Commit Graph

12516 Commits

Author SHA1 Message Date
Marcelo Tosatti
e447b1a603 set proper migration status on ->write error (v5)
If ->write fails, declare migration status as MIG_STATE_ERROR.

Also, in buffered_file.c, ->close the object in case of an
error.

Fixes "migrate -d "exec:dd of=file", where dd fails to open file.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19 08:44:37 -05:00
Amit Shah
027c9e21e2 rtc: Remove TARGET_I386 from qemu-config.c, enables driftfix
qemu-config.c doesn't contain any target-specific code, and the
TARGET_I386 conditional code didn't get compiled as a result. Removing
this enables the driftfix parameter for rtc.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19 08:44:37 -05:00
Avi Kivity
5e77aaa0d7 QEMUFileBuffered: indicate that we're ready when the underlying file is ready
QEMUFileBuffered stops writing when the underlying QEMUFile is not ready,
and tells its producer so.  However, when the underlying QEMUFile becomes
ready, it neglects to pass that information along, resulting in stoppage
of all data until the next tick (a tenths of a second).

Usually this doesn't matter, because most QEMUFiles used with QEMUFileBuffered
are almost always ready, but in the case of exec: migration this is not true,
due to the small pipe buffers used to connect to the target process.  The
result is very slow migration.

Fix by detecting the readiness notification and propagating it.  The detection
is a little ugly since QEMUFile overloads put_buffer() to send it, but that's
the suject for a different patch.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19 08:44:37 -05:00
Artyom Tarasenko
9fc391f8b5 sparc escc IUS improvements (SunOS 4.1.4 fix)
According to scc_escc_um.pdf:
 - Reset Highest IUS must update irq status to allow processing
   of the next priority interrupt.
 - rx interrupt has always higher priority than tx on same channel

The documentation only explicitly says that Reset Highest IUS
command (0x38) clears IUS bits, not that it clears the corresponding
interrupt too, so don't clear interrupts on this command.

The patch allows SunOS 4.1.4 to use the serial ports

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 17:56:12 +00:00
Blue Swirl
68c18d1ccf Fix mingw32 build
Don't define qemu_chr_open_eventfd() on Windows.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:46:24 +00:00
Stefan Weil
cdfb017eb0 win32: Avoid compiler warning (WIN32_LEAN_AND_MEAN redefined)
configure adds the macro WIN32_LEAN_AND_MEAN to
QEMU_CFLAGS, and SDL_syswm.h defines it, too.

This results in a compiler warning (redefinition of
WIN32_LEAN_AND_MEAN in SDL_syswm.h. That warning prevents
compilations for win32 with warning = error).

Fix this by removing the definition of WIN32_LEAN_AND_MEAN
before including SDL_syswm.h.

[blauwirbel@gmail.com: rebased]
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:46:12 +00:00
Stefan Weil
0a1574bb13 win32: Add missing function setenv
Mingw32 does not provide a declaration and implementation of function
setenv (which is used in sdl.c), so this patch adds both.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:45:28 +00:00
Cam Macdonell
3dcbf8f9ca Disable build of ivshmem on non-KVM systems
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:44:53 +00:00
Cam Macdonell
1fd7401275 Add kvm_set_ioeventfd_mmio_long definition for non-KVM systems
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:44:47 +00:00
Andreas Färber
b1d6d51d95 TCG: Revert ppc64 tcg_out_movi32 change
3b6dac3416 apparently broke the ppc64 TCG target
compilation in the code path without guest base.

Reverting this line fixes the build.

Signed-off-by: Andreas F?rber <andreas.faerber@web.de>
Cc: malc <av1474@comtv.ru>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: malc <av1474@comtv.ru>
2010-08-15 00:57:40 +04:00
Andreas Färber
e9119cd864 TCG: Fix Darwin/ppc calling convention recognition
5da79c86a3 broke compilation on Mac OS X v10.5 ppc.
Apple's GCC 4.0.1 does not define _CALL_DARWIN. Recognize __APPLE__ again as well.

