The deprecated command results are query-cpus-fast result @arch,
query-block result @dirty-bitmaps, query-named-block-nodes result
@encryption_key_missing and result @dirty-bitmaps's member @status.
Same for query-block result @inserted, which mirrors
query-named-block-nodes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-17 21:43:12 +01:00
Markus Armbruster
4a8837389e qapi: Replace qmp_dispatch()'s TODO comment by an explanation
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-17 21:41:33 +01:00
Markus Armbruster
a62c61747f qapi: Simplify how qmp_dispatch() gets the request ID
We convert the request object to a QDict twice: first in
qmp_dispatch() to get the request ID, and then again in
qmp_dispatch_check_obj(), which converts to QDict, then checks and
returns it.  We can't get the request ID from the latter, because it's
null when the qdict flunks the checks.

Move the checked conversion to QDict from qmp_dispatch_check_obj() to
qmp_dispatch(), and drop the duplicate there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-24-armbru@redhat.com>
2020-03-17 21:25:47 +01:00
Markus Armbruster
d322603563 qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-23-armbru@redhat.com>
2020-03-17 21:25:47 +01:00
Markus Armbruster
cf4a0643c8 qapi: Inline do_qmp_dispatch() into qmp_dispatch()
Both functions check @request is a QDict, and both have code for
QCO_NO_SUCCESS_RESP.  This wasn't the case back when they were
created.  It's a sign of muddled responsibilities.  Inline.  The next
commits will clean up some more.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-22-armbru@redhat.com>
2020-03-17 21:25:47 +01:00
Markus Armbruster
84ab008687 qapi: Add feature flags to struct members
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-21-armbru@redhat.com>
2020-03-17 21:25:47 +01:00
Markus Armbruster
013b4efc9b qapi: Add feature flags to remaining definitions
In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature").  In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").

Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>
2020-03-17 19:58:34 +01:00
Markus Armbruster
0f365e3332 qapi: Belatedly update doc comment for @wait deprecation
Commit a9b305ba29 "socket: allow wait=false for client socket"
deprecated use of @wait for client socket chardevs, but neglected to
update char.json's doc comment.  Make up for that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-3-armbru@redhat.com>
2020-03-17 19:58:34 +01:00
Volker Rümelin
019b5ba7b3 qapi/audio: add documentation for AudioFormat
The review for patch ed2a4a7941 "audio: proper support for
float samples in mixeng" suggested this would be a good idea.

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20200308193321.20668-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-16 10:18:07 +01:00
Keqian Zhu
dc14a47076 migration/throttle: Add throttle-trig-thres migration parameter
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.

If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.

The default value is 50 and valid range is 1 to 100.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13 09:36:30 +00:00
Peter Krempa
c6bdc312f3 qapi: Add '@allow-write-only-overlay' feature for 'blockdev-snapshot'
Anounce that 'blockdev-snapshot' command's permissions allow changing
of the backing file if the 'consistent_read' permission is not required.

This is useful for libvirt to allow late opening of the backing chain
during a blockdev-mirror.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-11 15:54:38 +01:00
Florian Florensa
19ae9ae014 block/rbd: Add support for ceph namespaces
Starting from ceph Nautilus, RBD has support for namespaces, allowing
for finer grain ACLs on images inside a pool, and tenant isolation.

In the rbd cli tool documentation, the new image-spec and snap-spec are :
 - [pool-name/[namespace-name/]]image-name
 - [pool-name/[namespace-name/]]image-name@snap-name

When using an non namespace's enabled qemu, it complains about not
finding the image called namespace-name/image-name, thus we only need to
parse the image once again to find if there is a '/' in its name, and if
there is, use what is before it as the name of the namespace to later
pass it to rados_ioctx_set_namespace.
rados_ioctx_set_namespace if called with en empty string or a null
pointer as the namespace parameters pretty much does nothing, as it then
defaults to the default namespace.

The namespace is extracted inside qemu_rbd_parse_filename, stored in the
qdict, and used in qemu_rbd_connect to make it work with both qemu-img,
and qemu itself.

Signed-off-by: Florian Florensa <fflorensa@online.net>
Message-Id: <20200110111513.321728-2-fflorensa@online.net>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
2af282ec51 qemu-storage-daemon: Add --monitor option
This adds and parses the --monitor option, so that a QMP monitor can be
used in the storage daemon. The monitor offers commands defined in the
QAPI schema at storage-daemon/qapi/qapi-schema.json.

The --monitor options currently allows to create multiple monitors with
the same ID. This part of the interface is considered unstable. We will
reject such configurations as soon as we have a design for the monitor
subsystem to perform these checks. (In the system emulator, we depend on
QemuOpts rejecting duplicate IDs.)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
a2f411c467 monitor: Add allow_hmp parameter to monitor_init()
Add a new parameter allow_hmp to monitor_init() so that the storage
daemon can disable HMP.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
f2098725aa monitor: Create QAPIfied monitor_init()
This adds a new QAPI-based monitor_init() function. The existing
monitor_init_opts() is rewritten to simply put its QemuOpts parameter
into a visitor and pass the resulting QAPI object to monitor_init().

