Devices can use a mix of qdev and QOM properties. Currently only the
qdev properties are displayed by device-list-properties.
This patch extends the property enumeration algorithm to also display
QOM properties (excluding the implicit "type", "realized",
"hotpluggable", and "parent_bus" properties).
When a qdev property exists, use the qdev type name to preserve
backwards compatibility. QOM type names can be different for bool (qdev
on/off) and str (used by qdev pointers).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before commit 580b6b2aa2(dataplane: use the QEMU block
layer for I/O), dataplane for virtio-blk submits block
I/O as a batch.
This commit 580b6b2aa2 replaces the custom linux AIO
implementation(including submit I/O as a batch) with QEMU
block layer, but this commit causes ~40% throughput regression
on virtio-blk performance, and removing submitting I/O
as a batch is one of the causes.
This patch applies the newly introduced bdrv_io_plug() and
bdrv_io_unplug() interfaces to support submitting I/O
at batch for Qemu block layer, and in my test, the change
can improve throughput by ~30% with 'aio=native'.
Following my fio test script:
[global]
direct=1
size=4G
bsrange=4k-4k
timeout=40
numjobs=4
ioengine=libaio
iodepth=64
filename=/dev/vdc
group_reporting=1
[f]
rw=randread
Result on one of my small machine(host: x86_64, 2cores, 4thread, guest: 4cores):
- qemu master: 65K IOPS
- qemu master with these patches: 92K IOPS
- 2.0.0 release(dataplane using custom linux aio): 104K IOPS
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch implements .bdrv_io_plug, .bdrv_io_unplug and
.bdrv_flush_io_queue callbacks for linux-aio Block Drivers,
so that submitting I/O as a batch can be supported on linux-aio.
[Unprocessed requests are completed with -EIO instead of a bogus ret
value.
--Stefan]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch introduces three APIs so that following
patches can support queuing I/O requests and submitting them
as a batch for improving I/O performance.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We got a merry mix of -1 and -errno here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoid breaking tests on RHEL6 where gnutls is too old for quorum to be
built by default.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The data byte count(DBC) read from the description information is defined for
bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion
(I) flag.
Completion interrupts are triggered after every transaction instead of on
I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the
DBC leads to a negative offset that causes sglist allocation to fail.
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shut up Coverity's complaint about unchecked fcntl return values,
and especially make the code simpler and more efficient.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTsnWTAAoJEJykq7OBq3PIKXMH/0+fWDs4ZnAl32AVmHTYFNZS
AJHkzdRCWAsq2E7jqoPficjZSy7oZMvgWN7t30SxljlhRVfilr+KXNHl0sxXFRAn
rnjWIPBATcVYpHaPcjP85YTsJitjj08eUYVD2HgbtIarQyyUdhEG5l1voAI8oxkY
7T92X+olbyI+NqdDUMvQUt0gdoptZPEnieCI5rScQQiwXKRv9uEJBYBSlTFJ5BTb
6XOszj62Yk25W3Sq74yfvvecFhNIXAOlzXqD03DSKHos0pLIJhMxEeYZrKIacBqP
HspYKFwOjRAflp3Pcv29m+6IjnL33IJJK6dou9Aou4UqsLRReDeeeiU1aX9ym2Q=
=txun
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Tue 01 Jul 2014 09:47:15 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (23 commits)
block: add backing-file option to block-stream
block: extend block-commit to accept a string for the backing file
block: add helper function to determine if a BDS is in a chain
block: add QAPI command to allow live backing file change
qapi: Change back sector-count to sectors-count in quorum QAPI events.
block/cow: Avoid use of uninitialized cow_bs in error path
block: simplify bdrv_find_base() and bdrv_find_overlay()
block: make 'top' argument to block-commit optional
iotests: Add more tests to quick group
iotests: Add qemu tests to quick group
iotests: Simplify qemu-iotests-quick.sh
qemu-img create: add 'nocow' option
virtio-blk: remove need for explicit x-data-plane=on option
qdev: drop iothread property type
virtio-blk: replace x-iothread with iothread link property
virtio-blk: move qdev properties into virtio-blk.c
virtio: fix virtio-blk child refcount in transports
virtio-blk: drop virtio_blk_set_conf()
virtio-blk: use aliases instead of duplicate qdev properties
qdev: add qdev_alias_all_properties()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
this patch makes the VNC server work correctly if the
server surface and the guest surface have different sizes.
