When bdrv_pad_request() fails in bdrv_co_preadv_part(), bs->in_flight
has been increased, but is never decreased again. This leads to a hang
when trying to drain the block node.
This bug was observed with Windows guests which issue a request that
fully uses IOV_MAX during installation, so that when padding is
necessary (O_DIRECT with a 4k sector size block device on the host),
adding another entry causes failure.
Call bdrv_dec_in_flight() to fix this. There is a larger problem to
solve here because this request shouldn't even fail, but Windows doesn't
seem to care and with this minimal fix the installation succeeds. So
given that we're already in freeze, let's take this minimal fix for 6.1.
Fixes: 98ca45494f
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1972079
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210727154923.91067-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Message-Id: <20210709160459.4962-3-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.
Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
* Only raise SIGILL if DXC == 0
* If DXC matches a non-simulated IEEE exception, raise SIGFPE with
correct si_code
* Raise SIGFPE with si_code == 0 for everything else
When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.
Fix by advancing psw.addr for these signals.
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libstdc++ is required for the qga-vss.dll that provides fsfreeze
functionality. Currently it is not provided by the MSI installer,
resulting in fsfreeze being disabled in guest environments where it has
not been installed by other means.
In the future this would be better handled via gcc-cpp ComponentGroup
provided by msitools, but that would be better handled with a general
rework of DLL dependency handling in the installer build. Keep it
simple for now to fix this regression.
Tested with Fedora 34 mingw build environment.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kostiantyn Kostiuk <konstantin@daynix.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The g_regex_match function creates match_info even if it
returns FALSE. So we should always call g_match_info_free.
A better solution is using g_autoptr for match_info variable.
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
In ga_get_win_product_name() a handle to Registry key was open but not
closed.
In this patch the handle is closed as part of the free routine.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1929144
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
On the current error path of build_guest_fsinfo(), a non existent handle
is passed to CloseHandle().
This patch adds initialization of hLocalDiskHandle to
INVALID_HANDLE_VALUE, and checks for handle validity before the handle
is closed.
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Basil Salman <basil@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
* Add documentation of Arm 'mainstone', 'kzm', 'imx25-pdk' boards
* MAINTAINERS: Don't list Andrzej Zaborowski for various components
* docs: Remove stale TODO comments about license and version
* docs: Move licence/copyright from HTML output to rST comments
* docs: Format literal text correctly
* hw/arm/boot: Report error if there is no fw_cfg device in the machine
* docs: rSTify barrier.txt and bootindex.txt
-----BEGIN PGP SIGNATURE-----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=dwM4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210802' into staging
target-arm queue:
* Add documentation of Arm 'mainstone', 'kzm', 'imx25-pdk' boards
* MAINTAINERS: Don't list Andrzej Zaborowski for various components
* docs: Remove stale TODO comments about license and version
* docs: Move licence/copyright from HTML output to rST comments
* docs: Format literal text correctly
* hw/arm/boot: Report error if there is no fw_cfg device in the machine
* docs: rSTify barrier.txt and bootindex.txt
# gpg: Signature made Mon 02 Aug 2021 12:57:31 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210802: (21 commits)
docs: Move user-facing barrier docs into system manual
ui/input-barrier: Move TODOs from barrier.txt to a comment
docs: Move the protocol part of barrier.txt into interop
docs: Move bootindex.txt into system section and rstify
hw/arm/boot: Report error if there is no fw_cfg device in the machine
docs/tools/virtiofsd.rst: Delete stray backtick
docs/about/removed-features: Fix markup error
docs: Format literals correctly
docs/system/arm/cpu-features.rst: Format literals correctly
docs/system/s390x/protvirt.rst: Format literals correctly
docs/devel: Format literals correctly
docs/devel/migration.rst: Format literals correctly
docs/devel/ebpf_rss.rst: Format literals correctly
docs/devel/build-system.rst: Correct typo in example code
docs/devel/build-system.rst: Format literals correctly
docs: Move licence/copyright from HTML output to rST comments
docs: Remove stale TODO comments about license and version
MAINTAINERS: Don't list Andrzej Zaborowski for various components
docs: Add documentation of Arm 'imx25-pdk' board
docs: Add documentation of Arm 'kzm' board
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The remaining text in docs/barrier.txt is user-facing description
of what the device is and how to use it. Move this into the
system manual and rstify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210727204112.12579-4-peter.maydell@linaro.org
docs/barrier.txt has a couple of TODO notes about things to be
implemented in this device; move them into a comment in the
source code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210727204112.12579-3-peter.maydell@linaro.org
Most of docs/barrier.txt is describing the protocol implemented
by the input-barrier device. Move this into the interop
section of the manual, and rstify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20210727204112.12579-2-peter.maydell@linaro.org
Move bootindex.txt into the system section of the manual and turn it
into rST format. To make the document make more sense in the context
of the system manual, expand the title and introductory paragraphs to
give more context.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210727194955.7764-1-peter.maydell@linaro.org
If the user provides both a BIOS/firmware image and also a guest
kernel filename, arm_setup_firmware_boot() will pass the
kernel image to the firmware via the fw_cfg device. However we
weren't checking whether there really was a fw_cfg device present,
and if there wasn't we would crash.
