Commit Graph

100 Commits

Author SHA1 Message Date
Mark Cave-Ayland
0662946aa6 uninorth: create new uninorth device
Commit 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" added a TODO
which was to convert the uninorth registers hack to a proper device. Move
these registers to a new uninorth device, removing the old hacks from
mac_newworld.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-05-04 15:00:37 +10:00
Mark Cave-Ayland
c90c393c2d uninorth: rename UNINState to UNINHostState
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland
e226efbb26 uninorth: move PCI IO (ISA) memory region into the uninorth device
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland
e7755cc114 uninorth: use object link to pass OpenPIC object to uninorth
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland
0b06520954 uninorth: introduce temporary pic_irqs device property
This is in preparation for moving the PCI bus wiring inside the uninorth
host bridge devices. In the future it will be possible to remove this once the
PICs have been switched to use qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Mark Cave-Ayland
5d2eaa0250 uninorth: move uninorth definitions into uninorth.h
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Added hw/hw.h #include as suggested by Philippe Mathieu-Daudé]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
Andrey Smirnov
d64e5eabc4 pci: Add support for Designware IP block
Add code needed to get a functional PCI subsytem when using in
conjunction with upstream Linux guest (4.13+). Tested to work against
"e1000e" (network adapter, using MSI interrupts) as well as
"usb-ehci" (USB controller, using legacy PCI interrupts).

Based on "i.MX6 Applications Processor Reference Manual" (Document
Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux
kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:43 +00:00
Mark Cave-Ayland
9b30179460 apb: rename apb.c to sabre.c
This is the final stage in correcting the naming convention with respect to
sabre, APB and PBM. It is effectively a file rename from apb.c to sabre.c
along with touching up a few constants to remove the remaining references
to APB.

Note that as part of the rename process the configuration variable
CONFIG_PCI_APB is changed to CONFIG_PCI_SABRE.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24 19:19:51 +00:00
Mark Cave-Ayland
b14dcaf4a0 apb: rename QOM type from TYPE_APB to TYPE_SABRE
Similarly rename the corresponding APBState typedef to SabreState.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24 19:19:51 +00:00
Mark Cave-Ayland
8fb28035aa apb: QOMify sabre PCI host bridge
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24 19:19:51 +00:00
Mark Cave-Ayland
fe984c7d0c apb: rename APB functions to use sabre prefix
As hinted in the comment at the top of the file, the naming convention for the
APB types/QOM functions isn't correct. As a starting point we can at least
rename the APB type and related functions to improve the readability of apb.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24 19:19:50 +00:00
Mark Cave-Ayland
ffd9589ee2 apb: split simba PCI bridge into hw/pci-bridge/simba.c
Move the QOM type and macros into a new include/hw/pci-bridge/simba.h
file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled
for sparc64-softmmu builds only.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24 19:19:50 +00:00
Michael S. Tsirkin
acc95bc850 Merge remote-tracking branch 'origin/master' into HEAD
Resolve conflicts around apb.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11 22:03:50 +02:00
Mark Cave-Ayland
0ea833c249 sun4u: split IOMMU device out from apb.c to sun4u_iommu.c
By separating the sun4u IOMMU device into new sun4u_iommu.c and sun4m_iommu.h
files we noticeably simplify apb.c whilst bringing sun4u in line with all the
other IOMMU-supporting architectures.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:48:20 +00:00
Mark Cave-Ayland
aea5b07101 apb: QOMify IOMMU
This is in preparation to split the IOMMU device out of the APB. As part of
this commit we also enforce separation of the IOMMU and APB devices by using
a QOM object link to pass the IOMMU reference and accessing the IOMMU registers
via a separate memory region mapped into the APB config space rather than
directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:48:20 +00:00
Mark Cave-Ayland
a5546222e3 apb: replace OBIO interrupt numbers in pci_pbmA_map_irq() with constants
Following on from the previous commit, we can also do the same with
with legacy OBIO interrupts in pci_pbmA_map_irq().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:48:19 +00:00
Mark Cave-Ayland
4b10c8d701 ebus: wire up OBIO interrupts to APB pbm via qdev GPIOs
This enables us to remove the static array mapping in the ISA IRQ
handler (and the embedded reference to the APB device) by formalising
the interrupt wiring via the qdev GPIO API.

