The Display Port has some strong PIXMAN dependency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On the vexpress-a9 board we try to map both RAM and flash to address 0,
as seen in "info mtree":
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000003ffffff (prio 0, romd): alias vexpress.flashalias @vexpress.flash0 0000000000000000-0000000003ffffff
0000000000000000-0000000003ffffff (prio 0, ram): alias vexpress.lowmem @vexpress.highmem 0000000000000000-0000000003ffffff
0000000010000000-0000000010000fff (prio 0, i/o): arm-sysctl
0000000010004000-0000000010004fff (prio 0, i/o): pl041
(etc)
The flash "wins" and the RAM mapping is useless (but also harmless).
This happened as a result of commit 6ec1588e in 2014, which changed
"we always map the RAM to the low addresses for vexpress-a9" to "we
always map flash in the low addresses", but forgot to stop mapping
the RAM.
In real hardware, this low part of memory is remappable, both at
runtime by the guest writing to a control register, and configurably
as to what you get out of reset -- you can have the first flash
device, or the second, or the DDR2 RAM, or the external AXI bus
(which for QEMU means "nothing there"). In an ideal world we would
support that remapping both at runtime and via a machine property to
select the out-of-reset behaviour.
Pending anybody caring enough to implement the full remapping
behaviour:
* remove the useless mapped-but-inaccessible lowram MR
* document that QEMU doesn't support remapping of low memory
Fixes: 6ec1588e ("hw/arm/vexpress: Alias NOR flash at 0 for vexpress-a9")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1761
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231103185602.875849-1-peter.maydell@linaro.org
Documentation for using the GAS in ACPI tables to report debug UART addresses at
https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
states the following:
- The Register Bit Width field contains the register stride and must be a
power of 2 that is at least as large as the access size. On 32-bit
platforms this value cannot exceed 32. On 64-bit platforms this value
cannot exceed 64.
- The Access Size field is used to determine whether byte, WORD, DWORD, or
QWORD accesses are to be used. QWORD accesses are only valid on 64-bit
architectures.
Documentation for the ARM PL011 at
https://developer.arm.com/documentation/ddi0183/latest/
states that the registers are:
- spaced 4 bytes apart (see Table 3-2), so register stride must be 32.
- 16 bits in size in some cases (see individual registers), so access
size must be at least 2.
Linux doesn't seem to care about this error in the table, but it does
affect at least the NOVA microhypervisor.
In theory we therefore have a choice between reporting the access
size as 2 (16 bit accesses) or 3 (32-bit accesses). In practice,
Linux does not correctly handle the case where the table reports the
access size as 2: as of kernel commit 750b95887e5678, the code in
acpi_parse_spcr() tries to tell the serial driver to use 16 bit
accesses by passing "mmio16" in the option string, but the PL011
driver code in pl011_console_match() only recognizes "mmio" or
"mmio32". The result is that unless the user has enabled 'earlycon'
there is no console output from the guest kernel.
We therefore choose to report the access size as 32 bits; this works
for NOVA and also for Linux. It is also what the UEFI firmware on a
Raspberry Pi 4 reports, so we're in line with existing real-world
practice.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1938
Signed-off-by: Udo Steinberg <udo@hypervisor.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweaks; use 32 bit accesses]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
PMU IRQ registration fails for arm64 guests:
[ 0.563689] hw perfevents: unable to request IRQ14 for ARM PMU counters
[ 0.565160] armv8-pmu: probe of pmu failed with error -22
That commit re-defined VIRTUAL_PMU_IRQ to be a INTID but missed a case
where the PMU IRQ is actually referred by its PPI index. Fix that by using
INTID_TO_PPI() in that case.
Fixes: 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1960
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 475d918d-ab0e-f717-7206-57a5beb28c7b@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Connect the support for Versal True Random Number Generator
(TRNG) device.
Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231031184611.3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing the CPU index and resolving it,
use a QOM link to directly pass the CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030083706.63685-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have converted to qdev, we can use the newer
qemu_input_handler_register() API rather than the legacy
qemu_add_kbd_event_handler().
