AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Send raw packets over if UADK hardware support is not available. This is to
satisfy Qemu qtest CI which may run on platforms that don't have UADK
hardware support. Subsequent patch will add support for uadk migration
qtest.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Initialize UADK session and allocate buffers required. The actual
compression/decompression will only be done in a subsequent patch.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add --enable-uadk and --disable-uadk options to enable and disable
UADK compression accelerator. This is for using UADK based hardware
accelerators for live migration.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Document UADK(User Space Accelerator Development Kit) library details
and how to use that for migration.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[s/Qemu/QEMU in docs]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add qpl to compression method test for multifd migration
the qpl compression supports software path and hardware
path(IAA device), and the hardware path is used first by
default. If the hardware path is unavailable, it will
automatically fallback to the software path for testing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
QPL compression and decompression will use IAA hardware path if the IAA
hardware is available. Otherwise the QPL library software path is used.
The hardware path will automatically fall back to QPL software path if
the IAA queues are busy. In some scenarios, this may happen frequently,
such as configuring 4 channels but only one IAA device is available. In
the case of insufficient IAA hardware resources, retry and fallback can
help optimize performance:
1. Retry + SW fallback:
total time: 14649 ms
downtime: 25 ms
throughput: 17666.57 mbps
pages-per-second: 1509647
2. No fallback, always wait for work queues to become available
total time: 18381 ms
downtime: 25 ms
throughput: 13698.65 mbps
pages-per-second: 859607
If both the hardware and software paths fail, the uncompressed page is
sent directly.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
during initialization, a software job is allocated to each channel
for software path fallabck when the IAA hardware is unavailable or
the hardware job submission fails. If the IAA hardware is available,
multiple hardware jobs are allocated for batch processing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add the Query Processing Library (QPL) compression method
Introduce the qpl as a new multifd migration compression method, it can
use In-Memory Analytics Accelerator(IAA) to accelerate compression and
decompression, which can not only reduce network bandwidth requirement
but also reduce host compression and decompression CPU overhead.
How to enable qpl compression during migration:
migrate_set_parameter multifd-compression qpl
There is no qpl compression level parameter added since it only supports
level one, users do not need to specify the qpl compression level.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
[fixed docs spacing in migration.json]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add --enable-qpl and --disable-qpl options to enable and disable
the QPL compression method for multifd migration.
The Query Processing Library (QPL) is an open-source library
that supports data compression and decompression features. It
is based on the deflate compression algorithm and use Intel
In-Memory Analytics Accelerator(IAA) hardware for compression
and decompression acceleration.
For more live migration with IAA, please refer to the document
docs/devel/migration/qpl-compression.rst
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Different compression methods may require different numbers of IOVs.
Based on streaming compression of zlib and zstd, all pages will be
compressed to a data block, so two IOVs are needed for packet header
and compressed data block.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Similar to other archs, build a custom bios memory updater. Running the
test with OF code is a cool trick, but SLOF takes a long time to boot.
This reduces test time by around 3x (150s to 50s).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
ppc64 with TCG seems to no longer be failing this test, perhaps since
commit 03bfc2188f ("physmem: Fix migration dirty bitmap coherency
with TCG memory access") which is not ppc specific but was seen to hit
ppc64 quite easily.
Let's enable it again.
The s390x problem has been identified so mention it while we are
adjusting the comment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The spapr QEMU machine defaults is useful outside libqos, so create a
new header for ppc specific qtests and move it there.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
-----BEGIN PGP SIGNATURE-----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=s7+V
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu into staging
* Fix loongarch64 avocado test
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmZpoEoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVF6g/+JYTRKmaIduQIP9g2+NkM+qMTbjI9Ow47
# 8Vdj/ePMXNWOZsgMPkCUdisYeMZEC+XMcDN1xvwZXwLTMTJRacZCSFRpeN4P0m0W
# 6aQ28+tPNgx+B9Eh2kc4TpxbiqSH8u5u4GEN4Y07rcX/3YbYyjFgZD8orRu/nJ+H
# 0wV7Riq9csi1BkLxrgKaHocFSOl4eOga4OFi+u4wIn/xoW3MN0laxe4iuoQRMZPf
# gJLPRhEija4lto8iIKNxJbTABB0wEcWRWtgqcbHxdatqh1lPTPBpWxmdD/v1LJn+
# H/eO+oh05NQdlhw7+xfWF9PD+MpIePbZ28oNb3X3uURROTdcxpBAgpPipv07FsT4
# LmU2nIBQ4FcpDOkhLnLmBmFBNO6uDCzuGzxFRhX1SIiGMABqTDOKynBQSgQI2iB0
# 5J47XUwHtnOoCvf4SRA/MZG8zNSQZdJbnuOBLgZ+vsCG14mWM2NbfSUwRkH6pd/J
# fEbODuzHZoYgUTxjR9+WMbINAbNjMy+SP2sGZIBzcAIIkybKynOy58LoCyNT684U
# ean9bnc65908PJxEfsQ6k9kNwkK4GwOqZi+X383nVgMJ9+3dDw8M76IVU59hsq1n
# wnz4VgFcRdXMYhj9zghaCgH2Ezw8gZHILXH+RlX0Bav4LQ5vSZQ6tRNwM4+rfXBe
# okF1Sxmz31U=
# =s7+V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Jun 2024 06:19:06 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Allow specifying extra QEMU options on the command line
tests/unit/test-smp-parse: Test the full 8-levels topology hierarchy
tests/unit/test-smp-parse: Test "modules" and "dies" combination case
tests/unit/test-smp-parse: Test "modules" parameter in -smp
tests/unit/test-smp-parse: Make test cases aware of module level
tests/unit/test-smp-parse: Use default parameters=0 when not set in -smp
tests/unit/test-smp-parse: Fix an invalid topology case
tests/unit/test-smp-parse: Fix comment of parameters=1 case
tests/unit/test-smp-parse: Fix comments of drawers and books case
test: Remove libibumad dependence
meson: Remove libibumad dependence
tests/qtest/x86: check for availability of older cpu models before running tests
tests/qtest/libqtest: add qtest_has_cpu_model() api
qtest/x86/numa-test: do not use the obsolete 'pentium' cpu
tests/avocado: Update LoongArch bios file
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The use case for this is `make check-tcg EXTFLAGS="-accel kvm"`,
which allows validating the system TCG testcases on real hardware.