Signed-off-by: Andreas F?rber <andreas.faerber@web.de>
Cc: malc <av1474@comtv.ru>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: J?rgen Lock <nox@jelal.kn-bremen.de>
Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: malc <av1474@comtv.ru>
2010-08-15 00:40:42 +04:00
Cam Macdonell
6cbf4c8c64 RESEND: Inter-VM shared memory PCI device
resend for bug fix related to removal of irqfd

Support an inter-vm shared memory device that maps a shared-memory object as a
PCI device in the guest.  This patch also supports interrupts between guest by
communicating over a unix domain socket.  This patch applies to the qemu-kvm
repository.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]

Interrupts are supported between multiple VMs by using a shared memory server
by using a chardev socket.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
           [,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
    -chardev socket,path=<path>,id=<id>

The shared memory server, sample programs and init scripts are in a git repo here:

    www.gitorious.org/nahanni

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:16 -05:00
Cam Macdonell
2431296806 Support marking a device as non-migratable
A non-migratable device should be removed before migration and re-added after.

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Cam Macdonell
44f1a3d876 Add function to assign ioeventfd to MMIO.
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Cam Macdonell
b6828931eb Device specification for shared memory PCI device
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Cam Macdonell
84b89d782f Add qemu_ram_alloc_from_ptr function
Provide a function to add an allocated region of memory to the qemu RAM.

This patch is copied from Marcelo's qemu_ram_map() in qemu-kvm and given the
clearer name qemu_ram_alloc_from_ptr().

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Anthony Liguori
f040236cd5 Merge remote branch 'kwolf/for-anthony' into staging 2010-08-09 08:25:12 -05:00
Edgar E. Iglesias
a523eb06ec microblaze: Fix the target version of stat64 struct
MicroBlaze needs TARGET_STAT64_HAS_BROKEN_ST_INO.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-08-09 10:13:33 +02:00
malc
60592edde4 audio/sdl: return on error
Signed-off-by: malc <av1474@comtv.ru>
2010-08-07 20:04:24 +04:00
Edgar E. Iglesias
138afb024b mips: Add support for VInt and VEIC irq modes
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-08-06 12:21:16 +02:00
malc
d087bb3e38 audio/sdl: be more anal about errors
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06 13:15:31 +04:00
malc
4b7c0418c0 audio: make audio_pt_init block all signals
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06 13:15:22 +04:00
Gleb Natapov
14542fea73 kvm: remove guest triggerable abort()
This abort() condition is easily triggerable by a guest if it configures
pci bar with unaligned address that overlaps main memory.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-05 09:57:36 -03:00
Alex Williamson
70fedd76d9 kvm: Don't walk memory_size == 0 slots in kvm_client_migration_log
If we've unregistered a memory area, we should avoid calling
qemu_get_ram_ptr() on the left over phys_offset cruft in the
slot array.  Now that we support removing ramblocks, the
phys_offset ram_addr_t can go away and cause a lookup fault
and abort.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-05 09:57:35 -03:00
Blue Swirl
748a4ee311 sparc32: use FW_CFG_CMDLINE_SIZE
Add support for getting kernel command line size with
FW_CFG_CMDLINE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-03 21:00:58 +00:00
Andrea Arcangeli
953844d102 ide: Avoid canceling IDE DMA
The reason for not actually canceling the I/O is because with
virtualization and lots of VM running, a guest fs may mistake a
overload of the host, as an IDE timeout. So rather than canceling the
I/O, it's safer to wait I/O completion and simulate that the I/O has
completed just before the io cancellation was requested by the
guest. This way if ntfs or an app writes data without checking for
-EIO retval, and it thinks the write has succeeded, it's less likely
to run into troubles. Similar issues for reads.

Furthermore because the DMA operation is splitted into many synchronous
aio_read/write if there's more than one entry in the SG table, without this
patch the DMA would be cancelled in the middle, something we've no idea if it
happens on real hardware too or not. Overall this seems a great risk for zero
gain.

