Introduce an API for some shared splittable resource, like memory.
It's going to be used by backup. Backup uses both read/write io and
copy_range. copy_range may consume memory implictly, so the new API is
abstract: it doesn't allocate any real memory but only hands out
tickets.
The idea is that we have some total amount of something and callers
should wait in coroutine queue if there is not enough of the resource
at the moment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Merge copying code into one function block_copy_do_copy, which only
calls bdrv_ io functions and don't do any synchronization (like dirty
bitmap set/reset).
Refactor block_copy() function so that it takes full decision about
size of chunk to be copied and does all the synchronization (checking
intersecting requests, set/reset dirty bitmaps).
It will help:
- introduce parallel processing of block_copy iterations: we need to
calculate chunk size, start async chunk copying and go to the next
iteration
- simplify synchronization improvement (like memory limiting in
further commit and reducing critical section (now we lock the whole
requested range, when actually we need to lock only dirty region
which we handle at the moment))
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Large copy range may imply memory allocation and large io effort, so
using 2G copy range request may be bad idea. Let's limit it to 16 MiB.
It also helps the following patch to refactor copy-with-offload
fallback to copy-with-bounce-buffer.
Note, that total memory usage of backup is still not limited, it will
be fixed in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move bounce_buffer allocation block_copy_with_bounce_buffer. This
commit simplifies further work on implementing copying by larger chunks
(of different size) and further asynchronous handling of block_copy
iterations (with help of block/aio_task API).
Allocation works fast, a lot faster than disk io, so it's not a problem
that we now allocate/free bounce_buffer more times. And we anyway will
have to allocate several bounce_buffers for parallel execution of loop
iterations in future.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sockets should be placed into $SOCK_DIR instead of $TEST_DIR, so remove
the $TEST_DIR filter from _filter_nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-24-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-23-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-22-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-21-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-17-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-16-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-14-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In addition, drop the nbd_unix_socket assignment in 241 because it does
not really do anything.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-6-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-5-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Specifying this optional parameter allows creating temporary files in
other directories than the test_dir; for example in sock_dir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unix sockets generally have a maximum path length. Depending on your
$TEST_DIR, it may be exceeded and then all tests that create and use
Unix sockets there may fail.
Circumvent this by adding a new scratch directory specifically for
Unix socket files. It defaults to a temporary directory (mktemp -d)
that is completely removed after the iotests are done.
(By default, mktemp -d creates a /tmp/tmp.XXXXXXXXXX directory, which
should be short enough for our use cases.)
Use mkdir -p to create the directory (because it seems right), and do
the same for $TEST_DIR (because there is no reason for that to be
created in any different way).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191017133155.5327-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This reverts commit 9adc1cb49a.
"mirror: Only mirror granularity-aligned chunks"
Since previous commit unaligned chunks are supported by
do_sync_target_write.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191011090711.19940-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Prior 9adc1cb49a do_sync_target_write had a bug: it reset aligned-up
region in the dirty bitmap, which means that we may not copy some bytes
and assume them copied, which actually leads to producing corrupted
target.
So 9adc1cb49a forced dirty bitmap granularity to be
request_alignment for mirror-top filter, so we are not working with
unaligned requests. However forcing large alignment obviously decreases
performance of unaligned requests.
This commit provides another solution for the problem: if unaligned
padding is already dirty, we can safely ignore it, as
1. It's dirty, it will be copied by mirror_iteration anyway
2. It's dirty, so skipping it now we don't increase dirtiness of the
bitmap and therefore don't damage "synchronicity" of the
write-blocking mirror.
If unaligned padding is not dirty, we just write it, no reason to touch
dirty bitmap if we succeed (on failure we'll set the whole region
ofcourse, but we loss "synchronicity" on failure anyway).
Note: we need to disable dirty_bitmap, otherwise we will not be able to
see in do_sync_target_write bitmap state before current operation. We
may of course check dirty bitmap before the operation in
bdrv_mirror_top_do_write and remember it, but we don't need active
dirty bitmap for write-blocking mirror anyway.
New code-path is unused until the following commit reverts
9adc1cb49a.
