Commit Graph

217 Commits

Author SHA1 Message Date
Richard Henderson
94bf265867 target/ppc: Use atomic load for LQ and LQARX
Section 1.4 of the Power ISA v3.0B states that both of these
instructions are single-copy atomic.  As we cannot (yet) issue
128-bit loads within TCG, use the generic helpers provided.

Since TCG cannot (yet) return a 128-bit value, add a slot within
CPUPPCState for returning the high half of a 128-bit return value.
This solution is preferred to the helper assigning to architectural
registers directly, as it avoids clobbering all TCG live values.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:52 +10:00
BALATON Zoltan
0c8d8c8b8f target/ppc: Add missing opcode for icbt on PPC440
According to PPC440 User Manual PPC440 has multiple opcodes for icbt
instruction: one for compatibility with older cores and two 440
specific opcodes one of which is defined in BookE. QEMU only
implements two of these, add the missing one.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-21 21:22:53 +10:00
Cédric Le Goater
c8fd8373e4 target/ppc: extend eieio for POWER9
POWER9 introduced a new variant of the eieio instruction using bit 6
as a hint to tell the CPU it is a store-forwarding barrier.

The usage of this eieio extension was recently added in Linux 4.17
which activated the "support for a store forwarding barrier at kernel
entry/exit".

Unfortunately, it is not possible to insert this new eieio instruction
without considerable change in ppc_tr_translate_insn(). So instead we
loosen the QEMU eieio instruction mask and modify the gen_eieio()
helper to test for bit6. On non-POWER9 CPUs, the bit6 is just ignored
but a warning is emitted as this is not an instruction software should
be using.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12 10:44:36 +10:00
Thomas Huth
3108533829 target/ppc: Use proper logging function for possible guest errors
fprintf() and qemu_log_separate() are frowned upon these days for printing
logging information in QEMU. Accessing the wrong SPRs indicates wrong guest
behaviour in most cases, and we've got a proper way to log such situations,
which is the qemu_log_mask(LOG_GUEST_ERROR, ...) function. So use this
function now for logging the bad SPR accesses instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12 09:33:52 +10:00
Richard Henderson
07ea28b418 tcg: Pass tb and index to tcg_gen_exit_tb separately
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument.  We can also do some more
sanity checking of the index argument.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01 15:15:27 -07:00
Richard Henderson
685f1ce236 target/ppc: Honor CPU_DUMP_FPU
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-18 14:52:38 -07:00
Peter Maydell
9ba1733a76 * Don't silently truncate extremely long words in the command line
* dtc configure fixes
 * MemoryRegionCache second try
 * Deprecated option removal
 * add support for Hyper-V reenlightenment MSRs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJa9Y2qAAoJEL/70l94x66Df8EIAI4pi+zf1mTlH0Koi+oqOg+d
 geBC6N9IA+n1p90XERnPbuiT19NjON2R1Z907SbzDkijxdNRoYUoQf7Z+ZBTENjn
 dYsVvgLYzajGLWWtJetPPaNFAqeF2z8B3lbVQnGVLzH5pQQ2NS1NJsvXQA2LslLs
 2ll1CJ2EEBhayoBSbHK+0cY85f+DUgK/T1imIV2T/rwcef9Rw218nvPfGhPBSoL6
 tI2xIOxz8bBOvZNg2wdxpaoPuDipBFu6koVVbaGSgXORg8k5CEcKNxInztufdELW
 KZK5ORa3T0uqu5T/GGPAfm/NbYVQ4aTB5mddshsXtKbBhnbSfRYvpVsR4kQB/Hc=
 =oC1r
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs

# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (29 commits)
  rename included C files to foo.inc.c, remove osdep.h
  pc-dimm: fix error messages if no slots were defined
  build: Silence dtc directory creation
  shippable: Remove Debian 8 libfdt kludge
  configure: Display if libfdt is from system or git
  configure: Really use local libfdt if the system one is too old
  i386/kvm: add support for Hyper-V reenlightenment MSRs
  qemu-doc: provide details of supported build platforms
  qemu-options: Remove deprecated -no-kvm-irqchip
  qemu-options: Remove deprecated -no-kvm-pit-reinjection
  qemu-options: Bail out on unsupported options instead of silently ignoring them
  qemu-options: Remove remainders of the -tdf option
  qemu-options: Mark -virtioconsole as deprecated
  target/i386: sev: fix memory leaks
  opts: don't silently truncate long option values
  opts: don't silently truncate long parameter keys
  accel: use g_strsplit for parsing accelerator names
  update-linux-headers: drop hyperv.h
  qemu-thread: always keep the posix wrapper layer
  exec: reintroduce MemoryRegion caching
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-14 09:55:09 +01:00
Paolo Bonzini
5b27a92dcc rename included C files to foo.inc.c, remove osdep.h
osdep.h is only needed for files that are compiled directly.
Remove it from included C source files, and rename them to
*.inc.c so that scripts/clean-includes knows to skip them.

Cc: Eric Blake <eblake@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-11 14:33:40 +02:00
Emilio G. Cota
b542683d77 translator: merge max_insns into DisasContextBase
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09 10:12:21 -07:00
Cédric Le Goater
4a7518e0fd target/ppc: add basic support for PTCR on POWER9
The Partition Table Control Register (PTCR) is a hypervisor privileged
SPR. It contains the host real address of the Partition Table and its
size.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-05-04 09:56:27 +10:00
David Gibson
0941d728a4 target/ppc: Get rid of POWERPC_MMU_VER() macros
These macros were introduced to deal with the fact that the mmu_model
field has bit flags mixed in with what's otherwise an enum of various mmu
types.

We've now eliminated all those flags except for one, and that one -
POWERPC_MMU_64 - is already included/compared in the MMU_VER macros.  So,
we can get rid of those macros and just directly compare mmu_model values
in the places it was used.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
2018-04-27 18:05:22 +10:00
BALATON Zoltan
99d45f8fbd target/ppc: Fix reserved bit mask of dstst instruction
According to the Vector/SIMD extension documentation bit 6 that is
currently masked is valid (listed as transient bit) but bits 7 and 8
should be reserved instead. Fix the mask to match this.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-27 18:05:22 +10:00
David Gibson
e69ba2b489 target/ppc: Initialize lazy_tlb_flush correctly
ppc_tr_init_disas_context() correctly sets lazy_tlb_flush to true on
certain CPU models.  However, it leaves it uninitialized, instead of
setting it to false on all others.

It wasn't caught before now because we didn't have examples in the tests
that exercised this path.  However it can now be caught using clang's
undefined behaviour sanitizer and the sam460ex board.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
2018-04-10 10:05:38 +10:00
Cédric Le Goater
91c60f124e target/ppc: fix tlbsync to check privilege level depending on GTSE
tlbsync also needs to check the Guest Translation Shootdown Enable
(GTSE) bit in the Logical Partition Control Register (LPCR) to
determine at which privilege level it is running.

See commit c6fd28fd57 ("target/ppc: Update tlbie to check privilege
level based on GTSE")

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-18 21:03:20 +11:00
Emilio G. Cota
b0c2d5213a target/ppc: convert to TranslatorOps
A few changes worth noting:

- Didn't migrate ctx->exception to DISAS_* since the exception field is
  in many cases architecturally relevant.

- Moved the cross-page check from the end of translate_insn to tb_start.

- Removed the exit(1) after a TCG temp leak; changed the fprintf there to
  qemu_log.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-16 12:14:39 +11:00
Emilio G. Cota
b6bac4bc70 target/ppc: convert to DisasContextBase
A couple of notes:

- removed ctx->nip in favour of base->pc_next. Yes, it is annoying,
  but didn't want to waste its 4 bytes.

- ctx->singlestep_enabled does a lot more than
  base.singlestep_enabled; this confused me at first.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-16 12:14:39 +11:00
Cédric Le Goater
7af1e7b022 target/ppc: add support for hypervisor doorbells on book3s CPUs
The hypervisor doorbells are used by skiboot and Linux on POWER9
processors to wake up secondaries.

This adds processor control support to the Server architecture by
reusing the Embedded support. They are very similar, only the bits
definition of the CPU identifier differ.