This approach is sure safer than previous code given we can't pretend all guest
fs code out there to check for errors and reply the DMA if it was completed
partially, given a timeout would never materialize on a real harddisk unless
there are defective blocks (and defective blocks are practically only an issue
for reads never for writes in any recent hardware as writing to blocks is the
way to fix them) or the harddisk breaks as a whole.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Markus Armbruster
4be9762adb block: Change bdrv_eject() not to drop the image
bdrv_eject() gets called when a device model opens or closes the tray.

If the block driver implements method bdrv_eject(), that method gets
called.  Drivers host_cdrom implements it, and it opens and closes the
physical tray, and nothing else.  When a device model opens, then
closes the tray, media changes only if the user actively changes the
physical media while the tray is open.  This is matches how physical
hardware behaves.

If the block driver doesn't implement method bdrv_eject(), we do
something quite different: opening the tray severs the connection to
the image by calling bdrv_close(), and closing the tray does nothing.
When the device model opens, then closes the tray, media is gone,
unless the user actively inserts another one while the tray is open,
with a suitable change command in the monitor.  This isn't how
physical hardware behaves.  Rather inconvenient when programs
"helpfully" eject media to give you a chance to change it.  The way
bdrv_eject() behaves here turns that chance into a must, which is not
what these programs or their users expect.

Change the default action not to call bdrv_close().  Instead, note the
tray status in new BlockDriverState member tray_open.  Use it in
bdrv_is_inserted().

Arguably, the device models should keep track of tray status
themselves.  But this is less invasive.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Kevin Wolf
336c1c1255 block: Fix bdrv_has_zero_init
Assuming that any image on a block device is not properly zero-initialized is
actually wrong: Only raw images have this problem. Any other image format
shouldn't care about it, they initialize everything properly themselves.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Yoshiaki Tamura
bd0858bb46 block migration: replace tabs by spaces.
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Miguel Di Ciurcio Filho
f0aa7a8b2d loadvm: improve tests before bdrv_snapshot_goto()
This patch improves the resilience of the load_vmstate() function, doing
further and better ordered tests.

In load_vmstate(), if there is any error on bdrv_snapshot_goto(), except if the
error is on VM state device, load_vmstate() will return zero and the VM will be
started with major corruption chances.

The current process:
- test if there is any writable device without snapshot support
    - if exists return -error
- get the device that saves the VM state, possible return -error but unlikely
because it was tested earlier
- flush I/O
- run bdrv_snapshot_goto() on devices
    - if fails, give an warning and goes to the next (not good!)
    - if fails on the VM state device, return zero (not good!)
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
    - if fails return -error
- open the file with the VM state
    - if fails return -error
- load the VM state
    - if fails return -error
- return zero

New behavior:
- get the device that saves the VM state
    - if fails return -error
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
    - if fails return -error
- test if there is any writable device without snapshot support
    - if exists return -error
- test if the devices with snapshot support have the requested snapshot
    - if anyone fails, return -error
- flush I/O
- run snapshot_goto() on devices
    - if anyone fails, return -error
- open the file with the VM state
    - if fails return -error
- load the VM state
    - if fails return -error
- return zero

do_loadvm must not call vm_start if any error has occurred in load_vmstate.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Kevin Wolf
8a4266144e block: Change bdrv_commit to handle multiple sectors at once
bdrv_commit copies the image to its backing file sector by sector, which
is (surprise!) relatively slow. Let's take a larger buffer and handle more
sectors at once if possible.

With a 1G qcow2 file, this brought the time bdrv_commit takes down from
5:06 min to 1:14 min for me.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03 15:57:22 +02:00
Artyom Tarasenko
5933e8a96a fix last cpu timer initialization
The timer #0 is the system timer, so the timer #num_cpu is the
timer of the last CPU, and it must be initialized in slavio_timer_reset.

Don't mark non-existing timers as running.