This will cause some change in those error messages for the monitor
options in the system emulator that are now generated by the visitor
rather than explicitly checked in monitor_init_opts().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
9a9f909951 qapi: Create 'pragma' module
We want to share the whitelists between the system emulator schema and
the storage daemon schema, so move all the pragmas from the main schema
file into a separate file that can be included from both.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
39411120b7 qemu-storage-daemon: Add --export option
Add a --export option to qemu-storage-daemon to export a block node. For
now, only NBD exports are implemented. Apart from the 'type' option
(which is the implied key), it maps the arguments for nbd-server-add to
the command line. Example:

    --export nbd,device=disk,name=test-export,writable=on

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-12-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
c62d24e906 blockdev-nbd: Boxed argument type for nbd-server-add
Move the arguments of nbd-server-add to a new struct BlockExportNbd and
convert the command to 'boxed': true. This makes it easier to share code
with the storage daemon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
eed8b69178 qemu-storage-daemon: Add --nbd-server option
Add a --nbd-server option to qemu-storage-daemon to start the built-in
NBD server right away. It maps the arguments for nbd-server-start to the
command line, with the exception that it uses SocketAddress instead of
SocketAddressLegacy: New interfaces shouldn't use legacy types, and the
additional nesting would be nasty on the command line.

Example (only with required options):

    --nbd-server addr.type=inet,addr.host=localhost,addr.port=10809

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
5f07c4d60d qapi: Flatten object-add
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.

'props' is still accepted after this patch, but marked as deprecated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:27 +01:00
Kevin Wolf
5a16818b45 block: Move sysemu QMP commands to QAPI block module
QMP commands that are related to the system emulator and don't make
sense in the context of tools such as qemu-storage-daemon should live in
qapi/block.json rather than qapi/block-core.json. Move them there.

The associated data types are actually also used in code shared with the
tools, so they stay in block-core.json.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:15:38 +01:00
Kevin Wolf
b3cf1ec06a block: Move common QMP commands to block-core QAPI module
block-core is for everything that isn't related to the system emulator.
Internal snapshots, the NBD server and quorum events make sense in the
tools, too, so move them to block-core.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:15:38 +01:00
Juan Quintela
87dc6f5f66 multifd: Add zstd compression multifd support
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:25:49 +01:00
Juan Quintela
6a9ad15420 multifd: Add multifd-zstd-level parameter
This parameter specifies the zstd compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28 09:25:28 +01:00
Juan Quintela
7ec2c2b3c1 multifd: Add zlib compression multifd support
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:24:43 +01:00
Juan Quintela
9004db48c0 multifd: Add multifd-zlib-level parameter
This parameter specifies the zlib compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:24:43 +01:00
Juan Quintela
96eef04238 multifd: Add multifd-compression parameter
This will store the compression method to use.  We start with none.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

---

Rename multifd-method to multifd-compression
2020-02-28 09:24:43 +01:00
Peter Krempa
facda5443f qapi: Allow getting flat output from 'query-named-block-nodes'
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.

Add a parameter to the command which will return just the top level
structs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
Kevin Wolf
8faad1c7fb commit: Expose on-error option in QMP
Now that the error handling in the common block job is fixed, we can
expose the on-error option in QMP instead of hard-coding it as 'report'
in qmp_block_commit().

This fulfills the promise that the old comment in that function made,
even if a bit later than expected: "This will be part of the QMP
command, if/when the BlockdevOnError change for blkmirror makes it in".

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-7-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-18 10:53:56 +01:00
Kevin Wolf
248e3ffb66 qapi: Document meaning of 'ignore' BlockdevOnError for jobs
It is not obvious what 'ignore' actually means for block jobs: It could
be continuing the job and returning success in the end despite the error
(no block job does this). It could also mean continuing and returning
failure in the end (this is what stream does). And it can mean retrying
the failed request later (this is what backup, commit and mirror do).

This (somewhat inconsistent) behaviour was introduced and described for
stream and mirror in commit 32c81a4a6e. backup and commit were
introduced later and use the same model as mirror.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-2-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-18 10:53:56 +01:00
Kevin Wolf
fa4dcf577e qapi: Split control.json off misc.json
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:53:47 +01:00
Peter Maydell
bb5ccf225e qapi: Delete all the "foo: dropped in n.n" notes
A handful of QAPI doc comments include lines like
"ppcemb: dropped in 3.1". The doc comment parser will just
put these into whatever the preceding section was; sometimes
that's "Notes", and sometimes it's some random other section,
as with "NetClientDriver" where the "'dump': dropped in 2.12"
line ends up in the "Since:" section.

This tends to render wrongly, more so in the upcoming rST
generator, but sometimes even in the Texinfo, as in the case
of QKeyCode:
   ac_bookmarks
       since 2.10 altgr, altgr_r: dropped in 2.10

Since commit 3264ffced3 (v4.2.0), we have a better place to tell
users about deprecated and deleted functionality --
qemu-deprecated.texi.  These "dropped in" remarks all predate it, and
other feature drops of that vintage are not documented anywhere, so
moving these to qemu-deprecated.texi makes little sense.  Drop them
instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
a660eed482 qapi/migration.json: Replace _this_ with *this*
The MigrationInfo::setup-time documentation is the only place where we
use _this_ inline markup for emphasis, commonly rendered in italics.
We would like to switch the doc comments to rST format, but rST
doesn't recognize that markup and emits literal underscores.