Basically the server surface is adjusted to not exceed VNC_MAX_WIDTH
x VNC_MAX_HEIGHT and additionally the width is rounded up to multiple of
VNC_DIRTY_PIXELS_PER_BIT.
If we have a resolution whose width is not dividable by VNC_DIRTY_PIXELS_PER_BIT
we now get a small black bar on the right of the screen.
If the surface is too big to fit the limits only the upper left area is shown.
On top of that this fixes 2 memory corruption issues:
The first was actually discovered during playing
around with a Windows 7 vServer. During resolution
change in Windows 7 it happens sometimes that Windows
changes to an intermediate resolution where
server_stride % cmp_bytes != 0 (in vnc_refresh_server_surface).
This happens only if width % VNC_DIRTY_PIXELS_PER_BIT != 0.
The second is a theoretical issue, but is maybe exploitable
by the guest. If for some reason the guest surface size is bigger
than VNC_MAX_WIDTH x VNC_MAX_HEIGHT we end up in severe corruption since
this limit is nowhere enforced.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently a malicious client could define a payload
size of 2^32 - 1 bytes and send up to that size of
data to the vnc server. The server would allocated
that amount of memory which could easily create an
out of memory condition.
This patch limits the payload size to 1MB max.
Please note that client_cut_text messages are currently
silently ignored.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If libusb_get_device_list() fails, the uninitialized local variable
libusb_device would be passed to libusb_free_device_list(), that
will cause a crash, like:
(gdb) bt
#0 0x00007fbbb4bafc10 in pthread_mutex_lock () from /lib64/libpthread.so.0
#1 0x00007fbbb233e653 in libusb_unref_device (dev=0x6275682d627375)
at core.c:902
#2 0x00007fbbb233e739 in libusb_free_device_list (list=0x7fbbb6e8436e,
unref_devices=<optimized out>) at core.c:653
#3 0x00007fbbb6cd80a4 in usb_host_auto_check (unused=unused@entry=0x0)
at hw/usb/host-libusb.c:1446
#4 0x00007fbbb6cd8525 in usb_host_initfn (udev=0x7fbbbd3c5670)
at hw/usb/host-libusb.c:912
#5 0x00007fbbb6cc123b in usb_device_init (dev=0x7fbbbd3c5670)
at hw/usb/bus.c:106
...
So initialize libusb_device at the begin time.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to an incomplete initialization, adding a usb-bt-dongle device through HMP
or QMP will cause a segmentation fault.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guest mouse pointer was jumpy, when moving host mouse in the vertical direction (see bug #1327800).
Signed-off-by: Christian Burger <christian@krikkel.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/bonzini/memory:
qdev: correctly send DEVICE_DELETED for recursively-deleted devices
memory: do not give a name to the internal exec.c regions
memory: MemoryRegion: Add size property
memory: MemoryRegion: Add may-overlap and priority props
memory: MemoryRegion: Add container and addr props
memory: MemoryRegion: replace owner field with QOM parent
memory: MemoryRegion: QOMify
memory: MemoryRegion: use /machine as default owner
libqtest: escape strings in QMP commands, fix leak
qom: object: Ignore refs/unrefs of NULL
qom: object: remove parent pointer when unparenting
mc146818rtc: add "rtc-time" link to "/machine/rtc"
qom: allow creating an alias of a child<> property
qom: add a generic mechanism to resolve paths
qom: add object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
configure: Fix -lm test, so that tools can be compiled on hosts that require -lm
virtio-scsi: scsi events must be converted to target endianness
virtio-scsi: virtio_scsi_push_event() lacks VirtIOSCSIReq parsing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.
The root cause may be not in QEMU mostly. However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.
Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.
When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.
if (qemu_powerdown_requested())
qemu_system_powerdown()
monitor_protocol_event(QEVENT_POWERDOWN, NULL)
OR
if(qemu_shutdown_requested()}
monitor_protocol_event(QEVENT_SHUTDOWN, NULL);
The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.
Signed-off-by: Yang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a small helper function, to determine if 'base' is in the
chain of BlockDriverState 'top'. It returns true if it is in the chain,
and false otherwise.