Since we only have one user, take the opportunity to convert
from scancodes to QCodes, rather than using
qemu_input_key_value_to_scancode() (which adds an 0xe0
prefix and encodes up/down indication in the scancode,
which our old handler function then had to reverse). That
lets us drop the old state field which was tracking whether
we were halfway through a two-byte scancode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-7-peter.maydell@linaro.org
Convert the hw/input/stellaris_input device to qdev.
The interface uses an array property for the board to specify the
keycodes to use, so the s->keycodes memory is now allocated by the
array-property machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-6-peter.maydell@linaro.org
This source file implements a stellaris gamepad device; rename
it so that it is a closer match to the device name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-2-peter.maydell@linaro.org
Prefer using a well known local first CPU rather than a global one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231025065909.57344-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qbus_new(), called in i2c_init_bus(), should not be called
on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM objects shouldn't access each other internals fields
except using the QOM API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Factor reset code out of the DeviceRealize() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
Implement a model of the Neoverse N2 CPU. This is an Armv9.0-A
processor very similar to the Cortex-A710. The differences are:
* no FEAT_EVT
* FEAT_DGH (data gathering hint)
* FEAT_NV (not yet implemented in QEMU)
* Statistical Profiling Extension (not implemented in QEMU)
* 48 bit physical address range, not 40
* CTR_EL0.DIC = 1 (no explicit icache cleaning needed)
* PMCR_EL0.N = 6 (always 6 PMU counters, not 20)
Because it has 48-bit physical address support, we can use
this CPU in the sbsa-ref board as well as the virt board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-3-peter.maydell@linaro.org
The ARM array and VIC peripheral are only used by the
2400 series, remove them from the common AspeedSoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The v7-A cluster is specific to the Aspeed 2600 series,
remove it from the common AspeedSoCState.
The ARM cores belong to the MP cluster, but the array
is currently used by TYPE_ASPEED2600_SOC. We'll clean
that soon, but for now keep it in Aspeed2600SoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The v7-M core is specific to the Aspeed 10x0 series,
remove it from the common AspeedSoCState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED2400_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
TYPE_ASPEED_SOC is common to various Aspeed SoCs,
define it in aspeed_soc_common.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED2600_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_ASPEED10X0_SOC inherits from TYPE_ASPEED_SOC.
In few commits we'll add more fields, but to keep
review process simple, don't add any yet.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We want to derivate the big AspeedSoCState object in some more
SoC-specific ones. Since the object size will vary, allocate it
dynamically.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Keep aspeed_soc_class_init() generic, set the realize handler
to aspeed_ast2400_soc_realize() in each 2400/2500 class_init.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
aspeed_soc.c contains definitions specific to the AST2400
and AST2500 SoCs, but also some definitions for other AST
SoCs: move them to a common file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
-----BEGIN PGP SIGNATURE-----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=9dZy
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20231019' of https://github.com/philmd/qemu into staging
Misc hardware patch queue