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-02 18:49:13 +00:00
Blue Swirl
ad7ee4ad6c Initialize a variable in all cases
Commit d167f9bc06 missed this one:
/src/qemu/ui/vnc-enc-tight.c:1483: warning: 'ret' may be used uninitialized in this function

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31 19:43:37 +00:00
Blue Swirl
aee474ebc6 Fix uint8_t comparison with negative value
Commit 7bccf57383 missed this one:
/src/qemu/ui/vnc-enc-tight.c: In function 'send_sub_rect':
/src/qemu/ui/vnc-enc-tight.c:1527: warning: comparison is always true due to limited range of data type

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31 19:40:17 +00:00
Blue Swirl
3690cec8f8 Fix a warning on OpenSolaris
Add a missing #include statement to avoid a warning:
/src/qemu/net/tap-solaris.c: In function 'tap_open':
/src/qemu/net/tap-solaris.c:189: warning: implicit declaration of function 'error_report'

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31 19:40:13 +00:00
Hervé Poussineau
671b0f368b Correctly identify multiple cpus in SMP systems
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:52 +02:00
Hervé Poussineau
cf7c00d5c6 Remove unused constant
Remove unused constant MIPS_FCR0

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:51 +02:00
Hervé Poussineau
14414da468 jazz led: Fix debug prints
Add a macro to easily enable/disable debug prints
Also fix wrong printf formatters

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:50 +02:00
Edgar E. Iglesias
872a91b49f xilinx-s3adsp: Add support for loading u-boot images.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-31 00:50:17 +02:00
Edgar E. Iglesias
811976dcd3 xilinx-s3adsp: Fix loading of raw binaries.
Set high to a word aligned address beyond loaded image.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-31 00:42:07 +02:00
Mike McCormack
708f2ada7d Remove unused eventfd.h
This header is not present on my system and causes a build
failure, but is also not used in these files, so remove it.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:25:25 +02:00
Amit Shah
8e84865e54 migration: Accept 'cont' only after successful incoming migration
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.

Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.

A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.

Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:14:08 +02:00
Isaku Yamahata
7899f799b7 mips64el: fulong: PCI_DEVFN() clean up.
Use PCI_DEVFN() where appropriate.
The resulted stripped binary remains same
with/without thie patch.

Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:09:49 +02:00
Joel Schopp
dca98169b8 remove pointless if from vl.c
We already set sockets to nonzero in the code above.
So this if statement always evaluates true.  Remove it.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:05:52 +02:00
Joel Schopp
ca1d6ac657 fix variable type in qemu-io.c
The variable len can get a negative return value from cvtnum,
which we check for, but which is impossible with the current
unsigned variable type.  Currently the if(len < 0) check is
pointless.  This patch fixes that.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:05:51 +02:00
Joel Schopp
61bca2942c remove dead code from hw/loader.c
Removing dead code.  Above we already continued when
rom->addr + valuegreaterthan0 < addr so this condition is always false.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:05:51 +02:00
Alex Williamson
69e58af92c savevm: Fix memory leak of compat struct
Forgot to check for and free these.

Found-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 23:00:56 +02:00
Amit Shah
5ab4bb598d virtio-serial: Check if more max_ports specified than we can handle
Currently virtio-serial supports a maximum of 31 ports. Specifying the
'max_ports' parameter to be > 31 on the cmd line causes badness.

Ensure we initialise virtio-serial only if max_ports is within the
supported range.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30 22:59:55 +02:00
Aurelien Jarno
cdc6f54200 Merge branch 'for-anthony' of git://repo.or.cz/qemu/kevin
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
  Fix -snapshot deleting images on disk change
  block: Use error codes from lower levels for error message
  block: default to 0 minimal / optiomal I/O size
  move 'unsafe' to end of caching modes in help
  virtio-blk: Create exit function to unregister savevm
  block migration: propagate return value when bdrv_write() returns < 0
  ide/atapi: add support for GET EVENT STATUS NOTIFICATION
2010-07-30 21:12:24 +02:00
Aurelien Jarno
18e9ea8a3f linux-user: fix build on hosts not using guest base
Commit 68a1c81686 broke qemu on hosts not
using guest base. It uses reserved_va unconditionally in mmap.c. To
avoid to many #ifdef #endif blocks, define RESERVED_VA as either
reserved_va or 0ul, and use it instead of reserved_va, similarly to what
has been done with guest_base/GUEST_BASE.
2010-07-30 21:09:10 +02:00