The lack of ffs(3) in the MinGW headers is a hint that we shouldn't rely
on it. MinGW 4.9.2 does not make it available for linking when QEMU's
./configure --enable-debug is used (release builds are fine though).
Now that all QEMU code has been switched to ctz32() there is no need for
ffs(3).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-9-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rewrite the loop using level &= level - 1 to clear the least significant
bit after each iteration. This simplifies the loop and makes it easy to
replace ffs(3) with ctz32().
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-8-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ffs() cannot be replaced with ctz32() when the argument might be zero,
because ffs(0) returns 0 while ctz32(0) returns 32.
The ffs(3) call in sd_normal_command() is a special case though. It can
be converted to ctz32() + 1 because the argument is never zero:
if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) {
~~~~~~~~~~~~~~~
^--------------- req.arg cannot be zero
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-7-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are a number of ffs(3) callers that do roughly:
bit = ffs(val);
if (bit) {
do_something(bit - 1);
}
This pattern can be converted to ctz32() like this:
zeroes = ctz32(val);
if (zeroes != 32) {
do_something(zeroes);
}
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-6-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not clear from the code how a 0 parameter should be handled by the
hardware. Keep the same behavior as ffs(0) - 1 == -1.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-4-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not clear from the code how a 0 parameter should be handled by the
hardware. Keep the same behavior as ffs(0) - 1 == -1.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The binary search in sdp_uuid_match() only works when the number of
elements to search is a power of two.
lo = record->uuid;
hi = record->uuids;
while (hi >>= 1)
if (lo[hi] <= val)
lo += hi;
return *lo == val;
I noticed that the record->uuids calculation in
sdp_service_record_build() was suspect:
record->uuids = 1 << ffs(record->uuids - 1);
Unlike most ffs(val) - 1 users, the expression is ffs(val - 1)!
Actually ffs() is the wrong function to use for power-of-2. Use
pow2ceil() to achieve the correct effect. Now the record->uuid[] array
is sized correctly and the binary search in sdp_uuid_match() should
work.
I'm not sure how to run/test this code.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-2-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1426522925-14444-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The command "virsh create" will fail in such condition: vm has two
disks: vda and vdb. vda has snapshot s1 with id "1", vdb doesn't have
s1 but has snapshot s2 with id "1". When we want to run command "virsh
create s1", del_existing_snapshots() only deletes s1 in vda, and
bdrv_snapshot_create() tries to create vdb's snapshot s1 with id "1",
but id "1" alreay exists in vdb with name "s2"!
The simplest way is call find_new_snapshot_id() unconditionally.
Signed-off-by: Yi Wang <up2wing@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t4Wd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2015-04-27 (v2)
# gpg: Signature made Mon Apr 27 19:42:39 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Remove AMD feature flag aliases from CPU model table
target-i386: X86CPU::xlevel2 QOM property
target-i386: Make "level" and "xlevel" properties static
qemu-config: Accept empty option values
MAINTAINERS: Change status of X86 to Maintained
MAINTAINERS: Add myself to X86
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJVPnmrAAoJECgHk2+YTcWm9fkQALwhU06fh1C3zOqW162cYnPi
omkrj89606UzbpC9/NxP1XsjJcXysjD2Dn+yZ5F4WKwHOuqRcoj9wdp/PdE1+lUt
+Dwl3+c0waVmRm91fBA71EgkENGpd1+d0BmddAKhCcoM/R1qtH/RJBVmmojHnt7g
43uAVunV2PLpnW00nug4fJZnjS/MN3d5MDyJLw0AbaLLGDojG7r9sI6UMbOK8I2l
zjCX+RUDAzf4QPPszwvwD+2JsZOSUoqNRts42FxGe1AOMvH4REBnIJZzbFoZ58lr
tqL+1vJYx6HHvvZu0/gWSD4tmQenWelhlfVIig1L02srJKLq2Zw6oq18D9QOJXdd
7a/lkM+RRCFYwBQR/74ZIFEvS5VxtJzQbxpuHAf0A5tjHzV7E97Nz7SwvuSAAdCv
aKQSKqMa5aQFxCaUK6sl7u5X08Av9o6cNg2z7Ri+hFFVXQu1JIKoNFxPH9As/gDZ
YtGSrsVDBEYHxLF70iLXWEMdxM5j5Aec1HIBYWGXA930hSXDxZYRSFnbRhiPe7HI
wArOPvk81w/DrD0Pqy+4r9emxPsiDbAn/U03VYHVoSZXl6BbHN8gMnyF+X0sZT3f
kaLQEFihzTHron7b3nzfrFsktkbrRWnxCeqVhhMn0yPCZwJV6I/MD01FcDdTe7y0
