GDB single-stepping is now handled generically.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous placement in tcg/tcg.h was not logical.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason
why it should do this; include it directly from the C files which require
it, and drop the include line in qemu.h.
(Note that several of the C files previously relying on this indirect
include were going out of their way to only include gdbstub.h conditionally
on not CONFIG_USER_ONLY!)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always provide the atomic interface using TCGMemOpIdx oi
and uintptr_t retaddr. Rename from helper_* to cpu_* so
as to (mostly) match the exec/cpu_ldst.h functions, and
to emphasize that they are not callable from TCG directly.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will shortly be interested in distinguishing pointers
from integers in the helper's declaration, as well as a
true void return. We currently have two parallel 1 bit
fields; merge them and expand to a 3 bit field.
Our current maximum is 7 helper arguments, plus the return
makes 8 * 3 = 24 bits used within the uint32_t typemask.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an enumeration instead of raw 32/64/80 values.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The m68k trace mode is controlled by the top 2 bits in the SR register. Implement
the m68k "any instruction" trace mode where bit T1=1 and bit T0=0 in which the CPU
generates an EXCP_TRACE exception (vector 9 or offset 0x24) after executing each
instruction.
This functionality is used by the NetBSD kernel debugger to allow single-stepping
on m68k architectures.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210519142917.16693-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Introduce a new gen_singlestep_exception() function to be called when generating
the EXCP_DEBUG exception in single-step mode rather than calling
gen_raise_exception(EXCP_DEBUG) directly. This allows for the single-step
exception behaviour for all callers to be managed in a single place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210519142917.16693-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to consolidate the single-step exception handling into a single
helper, change gen_jmp_tb() so that it calls gen_raise_exception() directly
instead of gen_exception(). This ensures that all single-step exceptions are
now handled directly by gen_raise_exception().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210519142917.16693-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m68k translator currently checks the DisasContextBase singlestep_enabled
boolean directly to determine whether to single-step execution. Soon
single-stepping may also be triggered by setting the appropriate bits in the
SR register so centralise the check into a single is_singlestepping()
function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210519142917.16693-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040UM Appendix D the requirement for data accesses to be
word aligned is only for the 68000, 68008 and 68010 CPUs. Later CPUs from the
68020 onwards will allow unaligned data accesses but at the cost of being less
efficient.
Add a new M68K_FEATURE_UNALIGNED_DATA feature to specify that data accesses are
not required to be word aligned, and don't perform the alignment on the stack
pointer when taking an exception if this feature is not selected.
This is required because the MacOS DAFB driver attempts to call an A-trap
with a byte-aligned stack pointer during initialisation and without this the
stack pointer is off by one when the A-trap returns.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move the feature comment from after the feature name to the preceding line to
allow for longer feature names and descriptions without hitting the 80
character line limit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210308121155.2476-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If a NuBus slot doesn't contain a card, the Quadra hardware generates a physical
bus error if the CPU attempts to access the slot address space. Both Linux and
MacOS use a separate bus error handler during NuBus accesses in order to detect
and recover when addressing empty slots.
According to the MC68040 users manual the ATC bit of the SSW is used to
distinguish between ATC faults and physical bus errors. MacOS specifically checks
the stack frame generated by a NuBus error and panics if the SSW ATC bit is set.
Update m68k_cpu_transaction_failed() so that the SSW ATC bit is not set if the
memory API returns MEMTX_DECODE_ERROR which will be used to indicate that an
access to an empty NuBus slot occurred.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210308121155.2476-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is needed to boot MacOS ROM.
Pull the condition code and the program counter from the stack.
Operation:
(SP) -> CCR
SP + 2 -> SP
(SP) -> PC
SP + 4 -> SP
This operation is not privileged.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210307212552.523552-1-laurent@vivier.eu>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210208113428.7181-3-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-12-alex.bennee@linaro.org>
On m68k there are two varities of stack pointers: USP with SSP or ISP/MSP.
Only the 68020/30/40 support the MSP register the stack swap helpers don't
support this feature.
This patch adds this support, as well as comments to CPUM68KState to
make it clear how stacks are handled
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c61ad2d8b39f3b03b431819b6bf602a1c332b921.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add CPU class detection for each CR type in the m68k_move_to/from helpers,
so that it throws and exception if an unsupported register is requested
for that CPU class.
Reclassified MOVEC insn. as only supported from 68010.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <fc0d0187478716f05d990949347071969b743151.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The BUSCR/PCR CR defines were missing for 68060, and the move_to/from helper
functions were also missing a decode for the 68060 M68K_CR_CAAR CR register.
Added missing defines, and respective decodes for all three CR registers to
the helpers.
Although this patch defines them, the implementation is empty in this patch
and these registers will result in a cpu abort - which is the default prior
to this patch.
This patch aims to reach full coverage of all CR registers within the helpers.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <19e5c0fa8baed6479ed0502fd3deb132d19457fb.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add more detailed comments to each case of m68k_move_to/from helpers to list
the supported CPUs for that CR as they were wrong in some cases, and
missing some cpu classes in other cases.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a8bd70b66e3dbdb7d2ab7a852af71cdbf341d50c.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m680XX_cpu_initfn functions have been rearranged to cascade starting from
the base 68000, so that the 68010 then inherits from this, and so on until the
68060.
This makes it simpler to track features since in most cases the m68k were
product enhancements on each other, with only a few instructions being retired.
Because each cpu class inherits the previous CPU class, then for example
the 68020 also has the feature 68010, and 68000 and so on upto the 68060.
- Added 68010 cpu class, and moved correct features into 68000/68010.
- Added m68k_unset_feature to allow removing a feature in the inheritence
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c652fe7537f8b4fe87a13ecbbc0ea751fb71532f.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Improvement in comments for the instantiation functions.
This is to highlight what each cpu class, in the 68000 series, contains
in terms of instructions/features.
Signed-off-by: Lucien Murray-Pitts <lucienmp.qemu@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2dfe32672ee6ddce4b54c6bcfce579d35abeaf51.1612137712.git.balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
Use the machine properties instead.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
