CpuModelInfo member @props is semantically a mapping from name to
value, and syntactically a JSON object on the wire. This translates
to QDict in C. Since the QAPI schema language lacks the means to
express 'object', we use 'any' instead. This is QObject in C.
Commands taking a CpuModelInfo argument need to check the QObject is a
QDict.
For arm, riscv, and s390x, the code checks right before passing the
QObject to visit_start_struct(). visit_start_struct() then checks
again.
Delete the first check.
The error message for @props that are not an object changes slightly
to the the message we get for this kind of type error in other
contexts. Minor improvement.
Additionally, error messages about members of @props now refer to
'props.prop-name' instead of just 'prop-name'. Another minor
improvement.
Both changes are visible in tests/qtest/arm-cpu-features.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-2-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[Drop #include now superfluous]
-----BEGIN PGP SIGNATURE-----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=Xt/n
-----END PGP SIGNATURE-----
Merge tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu into staging
qga-pull-2024-03-11-2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmXvMF4ACgkQ711egWG6
# hOd7GQ/9H11bXH5U2HZHAyEv68rCuGxHt57yjy9GfrSGAE7kqkLJ0bHwxdgoj09A
# mmaTOakOEhM5tyrkFYsROde3ta0fAwdFQXyhqpWDHG0ZwDDCAlsNsEuDd541KXbg
# qFTue26BM4EJEwTYy94nEEhOHD+2GgEAuPIsUCF6QDhrq+sBqUts1pH3uUM+E3Sg
# 7HSXaF9O/RbgYR6J8FVA53tvNOP4WgOYZ/SZoFwKYzIOAblcaRgJvVbm600OqQDb
# DUZ96s6HUBVBazKx4t24WwPOkgcvYgp7b8QYj2VVfjRU2IHnFumv9A47KuEdJEUl
# meZlo8TsgfL+uSiYWiRvps1Eo1uoS2M4s4FYGbuOeABYviLr3XhJM7VarNyPp7nf
# lupuyeqydXCic5LFbjSg5gkpaIhFYQ9gANYr6JZjPPjX5G8hmgCeB6YsZT98Ygmi
# yG1np2luapvFGsDCPd8kgNpfTkKhOpKghUnTC3UESReV8mjBGhJHRQTd+lMV7YWJ
# reMRxlqrqNq69lDUnlNuSXOqPJX1qHHGkWuV9pdz641tFvw7vigE07qhvsCr8Y7b
# tAg6oDcw+1uuq2t3nHmfkzic6WTxb4lFmSpShsDu2sRA7MqWE3lCefNoS75R+xaI
# FebdrkjkFxdbazyl6oKXwxkOkAR7rFoTvVKKbG79DVMIBDiu4BE=
# =Xt/n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 16:25:02 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu:
qga-win: Add support of Windows Server 2025 in get-osinfo command
qga/commands-win32: Do not set matrix_lookup_t/win_10_0_t arrays size
qga/commands-win32: Declare const qualifier before type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support of Windows Server 2025 in get-osinfo command
Signed-off-by: Dehan Meng <demeng@redhat.com>
Message-ID: <20240222152835.72095-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-4-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
ga_get_win_name() iterates over all elements in the arrays by
checking the 'version' field is non-NULL. Since the arrays are
guarded by a NULL terminating element, we don't need to specify
their size:
static char *ga_get_win_name(...)
{
...
const ga_matrix_lookup_t *table = WIN_VERSION_MATRIX[tbl_idx];
const ga_win_10_0_t *win_10_0_table = ...
...
while (table->version != NULL) {
^^^^^^^^^^^^^^^
while (win_10_0_table->version != NULL) {
^^^^^^^^^^^^^^^
This will simplify maintenance when adding new entries to these
arrays.
Split WIN_VERSION_MATRIX into WIN_CLIENT_VERSION_MATRIX and
WIN_SERVER_VERSION_MATRIX because multidimensional array must
have bounds for all dimensions except the first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-3-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-3-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Most of the code base use the 'const' qualifier *before*
the type being qualified. Use the same style to unify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240222152835.72095-2-philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Link: https://lore.kernel.org/r/20240304134532.28506-2-kkostiuk@redhat.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
BI_CPUTYPE/BI_MMUTYPE/BI_FPUTYPE were statically assigned to the
68040 information.