For more clarity we replace the APB OBIO interrupt numbers with constants
designating the interrupt source, and rename isa_irq_handler() to
ebus_isa_irq_handler().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:48:19 +00:00
Mark Cave-Ayland
33c5eb02c4 apb: remove busA property from PBMPCIBridge state
Since the previous commit the only remaining use of the qdev busA property is
to configure the PCI bridge in front of the onboard ebus devices differently
to allow early OpenBIOS serial console access.

Instead we can now manually update the PCI configuration for bridge A in
pci_pbm_reset() and thus completely remove the busA property from the
PBMPCIBridge state.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:48:19 +00:00
Mark Cave-Ayland
cacd05805e apb: remove pci_apb_init() and instantiate APB device using qdev
By making the special_base and mem_base values qdev properties, we can move
the remaining parts of pci_apb_init() into the pbm init() and realize()
functions.

This finally allows us to instantiate the APB directly using standard qdev
create/init functions in sun4u.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:48:15 +00:00
Mark Cave-Ayland
4272ad4018 apb: move the two secondary PCI bridges objects into APBState
This enables us to remove these parameters from pci_apb_init().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:31:31 +00:00
Mark Cave-Ayland
2a4d6af51b apb: use gpios to wire up the apb device to the SPARC CPU IRQs
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:31:31 +00:00
Mark Cave-Ayland
588978c0a1 apb: return APBState from pci_apb_init() rather than PCIBus
This is a first step towards removing pci_apb_init() completely.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-09 21:31:31 +00:00
Mark Cave-Ayland
c796eddaad sun4u: remove pci_ebus_init() function
This is initialisation that should really take place in the ebus realize
function. As part of this we also rework the ebus IRQ mapping so that
instead of having to pass in the array of pbm_irqs, we obtain a reference
to them by looking up the APB device during ebus realize.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:31:31 +00:00
Mark Cave-Ayland
28edc7c92a apb: move QOM macros and typedefs from apb.c to apb.h
This also includes the related IOMMUState typedef and defines.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-09 21:31:31 +00:00
Cédric Le Goater
7718375584 spapr: introduce a spapr_qirq() helper
xics_get_qirq() is only used by the sPAPR machine. Let's move it there
and change its name to reflect its scope. It will be useful for XIVE
support which will use its own set of qirqs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:24 +11:00
David Gibson
791bf3c8f0 pci: Move bridge data structures from pci_bus.h to pci_bridge.h
include/hw/pci/pci_bus.h contains several data structures related to PCI
bridges that aren't needed by most users of pci_bus.h.  We already have
a pci_bridge.h, so move them there.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05 19:13:45 +02:00
Marcel Apfelbaum
9fa99d2519 hw/pci-host: Fix x86 Host Bridges 64bit PCI hole
Currently there is no MMIO range over 4G
reserved for PCI hotplug. Since the 32bit PCI hole
depends on the number of cold-plugged PCI devices
and other factors, it is very possible is too small
to hotplug PCI devices with large BARs.

Fix it by reserving 2G for I4400FX chipset
in order to comply with older Win32 Guest OSes
and 32G for Q35 chipset.

Even if the new defaults of pci-hole64-size will appear in
"info qtree" also for older machines, the property was
not implemented so no changes will be visible to guests.

Note this is a regression since prev QEMU versions had
some range reserved for 64bit PCI hotplug.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-16 17:46:53 +02:00
Pranavkumar Sawargaonkar
70bfdce6a1 hw/pci-host/gpex: Set INTx index/gsi mapping
To implement INTx to gsi routing we need to pass the gpex host
bridge the gsi associated to each INTx index. Let's introduce
irq_num array and gpex_set_irq_num setter function.

Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Feng Kan <fkan@apm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1505296004-6798-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14 18:43:18 +01:00
Laszlo Ersek
2f295167e0 q35/mch: implement extended TSEG sizes
The q35 machine type currently lets the guest firmware select a 1MB, 2MB
or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even
that is not enough when a lot of VCPUs (more than approx. 224) are
configured -- SMRAM footprint scales largely proportionally with VCPU
count.

Introduce a new property for "mch" called "extended-tseg-mbytes", which
expresses (in megabytes) the user's choice of TSEG (SMRAM) size.

Invent a new, QEMU-specific register in the config space of the DRAM
Controller, at offset 0x50, in order to allow guest firmware to query the
TSEG (SMRAM) size.

According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller
Register Address Map (D0:F0)":

    Warning: Address locations that are not listed are considered Intel
             Reserved registers locations. Reads to Reserved registers may
             return non-zero values. Writes to reserved locations may
             cause system failures.

             All registers that are defined in the PCI 2.3 specification,
             but are not necessary or implemented in this component are
             simply not included in this document. The
             reserved/unimplemented space in the PCI configuration header
             space is not documented as such in this summary.

Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part
of the standard PCI config space header. And they precede the capability
list as well, which starts at 0xe0 for this device.

When the guest writes value 0xffff to this register, the value that can be
read back is that of "mch.extended-tseg-mbytes" -- unless it remains
0xffff. The guest is required to write 0xffff first (as opposed to a
read-only register) because PCI config space is generally not cleared on
QEMU reset, and after S3 resume or reboot, new guest firmware running on
old QEMU could read a guest OS-injected value from this register.

After reading the available "extended" TSEG size, the guest firmware may
actually request that TSEG size by writing pattern 11b to the ESMRAMC
register's TSEG_SZ bit-field. (The Intel spec referenced above defines
only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.)

On the QEMU command line, the value can be set with

  -global mch.extended-tseg-mbytes=N

The default value for 2.10+ q35 machine types is 16. The value is limited
to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be
stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users
are responsible for choosing sensible TSEG sizes.

On 2.9 and earlier q35 machine types, the default value is 0. This lets
the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50,
keep their original behavior.

When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is
set to that value on reset, for completeness.

PCI config space is migrated automatically, so no VMSD changes are
necessary.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027
Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-16 18:07:08 +03:00
Daniel Henrique Barboza
318347234d hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque
The pointer drc->detach_cb is being used as a way of informing
the detach() function inside spapr_drc.c which cb to execute. This
information can also be retrieved simply by checking drc->type and
choosing the right callback based on it. In this context, detach_cb
is redundant information that must be managed.

After the previous spapr_lmb_release change, no detach_cb_opaques
are being used by any of the three callbacks functions. This is
yet another information that is now unused and, on top of that, can't
be migrated either.

This patch makes the following changes:

- removal of detach_cb_opaque. the 'opaque' argument was removed from
the callbacks and from the detach() function of sPAPRConnectorClass. The
attribute detach_cb_opaque of sPAPRConnector was removed.

- removal of detach_cb from the detach() call. The function pointer
detach_cb of sPAPRConnector was removed. detach() now uses a
switch(drc->type) to execute the apropriate callback. To achieve this,
spapr_core_release, spapr_lmb_release and spapr_phb_remove_pci_device_cb
callbacks were made public to be visible inside detach().

Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-25 11:31:33 +10:00
David Gibson
82516263ce pseries: Don't expose PCIe extended config space on older machine types
bb9986452 "spapr_pci: Advertise access to PCIe extended config space"
allowed guests to access the extended config space of PCI Express devices
via the PAPR interfaces, even though the paravirtualized bus mostly acts
like plain PCI.