- MAINTAINERS updates (Zoltan, Thomas)
- Fix cutils::get_relocated_path on Windows host (Akihiko)
- Housekeeping in Memory APIs (Marc-André)
- SDHCI fix for SDMA transfer (Lu, Jianxian)
- Various QOM/QDev/SysBus cleanups (Philippe)
- Constify QemuInputHandler structure (Philippe)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmUxnKAACgkQ4+MsLN6t
# wN6UPw//abFZgckpxDYow4UfMu7esvkhICBvXjqDEdX2U/PBYmef049T5RVW8oDm
# NWnxRA9XydzTeToH56tU2tjXbjWKF5LcJVwrCNl6XFRdLYaR3hzejm96hX99C89J
# PB/2ineeAwidBoFfgjkvz0FLRr1ePaN74YXedPSHzywG+0dAOvpNUubbsggn3i5k
# 1wTlgfDvL6iz8NMEOSBp6cv5D4Ix0WshkqlCac0gQ74lYSM1tk/EeRiSy2IHWQQB
# 4FHd9Wo9brzLQCbhbb4FapTK0POScy0LebzRWOWfLtyWS+FRBC3kxO126I67CwMb
# XRS4YgBqC3U7IGsbzV+fWP01pVeJRzZ1vrv4vdiIYvqTdgNlmFbGjJUwEmPmrokt
# q5UreAjMUNLMEXiY6QHFq3N5I+UMY1jslcf7K/ZwDqSlqaquAe+gbnQOAMXDYgb6
# GWsBrLM2WA5E9ObbxsHdxgZqW1NxcWJpSBvjNiOV9t/jqoqpxYwHr5HAvR1xUwm+
# qRKRayRpLlX/Yad4NlvJaH5jvsMrI4bnxTYWVevLvYzc07Xo3dVxW1c+P+WCdjfM
# O3bLAvwO7Mw7GRiSNpU8zTbRJu/dS4NWDWZ24u606Cy7qD/qouz89JjkKVYYSFkX
# vNp7YOenPf4K6pak/lC3NOLIPlYmnnCLv3RCiaO6wHi4bk1yEBU=
# =9dZy
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 14:16:16 PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20231019' of https://github.com/philmd/qemu: (46 commits)
ui/input: Constify QemuInputHandler structure
hw/net: Declare link using static DEFINE_PROP_LINK() macro
hw/dma: Declare link using static DEFINE_PROP_LINK() macro
hw/scsi/virtio-scsi: Use VIRTIO_SCSI_COMMON() macro
hw/display/virtio-gpu: Use VIRTIO_DEVICE() macro
hw/block/vhost-user-blk: Use DEVICE() / VIRTIO_DEVICE() macros
hw/virtio/virtio-pmem: Replace impossible check by assertion
hw/s390x/css-bridge: Realize sysbus device before accessing it
hw/isa: Realize ISA bridge device before accessing it
hw/arm/virt: Realize ARM_GICV2M sysbus device before accessing it
hw/acpi: Realize ACPI_GED sysbus device before accessing it
hw/pci-host/bonito: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Do not use SysBus API to map local MMIO region
hw/misc/allwinner-dramc: Move sysbus_mmio_map call from init -> realize
hw/i386/intel_iommu: Do not use SysBus API to map local MMIO region
hw/i386/amd_iommu: Do not use SysBus API to map local MMIO region
hw/audio/pcspk: Inline pcspk_init()
hw/intc/spapr_xive: Do not use SysBus API to map local MMIO region
hw/intc/spapr_xive: Move sysbus_init_mmio() calls around
hw/ppc/pnv: Do not use SysBus API to map local MMIO region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sysbus_mmio_map() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231018141151.87466-8-philmd@linaro.org>
sysbus_mmio_map() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231018141151.87466-7-philmd@linaro.org>
The code for powering on a CPU in arm-powerctl.c has two separate
use cases:
* emulation of a real hardware power controller
* emulation of firmware interfaces (primarily PSCI) with
CPU on/off APIs
For the first case, we only need to reset the CPU and set its
starting PC and X0. For the second case, because we're emulating the
firmware we need to ensure that it's in the state that the firmware
provides. In particular, when we reset to a lower EL than the
highest one we are emulating, we need to put the CPU into a state
that permits correct running at that lower EL. We already do a
little of this in arm-powerctl.c (for instance we set SCR_HCE to
enable the HVC insn) but we don't do enough of it. This means that
in the case where we are emulating EL3 but also providing emulated
PSCI the guest will crash when a secondary core tries to use a
feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth.
The hw/arm/boot.c code also has to support this "start guest code in
an EL that's lower than the highest emulated EL" case in order to do
direct guest kernel booting; it has all the necessary initialization
code to set the SCR_EL3 bits. Pull the relevant boot.c code out into
a separate function so we can share it between there and
arm-powerctl.c.
