This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSd6RWAAoJECgfDbjSjVRpCH0H/1j25vllaM7S5cnW6Ilk81Uz
U/OA93R3p8A+UmZlcWaNPbAb0GvBLreUXz8QIdyTaGH3v714W5xctPR9cGRlSdlH
ZNd02LAvmui9zFYizWFyUjWqorpTHUBQeeAENZN0CmTUYprI0xEMQ8L/WG0zVal+
JjsQElg2+LSg70g9u8oekooGcjhmuMbD/HkaYmKQTni1GBc8ITmkPVuNn/aqWIIF
oERjE5BoTba22773/PHchU3gT7IKEL+gX/q1RJNghP9V3uQH3u1euLWxUgSGh1sz
BnY8Fu3oROssLZAQ82C+DgTOo/OWCtzKV6Ai60wfDNGrjM214rWG8FZjGKwUWxc=
=/YQA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, pvpanic bug fixes
This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 04 Nov 2013 05:42:46 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and Paolo Bonzini (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vl: allow "cont" from panicked state
exec: limit system memory size
pc: disable acpi info for isapc and old pc machine
Message-id: 1383572851-28326-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After reporting the GUEST_PANICKED monitor event, QEMU stops the VM.
The reason for this is that events are edge-triggered, and can be lost if
management dies at the wrong time. Stopping a panicked VM lets management
know of a panic even if it has crashed; management can learn about the
panic when it restarts and queries running QEMU processes. The downside
is of course that the VM will be paused while management is not running,
but that is acceptable if it only happens with explicit "-device pvpanic".
Upon learning of a panic, management (if configured to do so) can pick a
variety of behaviors: leave the VM paused, reset it, destroy it. In
addition to all of these behaviors, it is possible to dump the VM core
from the host.
However, right now, the panicked state is irreversible, and can only be
exited by resetting the machine. This means that any policy decision
is entirely in the hands of the host. In particular there is no way to
use the "reboot on panic" option together with pvpanic.
This patch makes the panicked state reversible (and removes various
workarounds that were there because of the state being irreversible).
With this change, management has a wider set of possible policies: it
can just log the crash and leave policy to the guest, it can leave the
VM paused. In particular, the "log the crash and continue" is implemented
simply by sending a "cont" as soon as management learns about the panic.
Management could also implement the "irreversible paused state" itself.
And again, all such actions can be coupled with dumping the VM core.
Unfortunately we cannot change the behavior of 1.6.0. Thus, even if
it uses "-device pvpanic", management should check for "cont" failures.
If "cont" fails, management can then log that the VM remained paused
and urge the administrator to update QEMU.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The page table logic in exec.c assumes
that memory addresses are at most TARGET_PHYS_ADDR_SPACE_BITS.
But pci addresses are full 64 bit so if we try to render them ignoring
the extra bits, we get strange effects with sections overlapping each
other.
To fix, simply limit the system memory size to
1 << TARGET_PHYS_ADDR_SPACE_BITS,
pci addresses will be rendered within that.
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable acpi build for isapc and no_kvmclock machine
types (used by xen), since acpi build currently expects pci.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike the existing FW_CFG_E820_TABLE entry which carries reservations
only the new etc/e820 file also has entries for RAM.
Format is simliar to the FW_CFG_E820_TABLE, it is a simple list of
e820_entry structs. Unlike FW_CFG_E820_TABLE it has no count though
as the number of entries can be figured from the file size.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=wGCx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches for 1.7.0-rc0 (v2)
# gpg: Signature made Thu 31 Oct 2013 04:44:39 PM CET using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
* kwolf/tags/for-anthony: (30 commits)
vmdk: Implment bdrv_get_specific_info
qapi: Add optional field 'compressed' to ImageInfo
qemu-iotests: prefill some data to test image
sheepdog: check simultaneous create in resend_aioreq
sheepdog: cancel aio requests if possible
sheepdog: make add_aio_request and send_aioreq void functions
sheepdog: try to reconnect to sheepdog after network error
coroutine: add co_aio_sleep_ns() to allow sleep in block drivers
sheepdog: reload inode outside of resend_aioreq
sheepdog: handle vdi objects in resend_aio_req
sheepdog: check return values of qemu_co_recv/send correctly
qemu-iotests: Test case for backing file deletion
qemu-iotests: drop duplicated "create_image"
qemu-iotests: Fix 051 reference output
block: Avoid unecessary drv->bdrv_getlength() calls
block: Disable BDRV_O_COPY_ON_READ for the backing file
ahci: fix win7 hang on boot
sheepdog: pass copy_policy in the request
sheepdog: explicitly set copies as type uint8_t
block: Don't copy backing file name on error
...