EXTFLAGS name is borrowed from tests/tcg/xtensa/Makefile.softmmu-target.
While at it, use += instead of = in order to be consistent with the
other architectures.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522184116.35975-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With module level, QEMU now support 8-levels topology hierarchy.
Cover "modules" in SMP_CONFIG_WITH_FULL_TOPO related cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-9-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since i386 PC machine supports both "modules" and "dies" in -smp, add the
"modules" and "dies" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-8-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cover the module cases in test-smp-parse.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, -smp supports module level.
It is necessary to consider the effects of module in the test cases to
ensure that the calculations are correct. This is also the preparation
to add module test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-6-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since -smp allows parameters=1 whether the level is supported by
machine, to avoid the test scenarios where the parameter defaults to 1
cause some errors to be masked, explicitly set undesired parameters to
0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Adjust the "cpus" parameter to match the comment configuration.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-4-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SMP_CONFIG_WITH_FULL_TOPO hasn't support module level, so the parameter
should indicate the "clusters".
Additionally, reorder the parameters of -smp to match the topology
hierarchy order.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-3-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix the comments to match the actual configurations.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-2-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove libibumad dependence from the test environment.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240611105427.61395-3-pizhenwei@bytedance.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
RDMA based migration has no dependence on libumad. libibverbs and
librdmacm are enough.
libumad was used by rdmacm-mux which has been already removed. It's
remained mistakenly.
Fixes: 1dfd42c426 ("hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper")
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240611105427.61395-2-pizhenwei@bytedance.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is better to check if some older cpu models like 486, athlon, pentium,
penryn, phenom, core2duo etc are available before running their corresponding
tests. Some downstream distributions may no longer support these older cpu
models.
Signature of add_feature_test() has been modified to return void as
FeatureTestArgs* was not used by the caller.
One minor correction. Replaced 'phenom' with '486' in the test
'x86/cpuid/auto-level/phenom/arat' matching the cpu used.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-4-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added a new test api qtest_has_cpu_model() in order to check availability of
some cpu models in the current QEMU binary. The specific architecture of the
QEMU binary is selected using the QTEST_QEMU_BINARY environment variable.
This api would be useful to run tests against some older cpu models after
checking if QEMU actually supported these models.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-3-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'pentium' cpu is old and obsolete and should be avoided for running tests if
its not strictly needed. Use 'max' cpu instead for generic non-cpu specific
numa test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20240610155303.7933-2-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The VM uses old bios to boot up only 1 cpu, causing the test case to fail.
Update the bios to solve this problem.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240604030058.2327145-1-gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Events aren't designed to be multi-lines. Multiple events
can be used instead. Prevent that format using multi-lines
by forbidding the newline character.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-6-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Trace events aren't designed to be multi-lines.
Remove the newline characters.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-5-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Trace events aren't designed to be multi-lines.
Remove the newline characters.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-4-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Trace events aren't designed to be multi-lines. Remove
the newline character which doesn't bring much value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-3-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split the 'tpm_util_show_buffer' event in two to avoid
using a newline character.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20240606103943.79116-2-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vcpu.py is pointless since commit 89aafcf2a7 ("trace:
remove code that depends on setting vcpu"), remote it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240606102631.78152-1-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The n_threads argument is no longer used since the previous commit.
Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ciphers are pre-allocated by qcrypto_block_init_cipher() depending on
the given number of threads. The -device
virtio-blk-pci,iothread-vq-mapping= feature allows users to assign
multiple IOThreads to a virtio-blk device, but the association between
the virtio-blk device and the block driver happens after the block
driver is already open.
When the number of threads given to qcrypto_block_init_cipher() is
smaller than the actual number of threads at runtime, the
block->n_free_ciphers > 0 assertion in qcrypto_block_pop_cipher() can
fail.
Get rid of qcrypto_block_init_cipher() n_thread's argument and allocate
ciphers on demand.
Reported-by: Qing Wang <qinwang@redhat.com>
Buglink: https://issues.redhat.com/browse/RHEL-36159
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Libaio defines IO_CMD_FDSYNC command to sync all outstanding
asynchronous I/O operations, by flushing out file data to the
disk storage. Enable linux-aio to submit such aio request.
When using aio=native without fdsync() support, QEMU creates
pthreads, and destroying these pthreads results in TLB flushes.
In a real-time guest environment, TLB flushes cause a latency
spike. This patch helps to avoid such spikes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240425070412.37248-1-ppandit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
