We previously allocated 32-bits per temp for the next_free_temp entry.
We now allocate 4 bits per temp across the 4 bitmaps.
Using a linked list meant that if a translator is tweeked, resulting in
temps being freed in a different order, that would have follow-on effects
throughout the TB. Always allocating the lowest free temp means that
follow-on effects are minimized, which can make it easier to diff output
when debugging the translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
No need to set up a SIGILL signal handler for detection anymore.
Remove a ton of sanity checks that must be true, given that we're
requiring a 64-bit build (the note about 31-bit KVM is satisfied
by configuring with TCI).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow host detection on linux systems without glibc 2.16 or later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow host detection on linux systems without glibc 2.16 or later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can and/or/xor/andcm small constants, saving one cycle.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids a wasted cycle loading up small constants.
Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since the move away from the global areg0, we're no longer globally
reserving areg0. Which means our use of R7 clobbers a call-saved
register. Shift areg0 into the windowed registers. Indeed, choose
the incoming parameter register that it comes to us by.
This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare. This lead to
the usage of an extra bundle in which to perform the compare. The extra
bundle left room for constants to be loaded for use with the compare insn.
If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants. At which point we
can eliminate half the function by not handling them.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits. By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to go through the full opcode-to-insn function call
to generate nops. This makes the source a bit more readable.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If we pull the code to emit the actual load/store into a subroutine,
we can share the reg+reg addressing mode code between softmmu and
usermode. This lets us load GUEST_BASE into a temporary register
rather than attempting to add it piece-wise to the address.
Which lets us use movw+movt for armv7, rather than (up to) 4 adds.
Code size for pre-armv7 stays the same.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Once we form a combined qemu_st_i32 opcode, we won't be able to
have separate constraints based on size. This one is fairly easy
to work around, since eax is available as a scratch register.
When storing variable data, this tends to merely exchange one mov
for another. E.g.
-: mov %esi,%ecx
...
-: mov %cl,(%edx)
+: mov %esi,%eax
+: mov %al,(%edx)
Where we do have a regression is when storing constant data, in which
we may load the constant into edi, when only ecx/ebx ought to be used.
The proper way to recover this regression is to allow constants as
arguments to qemu_st_i32, so that we never load the constant data into
a register at all, must less the wrong register. TBD.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pass two TCGReg to tcg_out_tlb_load, rather than idx+args.
Move ldst_optimization routines just below tcg_out_tlb_load to avoid
the need for forward declarations.
Use TCGReg enum in preference to int where apprpriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Step three in the transition: helpers not tied to the target
"default" endianness. To be used when the guest uses a memory
operation with non-default endianness.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Step two in the transition, adding the new ldst opcodes. Keep the old
opcodes around until all backends support the new opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is a no-op backend data implementation, for those targets that
are not currently using the load/store optimization path.
This is prepatory to always requiring these functions in all backends.
Signed-off-by: Richard Henderson <rth@twiddle.net>
A minimal update to use the new helpers with the return address argument.
Tested-by: Claudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the few targets that actually use these, we'd not report
them symbolicly in the tcg opcode logs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
One call inside of a loop to tcg_register_helper instead of hundreds
of sequential calls.
Presumably more icache and branch prediction friendly; resulting binary
size mostly unchanged on x86_64, as we're trading 32-bit rip-relative
references in .text for full 64-bit pointers in .rodata.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Slightly changes the interface, in that we now return name
instead of a TCGHelperInfo structure, which goes away.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-arm-pull:
tcg-arm: Move the tlb addend load earlier
tcg-arm: Remove restriction on qemu_ld output register
tcg-arm: Return register containing tlb addend
tcg-arm: Move load of tlb addend into tcg_out_tlb_read
tcg-arm: Use QEMU_BUILD_BUG_ON to verify constraints on tlb
tcg-arm: Use strd for tcg_out_arg_reg64
tcg-arm: Rearrange slow-path qemu_ld/st
tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64
Message-id: 1380663109-14434-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil
# Via Stefan Weil
* sweil/tci:
misc: Use new rotate functions
bitops: Add rotate functions (rol8, ror8, ...)
tci: Add implementation of rotl_i64, rotr_i64
Message-id: 1380137693-3729-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
There are free scheduling slots between the sequence of
comparison instructions. This requires changing the
register in use to avoid conflict with those compares.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The main intent of the patch is to allow the tlb addend register
to be changed, without tying that change to the constraint. But
the most common side-effect seems to be to enable usage of ldrd
with the r0,r1 pair.
Signed-off-by: Richard Henderson <rth@twiddle.net>