Switch to *this* instead.  Changes markup to strong emphasis with
Texinfo, commonly rendered as bold.  With rST, it will go right back
to emphasis / italics.

rST also uses **this** for strong (commonly rendered bold) where
Texinfo uses *this*. We have one place in the doc comments
which uses strong/bold markup, in qapi/introspect.json:
    Note: the QAPI schema is also used to help define *internal*

When we switch to rST that will be rendered as emphasis / italics.
Markus (who wrote that) thinks that using emphasis / italics
there is an improvement, so we leave that markup alone.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
100cc4fe0f qapi: Add blank lines before bulleted lists
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
e050e42678 qapi: Use explicit bulleted lists
A JSON block comment like this:
     Returns: nothing on success
              If @node is not a valid block device, DeviceNotFound
              If @name is not found, GenericError with an explanation

renders like this:

     Returns: nothing on success If node is not a valid block device,
     DeviceNotFound If name is not found, GenericError with an explanation

because whitespace is not significant.

Use an actual bulleted list, so that the formatting is correct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
449be9df52 qapi/ui.json: Avoid `...' Texinfo style quoting
Avoid Texinfo style quoting with `...', because we would like to
switch the doc comments to rST format, and rST treats it as a syntax
error. Use '...' instead, as we do in other doc comments. This looks
OK in Texinfo, and rST formats it as paired-quotation-marks.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-13-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
43d7c2d06e qapi/ui.json: Put input-send-event body text in the right place
In the doc comment for input-send-event, there is a multi-line
chunk of text ("The @device...take precedence") which is intended
to be the main body text describing the event. However it has
been placed after the arguments and Returns: section, which
means that the parser actually thinks that this text is
part of the "Returns" section text.

Move the body text up to the top so that the parser correctly
classifies it as body.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-12-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
dbb28bc850 qapi: Remove hardcoded tabs
There are some stray hardcoded tabs in some of our json files;
remove them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-11-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
26ec4e53f2 qapi: Fix indent level on doc comments in json files
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.

Make the doc comments more strongly consistent about indentation
for multiline constructs like:

@arg: description line 1
      description line 2

Returns: line one
         line 2

so that there is always exactly one space after the colon, and
subsequent lines align with the first.

This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace).  This does mean that we end up with some
over-length lines.

Note that when the documentation for an argument fits on a single
line like this:

@arg: one line only

then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
f56275064e qapi: Fix incorrect "Not documented" claims in QMP documentation
Some qapi doc comments have forgotten the ':' after the
@argument, like this:

# @filename         Filename for the new image file
# @size             Size of the virtual disk in bytes

The result is that these are parsed as part of the body
text and appear as a run-on line:
  filename Filename for the new image file size Size of the virtual disk in bytes"
followed by
  filename: string
    Not documented
  size: int
    Not documented

in the 'Members' section.

Correct the formatting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-9-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:50 +01:00
Peter Maydell
0a940d66de qapi/block-core.json: Use literal block for ascii art
The ascii-art graph in the BlockLatencyHistogramInfo documentation
doesn't render correctly, because the whitespace is collapsed.

Use the '|' format that emits a literal 'example' block so the graph
is displayed correctly.

Strictly the Texinfo generated is still wrong because each line
goes into its own @example environment, but it renders better
than what we had before.

Fixing this rendering is a necessary prerequisite for the upcoming rST
generator, which otherwise complains about the inconsistent
indentation in the ascii-art graph.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-8-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15 11:41:49 +01:00
Andrea Bolognani
2a7d957596 qapi: Expand documentation for LostTickPolicy
The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20200211183744.210298-1-abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-14 16:31:19 +01:00
Gerd Hoffmann
7027bdd77f ui: add show-cursor option
When enabled, this forces showing the mouse cursor,
i.e. do not hide the pointer on mouse grabs.
Defaults to off.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-12 13:25:17 +01:00
Peter Maydell
b6bef1147f audio: bugfixes, mostly audio backend rewrite fallout
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJePRWoAAoJEEy22O7T6HE4jbAQALWq/XyrQdK9kESICky6aymy
 xTFggLtDFtYXWemnJGILJB0HPxaXlmb0qKeaCwmCgsiWgErSH9RB1EW0v5Q6Pv4Z
 /l4ntJBnGy3tnDmAeu0RkH24u//tOV1Vwh5rxQIfEHYO1xsEAAEncXXXsjj3ddR0
 X/9zObhvFjforIPVVf7YkflHGg6FIOXpAT0rqSs3Wbhyd0xWlCrnkcikQqAihdow
 mZcVYi+K0K4DXh/OFOmMPjj0OrzP4lQS1NREL9OIqzBUtTgP6ZN3fzFZbZyrHy/Z
 WdREW1SFhprjrhMK7AfZQ+27nHBSTFl9rpw/+3MN3E46aK7sjGbXJf2HOMf8k01Z
 sU173UEd8ZPy80HCTUR4gbTyKAzlwcyp4oVAnq5rwj4Zrn9uMRIzVLpXQhbKovyU
 i3KDOYkNrb0rbMriotuIzeDyY8/OC8JBB73bUNsSrH1S8gj4tq5KPidjjF5kViIN
 xXKiTPlkFd3BhDzBBx4Yk53tKLD9YqI1iup2jNzZR0EthQHo5xM0eArHlP9x+052
 F29VsH1NZPIYTDK6//uXMwKSNdFiXWoH1RKl4W41Gq3k1NEC6covwoZR1nE4QG9+
 TnTPKK6XAqM1whtwCzWRm07Hasy8ov4PdwqmYrvTKXVXMAT0NvsBHzKw2/j1etnc
 pwFEQBK8scEEkiE4Pa9l
 =7RFO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20200207-pull-request' into staging