Still to be done is message broadcast to all threads of the same
processor.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-20 17:15:05 +11:00
pbonzini@redhat.com
b62b368627 target-ppc: optimize cmp translation
We know that only one bit (in addition to SO) is going to be set in
the condition register, so do two movconds instead of three setconds,
three shifts and two ORs.

For ppc64-linux-user, the code size reduction is around 5% and the
performance improvement slightly less than 10%.  For softmmu, the
improvement is around 5%.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-20 17:15:05 +11:00
Cédric Le Goater
ebca5e6d5e target/ppc: msgsnd and msgclr instructions need hypervisor privilege
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-20 17:15:05 +11:00
Richard Henderson
f764718d0c tcg: Remove TCGV_UNUSED* and TCGV_IS_UNUSED*
These are now trivial sets and tests against NULL.  Unwrap.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29 12:43:39 -08:00
Richard Henderson
c4a2e3a970 target/ppc: Use tcg_gen_lookup_and_goto_ptr
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15 09:49:23 +11:00
Peter Maydell
6e6430a821 Capstone disassembler
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ8bGHAAoJEGTfOOivfiFfOXQH/jc3BbQ+ulxvQSgA3rI2JE1e
 Ww5FK5HEs4qZU3hz4EtE2Cd5p7qV5I4tWRtbxzc6BGBwLsfz3a60Abx7726sZiH0
 ZuULTsWXQ/71XfZHQysgOSoy36G8xj/1yvrMWHjDCfWp/pzz479YXWSSn2TWEHpI
 jI6nKP5ALdv5XTAaglGaNzqVeWgjKXJn4O8qZFS7axj7hndzLFguymfm8rV8DAdd
 LRuYWOizzzJ0dcaO/HHyLTzSl7rR0g+DmcOAuFCREy4f+r6tXijwiirB5f7ZJiqc
 hgEBq/6NfztW2+pAUSxqI2Kuq1zVETTpZORH1+UxvVk9GPu1ouYldMx0NrYhDtc=
 =fC5W
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into staging

Capstone disassembler

# gpg: Signature made Thu 26 Oct 2017 10:57:27 BST
# gpg:                using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-dis-20171026:
  disas: Add capstone as submodule
  disas: Remove monitor_disas_is_physical
  ppc: Support Capstone in disas_set_info
  arm: Support Capstone in disas_set_info
  i386: Support Capstone in disas_set_info
  disas: Support the Capstone disassembler library
  disas: Remove unused flags arguments
  target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY
  target/arm: Move BE32 disassembler fixup
  target/ppc: Convert to disas_set_info hook
  target/i386: Convert to disas_set_info hook

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	target/i386/cpu.c
#	target/ppc/translate_init.c
2017-10-27 08:04:51 +01:00
Richard Henderson
1d48474d8e disas: Remove unused flags arguments
Now that every target is using the disas_set_info hook,
the flags argument is unused.  Remove it.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25 11:55:09 +02:00
Richard Henderson
0eea8cdd6d target/ppc: Convert to disas_set_info hook
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-25 11:41:42 +02:00
Richard Henderson
1c2adb958f tcg: Initialize cpu_env generically
This is identical for each target.  So, move the initialization to
common code.  Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.

This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
b1311c4acf tcg: define tcg_init_ctx and make tcg_ctx a pointer
Groundwork for supporting multiple TCG contexts.

The core of this patch is this change to tcg/tcg.h:

> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;

Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota
c5a49c63fa tcg: convert tb->cflags reads to tb_cflags(tb)
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.

Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.

Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:

FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
	 accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)

perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES

Then manually fixed the few errors that checkpatch reported.

Compile-tested for all targets.

Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:41 -07:00
Richard Henderson
55c3ceef61 qom: Introduce CPUClass.tcg_initialize
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.

Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 22:00:13 +02:00
Richard Henderson
11f4e8f8bf tcg: Remove TCGV_EQUAL*
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison.  Now that we use pointers, this is just clutter.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 21:50:15 +02:00
Sandipan Das
af1c259f6d target/ppc: Fix carry flag setting for shift algebraic instructions
For POWER ISA v3.0, the XER bit CA32 needs to be set by the shift
right algebraic instructions whenever the CA bit is to be set. This
change affects the following instructions:
  * Shift Right Algebraic Word (sraw[.])
  * Shift Right Algebraic Word Immediate (srawi[.])
  * Shift Right Algebraic Doubleword (srad[.])
  * Shift Right Algebraic Doubleword Immediate (sradi[.])

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-10-17 10:34:00 +11:00
Marc-André Lureau
f0704d78b4 ppc: use DIV_ROUND_UP
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31 12:29:07 +02:00
Lluís Vilanova
9c489ea6be tcg: Pass generic CPUState to gen_intermediate_code()
Needed to implement a target-agnostic gen_intermediate_code()
in the future.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:16 -07:00
Philippe Mathieu-Daudé
e2622073e0 target/ppc: optimize various functions using extract op
Done with the Coccinelle semantic patch
scripts/coccinelle/tcg_gen_extract.cocci.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170718045540.16322-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:16 -07:00
Suraj Jitindar Singh
c88305027d target/ppc: Change tlbie invalid fields for POWER9 support
The tlbie[l] instructions are used to invalidate TLB entries used to cache
address translations.

In ISAv3.00 (POWER9) more fields were added to the tblie[l] instructions
which were previously invalid. We don't care about any of these new fields
since we just invalidate the whole world anyway but we need to not
cause an illegal instruction exception when the instructions are called.
We also don't want to allow an older processor to have these fields set
since that would be invalid.

Add a new GEN_HANDLER for the ISAv3 instructions with the correct invalid
mask. These will only be generated to a POWER9 processor for now based on
the instruction flag. Also remove the PPC_MEM_TLBIE instruction flag from
the POWER9 processor definition to ensure the old tlbie isn't generated.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Suraj Jitindar Singh
c6fd28fd57 target/ppc: Update tlbie to check privilege level based on GTSE
The Guest Translation Shootdown Enable (GTSE) bit in the Logical Partition
Control Register (LPCR) can be set to enable a guest to use the tlbie
instruction directly to invalidate translations.

When the GTSE bit is set then the tlbie instruction is supervisor
privileged, otherwise it is hypervisor privileged.

Add a guest translation shootdown enable (gtse) field to the diassembly
context and use this to check the correct privilege level at code
generation time.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Nikunj A Dadhania
4771df23ed target/ppc: Generate fence operations
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:14 +10:00
Nikunj A Dadhania
253ce7b2cf target/ppc: Emulate LL/SC using cmpxchg helpers
Emulating LL/SC with cmpxchg is not correct, since it can suffer from
the ABA problem. However, portable parallel code is written assuming
only cmpxchg which means that in practice this is a viable alternative.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:14 +10:00
Nikunj A Dadhania
38a61d3487 target/ppc: fix cpu_ov setting for 32-bit
A bug was introduced in following commit:

    dc0ad84 target/ppc: update overflow flags for add/sub

As for 32-bit ppc target extracting bit 63 for overflow is not correct.
Made it dependent on TARGET_LOG_BITS. This had broken booting MacOS
9.2.1 image

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-03-14 11:27:23 +11:00
Sam Bobroff
ec975e839c spapr: Small cleanup of PPC MMU enums
The PPC MMU types are sometimes treated as if they were a bit field
and sometime as if they were an enum which causes maintenance
problems: flipping bits in the MMU type (which is done on both the 1TB
segment and 64K segment bits) currently produces new MMU type
values that are not handled in every "switch" on it, sometimes causing
an abort().

This patch provides some macros that can be used to filter out the
"bit field-like" bits so that the remainder of the value can be
switched on, like an enum. This allows removal of all of the
"degraded" types from the list and should ease maintenance.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-03 11:30:59 +11:00
Suraj Jitindar Singh
4f4f28ffc1 target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
POWER9 doesn't have a storage description register 1 (SDR1) which is used
to store the base and size of the hash table. Thus we don't need to
generate this register on the POWER9 cpu model. While we're here, the
register generation code for 970, POWER5+, POWER<7/8/9> in general is a
mess where we call a generic function from a model specific function which
then attempts to call model specific functions, so rework this for
readability.