This crash can be provoked with a command line such as
qemu-system-aarch64 -M raspi3 -kernel /dev/null -bios /dev/null -display none
It is currently only possible on the raspi3 machine, because unless
the machine sets info->firmware_loaded we won't call
arm_setup_firmware_boot(), and the only machines which set that are:
* virt (has a fw-cfg device)
* sbsa-ref (checks itself for kernel_filename && firmware_loaded)
* raspi3 (crashes)
But this is an unfortunate beartrap to leave for future machine
model implementors, so we should handle this situation in boot.c.
Check in arm_setup_firmware_boot() whether the fw-cfg device exists
before trying to load files into it, and if it doesn't exist then
exit with a hopefully helpful error message.
Because we now handle this check in a machine-agnostic way, we
can remove the check from sbsa-ref.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210726163351.32086-1-peter.maydell@linaro.org
The documentation of the posix_acl option has a stray backtick
at the end of the text (which is rendered literally into the HTML).
Delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210726142338.31872-11-peter.maydell@linaro.org
The section describing the removed feature "-usbdevice ccid" had a
typo so the markup started with single backtick and ended with double
backtick; fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-10-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
This commit fixes various places in the manual which were
using single backticks when double backticks (for literal text)
were intended, and covers those files where only one or two
instances of these errors were made.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
cpu-features.rst consistently uses single backticks when double backticks
are required; correct it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-8-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
protvirt.rst consistently uses single backticks when double backticks
are required; correct it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20210726142338.31872-7-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
Fix various places in the devel section of the manual which were
using single backticks when double backticks (for literal text)
were intended.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-6-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
Mostly migration.rst gets this right, but some places incorrectly use
single backticks where double backticks were intended; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210726142338.31872-5-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
ebpf_rss.rst gets this wrong in a few places; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-4-peter.maydell@linaro.org
One of the example meson.build fragments incorrectly quotes some
symbols as 'CONFIG_FOO`; the correct syntax here is 'CONFIG_FOO'.
(This isn't a rST formatting mistake because the example is displayed
literally; it's just the wrong kind of quote.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-3-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
build-system.rst seems to have been written under the mistaken
assumption that single-backticks mark up literal text (function
names, etc) which should be rendered in a fixed-width font.
The rST markup for this is ``double backticks``.
Update all the markup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210726142338.31872-2-peter.maydell@linaro.org
Our built HTML documentation now has a standard footer which
gives the license for QEMU (and its documentation as a whole).
In almost all pages, we either don't bother to state the
copyright/license for the individual rST sources, or we put
it in an rST comment. There are just three pages which render
copyright or license information into the user-visible HTML.
Quoting a specific (different) license for an individual HTML
page within the manual is confusing. Downgrade the license
and copyright info to a comment within the rST source, bringing
these pages in line with the rest of our documents.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210722192016.24915-3-peter.maydell@linaro.org
Since commits 13f934e79f and 3a50c8f306, our HTML docs include a
footer to all pages stating the license and version. We can
therefore delete the TODO comments suggesting we should do that from
our .rst files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210722192016.24915-2-peter.maydell@linaro.org
Andrzej Zaborowski is listed as an "Odd Fixes" maintainer for the
nSeries, Palm and PXA2XX boards, as well as the "Maintained" status
Arm 32-bit TCG backend.
Andrzej's last email to qemu-devel was back in 2017, and the email
before that was all the way back in 2013. We don't really need to
fill his email up with CCs on QEMU patches any more...