Message-id: 1383064269-27720-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* agraf/ppc-for-upstream: (29 commits)
spapr: Use DeviceClass::fw_name for device tree CPU node
target-ppc: Fill in OpenFirmware names for some PowerPCCPU families
target-ppc: dump-guest-memory support
dump-guest-memory: Check for the correct return value
target-ppc: Use #define for max slb entries
target-ppc: Check for error on address translation in memsave command
target-ppc: Update slb array with correct index values.
spapr-pci: enable irqfd for INTx
xics-kvm: enable irqfd for MSI
xics: Implement H_XIRR_X
xics: Implement H_IPOLL
xics-kvm: Support for in-kernel XICS interrupt controller
xics: add cpu_setup callback
xics: split to xics and xics-common
xics: add missing const specifiers to TypeInfo
xics: convert init() to realize()
xics: add pre_save/post_load dispatchers
xics: replace fprintf with error_report
spapr: move cpu_setup after kvmppc_set_papr
xics: move reset and cpu_setup
...
Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* kraxel/audio.2:
audio: honor QEMU_AUDIO_TIMER_PERIOD instead of waking up every *nano* second
Message-id: 1382622110-19460-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* kraxel/usb.91:
usb-hcd-xhci: Update endpoint context dequeue pointer for streams too
usb-hcd-xhci: Report completion of active transfer with CC_STOPPED on ep stop
usb-hcd-xhci: Remove unused cancelled member from XHCITransfer
usb-hcd-xhci: Remove unused sstreamsm member from XHCIStreamContext
usb-host-libusb: Detach kernel drivers earlier
usb-host-libusb: Configuration 0 may be a valid configuration
usb-host-libusb: Fix reset handling
Message-id: 1382620267-18065-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Implement .bdrv_get_specific_info to return the extent information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).
Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.
Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The compare_u64 function was not sorting the KVM cpreg_list in the
right way due to the wrong returned value. Since we are comparing
two 64bit values we can't simply return their difference if the
returned type is int.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1381513125-26802-2-git-send-email-a.rigo@virtualopensystems.com
[PMM: fixed coding style, indent and commit message formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both KVM and TCG populate the cpreg_list with 64 bit register IDs,
but in the TCG side the cpreg_list is sorted using the 32 bit ID
version while in the kvm side the 64 bit ID version is used. This
patch makes the sorting of the cpreg_list consistent between KVM and
TCG.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1381513125-26802-1-git-send-email-a.rigo@virtualopensystems.com
[PMM: fixed indent, coding style and commit message formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added Vector Base Address remapping on ARM v7.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM: removed spurious mask of value with 1<<31]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that arm_load_kernel doesn't insist on a kernel filename
being present, we can remove some unnecessary conditionals
in board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1379980897-21277-3-git-send-email-peter.maydell@linaro.org
Typically ARM boards will have some kind of flash which might contain
a boot ROM; it's therefore a valid use case to provide only an
image for the boot ROM and not require QEMU's internal boot loader
at all. Remove the fatal error if -kernel isn't specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1379980897-21277-2-git-send-email-peter.maydell@linaro.org
Case 030 occasionally fails because of block job compltes too fast to be
captured by script, and 'unexpected qmp event' of job completion causes
the test failure.
Simply fill in some data to the test image to make this false alarm less
likely to happen.
(For other benefits to prefill data to test image, see also commit
ab68cdfaa).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reconnection happens, all the inflight requests are moved to the
failed request list. As a result, sd_co_rw_vector() can send another
create request before resend_aioreq() resends a create request from
the failed list.
This patch adds a helper function check_simultaneous_create() and
checks simultaneous create requests more strictly in resend_aioreq().
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch tries to cancel aio requests in pending queue and failed
queue. When the sheepdog driver cannot cancel the requests, it waits
for them to be completed.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions no longer return errors. We can make them void
functions and simplify the codes.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This introduces a failed request queue and links all the inflight
requests to the list after network error happens. After QEMU
reconnects to the sheepdog server successfully, the sheepdog block
driver will retry all the requests in the failed queue.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This helper function behaves similarly to co_sleep_ns(), but the
sleeping coroutine will be resumed when using qemu_aio_wait().
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for using resend_aioreq() after reconnecting to the
sheepdog server.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current resend_aio_req() doesn't work when the request is against
vdi objects. This fixes the problem.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qemu_co_recv/send doesn't return the specified length, it means
that an error happened.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Tested-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer generally keeps the size of an image cached in
bs->total_sectors so that it doesn't have to perform expensive
operations to get the size whenever it needs it.