If either argument is NULL, it will also return false.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows a user to make a live change to the backing file recorded in
an open image.
The image file to modify can be specified 2 ways:
1) image filename
2) image node-name
Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.
It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.
A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.
[Jeff is offline so I respun this patch in his absence. Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The existing test whether "-lm" needs to be included or not is
insufficient as it reports false negative on Fedora20/ppc64.
This happens because sin(0.0) is a constant value which compiler
can safely throw away and therefore there is no need to add "-lm".
As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile.
This adds a global variable and uses it in the test to prevent
from optimization.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Use Peter's improvement on the test to fool LTO, and remove the
now useless -lm addition in Makefile.target. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a device is unparented (i.e. made completely hidden from management)
we want to send a DEVICE_DELETED event only if the device actually was
realized. This avoids raising DEVICE_DELETED events when device_add
fails.
However, this does not work right for recursively-deleted
devices: the whole tree is _first_ unrealized, _then_ unparented.
Then device_unparent sees realized==false and fails to trigger
the event. The solution is simply to move have_realized into
the DeviceState struct. If device_add fails, we never set the
new field to true and DEVICE_DELETED is not sent.
Fixes qemu-iotests testcase 067 (broken by commit 5942a19, though that
commit in turn fixed a possible segfault in the same test).
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To allow devices to dynamically resize the device. The motivation is
to allow devices with variable size to init their memory_region
without size early and then correctly populate size at realize() time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QOM propertyify the .may-overlap and .priority fields. The setters
will re-add the memory as a subregion if needed (i.e. the values change
when the memory region is already contained).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Remove setters. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the already existing .parent and .addr fields as QOM properties.
.parent (i.e. the field describing the memory region that contains this
one in Memory hierachy) is renamed "container". This is to avoid
confusion with the QOM parent.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Remove setters. Do not unref parent on releasing the property. Clean
up error propagation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QOMify memory regions as an Object. The former init() and destroy()
routines become instance_init() and instance_finalize() resp.
memory_region_init() is re-implemented to be:
object_initialize() + set fields
memory_region_destroy() is re-implemented to call unparent().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Add newly-created MR as child, unparent on destruction. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be added (after QOMification) as the QOM parent.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libqtest is using g_strdup_printf to format QMP commands, but
this does not work if the argument strings need to be escaped.
Instead, use the fancy %-formatting functionality of QObject.
The only change required in tests is that strings have to be
formatted as %s, not '%s' or \"%s\". Luckily this usage of
parameterized QMP commands is not that frequent.
The leak is in socket_sendf. Since we are extracting the send
loop to a new function, fix it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just do nothing if passed NULL for a ref or unref. This avoids
call sites that manage a combination of NULL or non-NULL pointers
having to add iffery around every ref and unref.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain parts of the QOM framework test this pointer to determine if
an object is parented. Nuke it when the object is unparented to allow
for reuse of an object after unparenting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a link to rtc under /machine providing a stable
location for management apps to query the value of the
time. The link should be added by any object that sends
RTC_TIME_CHANGE events.
{"execute":"qom-get","arguments":{"path":"/machine","property":"rtc-time"} }
Suggested by Paolo Bonzini and Andreas Faerber.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Child properties must be unique. Fix this problem by
turning their aliases into links.
The resolve function that forwards to the target property
does not have any knowledge of the target property's type,
so it works fine.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may be desirable to have custom link<> properties that do more
than just store an object. Even the addition of a "check"
function is not enough if setting the link has side effects
or if a non-standard reference counting is preferrable.
Avoid the assumption that the opaque field of a link<> is a
LinkProperty struct, by adding a generic "resolve" callback
to ObjectProperty. This fixes aliases of link properties.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fe069d9d had aligned code and documentation while dropping the s from the
actual JSON output. Fix that.
This also fix test/qemu-iotest/081 since the missing s was causing a permutation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 25814e8987 introduced an error-exit code path which does
a "goto exit" before the cow_bs variable is initialized, meaning
we would call bdrv_unref() on an uninitialized variable and
likely segfault. Fix this by moving the NULL-initialization
to the top of the function and making the exit code path handle
the case where it is NULL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the function bdrv_find_overlay(). With this change,
bdrv_find_base() is just a subset of usage of bdrv_find_overlay(),
so this also takes advantage of that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>