We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
We modify the request by adding an offset to vmstate. Let's check the
modified request. It will help us to safely move .bdrv_co_preadv_part
and .bdrv_co_pwritev_part to int64_t type of offset and bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Only qcow2 driver supports vmstate.
In qcow2 these requests go through .bdrv_co_p{read,write}v_part
handlers.
So, let's do our basic check for the request on vmstate generic
handlers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Both qemu and qemu-img use writeback cache mode by default, which is
already documented in qemu(1). qemu-nbd uses writethrough cache mode by
default, and the default cache mode is not documented.
According to the qemu-nbd(8):
--cache=CACHE
The cache mode to be used with the file. See the
documentation of the emulator's -drive cache=... option for
allowed values.
qemu(1) says:
The default mode is cache=writeback.
So users have no reason to assume that qemu-nbd is using writethough
cache mode. The only hint is the painfully slow writing when using the
defaults.
Looking in git history, it seems that qemu used writethrough in the past
to support broken guests that did not flush data properly, or could not
flush due to limitations in qemu. But qemu-nbd clients can use
NBD_CMD_FLUSH to flush data, so using writethrough does not help anyone.
Change the default cache mode to writback, and document the default and
available values properly in the online help and manual.
With this change converting image via qemu-nbd is 3.5 times faster.
$ qemu-img create dst.img 50g
$ qemu-nbd -t -f raw -k /tmp/nbd.sock dst.img
Before this change:
$ hyperfine -r3 "./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock"
Benchmark #1: ./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock
Time (mean ± σ): 83.639 s ± 5.970 s [User: 2.733 s, System: 6.112 s]
Range (min … max): 76.749 s … 87.245 s 3 runs
After this change:
$ hyperfine -r3 "./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock"
Benchmark #1: ./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock
Time (mean ± σ): 23.522 s ± 0.433 s [User: 2.083 s, System: 5.475 s]
Range (min … max): 23.234 s … 24.019 s 3 runs
Users can avoid the issue by using --cache=writeback[1] but the defaults
should give good performance for the common use case.
[1] https://bugzilla.redhat.com/1990656
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20210813205519.50518-1-nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Fetch the OpenPOWER images to boot the powernv8 and powernv9 machines
with a simple PCI layout.
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210817093036.1288791-1-clg@kaod.org>
Just a removal of an unused imported symbol.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-16-crosa@redhat.com>
The NetBSD-7.1.2-prep.iso is no longer available on the CDN, but it's
still available in the archive.
Let's update its location so that users without the file on cache can
still fetch it and run the test.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-15-crosa@redhat.com>
Just a clean up for an unused import.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-13-crosa@redhat.com>
This matches the command line on 82a17d1d67, where the "on" or "off"
should be explicitly given.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-9-crosa@redhat.com>
The "check-acceptance" make rule won't necessarily run *all* available
tests, because it employs a filter based on the currently configured
targets. This change in the description of the rule makes that
behavior extra clear.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-3-crosa@redhat.com>
machine_ppc.py contains tests for 3 different ppc based machine types. It
is listed in MAINTAINERS along with the PPC TCG cpu code. That's not
really accurate though, since it's really more about testing those machines
than the CPUs.
Therefore, split it up into separate files for the separate machine types,
and list those along with their machine types in MAINTAINERS.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210927044808.73391-2-david@gibson.dropbear.id.au>
Add the possibility of running all the tests from a single file, or
multiple files, running a single test within a file or multiple tests
within multiple files using `make check-acceptance` and the
AVOCADO_TESTS environment variable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-4-willianr@redhat.com>
Add instructions to the Acceptance tests section about running a
single test file or a test within the test file.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-3-willianr@redhat.com>
Although it is possible to run a specific test using the avocado
command-line, a user may want to use a specific tag while running the
``make check-acceptance`` during the development or debugging.
This allows using the AVOCADO_TAGS environment variable where the user
takes total control of which tests should run based on the tags defined.
This also makes the check-acceptance command flexible to restrict tests
based on tags while running on CI.
e.g.:
AVOCADO_TAGS="foo bar baz" make check-acceptance
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-2-willianr@redhat.com>
Class hierarchy on Python is defined from right to left. Although the
current code is not harmful, let's fix it to avoid problems in the future.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-7-willianr@redhat.com>
The linter is complaining the `pick_default_qemu_bin` is not explicitly
returning None. Fix it to explicitly return None and avoid R1710
inconsistent-return-statements.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-6-willianr@redhat.com>
The current implementation will crash if the connection fails as the
`time` module is not imported. Fix the import problem. While here,
tweaks the connection to wait progressively when the connection fails.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Reworded description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-5-willianr@redhat.com>
PEP3135 states when calling super(), there is no need to use arguments.
This changes the calls on avocado_qemu to standardize according to
PEP3135 and avoid warnings from linters.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-3-willianr@redhat.com>
The avocado.Test class, used as the basis of the avocado_qemu.Test
class, performs a clean of temporary directories up as part of its own
tearDown() implementation.
But the avocado_qemu.Test class is currently missing the same clean
up, as it implemented its own tearDown() method without resorting to
the upper class behavior.
This brings avocado_qemu.Test behavior in sync with the standard
avocado.Test behavior and prevents temporary directories from
cluttering the test results directory (unless instructed to do so with
Avocado's "--keep-tmp" option).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
[willianr: respin to new Python super format]
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-2-willianr@redhat.com>
This patch adds a test for record/replay, which boots Linux
image from the disk and interacts with the network.
