Read documentation in "qapi/error.h" and changelog of commit
e3fe3988d7 ("error: Document Error API usage rules") for
rationale.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-7-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pre-plug of a memory device, be it an NVDIMM or a PC-DIMM, ensures
that the memory slot is available and that addresses don't overlap
with existing memory regions. The corresponding DRCs in the LMB
and PMEM namespaces are thus necessarily attachable at plug time.
Pass &error_abort to spapr_drc_attach() in spapr_add_lmbs() and
spapr_add_nvdimm(). This allows to greatly simplify error handling
on the plug path.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunction. These checks are currently performed at plug time,
but they would best sit in a pre-plug handler in order to error
out as early as possible.
Create a spapr_pci_pre_plug() handler and move all the checking
there. Add a check that the associated DRC doesn't already have
an attached device. This is equivalent to the slot availability
check performed by do_pci_register_device() upon realization of
the PCI device.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Never used from the start.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120174646.619395-6-groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR XIVE device is created by the machine in spapr_irq_init().
The latter overrides any value provided by the user with -global for
the "nr-irqs" and "nr-ends" properties with strictly positive values.
It seems reasonable to assume these properties should never be 0,
which wouldn't make much sense by the way.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120174646.619395-2-groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
The handling of the GLUE (General Logic Unit) device is
currently open-coded. Make this into a proper QOM device.
This minor piece of modernisation gets rid of the free
floating qemu_irq array 'pic', which Coverity points out
is technically leaked when we exit the machine init function.
(The replacement glue device is not leaked because it gets
added to the sysbus, so it's accessible via that.)
Fixes: Coverity CID 1421883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201106235109.7066-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The q800 board code connects both of the IRQ outputs of the ESCC
to the same pic[3] qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the PIC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201106235109.7066-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
-----BEGIN PGP SIGNATURE-----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=ISxg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If bdrv_co_yield_to_drain() is called for draining a block node that
runs in a different AioContext, it keeps that AioContext locked while it
yields and schedules a BH in the AioContext to do the actual drain.
As long as executing the BH is the very next thing that the event loop
of the node's AioContext does, this actually happens to work, but when
it tries to execute something else that wants to take the AioContext
lock, it will deadlock. (In the bug report, this other thing is a
virtio-scsi device running virtio_scsi_data_plane_handle_cmd().)
Instead, always drop the AioContext lock across the yield and reacquire
it only when the coroutine is reentered. The BH needs to unconditionally
take the lock for itself now.
This fixes the 'block_resize' QMP command on a block node that runs in
an iothread.
Cc: qemu-stable@nongnu.org
Fixes: eb94b81a94
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1903511
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The drain functions assume that we hold the AioContext lock of the
drained block node. Make sure to actually take the lock.
Cc: qemu-stable@nongnu.org
Fixes: eb94b81a94
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-3-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only thing that happens after the 'out:' label is blk_unref(blk).
However, blk = NULL in all of the error cases, so instead of jumping to
'out:', we can just return directly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-2-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_is_inserted() calls into callers.
We are going to make bdrv_check_byte_request() a clean thing.
bdrv_is_inserted() is not about checking the request, it's about
checking the bs. So, it should be separate.
With this patch we probably change error path for some failure
scenarios. But depending on the fact that querying too big request on
empty cdrom (or corrupted qcow2 node with no drv) will result in EIO
and not ENOMEDIUM would be very strange. More over, we are going to
move to 64bit requests, so larger requests will be allowed anyway.
More over, keeping in mind that cdrom is the only driver that has
.bdrv_is_inserted() handler it's strange that we should care so much
about it in generic block layer, intuitively we should just do read and
write, and cdrom driver should return correct errors if it is not
inserted. But it's a work for another series.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-4-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-3-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should not set overlap_bytes:
1. Don't worry: it is calculated by bdrv_mark_request_serialising() and
will be equal to or greater than bytes anyway.
2. If the request was already aligned up to some greater alignment,
than we may break things: we reduce overlap_bytes, and further
bdrv_mark_request_serialising() may not help, as it will not restore
old bigger alignment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Providing the 'if' property, but not 'canbus' segfaults like this:
#0 0x0000555555b0f14d in can_bus_insert_client (bus=0x0, client=0x555556aa9af0) at ../net/can/can_core.c:88
#1 0x00005555559c3803 in can_host_connect (ch=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:62
#2 0x00005555559c386a in can_host_complete (uc=0x555556aa9ac0, errp=0x7fffffffd568) at ../net/can/can_host.c:72
#3 0x0000555555d52de9 in user_creatable_complete (uc=0x555556aa9ac0, errp=0x7fffffffd5c8) at ../qom/object_interfaces.c:23
Add the missing NULL check.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201130105615.21799-5-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
See the new comment for why this should be done.
I do not have a reproducer on master, but when using FUSE block exports,
this test breaks depending on the underlying filesystem (for me, it
works on tmpfs, but fails on xfs, because the block allocated by
file-posix has 16 kB there instead of 4 kB).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201207152245.66987-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scenario is that when accessing a volume on an NFS filesystem
without supporting the file lock, Qemu will complain "Failed to lock
byte 100", even when setting the file.locking = off.