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191011090711.19940-5-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add blk write function with qiov_offset parameter. It's needed for the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191011090711.19940-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
do_sync_target_write is called from bdrv_mirror_top_do_write after
write/discard operation, all inside active_write/active_write_settle
protecting us from mirror iteration. So the whole area is dirty for
sure, no reason to examine dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191011090711.19940-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Passing zero length to these functions leads to unpredicted results.
Zero-length set/reset may occur in active-mirror, on zero-length write
(which is unlikely, but not guaranteed to never happen).
Let's just do nothing on zero-length request.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191011090711.19940-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-7-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
(And skip the whole test if null-co is not whitelisted.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-6-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This lets tests use skip_if_unsupported() with a potentially variable
list of required formats.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-5-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
skip_if_unsupported() should use the stronger variant case_skip(),
because this allows it to be used even with setUp() (in a meaningful
way).
In the process, make it explicit what we expect the first argument of
the func_wrapper to be (namely something derived of QMPTestCase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-4-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
case_notrun() does not actually skip the current test case. It just
adds a "notrun" note and then returns to the caller, who manually has to
skip the test. Generally, skipping a test case is as simple as
returning from the current function, but not always: For example, this
model does not allow skipping tests already in the setUp() function.
Thus, add a QMPTestCase.case_skip() function that invokes case_notrun()
and then self.skipTest(). To make this work, we need to filter the
information on how many test cases were skipped from the unittest
output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 20190917092004.999-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use null-co basically everywhere in the iotests. Unless we want to
test null-aio specifically, we should use it instead (for consistency).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190917092004.999-2-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl2zTpwACgkQ+9DbCVqe
KkQm7Af/co4HilswuPFIdfHDlsxR4UzdEWjdzFVjZl/3eeV52tRD+46ybfxGRQkL
drbf5sekgnQmRZQw74l9FrXXnZmmVZk0rX7T45t/58gARZgrvDmkCqbUBE4DXQLz
Oleqdi6yOOH3N2oszu5skPB6qF8FvQesTrHzAh1KDyUG3mQIbV0mQNmAyVtvIzEz
Jpro16ar6/PeZfp8Elp7ysrWA80cZIKKwMQonBIdEF4OK1DCSnW/Szw3uj0Jbnkp
cSCiEprPhb94Dm2a8DKrIQrPpFzIUvDJQmCqYyiufB3KLsH5bfps0zs3NBY44GjV
sM6SmSExhwPAu5JvwnqM7tYw5RLeAA==
=KxjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-251019-3' into staging
Testing updates (split from mega PR)
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
# gpg: Signature made Fri 25 Oct 2019 20:35:56 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-251019-3:
tests/docker: update Travis image to a more current version
tests/docker: set HOST_ARCH if we don't have ARCH
travis.yml: --enable-debug-tcg to check-tcg
gitlab-ci.yml: Use libvdeplug-dev to compile-test the VDE network backend
travis.yml: cache the clang sanitizer build
tests/vm/netbsd: Disable IPv6
tests/vm: Let subclasses disable IPv6
cirrus.yml: add latest Xcode build target
travis.yml: bump Xcode 10 to latest dot release
travis.yml: Test the release tarball
travis.yml: Fix the ccache lines
travis.yml: Use newer version of libgnutls and libpng
travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-image
travis.yml: Add libvdeplug-dev to compile-test net/vde.c
travis.yml: reduce scope of the --enable-debug build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This isn't the latest one available on hub.docker.com but it does
match the ID reported by the Xenial builds running on Travis:
instance: ... travis-ci-sardonyx-xenial-1553530528-f909ac5
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As the docker rules want to be able to be run on a virgin unconfigured
checkout add a fallback and use it if we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds a whole bunch of asserts which will catch bugs you might
introduce into the TCG code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The libvdeplug-dev package is required to compile-test net/vde.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191016131002.29663-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Hopefully we'll see the same benefits as the other builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CirrusCI provides a mojave-xcode alias for the latest Xcode available.
Let's use it to make sure we track the latest releases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
According to:
https://docs.travis-ci.com/user/reference/osx/#macos-version
we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