This patch changes the code to set in bootinfo the information
provided by the command line '-cpu' parameter.
Bug: https://gitlab.com/qemu-project/qemu/-/issues/2091
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240223155742.2790252-1-laurent@vivier.eu>
Add reset support for mcf5208.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240309093459.984565-1-angelo@kernel-space.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The support for "parameter=0" SMP configurations is removed, and QEMU
returns error for those cases.
So add the related test cases to ensure parameters can't accept 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-14-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The smp_props.has_clusters in MachineClass is not a user configured
field, and it indicates if user specifies "clusters" in -smp.
After -smp parsing, other module could aware if the cluster level
is configured by user. This is used when the machine has only 1 cluster
since there's only 1 cluster by default.
Add the check to cover this field.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-13-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports up to 7-levels topology hierarchy:
-drawers/books/sockets/dies/clusters/cores/threads.
Though no machine supports all these 7 levels yet, these 7 levels have
the strict containment relationship and together form the generic CPU
topology representation of QEMU.
Also, note that the maxcpus is calculated by multiplying all 7 levels:
maxcpus = drawers * books * sockets * dies * clusters *
cores * threads.
To cover this code path, it is necessary to test the full topology case
(with all 7 levels). This also helps to avoid introducing new issues by
further expanding the CPU topology in the future.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-12-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since s390 machine supports both "drawers" and "books" in -smp, add the
"drawers" and "books" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-11-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although drawer was introduced to -smp along with book by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-10-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although book was introduced to -smp along with drawer by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-9-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports 2 more new levels: book and drawer.
It is necessary to consider the effects of book and drawer in the test
cases to ensure that the calculations are correct. This is also the
preparation to add new book and drawer test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-8-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The q35 machine is trying to support up to 4096 vCPUs [1], so it's
necessary to bump max_cpus in test-smp-parse to 4096 to cover the
topological needs of future machines.
[1]: https://lore.kernel.org/qemu-devel/20240228143351.3967-1-anisinha@redhat.com/
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-7-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use MAX_CPUS/MIN_CPUS macros in invalid topology case. This gives us the
flexibility to change the maximum and minimum CPU limits.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-6-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Unsupported "parameter=1" SMP configurations is marked as deprecated,
so drop the related test case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-5-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In machine_parse_smp_config(), the number of total CPUs is calculated
by:
drawers * books * sockets * dies * clusters * cores * threads
To avoid missing the future new topology level, use a local variable to
cache the calculation result so that total CPUs are only calculated
once.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308160148.3130837-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind of
configurations is marked deprecated since 9.0. And report warning
message for such case like:
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported clusters parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported books parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported drawers parameter mustn't be specified as 1
Users have to ensure that all the topology members described with -smp
are supported by the target machine.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "parameter=0" SMP configurations have been marked as deprecated
since v6.2.
For these cases, -smp currently returns the warning and adjusts the
zeroed parameters to 1 by default.
Remove the above compatibility logic in v9.0, and return error directly
if any -smp parameter is set as 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240308160148.3130837-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The doc title did not match the actual definition.
Fixes: 2720ceda05 ("docs: expand firmware descriptor to allow flash without NVRAM")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240307-qapi-firmware-json-v2-2-3b29eabb9b9a@linutronix.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Adjust indentation for commit d23055b8db (qapi: Require descriptions
and tagged sections to be indented).
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240307-qapi-firmware-json-v2-1-3b29eabb9b9a@linutronix.de>
[PMD: Reword description using Markus suggestion]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Even if the error is set, the build is not aborted when the ncpus value
is wrong, the return is missing.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6bf1478543 ("hw/intc/grlib_irqmp: add ncpus property")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308152719.591232-1-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The output of info qtree monitor command is very long. Add an option
to print a brief overview omitting all the details.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240307183812.0105D4E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Introduce a new enum type property allowing to set an
IOMMU granule. Values are 4k, 8k, 16k, 64k and host.