The idea and code of this test is borrowed from boot_linux.py
This test includes only x86_64 platform. Other platforms and
machines will be added later after testing and improving
record/replay to completely support them.
Each test consists of the following phases:
- downloading the disk image
- recording the execution
- replaying the execution
Replay does not validates the output, but waits until QEMU
finishes the execution. This is reasonable, because
QEMU usually hangs when replay goes wrong.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737554047.1735673.13133593401566029378.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on alpha platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737553482.1735673.10021851966976933952.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on nios2 platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737552919.1735673.12493523185952280539.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on openrisc platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737552350.1735673.14603125561530143423.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on s390x platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[PMD: Drop default '-smp 1' as suggested by Thomas]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737551785.1735673.6775108576116333386.stgit@pasha-ThinkPad-X280>
Add syntax highlighting for the incoming and outgoing QMP messages.
This is achieved using the pygments module which was added in a
previous commit.
The current implementation is a really simple one which doesn't
allow for any configuration. In future this has to be improved
to allow for easier theme config using an external config of
some sort.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-6-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added pygments as optional dependency for AQMP TUI.
This is required for the upcoming syntax highlighting feature
in AQMP TUI.
The dependency has also been added in the devel optional group.
Added mypy 'ignore_missing_imports' for pygments since it does
not have any type stubs.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-5-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Add an entry point for aqmp-tui. This will allow it to be run from
the command line using "aqmp-tui localhost:1234"
More options available in the TUI can be found using "aqmp-tui -h"
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-4-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added AQMP TUI.
Implements the follwing basic features:
1) Command transmission/reception.
2) Shows events asynchronously.
3) Shows server status in the bottom status bar.
4) Automatic retries on disconnects and error conditions.
Also added type annotations and necessary pylint/mypy configurations.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-3-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Added dependencies for the upcoming AQMP TUI under the optional
'tui' group.
The same dependencies have also been added under the devel group
since no work around has been found for optional groups to imply
other optional groups.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-2-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not exposing this via the Makefile help, it's not likely to be
useful to passersby. Switch the avocado runner to the 'legacy' runner
for now, as the new runner seems to obscure coverage reports, again.
Usage is to enter your venv of choice and then:
`make check-coverage && xdg-open htmlcov/index.html`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Tests a real connect, a real accept, and really sending and receiving a
message over a UNIX socket.
Brings coverage of protocol.py up to ~93%.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-27-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This tests most of protocol.py -- From a hacked up Coverage.py run, it's
at about 86%. There's a few error cases that aren't very well tested
yet, they're hard to induce artificially so far. I'm working on it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Avocado v90 includes improved support for running async unit tests. The
workaround that existed prior to v90 causes the unit tests to fail
afterwards, however, so upgrade our minimum version pin to the very
latest and greatest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add a warning whenever AQMP is used to steer people gently away from
using it for the time-being.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As a convenience. It isn't used by the library itself, but it is used by
the test suite. It will also come in handy for users of the library
still on Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is added in anticipation of wanting it for a synchronous wrapper
for the iotest interface. Normally, execute() and execute_msg() both
raise QMP errors in the form of Python exceptions.
Many iotests expect the entire reply as-is. To reduce churn there, add a
private execution interface that will ease transition churn. However, I
do not wish to encourage its use, so it will remain a private interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add execute() and execute_msg().
_execute() is split into _issue() and _reply() halves so that
hypothetical subclasses of QMP that want to support different execution
paradigms can do so.
I anticipate a synchronous interface may have need of separating the
send/reply phases. However, I do not wish to expose that interface here
and want to actively discourage it, so they remain private interfaces.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add the ability to handle and route messages in qmp_protocol.py. The
interface for actually sending anything still isn't added until next
commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
mypy handles this better -- but we only need the workaround because
pylint under Python 3.6 does not understand that a MutableMapping really
does have a .get() method attached.
We could remove this again once 3.7 is our minimum.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The star of our show!
Add most of the QMP protocol, sans support for actually executing
commands. No problem, that happens in the next several commits.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
too-many-function-args seems prone to failure when considering
things like Method Resolution Order, which mypy gets correct. When
dealing with multiple inheritance, pylint doesn't seem to understand
which method will actually get called, while mypy does.
Remove the less powerful, redundant check.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This class was designed as a "mix-in" primarily so that the feature
could be given its own treatment in its own python module.
It gets quite a bit too long otherwise.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The QMP spec doesn't define very many objects that are iron-clad in
their format, but there are a few. This module makes it trivial to
validate them without relying on an external third-party library.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The Message class is here primarily to serve as a solid type to use for
mypy static typing for unambiguous annotation and documentation.
We can also stuff JSON serialization and deserialization into this class
itself so it can be re-used even outside this infrastructure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is added as a courtesy: many protocols are line-based, including
QMP. Putting it in AsyncProtocol lets us keep the QMP class
implementation just a pinch more abstract.
(And, if we decide to add a QTEST implementation later, it will need
this, too. (Yes, I have a QTEST implementation.))
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add hooks designed to log/filter incoming/outgoing messages. The primary
intent for these is to be able to support iotests which may want to log
messages with specific filters for reproducible output.
Another use is for plugging into Urwid frameworks; all messages in/out
can be automatically added to a rendering list for the purposes of a
qmp-shell like tool.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