This doesn't work however when using a backend that can change its size
without qemu being aware of it, i.e. passthrough of removable media like
CD-ROMs or floppy disks. For this reason, the caching is disabled when a
removable device is used.
It is obvious that checking whether the _guest_ device has removable
media isn't the right thing to do when we want to know whether the size
of the host backend can change. To make things worse, non-top-level
BlockDriverStates never have any device attached, which makes qemu
assume they are removable, so drv->bdrv_getlength() is always called on
the protocol layer. In the case of raw-posix, this causes unnecessary
lseek() system calls, which turned out to be rather expensive.
This patch completely changes the logic and disables bs->total_sectors
caching only for certain block driver types, for which a size change is
expected: host_cdrom and host_floppy on POSIX, host_device on win32; also
the raw format in case it sits on top of one of these protocols, but in
the common case the nested bdrv_getlength() call on the protocol driver
will use the cache again and avoid an expensive drv->bdrv_getlength()
call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 0ebd24e0a2,
bdrv_open_common will throw an error when trying to open a file
read-only with the BDRV_O_COPY_ON_READ flag set.
Although BDRV_O_RDWR is unset for the backing files,
BDRV_O_COPY_ON_READ is still passed on if copy-on-read was requested
for the drive. Let's unset this flag too before opening the backing
file, or bdrv_open_common will fail.
Signed-off-by: Thibaut LAURENT <thibaut.laurent@gmail.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When AHCI executes an asynchronous IDE command, it checked DRDY without
checking either DRQ or BSY. This sometimes caused interrupt to be sent
before command is actually completed.
This resulted in a race condition: if guest then managed to access the
device before command has completed, it would hang waiting for an
interrupt.
This was observed with windows 7 guests.
To fix, check for DRQ or BSY in additiona to DRDY, if set,
the command is asynchronous so delay the interrupt until
asynchronous done callback is invoked.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently copy_policy isn't used. Recent sheepdog supports erasure coding, which
make use of copy_policy internally, but require client explicitly passing
copy_policy from base inode to newly creately inode for snapshot related
operations.
If connected sheep daemon doesn't utilize copy_policy, passing it to sheep
daemon is just one extra null effect operation. So no compatibility problem.
With this patch, sheepdog can provide erasure coded volume for QEMU VM.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'copies' is actually uint8_t since day one, but request headers and some helper
functions parameterize it as uint32_t for unknown reasons and effectively
reserve 24 bytes for possible future use. This patch explicitly set the correct
for copies and reserve the left bytes.
This is a preparation patch that allow passing copy_policy in request header.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_backing_file() tries to copy the backing file name using
pstrcpy directly after calling bdrv_open() to open the backing file
without checking whether that was actually successful. If it was not,
ps->backing_hd->file will probably be NULL and qemu will crash.
Fix this by moving pstrcpy after checking whether bdrv_open() succeeded.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test case for Multiboot memory map in the tests/multiboot
directory, where future i386 test kernels can be dropped. Because this
requires an x86 build host and an installed 32 bit libgcc, the test is
not part of a regular 'make check'.
The reference output for the test is verified against test runs of the
same multiboot kernel booted by some GRUB 0.97.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a regression introduced by commit e3127ae0c, which kept the
allocation size of the bounce buffer limited to one page in order to
avoid unbounded allocations (as explained in the commit message of
6d16c2f88), but broke the reporting of the shortened bounce buffer to
the caller. The caller therefore assumes that the full requested size
was provided and causes memory corruption when writing beyond the end of
the actually allocated buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Opening the qcow2 image with BDRV_O_NO_FLUSH prevents any flushes during
the image creation. This means that the image has not yet been flushed
to disk when qemu-img create exits. This flush is delayed until the next
operation on the image involving opening it without BDRV_O_NO_FLUSH and
closing (or directly flushing) it. For large images and/or images with a
small cluster size and preallocated metadata, this flush may take a
significant amount of time and may occur unexpectedly.
Reopening the image without BDRV_O_NO_FLUSH right before the end of
qcow2_create2() results in hoisting the potentially costly flush into
the image creation, which is expected to take some time (whereas
successive image operations may be not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix error: ‘inline’ is not at beginning of declaration
[-Werror=old-style-declaration]
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* it's -> its
* grammar fix in ui/vnc-enc-zywrle.h
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The QMP wire format uses "", not '', around strings.
* docs/qapi-code-gen.txt: Fix typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This file is moved out from QMP/ to BUILD dir, change the ignore file
too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