audio: bugfixes, mostly audio backend rewrite fallout

# gpg: Signature made Fri 07 Feb 2020 07:45:44 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20200207-pull-request:
  audio: proper support for float samples in mixeng
  coreaudio: fix coreaudio playback
  audio/dsound: fix invalid parameters error
  audio: audio_generic_get_buffer_in should honor *size
  ossaudio: disable poll mode can't be reached
  ossaudio: prevent SIGSEGV in oss_enable_out
  audio: fix bug 1858488
  audio: prevent SIGSEGV in AUD_get_buffer_size_out
  paaudio: remove unused variables
  audio: fix audio_generic_read
  audio: fix audio_generic_write
  audio/oss: fix buffer pos calculation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-07 13:42:09 +00:00
Kővágó, Zoltán
ed2a4a7941 audio: proper support for float samples in mixeng
This adds proper support for float samples in mixeng by adding a new
audio format for it.

Limitations: only native endianness is supported.  None of the virtual
sound cards support float samples (it looks like most of them only
support 8 and 16 bit, only hda supports 32 bit), it is only used for the
audio backends (i.e. host side).

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 8a8b0b5698401b78d3c4c8ec90aef83b95babb06.1580672076.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-02-06 14:35:57 +01:00
Eric Blake
deb6ccb077 nbd: Allow description when creating NBD blockdev
Allow blockdevs to match the feature already present in qemu-nbd -D.
Enhance iotest 223 to cover it.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191114024635.11363-5-eblake@redhat.com>
2020-02-05 17:22:13 -06:00
Stefan Berger
3676bc69b3 tpm_spapr: Support TPM for ppc64 using CRQ based interface
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with the external
swtpm.

The Linux vTPM driver for ppc64 works with this emulation.

This TPM emulator also handles the TPM 2 case.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com>
[dwg: Use device_class_set_props(), tweak Kconfig]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02 14:07:57 +11:00
Aarushi Mehta
f14beaecaf qapi/block-core: add option for io_uring
Since io_uring is the actual name of the Linux API, we use it as enum
value even though the QAPI schema conventions would prefer io-uring.

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-3-stefanha@redhat.com
Message-Id: <20200120141858.587874-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 20:59:41 +00:00
Marc-André Lureau
1bb3d7d92c qapi/qmp: add ObjectPropertyInfo.default-value
Report the default value associated with a property.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-26-marcandre.lureau@redhat.com>
[Report it as type "any", not string. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:16 +01:00
zhenwei pi
7dc58deea7 pvpanic: implement crashloaded event handling
Handle bit 1 write, then post event to monitor.

Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.

In advance for extention, add GuestPanicInformation in event message.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:07 +01:00
Markus Armbruster
00ca24ff9e qapi: Generate command registration stuff into separate files
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal.  Generate it into separate files.  This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-01-14 11:01:58 +01:00
Peter Maydell
973d306dd6 virtio, pci, pc: fixes, features
Bugfixes all over the place.
 HMAT support.
 New flags for vhost-user-blk utility.
 Auto-tuning of seg max for virtio storage.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
 S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
 lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
 I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
 uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
 r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
 =uL1o
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci, pc: fixes, features

Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (32 commits)
  intel_iommu: add present bit check for pasid table entries
  intel_iommu: a fix to vtd_find_as_from_bus_num()
  virtio-net: delete also control queue when TX/RX deleted
  virtio: reset region cache when on queue deletion
  virtio-mmio: update queue size on guest write
  tests: add virtio-scsi and virtio-blk seg_max_adjust test
  virtio: make seg_max virtqueue size dependent
  hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
  vhost-user-scsi: reset the device if supported
  vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
  hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
  hw/pci/pci_host: Remove redundant PCI_DPRINTF()
  virtio-mmio: Clear v2 transport state on soft reset
  ACPI: add expected files for HMAT tests (acpihmat)
  tests/bios-tables-test: add test cases for ACPI HMAT
  tests/numa: Add case for QMP build HMAT
  hmat acpi: Build Memory Side Cache Information Structure(s)
  hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
  hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
  numa: Extend CLI to provide memory side cache information
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07 16:25:00 +00:00
Andrey Shinkevich
f41388e0fb block: introduce compress filter driver
Allow writing all the data compressed through the filter driver.
The written data will be aligned by the cluster size.
Based on the QEMU current implementation, that data can be written to
unallocated clusters only. May be used for a backup job.

Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1575288906-551879-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Replace NULL bdrv_get_format_name() by "(no format)"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-06 13:43:07 +01:00
Max Reitz
69c6449ff1 blkdebug: Allow taking/unsharing permissions
Sometimes it is useful to be able to add a node to the block graph that
takes or unshare a certain set of permissions for debugging purposes.
This patch adds this capability to blkdebug.