This latter indicates the vIOMMU granule will match
the host page size.
A subsequent patch will add such a property to the
virtio-iommu device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227165730.14099-2-eric.auger@redhat.com>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240304224133.267640-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "isapc" machine only provides an ISA bus, not a PCI one,
and doesn't instanciate any i440FX south bridge.
Its machine class defines PCMachineClass::pci_enabled = false,
and pc_init1() only uses the pci_type argument when pci_enabled
is true. Since for this machine the argument is not used,
passing NULL makes more sense.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240301185936.95175-5-philmd@linaro.org>
All callers use host_type=TYPE_I440FX_PCI_HOST_BRIDGE.
Directly use this definition within pc_init1().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-4-philmd@linaro.org>
NotifyVmexitOption_str() is QAPI-generated in
"qapi/qapi-types-run-state.h", which "sysemu/runstate.h"
already includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-3-philmd@linaro.org>
These definitions were removed in commit ea985d235b
("pc_piix: remove pc-i440fx-1.4 up to pc-i440fx-1.7").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-2-philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The sev_inject_launch_secret() passes @errp to error_prepend(), and as
an APIs defined in target/i386/sev.h, it is necessary to protect its
@errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The remote_object_set_fd() passes @errp to error_prepend(), and as a
PropertyInfo.set method, its @errp is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_netdev_connect() passes @errp to error_prepend(), and its @errp
parameter is from xen_device_frontend_changed().
Though its @errp points to @local_err of xen_device_frontend_changed(),
to follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_console_connect() passes @errp to error_prepend() without
ERRP_GUARD().
There're 2 places will call xen_console_connect():
- xen_console_realize(): the @errp is from DeviceClass.realize()'s
parameter.
- xen_console_frontend_changed(): the @errp points its caller's
@local_err.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of xen_console_connect().
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-ID: <20240228163723.1775791-15-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to build this file once for all targets, replace:
TARGET_PAGE_BITS -> qemu_target_page_bits()
TARGET_PAGE_SIZE -> qemu_target_page_size()
TARGET_PAGE_MASK -> -qemu_target_page_size()
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-4-philmd@linaro.org>
We are going to replace TARGET_PAGE_MASK by a
runtime variable. In order to reduce code duplication,
propagate TARGET_PAGE_MASK to get_physmapping() and
xen_phys_offset_to_gaddr().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-3-philmd@linaro.org>
Use TARGET_PAGE_SIZE to calculate TARGET_PAGE_ALIGN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-2-philmd@linaro.org>
xen-hvm.c calls xc_set_hvm_param() from <xenctrl.h>,
so better compile it with Xen CPPFLAGS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-19-philmd@linaro.org>
"hw/xen/xen_pt.h" requires "hw/xen/xen_native.h" which is target
specific. It also declares IGD methods, which are not target
specific.
Target-agnostic code can use IGD methods. To allow that, extract
these methos into a new "hw/xen/xen_igd.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-18-philmd@linaro.org>
Commit eaab4d60d3 ("Introduce Xen PCI Passthrough, qdevice")
introduced both xen_pt.[ch], but only added the license to
xen_pt.c. Use the same license for xen_pt.h.
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-17-philmd@linaro.org>
Instead of the target-specific TARGET_PAGE_BITS definition,
use qemu_target_page_bits() which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-15-philmd@linaro.org>
To avoid a potential global variable shadow in
hw/i386/pc_piix.c::pc_init1(), rename Xen's
"ram_memory" as "xen_memory".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-11-philmd@linaro.org>
Since commit 04b0de0ee8 ("xen: factor out common functions")
xen_hvm_inject_msi() stub is not required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-8-philmd@linaro.org>
Similarly to the restriction in hw/pci/msix.c (see commit
e1e4bf2252 "msix: fix msix_vector_masked"), restrict the
xen_is_pirq_msi() call in msi_is_masked() to Xen.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-7-philmd@linaro.org>
physmem.c doesn't use any declaration from "hw/xen/xen.h",
it only requires "sysemu/xen.h" and "system/xen-mapcache.h".
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20231114143816.71079-5-philmd@linaro.org>