However, that patch enabled access unconditionally, including for existing
machine types, which is an unwise change in behaviour.  This patch limits
the change to pseries-2.9 (and later) machine types.

Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-14 11:54:17 +11:00
Cédric Le Goater
f7759e4331 ppc/xics: use the QOM interface to get irqs
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Paul Burton
62be393423 hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
  removed returning on !level,
  updated IRQ connection with GPIO logic,
  moved xilinx_pcie_init() to boston.c
  replaced stw_le_p() with pci_set_word()
  and other cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21 23:49:29 +00:00
Stefan Weil
5bb8590d37 include: Fix typos found by codespell
Add also a missing parenthesis in a comment.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24 23:26:52 +03:00
David Gibson
5c4537bded spapr: Fix 2.7<->2.8 migration of PCI host bridge
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration
from qemu-2.7 to the current version.  It split the device's MMIO
window into two pieces for 32-bit and 64-bit MMIO.

The patch included backwards compatibility code to convert the old
property into the new format.  However, the property value was also
transferred in the migration stream and compared with a (probably
unwise) VMSTATE_EQUAL.  So, the "raw" value from 2.7 is compared to
the new style converted value from (pre-)2.8 giving a mismatch and
migration failure.

Along with the actual field that caused the breakage, there are
several other ill-advised VMSTATE_EQUAL()s.  To fix forwards
migration, we read the values in the stream into scratch variables and
ignore them, instead of comparing for equality.  To fix backwards
migration, we populate those scratch variables in pre_save() with
adjusted values to match the old behaviour.

To permit the eventual possibility of removing this cruft from the
stream, we only include these compatibility fields if a new
'pre-2.8-migration' property is set.  We clear it on the pseries-2.8
machine type, which obviously can't be migrated backwards, but set it
on earlier machine type versions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-11-23 12:00:48 +11:00
David Gibson
357d1e3bc7 spapr: Improved placement of PCI host bridges in guest memory map
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space.  Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.

This scheme as several problems:
  - It limits guest RAM to 1 TiB (though we have a limited fix for this
    now)
  - It limits the total MMIO window to 64 GiB.  This is not always enough
    for some of the large nVidia GPGPU cards
  - Putting all the windows into a single 64 GiB area means that naturally
    aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB.  We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.

This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.

Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB.  This is broken into 1 TiB chunks.  The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs.  Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.

This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.

We also change some of the default window sizes for manually configured
PHBs to saner values.

Finally we adjust some tests and libqos so that it correctly uses the new
default locations.  Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2016-10-16 12:04:15 +11:00
David Gibson
daa2369903 spapr_pci: Add a 64-bit MMIO window
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
  - A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
  - A 64-bit window which maps onto a large region somewhere high in PCI
    address space (traditionally this used an identity mapping from guest
    physical address to PCI address, but that's not always the case)

The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however.  At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.

This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window.  With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.

This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured.  The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).

So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified.  This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.

For now, this only adds the possibility of 64-bit windows.  The default
configuration still uses the legacy mode.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2016-10-16 12:03:09 +11:00
David Gibson
6737d9ad79 spapr_pci: Delegate placement of PCI host bridges to machine type
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest.  Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.

There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows.  This gives the most control, but is very awkward with 6
mandatory parameters.  Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.

The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO).  Obviously, for migration we can only change the
locations on a new machine type, however.

This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.

So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass.  It's still a bit ugly, but it's about the best we
can do.

For now, this just changes where the calculation is done.  It doesn't
change the actual location of the host bridges, or any other behaviour.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2016-10-16 12:03:09 +11:00
Alexey Kardashevskiy
4814401fa0 spapr_pci: Add numa node id
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
 one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23 12:39:07 +10:00
Ladi Prosek
d4b84d564e Remove unused function declarations
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-15 15:32:22 +03:00
Peter Xu
cfc13df462 acpi: add DMAR scope definition for root IOAPIC
To enable interrupt remapping for intel IOMMU device, each IOAPIC device
in the system reported via ACPI MADT must be explicitly enumerated under
one specific remapping hardware unit. This patch adds the root-complex
IOAPIC into the default DMAR device.