(Note that you cannot make blkdebug release or share permissions that it
needs to take or cannot share, because this might result in assertion
failures in the block layer.  But if the blkdebug node has no parents,
it will not take any permissions and share everything by default, so you
can then freely choose what permissions to take and share.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191108123455.39445-4-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-06 13:43:06 +01:00
Liu Jingqi
c412a48d4d numa: Extend CLI to provide memory side cache information
Add -numa hmat-cache option to provide Memory Side Cache Information.
These memory attributes help to build Memory Side Cache Information
Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
Before using hmat-cache option, enable HMAT with -machine hmat=on.

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-4-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05 07:03:03 -05:00
Liu Jingqi
9b12dfa03a numa: Extend CLI to provide memory latency and bandwidth information
Add -numa hmat-lb option to provide System Locality Latency and
Bandwidth Information. These memory attributes help to build
System Locality Latency and Bandwidth Information Structure(s)
in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using
hmat-lb option, enable HMAT with -machine hmat=on.

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-3-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05 07:03:03 -05:00
Tao Xu
244b3f4485 numa: Extend CLI to provide initiator information for numa nodes
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT),
The initiator represents processor which access to memory. And in 5.2.27.3
Memory Proximity Domain Attributes Structure, the attached initiator is
defined as where the memory controller responsible for a memory proximity
domain. With attached initiator information, the topology of heterogeneous
memory can be described. Add new machine property 'hmat' to enable all
HMAT specific options.

Extend CLI of "-numa node" option to indicate the initiator numa node-id.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables. Before using initiator option, enable HMAT with
-machine hmat=on.

Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-2-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05 07:03:03 -05:00
Daniel P. Berrangé
ecaf647f30 qapi: better document NVMe blockdev @device parameter
Mention that this is a PCI device address & give the format it is
expected in. Also mention that it must be first unbound from any
host kernel driver.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-18 11:20:57 +01:00
Eric Blake
cf7c49cf6a bitmap: Enforce maximum bitmap name length
We document that for qcow2 persistent bitmaps, the name cannot exceed
1023 bytes.  It is inconsistent if transient bitmaps do not have to
abide by the same limit, and it is unlikely that any existing client
even cares about using bitmap names this long.  It's time to codify
that ALL bitmaps managed by qemu (whether persistent in qcow2 or not)
have a documented maximum length.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-3-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-11-18 16:01:34 -06:00
Andrew Jones
e19afd5667 target/arm/monitor: Introduce qmp_query_cpu_model_expansion
Add support for the query-cpu-model-expansion QMP command to Arm. We
do this selectively, only exposing CPU properties which represent
optional CPU features which the user may want to enable/disable.
Additionally we restrict the list of queryable cpu models to 'max',
'host', or the current type when KVM is in use. And, finally, we only
implement expansion type 'full', as Arm does not yet have a "base"
CPU type. More details and example queries are described in a new
document (docs/arm-cpu-features.rst).

Note, certainly more features may be added to the list of advertised
features, e.g. 'vfp' and 'neon'. The only requirement is that we can
detect invalid configurations and emit failures at QMP query time.
For 'vfp' and 'neon' this will require some refactoring to share a
validation function between the QMP query and the CPU realize
functions.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01 08:49:10 +00:00
Jens Freimann
c7e0acd5a3 migration: add new migration state wait-unplug
This patch adds a new migration state called wait-unplug.  It is entered
after the SETUP state if failover devices are present. It will transition
into ACTIVE once all devices were succesfully unplugged from the guest.

So if a guest doesn't respond or takes long to honor the unplug request
the user will see the migration state 'wait-unplug'.

In the migration thread we query failover devices if they're are still
pending the guest unplug. When all are unplugged the migration
continues. If one device won't unplug migration will stay in wait_unplug
state.

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191029114905.6856-9-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29 18:55:26 -04:00
Jens Freimann
70d04971f1 qapi: add failover negotiated event
This event is sent to let libvirt know that VIRTIO_NET_F_STANDBY feature
is enabled. The primary device this virtio-net (standby) device is
associated with, is now hotplugged by the virtio-net device.

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-7-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2019-10-29 18:55:26 -04:00
Jens Freimann
d328e6f372 qapi: add unplug primary event
This event is emitted when we sent a request to unplug a
failover primary device from the Guest OS and it includes the
device id of the primary device.

Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191029114905.6856-6-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2019-10-29 18:55:26 -04:00
Markus Armbruster
bf83f04e13 qapi: Fix doc comment checking for commands and events
When a command's 'data' is an object, its doc comment describes the
arguments defined there.  When 'data' names a type, the doc comment
does not describe arguments.  Instead, the doc generator inserts a
pointer to the named type.

An event's doc comment works the same.

We don't actually check doc comments for commands and events.
Instead, QAPISchema._def_command() forwards the doc comment to the
implicit argument type, where it gets checked.  Works because the
check only cares for the implicit argument type's members.

Not only is this needlessly hard to understand, it actually falls
apart in two cases:

* When 'data' is empty, there is nothing to forward to, and the doc
  comment remains unchecked.  Demonstrated by test doc-bad-event-arg.

* When 'data' names a type, we can't forward, as the type has its own
  doc comment.  The command or event's doc comment remains unchecked.
  Demonstrated by test doc-bad-boxed-command-arg.