f16IYLpvqMDTDT+HUt/d
=P+kR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging
NUMA queue, 2015-04-27
# gpg: Signature made Mon Apr 27 19:02:19 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/numa-pull-request:
MAINTAINERS: Add myself as NUMA code maintainer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hDRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150427' into staging
target-arm queue:
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
# gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150427:
Allow ARMv8 SCR.SMD updates
target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled
target-arm: rename c1_coproc to cpacr_el1
target-arm: Check watchpoints against CPU security state
target-arm: Use attribute info to handle user-only watchpoints
target-arm: Add user-mode transaction attribute
target-arm: Use correct memory attributes for page table walks
target-arm: Honour NS bits in page tables
Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
exec.c: Capture the memory attributes for a watchpoint hit
exec.c: Add new address_space_ld*/st* functions
exec.c: Make address_space_rw take transaction attributes
exec.c: Convert subpage memory ops to _with_attrs
Add MemTxAttrs to the IOTLB
Make CPU iotlb a structure rather than a plain hwaddr
memory: Replace io_mem_read/write with memory_region_dispatch_read/write
memory: Define API for MemoryRegionOps to take attrs and return status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When CPU vendor is AMD, the AMD feature alias bits on
CPUID[0x80000001].EDX are already automatically copied from CPUID[1].EDX
on x86_cpu_realizefn(). When CPU vendor is Intel, those bits are
reserved and should be zero. On either case, those bits shouldn't be set
in the CPU model table.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We already have "level" and "xlevel", only "xlevel2" is missing.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Static properties require only 1 line of code, much simpler than the
existing code that requires writing new getters/setters.
As a nice side-effect, this fixes an existing bug where the setters were
incorrectly allowing the properties to be changed after the CPU was
already realized.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently it is impossible to set an option in a config file to an empty
string, because the parser matches only lines containing non-empty
strings between double-quotes.
As sscanf() "[" conversion specifier only matches non-empty strings, add
a special case for empty strings.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
"Odd Fixes" doesn't reflect the current status of target-i386. We have
people looking after it, now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "srat" and "numa" keywords will help get_maintainer.pl catch
NUMA-related code in other files too.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Spice protocol uses cursor position on hotspot: the client is
applying hotspot offset when drawing the cursor.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Denis Kirjanov is busy getting spice run on ppc64 and trapped into this
one. Spice wire format is little endian, so we have to explicitly say
we want little endian when letting pixman convert the data for us.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Live migration with spice works like this today:
(1) client_migrate_info monitor cmd
(2) spice server notifies client, client connects to target host.
(3) qemu waits until spice client connect is finished.
(4) send over vmstate (i.e. main part of live migration).
(5) spice handover to target host.
(3) is implemented by making client_migrate_info a async monitor
command. This is the only async monitor command we have.
The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel. That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.
Time to drop step (3). This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK2 sends the accel key to the guest when switching to the graphic
console via that shortcut. Resolve this by ignoring any keys until the
next key-release event. However, do not ignore keys when switching via
the menu or when on GTK3.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least on GTK2, the VTE terminal has to be specified as target of
gtk_widget_grab_focus. Otherwise, switching from one VTE terminal to
another causes the focus to get lost.