Remove Andrzej from the various boards sections (leaving them still
Odd Fixes with me as the backup patch reviewer). Add Richard
Henderson as the maintainer for the Arm TCG backend, since removing
Andrzej would otherwise leave that section with no M: line at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722180951.29802-1-peter.maydell@linaro.org
Add brief documentation of the Arm 'imx25-pdk' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-4-peter.maydell@linaro.org
Add brief documentation of the Arm 'kzm' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-3-peter.maydell@linaro.org
Add brief documentation of the Arm 'mainstone' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-2-peter.maydell@linaro.org
Version: GnuPG v1
iQEcBAABAgAGBQJhB3M3AAoJEO8Ells5jWIRFB0H/1U2ZTqIrIz41kU4twRdcj8z
npX1cJvXtFRymh2Sp3flh4UWg6RtGn0rkKBbGeQjlvLLFHXm6HyTTfO0ZJ+5zyd3
MRzkU8HU/GnDJ1eiYC+FwJr8cKcapdcANMd2YE2j29kifX4lO2NHfkIPVXjpR732
qEDVm6kiM/XPid4fmpfLz1Lemibn7dwmIQuYtmuhxBQ+8H1uxhLtx1nz5pJcOQcs
JOiNgeyJzH7vosI2zOB2JGtXr39JOJJ2IQjwH687sluOXc1DmkY9DsiN0gNSn+Fh
sETodE56Zd3aTumQ+5+IImG5N4rpzgyjA5FRFLmS0dmtiMrulNLaE5w3zzlbgXI=
=xI/1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 02 Aug 2021 05:23:19 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
hw/net: e1000e: Don't zero out the VLAN tag in the legacy RX descriptor
hw/net: e1000e: Correct the initial value of VET register
hw/net: e1000: Correct the initial value of VET register
hw/net/can: sja1000 fix buff2frame_bas and buff2frame_pel when dlc is out of std CAN 8 bytes
hw/net/vmxnet3: Do not abort QEMU if guest specified bad queue numbers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the legacy RX descriptor mode, VLAN tag was saved to d->special
by e1000e_build_rx_metadata() in e1000e_write_lgcy_rx_descr(), but
it was then zeroed out again at the end of the call, which is wrong.
Fixes: c89d416a2b ("e1000e: Don't zero out buffer address in rx descriptor")
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The initial value of VLAN Ether Type (VET) register is 0x8100, as per
the manual and real hardware.
While Linux e1000e driver always writes VET register to 0x8100, it is
not always the case for everyone. Drivers relying on the reset value
of VET won't be able to transmit and receive VLAN frames in QEMU.
Unlike e1000 in QEMU, e1000e uses a field 'vet' in "struct E1000Core"
to cache the value of VET register, but the cache only gets updated
when VET register is written. To always get a consistent VET value
no matter VET is written or remains its reset value, drop the 'vet'
field and use 'core->mac[VET]' directly.
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The initial value of VLAN Ether Type (VET) register is 0x8100, as per
the manual and real hardware.
While Linux e1000 driver always writes VET register to 0x8100, it is
not always the case for everyone. Drivers relying on the reset value
of VET won't be able to transmit and receive VLAN frames in QEMU.
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Problem reported by openEuler fuzz-sig group.
The buff2frame_bas function (hw\net\can\can_sja1000.c)
infoleak(qemu5.x~qemu6.x) or stack-overflow(qemu 4.x).
Reported-by: Qiang Ning <ningqiang1@huawei.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU should never terminate unexpectedly just because the guest is
doing something wrong like specifying wrong queue numbers. Let's
simply refuse to set the device active in this case.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890160
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Raised exceptions don't return, so mark the helper with noreturn.
Fixes: 032c76bc6f ("nios2: Add architecture emulation support")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210729101315.2318714-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This crept in as either a cut-and-paste error, or rebase error.
Fixes: cfec388518 ("atomic_template: add inline trace/plugin helpers")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210729004647.282017-24-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity seems to have issues figuring out the properties of g_malloc0
and other non *_n functions. While this was "fixed" by removing the
custom second argument to __coverity_mark_as_afm_allocated__, inline
the code from the array-based allocation functions to avoid future
issues.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_malloc/g_malloc0/g_realloc only return NULL if the size is 0; we do not need
to cover that in the model, and so far have expected __coverity_alloc__
to model a non-NULL return value. But that apparently does not work
anymore, so add some extra conditionals that invoke __coverity_panic__
for NULL pointers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