This refactoring has a few code changes that look like they
might be behaviour changes but aren't:
* if info->secure_boot is false and info->secure_board_setup is
true, then the old code would start the first CPU in Hyp
mode but without changing SCR.NS and NSACR.{CP11,CP10}.
This was wrong behaviour because there's no such thing
as Secure Hyp mode. The new code will leave the CPU in SVC.
(There is no board which sets secure_boot to false and
secure_board_setup to true, so this isn't a behaviour
change for any of our boards.)
* we don't explicitly clear SCR.NS when arm-powerctl.c
does a CPU-on to EL3. This was a no-op because CPU reset
will reset to NS == 0.
And some real behaviour changes:
* we no longer set HCR_EL2.RW when booting into EL2: the guest
can and should do that themselves before dropping into their
EL1 code. (arm-powerctl and boot did this differently; I
opted to use the logic from arm-powerctl, which only sets
HCR_EL2.RW when it's directly starting the guest in EL1,
because it's more correct, and I don't expect guests to be
accidentally depending on our having set the RW bit for them.)
* if we are booting a CPU into AArch32 Secure SVC then we won't
set SCR.HCE any more. This affects only the vexpress-a15 and
raspi2b machine types. Guests booting in this case will either:
- be able to set SCR.HCE themselves as part of moving from
Secure SVC into NS Hyp mode
- will move from Secure SVC to NS SVC, and won't care about
behaviour of the HVC insn
- will stay in Secure SVC, and won't care about HVC
* on an arm-powerctl CPU-on we will now set the SCR bits for
pauth/mte/sve/sme/hcx/fgt features
The first two of these are very minor and I don't expect guest
code to trip over them, so I didn't judge it worth convoluting
the code in an attempt to keep exactly the same boot.c behaviour.
The third change fixes issue 1899.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org
The SMMUv3.1-XNX feature is mandatory for an SMMUv3.1 if S2P is
supported, so we should theoretically have implemented it as part of
the recent S2P work. Fortunately, for us the implementation is a
no-op.
This feature is about interpretation of the stage 2 page table
descriptor XN bits, which control execute permissions.
For QEMU, the permission bits passed to an IOMMU (via MemTxAttrs and
IOMMUAccessFlags) only indicate read and write; we do not distinguish
data reads from instruction reads outside the CPU proper. In the
SMMU architecture's terms, our interconnect between the client device
and the SMMU doesn't have the ability to convey the INST attribute,
and we therefore use the default value of "data" for this attribute.
We also do not support the bits in the Stream Table Entry that can
override the on-the-bus transaction attribute permissions (we do not
set SMMU_IDR1.ATTR_PERMS_OVR=1).
These two things together mean that for our implementation, it never
has to deal with transactions with the INST attribute, and so it can
correctly ignore the XN bits entirely. So we already implement
FEAT_XNX's "XN field is now 2 bits, not 1" behaviour to the extent
that we need to.
Advertise the presence of the feature in SMMU_IDR3.XNX.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-4-peter.maydell@linaro.org
In smmuv3_init_regs() when we set the various bits in the ID
registers, we do this almost in order of the fields in the
registers, but not quite. Move the initialization of
SMMU_IDR3.RIL and SMMU_IDR5.OAS into their correct places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-3-peter.maydell@linaro.org
Update the SMMUv3 ID register bit field definitions to the
set in the most recent specification (IHI0700 F.a).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-2-peter.maydell@linaro.org
Use the private peripheral interrupt definitions from bsa.h instead of
defining them locally. Refactor to use the INTIDs defined there instead
of the PPI# used previously.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-4-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31.
As in, PPI0 is INTID16 .. PPI15 is INTID31.
Arm's Base System Architecture specification (BSA) lists the mandated and
recommended private interrupt IDs by INTID, not by PPI index. But current
definitions in virt define them by PPI index, complicating cross
referencing.
Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value,
converting a PPI index to an INTID.
Resolve this by redefining the BSA-allocated PPIs by their INTIDs,
and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