CC: John Snow <jsnow@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fixed build with CONFIG_VTE=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1429888797-4378-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a TODO in bp_wp_matches() now that we have a function for
testing whether the CPU is currently in Secure mode or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Now that we have memory access attribute information in the watchpoint
checking code, we can correctly implement handling of watchpoints
which should match only on userspace accesses, where LDRT/STRT/LDT/STT
from EL1 are treated as userspace accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Capture the memory attributes for the transaction which triggered
a watchpoint; this allows CPU specific code to implement features
like ARM's "user-mode only WPs also hit for LDRT/STRT accesses
made from privileged code". This change also correctly passes
through the memory attributes to the underlying device when
a watchpoint access doesn't hit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add new address_space_ld*/st* functions which allow transaction
attributes and error reporting for basic load and stores. These
are named to be in line with the address_space_read/write/rw
buffer operations.
The existing ld/st*_phys functions are now wrappers around
the new functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Convert the subpage memory ops to _with_attrs; this will allow
us to pass the attributes through to the underlying access
functions. (Nothing uses the attributes yet.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a MemTxAttrs field to the IOTLB, and allow target-specific
code to set it via a new tlb_set_page_with_attrs() function;
pass the attributes through to the device when making IO accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make the CPU iotlb a structure rather than a plain hwaddr;
this will allow us to add transaction attributes to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rather than retaining io_mem_read/write as simple wrappers around
the memory_region_dispatch_read/write functions, make the latter
public and change all the callers to use them, since we need to
touch all the callsites anyway to add MemTxAttrs and MemTxResult
support. Delete io_mem_read and io_mem_write entirely.
(All the callers currently pass MEMTXATTRS_UNSPECIFIED
and convert the return value back to bool or ignore it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Define an API so that devices can register MemoryRegionOps whose read
and write callback functions are passed an arbitrary pointer to some
transaction attributes and can return a success-or-failure status code.
This will allow us to model devices which:
* behave differently for ARM Secure/NonSecure memory accesses
* behave differently for privileged/unprivileged accesses
* may return a transaction failure (causing a guest exception)
for erroneous accesses
This patch defines the new API and plumbs the attributes parameter through
to the memory.c public level functions io_mem_read() and io_mem_write(),
where it is currently dummied out.
The success/failure response indication is also propagated out to
io_mem_read() and io_mem_write(), which retain the old-style
boolean true-for-error return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Pretending that QMP doesn't understand a command merely because
we are not in the right mode doesn't help first-time users figure
out what to do to correct things. Although the documentation for
QMP calls out capabilities negotiation, we should also make it
clear in our error messages what we were expecting. With this
patch, I now get the following transcript:
$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"huh"}
{"error": {"class": "CommandNotFound", "desc": "The command huh has not been found"}}
{"execute":"quit"}
{"error": {"class": "CommandNotFound", "desc": "Expecting capabilities negotiation with 'qmp_capabilities' before command 'quit'"}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"qmp_capabilities"}
{"error": {"class": "CommandNotFound", "desc": "Capabilities negotiation is already complete, command 'qmp_capabilities' ignored"}}
{"execute":"quit"}
{"return": {}}
{"timestamp": {"seconds": 1429110729, "microseconds": 181935}, "event": "SHUTDOWN"}
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-By: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As far as the QMP parser is concerned, neither the 'O' nor the 'q' format specifiers
put any constraint on the command. However, there are two differences:
1) from a documentation point of view 'O' says that this command takes
a dictionary. The dictionary will be converted to QemuOpts in the
handler to match the corresponding HMP command.
2) 'O' sets QMP_ACCEPT_UNKNOWNS, resulting in the command accepting invalid
extra arguments. For example the following is accepted:
{ "execute": "send-key",
"arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
{ "type": "qcode", "data": "alt" },
{ "type": "qcode", "data": "delete" } ], "foo": "bar" } }
Neither send-key nor migrate-set-capabilities take a QemuOpts-like
dictionary; they take an array of dictionaries. And neither command
really wants to have extra unknown arguments. Thus, the right
specifier to use in this case is 'q'; with this patch the above
command fails with
{"error": {"class": "GenericError", "desc": "Invalid parameter 'foo'"}}
as intended.
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