We update ppc_cpu_dump_state so that "info registers" will only display
the value of sdr1 if the register has been generated.

As mentioned above the register generation for the pcc->init_proc
function for 970, POWER5+, POWER7, POWER8 and POWER9 has been reworked
for improved clarity. Instead of calling init_proc_book3s_64 which then
attempts to generate the correct registers through a mess of if statements,
we remove this function and instead call the appropriate register
generation functions directly. This follows the register generation model
used for earlier cpu models (pre-970) whereby cpu specific registers are
generated directly in the init_proc function and makes it easier to
add/remove specific registers for new cpu models.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-03 11:30:59 +11:00
Nikunj A Dadhania
b63d043418 target/ppc: add mcrxrx instruction
mcrxrx: Move to CR from XER Extended

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
c44027ffb9 target/ppc: add ov32 flag in divide operations
Add helper_div_compute_ov() in the int_helper for updating the overflow
flags.

For Divide Word:
SO, OV, and OV32 bits reflects overflow of the 32-bit result

For Divide DoubleWord:
SO, OV, and OV32 bits reflects overflow of the 64-bit result

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
61aa9a697a target/ppc: add ov32 flag for multiply low insns
For Multiply Word:
SO, OV, and OV32 bits reflects overflow of the 32-bit result

For Multiply DoubleWord:
SO, OV, and OV32 bits reflects overflow of the 64-bit result

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
1480d71cbe target/ppc: use tcg ops for neg instruction
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
dc0ad84449 target/ppc: update overflow flags for add/sub
* SO and OV reflects overflow of the 64-bit result in 64-bit mode and
  overflow of the low-order 32-bit result in 32-bit mode

* OV32 reflects overflow of the low-order 32-bit independent of the mode

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
33903d0aa4 target/ppc: update ca32 in arithmetic substract
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
6b10d008a0 target/ppc: update ca32 in arithmetic add
Adds routine to compute ca32 - gen_op_arith_compute_ca32

For 64-bit mode use the compute ca32 routine. While for 32-bit mode, CA
and CA32 will have same value.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
dd09c36159 target/ppc: support for 32-bit carry and overflow
POWER ISA 3.0 adds CA32 and OV32 status in 64-bit mode. Add the flags
and corresponding defines.

Moreover, CA32 is updated when CA is updated and OV32 is updated when OV
is updated.

Arithmetic instructions:
    * Addition and Substractions:

        addic, addic., subfic, addc, subfc, adde, subfe, addme, subfme,
        addze, and subfze always updates CA and CA32.

        => CA reflects the carry out of bit 0 in 64-bit mode and out of
           bit 32 in 32-bit mode.
        => CA32 reflects the carry out of bit 32 independent of the
           mode.

        => SO and OV reflects overflow of the 64-bit result in 64-bit
           mode and overflow of the low-order 32-bit result in 32-bit
           mode
        => OV32 reflects overflow of the low-order 32-bit independent of
           the mode

    * Multiply Low and Divide:

        For mulld, divd, divde, divdu and divdeu: SO, OV, and OV32 bits
        reflects overflow of the 64-bit result

        For mullw, divw, divwe, divwu and divweu: SO, OV, and OV32 bits
        reflects overflow of the 32-bit result

     * Negate with OE=1 (nego)

       For 64-bit mode if the register RA contains
       0x8000_0000_0000_0000, OV and OV32 are set to 1.

       For 32-bit mode if the register RA contains 0x8000_0000, OV and
       OV32 are set to 1.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Nikunj A Dadhania
1bd33d0d7c target/ppc: optimize gen_write_xer()
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:38 +11:00
Nikunj A Dadhania
c09cec683b target-ppc: add wait instruction
Use the available wait instruction implementation.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Nikunj A Dadhania
62d897ca8b target-ppc: add slbsync implementation
slbsync: SLB Synchoronize

The instruction provides an ordering function for the effects of all
slbieg instructions executed by the thread executing the slbsync
instruction.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Nikunj A Dadhania
a63f1dfc62 target-ppc: add slbieg instruction
slbieg: SLB Invalidate Entry Global

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Nikunj A Dadhania
80b8c1ee05 target-ppc: generate exception for copy/paste
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:28 +11:00
Balamuruhan S
a34011881c target-ppc: implement store atomic instruction
stwat: Store Word Atomic
stdat: Store Doubleword Atomic

The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.

Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ implement stdat, use macro and combine both implementation ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:27 +11:00
Balamuruhan S
a68a614673 target-ppc: implement load atomic instruction
lwat: Load Word Atomic
ldat: Load Doubleword Atomic

The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.

Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ combine both lwat/ldat implementation using macro ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22 11:28:27 +11:00
Suraj Jitindar Singh
b8b4576e09 tcg/POWER9: NOOP the cp_abort instruction
The cp_abort instruction is used to remove the state of an in progress
copy paste sequence. POWER9 compilers add this in various places, such
as context switches which causes illegal instruction signals since we
don't yet implement this instruction.

Given there is no implementation of the copy paste facility and that we
don't claim to support it, we can just noop this instruction.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-02 09:30:06 +11:00
Suraj Jitindar Singh
d801a61e98 target/ppc/debug: Print LPCR register value if register exists
It can be useful when debugging to print the LPCR value.

Thus we add the LPCR to the "info registers" output if the register had
been defined.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-02 09:30:06 +11:00
Nikunj A Dadhania
cdee0e72d0 target-ppc: implement stop instruction
Use the nap code.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:13 +11:00
Nikunj A Dadhania
d59ba58380 target-ppc: implement lxv/lxvx and stxv/stxvx
lxv:  Load VSX Vector
lxvx: Load VSX Vector Indexed

    Little/Big-endian Storage
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

    Vector load results:
    BE:
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

    LE:
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |E7|E6|E5|E4|E3|E2|E1|E0|F7|F6|F5|F4|F3|F2|F1|F0|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

stxv: Store VSX Vector
stxvx: Store VSX Vector Indexed

    Vector (8-bit elements) in BE:
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

    Vector (8-bit elements) in LE:
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |E7|E6|E5|E4|E3|E2|E1|E0|F7|F6|F5|F4|F3|F2|F1|F0|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

    Store results in following:
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
    |F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
    +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:12 +11:00
Nikunj A Dadhania
e3001664f1 target-ppc: implement stxsd and stxssp
stxsd:  Store VSX Scalar Dword
stxssp: Store VSX Scalar SP

Moreover, DQ-Form/DS-FORM instructions shares the same primary
opcode(0x3D). For DQ-FORM bits 29:31 are used, for DS-FORM bits 30:31
are used. Common routine to decode primary opcode(0x3D) -
ds-form/dq-form instructions is required.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:12 +11:00
Nikunj A Dadhania
5cb091a4fd target-ppc: implement lxsd and lxssp instructions
lxsd: Load VSX Scalar Dword
lxssp: Load VSX Scalar Single

Moreover, DS-Form instructions shares the same primary opcode, bits
30:31 are used to decode the instruction. Use a common routine to decode
primary opcode(0x39) - ds-form instructions and branch-out depending on
bits 30:31.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:12 +11:00
Nikunj A Dadhania
efa7319619 target-ppc: rename CRF_* defines as CRF_*_BIT
Add _BIT to CRF_[GT,LT,EQ_SO] and introduce CRF_[GT,LT,EQ,SO] for usage
without shifts in the code. This would simplify the code.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:12 +11:00
Bharata B Rao
985e3023f7 target-ppc: Consolidate instruction decode helpers
Move instruction decode helpers to target-ppc/internal.h so that some
of these can be used from outside of translate.c. This movement also
helps to get rid of some duplicate helpers from target-ppc/fpu_helper.c.

Suggested-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:12 +11:00
Richard Henderson
7977000220 target-ppc: Use ctpop helper
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:48:57 -08:00
Richard Henderson
9b8514e56e target-ppc: Use clz and ctz opcodes
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson
7b4d326f47 target-ppc: Use the new deposit and extract ops
Use the new primitives for RDWINM and RLDICL.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:10 -08:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00