The forwarding goes back to commit 069fb5b250 "qapi: Prepare for
requiring more complete documentation", put to use in commit
816a57cd6e "qapi: Fix detection of bogus member documentation".  That
fix was incomplete.

To fix this, make QAPISchemaCommand and QAPISchemaEvent check doc
comments, and drop the forwarding of doc comments to implicit argument
types.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-12-armbru@redhat.com>
2019-10-29 07:35:16 +01:00
Pavel Dovgalyuk
35e32d9e2e qapi: add support for blkreplay driver
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name

This option makes possible implementation of the better command
line support for record/replay invocations.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-25 15:15:01 +02:00
Peter Krempa
5f76a7aac1 qapi: Allow introspecting fix for savevm's cooperation with blockdev
'savevm' was buggy as it considered all monitor-owned block device
nodes for snapshot. With the introduction of -blockdev, the common
usage made all nodes including protocol and backing file nodes be
monitor-owned and thus considered for snapshot.

This is a problem since the 'file' protocol nodes can't have internal
snapshots and it does not make sense to take snapshot of nodes
representing backing files.

This was fixed by commit 05f4aced65. Clients need to be able to
detect whether this fix is present.

Since savevm does not have an QMP alternative, add the feature for the
'human-monitor-command' backdoor which is used to call this command in
modern use.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-6-armbru@redhat.com>
2019-10-22 13:54:14 +02:00
Peter Krempa
23394b4c39 qapi: Add feature flags to commands
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.

The changes were heavily inspired by commit 6a8c0b5102.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
2019-10-22 13:54:13 +02:00
Peter Maydell
e9d4246192 audio: bugfixes, pa connection and stream naming.
audio: 5.1/7.1 support for alsa, pa and usb-audio.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdqWymAAoJEEy22O7T6HE4xkwP/RMd2YrNeTpeBHOII6DF/o0S
 AFY7V8L1sEsvjBpEGwcOWs5Jf9ByRbxkq41w6g5RqzKIHp5kT5dtlRQ1oc4Efg+x
 AK/UGbyNTyp2hmQY6FO6MDMgq8ZgqNaBLvlTr6ZxxIrIoKUWN3jE3wwjnQsuDSv7
 RcD8L891km4W4yxhpAVsT2a/6yOAsqKR0h3lgVWvsF+ugsIa3Ip72FehCL95VbGs
 TbdyWIv75ibkZXIZxTIQjxAEHrv9tkQU8slSNFZKZDamCSrlPyVQBfaHksV+4DQV
 SWana1NB1xu2ZLsBcbDnsWWqsBtK0zWmzJ6Y+Gurfsq2981BAP8yw0xZ90g3bFFB
 vaDcDly+b/4v7UNLKtl2ArzC3vjQS4djuOExgs5s6rcmWfYHw9fYor4MzIvTDnD3
 KkPUrmxOCKD8MtL5XAXadxUS9GK3A5MD1UOIoe8WI/cNQAZhWLM1ofEh//341VAP
 tvkQfCF4mqW/1Rz+p6Vp0Ra3FG5+wVXTL9M8yW6ztD7GPUaw9ANoSXk9xTJa5EY5
 760l5WrNVdFMQxxl+M82aI3/GT3O/bE3Gz5FCjf7JoigIZKG6gKphNFxJySsypxV
 xXoMmE+6P4VoT3g7FfJ5yf9rksCt6Pn5ryx//AQPSuyGF21vF/zNfH98XycXf6ma
 H5JDtM9kEphMQrLxE5LN
 =pQ+6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20191018-pull-request' into staging

audio: bugfixes, pa connection and stream naming.
audio: 5.1/7.1 support for alsa, pa and usb-audio.

# gpg: Signature made Fri 18 Oct 2019 08:41:26 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20191018-pull-request:
  paaudio: fix channel order for usb-audio 5.1 and 7.1 streams
  usbaudio: change playback counters to 64 bit
  usb-audio: support more than two channels of audio
  usb-audio: do not count on avail bytes actually available
  audio: basic support for multichannel audio
  audio: replace shift in audio_pcm_info with bytes_per_frame
  audio: support more than two channels in volume setting
  paaudio: get/put_buffer functions
  audio: make mixeng optional
  audio: add mixing-engine option (documentation)
  audio: paaudio: ability to specify stream name
  audio: paaudio: fix connection and stream name
  audio: fix parameter dereference before NULL check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-18 14:13:11 +01:00
Kővágó, Zoltán
8efac073a5 audio: add mixing-engine option (documentation)
This will allow us to disable mixeng when we use a decent backend.

Disabling mixeng have a few advantages:
* we no longer convert the audio output from one format to another, when
  the underlying audio system would just convert it to a third format.
  We no longer convert, only the underlying system, when needed.
* the underlying system probably has better resampling and sample format
  converting methods anyway...
* we may support formats that the mixeng currently does not support (S24
  or float samples, more than two channels)
* when using an audio server (like pulseaudio) different sound card
  outputs will show up as separate streams, even if we use only one
  backend

Disadvantages:
* audio capturing no longer works (wavcapture, and vnc audio extension)
* some backends only support a single playback stream or very picky
  about the audio format.  In this case we can't disable mixeng.