Please refer to VT-d spec 8.3.1.1 for more information.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20 19:30:27 +03:00
Markus Armbruster
121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Markus Armbruster
20668fdebd spapr_pci: Include spapr.h instead of playing games with #error
include/hw/pci-host/spapr.h needs hw/ppc/spapr.h.  It checks whether
its header guard is defined, and errors out if it isn't.

Playing games with some other header's guard symbol is not a good
idea.  Just include the frackin' header already.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Peter Maydell
791b7d2340 pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
 cleanups and fixes all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
 HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
 cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
 PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
 Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
 92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
 =ABGE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, pci, virtio: new features, cleanups, fixes

iommus can not be added with -device.
cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (30 commits)
  vmw_pvscsi: remove unnecessary internal msi state flag
  e1000e: remove unnecessary internal msi state flag
  vmxnet3: remove unnecessary internal msi state flag
  mptsas: remove unnecessary internal msi state flag
  megasas: remove unnecessary megasas_use_msi()
  pci: Convert msi_init() to Error and fix callers to check it
  pci bridge dev: change msi property type
  megasas: change msi/msix property type
  mptsas: change msi property type
  intel-hda: change msi property type
  usb xhci: change msi/msix property type
  change pvscsi_init_msi() type to void
  tests: add APIC.cphp and DSDT.cphp blobs
  tests: acpi: add CPU hotplug testcase
  log: Permit -dfilter 0..0xffffffffffffffff
  range: Replace internal representation of Range
  range: Eliminate direct Range member access
  log: Clean up misuse of Range for -dfilter
  pci_register_bar: cleanup
  Revert "virtio-net: unbreak self announcement and guest offloads after migration"
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-05 16:48:24 +01:00
Alexey Kardashevskiy
ae4de14cd3 spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW)
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)

The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.

This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.

The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.

This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.

These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.

This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-05 14:31:08 +10:00
Markus Armbruster
01c9742d9d pc: Eliminate PcPciInfo
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.

Three users:

* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
  only pci_info.w32 is actually used.  This is confusing.  Replace by
  Range pci_hole.

* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
  from acpi_get_pci_info() to build_dsdt().  Replace by two variables
  Range pci_hole, pci_hole64.  Rename acpi_get_pci_info() to
  acpi_get_pci_holes().

PcPciInfo is now unused; drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-04 14:52:10 +03:00
Marcel Apfelbaum
10d01f73e3 machine: remove iommu property
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04 14:50:58 +03:00
Benjamin Herrenschmidt
27f2458245 ppc/xics: Replace "icp" with "xics" in most places
The "ICP" is a different object than the "XICS". For historical reasons,
we have a number of places where we name a variable "icp" while it contains
a XICSState pointer. There *is* an ICPState structure too so this makes
the code really confusing.

This is a mechanical replacement of all those instances to use the name
"xics" instead. There should be no functional change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[spapr_cpu_init has been moved to spapr_cpu_core.c, change there]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-01 13:41:47 +10:00
Efimov Vasily
401f2f3ef1 Q35: implement property interfece to several parameters
During creation of Q35 instance several parameters are set using direct access.
It violates Qemu device model. Correctly, the parameters should be handled as
object properties.

The patch adds four link type properties for fields:
mch.ram_memory
mch.pci_address_space
mch.system_memory
mch.address_space_io
And, it adds two size type properties for fields:
mch.below_4g_mem_size
mch.above_4g_mem_size

Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:46 +02:00
Alexey Kardashevskiy
b3162f22cb spapr_pci: Add and export DMA resetting helper
This will be later used by the "ibm,reset-pe-dma-window" RTAS handler
which resets the DMA configuration to the defaults.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07 10:17:45 +10:00