We should do file lock related operations only when the file.locking is
enabled, otherwise, the syscall of 'fcntl' will return non-zero.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <1607341446-85506-1-git-send-email-fengli@smartx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have good coverage of the normal I/O paths now, but what remains is a
test that tests some more special cases: Exporting an image on itself
(thus turning a formatted image into a raw one), some error cases, and
non-writable and non-growable exports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.
Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pretends FUSE exports are a kind of protocol. As such, they are
always tested under the format node. This is probably the best way to
test them, actually, because this will generate more I/O load and more
varied patterns.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, exports and block devices are not properly shut down and
closed, unless the users explicitly issues blockdev-del and
block-export-del commands for each of them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-17-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
287 creates an image in a subshell (thanks to the pipe) to see whether
that is possible with compression_type=zstd. If _make_test_img were to
modify any global state, this global state would then be lost before we
could cleanup the image.
When using FUSE as the test protocol, this global state is important, so
clean up the image before the state is lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When most iotests want to create a test image that is named differently
from the default $TEST_IMG, they do something like this:
TEST_IMG="$TEST_IMG.base" _make_test_img $options
This works fine with the "file" protocol, but not so much for anything
else: _make_test_img tries to create an image under $TEST_IMG_FILE
first, and only under $TEST_IMG if the former is not set; and on
everything but "file", $TEST_IMG_FILE is set.
There are two ways we can fix this: First, we could make all tests
adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present
(e.g. with something like _set_test_img_suffix $suffix that would affect
not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a
pretty clean solution, and this is maybe what we should have done from
the start.
But it would also require changes to most existing bash tests. So the
alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still
points to the original value. If so, it is possible that the caller has
adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for
most protocols) derive the corresponding $TEST_IMG_FILE value from
$TEST_IMG value and thus work around what technically is the caller
misbehaving.
This second solution is less clean, but it is robust against people
keeping their old habit of adjusting TEST_IMG only, and requires much
less changes. So this patch implements it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-15-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most Python tests are restricted to the file protocol (without
explicitly saying so), but these are the ones that would break
./check -fuse -qcow2.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the test environment has some other child processes running (like a
storage daemon that provides a FUSE export), then "wait" will never
finish. Use wait=yes _cleanup_qemu instead.
(We need to discard the output so there is no change to the reference
output.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-13-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid creating images with custom filenames in $TEST_DIR, because
non-file protocols may want to keep $TEST_IMG (and all other test
images) in some other directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-12-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This generally does not work on non-file protocols. It is better to
create the image with the final name from the start, and most tests do
this already. Let 046 follow suit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do not allow direct file creation, such as FUSE exports.
The only problem is that for formats other than qcow2 and qed (qcow1 at
least), this may lead to high disk usage for some reason, so we cannot
do it everywhere.
But we can do it in 028 and 089, so let us do that so they can run on
FUSE exports. Also, in 028 this allows us to remove a 9-line comment
that used to explain why we cannot safely filter drive-backup's image
creation output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Executing _make_test_img as part of a pipe will undo all variable
changes it has done. As such, this could not work with FUSE (because
we want to remember all of our exports and their qemu instances).
Replace the pipe by a temporary file in 071 and 174 (the two tests that
can run on FUSE).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In most cases, _make_test_img does not need a _filter_imgfmt on top. It
does that by itself.
(The exception is when IMGFMT has been overwritten but TEST_IMG has not.
In such cases, we do need a _filter_imgfmt on top to filter the test's
original IMGFMT from TEST_IMG.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a relatively new feature in libfuse (available since 3.8.0,
which was released in November 2019), so we have to add a dedicated
check whether it is available before making use of it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows allocating areas after the (old) EOF as part of a growing
resize, writing zeroes, and discarding.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These will behave more like normal files in that writes beyond the EOF
will automatically grow the export size.
As an optimization, keep the RESIZE permission for growable exports so
we do not have to take it for every post-EOF write. (This permission is
not released when the export is destroyed, because at that point the
BlockBackend is destroyed altogether anyway.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the export actually useful instead of only producing errors
whenever it is accessed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block-export-add type=fuse allows mounting block graph nodes via FUSE on
some existing regular file. That file should then appears like a raw
disk image, and accesses to it result in accesses to the exported BDS.
Right now, we only implement the necessary block export functions to set
it up and shut it down. We do not implement any access functions, so
accessing the mount point only results in errors. This will be
addressed by a followup patch.
We keep a hash table of exported mount points, because we want to be
able to detect when users try to use a mount point twice. This is
because we invoke stat() to check whether the given mount point is a
regular file, but if that file is served by ourselves (because it is
already used as a mount point), then this stat() would have to be served
by ourselves, too, which is impossible to do while we (as the caller)
are waiting for it to settle. Therefore, keep track of mount point
paths to at least catch the most obvious instances of that problem.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/iscsi.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201203075055.127773-5-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/throttle-groups.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201203075055.127773-4-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/curl.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201203075055.127773-3-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace manual lock()/unlock() calls with lock guard macros
(QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD) in block/accounting.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201203075055.127773-2-ganqixin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