Originally thw two main use cases of the disabled option was: using
unsupported audio formats (5.1 and 7.1 audio) and having different
pulseaudio streams per audio frontend.  Since we can have multiple
-audiodevs, the latter is not that important, so currently you only need
this option if you want to use 5.1 or 7.1 audio (implemented in a later
patch), otherwise it's probably better to stick to the old and tried
mixeng, since it's less picky about the backends.

The ideal solution would be to port as much as possible to gstreamer,
but this is currently out of scope:
https://wiki.qemu.org/Internships/ProjectIdeas/AudioGStreamer

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 5765186a7aadd51a72bc7d3e804307f0ee8a34ce.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-18 08:14:05 +02:00
Kővágó, Zoltán
f47dffe8d1 audio: paaudio: ability to specify stream name
This can be used to identify stream in tools like pavucontrol when one
creates multiple -audiodevs or runs multiple qemu instances.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 2d6e337c474ac84172d0809e6959c26b21d48120.1568157545.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-18 07:50:53 +02:00
John Snow
3264ffced3 dirty-bitmaps: remove deprecated autoload parameter
This parameter has been deprecated since 2.12.0 and is eligible for
removal. Remove this parameter as it is actually completely ignored;
let's not give false hope.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191002232411.29968-1-jsnow@redhat.com
2019-10-17 17:53:28 -04:00
Vladimir Sementsov-Ogievskiy
00e30f05de block/backup: use backup-top instead of write notifiers
Drop write notifiers and use filter node instead.

= Changes =

1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.

2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.

3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.

4. Block-copy is now using BdrvChildren instead of BlockBackends

5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.

= Iotest changes =

56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.

Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.

141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.

257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Anton Nefedov
d924559953 qapi: query-blockstat: add driver specific file-posix stats
A block driver can provide a callback to report driver-specific
statistics.

file-posix driver now reports discard statistics

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Anton Nefedov
159f85ddc8 qapi: add unmap to BlockDeviceStats
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Anton Nefedov
329d27e38c qapi: group BlockDeviceStats fields
Make the stat fields definition slightly more readable.
Also reorder total_time_ns stats read-write-flush as done elsewhere.
Cosmetic change only.

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-2-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Markus Armbruster
638c4af931 qapi: Clean up member name case checking
QAPISchemaMember.check_clash() checks for member names that map to the
same c_name().  Takes care of rejecting duplicate names.

It also checks a naming rule: no uppercase in member names.  That's a
rather odd place to do it.  Enforcing naming rules is
check_name_str()'s job.

qapi-code-gen.txt specifies the name case rule applies to the name as
it appears in the schema.  check_clash() checks c_name(name) instead.
No difference, as c_name() leaves alone case, but unclean.

Move the name case check into check_name_str(), less the c_name().
New argument @permit_upper suppresses it.  Pass permit_upper=True for
definitions (which are not members), and when the member's owner is
whitelisted with pragma name-case-whitelist.

Bonus: name-case-whitelist now applies to a union's inline base, too.
Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead
of CpuInfo's implicit base type's name q_obj_CpuInfo-base.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-6-armbru@redhat.com>
2019-09-28 17:17:18 +02:00
Michal Privoznik
2546be1c85 qmp-dispatch: Use CommandNotFound error for disabled commands
If a command is disabled an error is reported.  But due to usage of
error_setg() the class of the error is GenericError which does not
help callers in distinguishing this case from a case where a qmp
command fails regularly due to other reasons.

We used to use class CommandDisabled until the great error
simplification (commit de253f1491 for QMP and commit 93b91c59db for
qemu-ga, both v1.2.0).

Use CommandNotFound error class, which is close enough.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test update squashed in, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-09-28 16:51:30 +02:00
Andrey Shinkevich
863f195fa8 make check-unit: use after free in test-opts-visitor
In the struct OptsVisitor, the 'repeated_opts' member points to a list
in the 'unprocessed_opts' hash table after the list has been destroyed.
A subsequent call to visit_type_int() references the deleted list.
It results in use-after-free issue reproduced by running the test case
under the Valgrind: valgrind tests/test-opts-visitor.
A new mode ListMode::LM_TRAVERSED is declared to mark the list
traversal completed.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1565024586-387112-1-git-send-email-andrey.shinkevich@virtuozzo.com>
2019-09-24 11:03:44 +02:00
Philippe Mathieu-Daudé
31e404151b cutils: Move size_to_str() from "qemu-common.h" to "qemu/cutils.h"
"qemu/cutils.h" contains various qemu_strtosz_*() functions
useful to convert strings to size. It seems natural to have
the opposite usage (from size to string) there too.

The function definition is already in util/cutils.c.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190903120555.7551-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-19 11:57:34 +02:00
Yury Kotov
b9d68df62a migration: Add validate-uuid capability
This capability realizes simple source validation by UUID.
It's useful for live migration between hosts.

Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12 11:19:23 +01:00
Daniel P. Berrangé
04109957d4 qapi: report the default CPU type for each machine
When user doesn't request any explicit CPU model with libvirt or QEMU,
a machine type specific CPU model is picked. Currently there is no way
to determine what this QEMU built-in default is, so libvirt cannot
report this back to the user in the XML config.

This extends the "query-machines" QMP command so that it reports the
default CPU model typename for each machine.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190822100412.23746-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Peter Maydell
d86766a9d0 curses: assert get_wch return value is okay
input-linux: add shift+shift as a grab toggle
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdXh0IAAoJEEy22O7T6HE4q7oP/iFa30rrobnmIJx9iUpZdM5k
 PMorSipenRUxr8FCPUDTk+vPRX8ZusnCoqx2OI/nn6R2jhXQyk/NNbCK55M8HGLL
 Iu3KFata4R0PkSlIcwvXg8knwLZv+7M4jWGhjKyNfsmpXS1niqAEHZoHty2/nR6+
 3aKfsHhNiSV0VeAEfrJwj/o0kWgDNtTffxIiOBvdQRDblMsV56vsjzKhlEoeA2zk
 krgkUAUWgRmHIVHHr1eky35v7N8qFK8/h/0DrHnvEhdEnMnNkthgZ2cJqSrKEFbU
 sxvigmTDo5/cmVqWeBxgq/MhEXMr804DxAShMj7RQ9qr5KBixB1g/m1iRWwIPOEV
 EgDqhJ2ugthp3/96imlJviHnq1Yl1YLye+Keh12P30zN24jXf7RaCEaZM4UZYTmM
 8FzlDmeMELI+ZlgXbXPgcPrIiiNXi0O+Gb9AhYr82hE0bS3UZuWwSzJjf3I6tu13
 3TlujdRBE67w0sBy+qwLeEBgrXZcmbdi3pLvrTxA06PCxBgaLTYfv+dpUCzj5YYQ
 9RomjmyFBVDWV5t+TZQNswiFaJLPsjyBx11buLwikyhfPf0z1RzO2G3vlNAYej9b
 7jdgU9fq1W0YD7gNooXlF24dCwx7OAQd1czw24flP7bgXJCDPcJ+C4TmjwnqkLsn
 +UEo2iZE3A1495KU0B0T
 =m5o3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190822-pull-request' into staging

curses: assert get_wch return value is okay
input-linux: add shift+shift as a grab toggle

# gpg: Signature made Thu 22 Aug 2019 05:41:44 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190822-pull-request:
  input-linux: add shift+shift as a grab toggle
  curses: assert get_wch return value is okay

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 14:16:42 +01:00
Markus Armbruster
ffaee83bcb qapi: Move query-target from misc.json to machine.json
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core".  Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.

All users of SysEmuTarget are now in machine.json.  Move it there from
common.json.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
2019-08-21 13:24:01 +02:00
Niklas Haas
a923b471fc input-linux: add shift+shift as a grab toggle
We have ctrl-ctrl and alt-alt; why not shift-shift? That's my preferred
grab binding, personally.

Signed-off-by: Niklas Haas <git@haasn.xyz>
Message-id: 20190818105038.19520-1-qemu@haasn.xyz
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 12:25:46 +02:00
Max Reitz
fa27c47810 doc: Preallocation does not require writing zeroes
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.

As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while.  It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19 17:13:26 +02:00
Maxim Levitsky
672de729a1 LUKS: support preallocation
preallocation=off and preallocation=metadata
both allocate luks header only, and preallocation=falloc/full
is passed to underlying file.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1534951

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190716161901.1430-1-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19 17:13:26 +02:00
Vladimir Sementsov-Ogievskiy
590a63d598 qapi: add dirty-bitmaps to query-named-block-nodes result
Let's add a possibility to query dirty-bitmaps not only on root nodes.
It is useful when dealing both with snapshots and incremental backups.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190717173937.18747-1-jsnow@redhat.com
[Added deprecation information. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
[Fixed spelling --js]
2019-08-16 18:29:43 -04:00
John Snow
1a2b8b406b block/backup: support bitmap sync modes for non-bitmap backups
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.

Some combinations don't make sense, though:

- NEVER policy combined with any non-BITMAP mode doesn't do anything,
  because the bitmap isn't used for input or output.
  It's harmless, but is almost certainly never what the user wanted.

- sync=NONE is more questionable. It can't use on-success because this
  job never completes with success anyway, and the resulting artifact
  of 'always' is suspect: because we start with a full bitmap and only
  copy out segments that get written to, the final output bitmap will
  always be ... a fully set bitmap.

  Maybe there's contexts in which bitmaps make sense for sync=none,
  but not without more severe changes to the current job, and omitting
  it here doesn't prevent us from adding it later.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 18:29:43 -04:00
John Snow
c4e4b0fa59 qapi: implement block-dirty-bitmap-remove transaction action
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:03 -04:00
John Snow
c23909e530 block/backup: add 'always' bitmap sync policy
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.

In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
cf0cd293c6 block/backup: add 'never' policy to bitmap sync mode
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
c8b5650178 block/backup: Add mirror sync mode 'bitmap'
We don't need or want a new sync mode for simple differences in
semantics.  Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.

Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.

Add all of the plumbing necessary to support this new instruction.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
00a463b1dc qapi: add BitmapSyncMode enum
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.

I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.

The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
3c95037aa8 qapi/block-core: Introduce BackupCommon
drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.

I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.

Where documentation was not identical, use the most up-to-date version.
For "speed", use Blockdev-Backup's version. For "sync", use
Drive-Backup's version.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[Maintainer edit: modified commit message. --js]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:01 -04:00