Remove some unused headers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the following:
ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('
(the last two still have some occurrences in macros which I left
behind because it might impact readability)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these:
WARNING: Block comments use a leading /* on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even
tough they don't have the TTBCR register.
See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R
AArch32 architecture profile Version:A.c section C1.2.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v8R PMSAv8 has a two-stage MPU translation process, but, unlike
VMSAv8, the stage 2 attributes are in the same format as the stage 1
attributes (8-bit MAIR format). Rather than converting the MAIR
format to the format used for VMSA stage 2 (bits [5:2] of a VMSA
stage 2 descriptor) and then converting back to do the attribute
combination, allow combined_attrs_nofwb() to accept s2 attributes
that are already in the MAIR format.
We move the assert() to combined_attrs_fwb(), because that function
really does require a VMSA stage 2 attribute format. (We will never
get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.)
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
Convert the Arm CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20221124115023.2437291-3-peter.maydell@linaro.org
When building with --disable-tcg on Darwin we get:
target/arm/cpu.c:725:16: error: incomplete definition of type 'struct TCGCPUOps'
cc->tcg_ops->do_interrupt(cs);
~~~~~~~~~~~^
Commit 083afd18a9 ("target/arm: Restrict cpu_exec_interrupt()
handler to sysemu") limited this block to system emulation,
but neglected to also limit it to TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221209110823.59495-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the ID registers for TCG's '-cpu max' to report the
FEAT_EVT Enhanced Virtualization Traps support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TID4 trap allows trapping of the cache ID
registers CCSIDR_EL1, CCSIDR2_EL1, CLIDR_EL1 and CSSELR_EL1 (and
their AArch32 equivalents). This is a subset of the registers
trapped by HCR_EL2.TID2, which includes all of these and also the
CTR_EL0 register.
Our implementation already uses a separate access function for
CTR_EL0 (ctr_el0_access()), so all of the registers currently using
access_aa64_tid2() should also be checking TID4. Make that function
check both TID2 and TID4, and rename it appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TICAB bit allows trapping of the ICIALLUIS
and IC IALLUIS cache maintenance instructions.
The HCR_EL2.TOCU bit traps all the other cache maintenance
instructions that operate to the point of unification:
AArch64 IC IVAU, IC IALLU, DC CVAU
AArch32 ICIMVAU, ICIALLU, DCCMVAU
The two trap bits between them cover all of the cache maintenance
instructions which must also check the HCR_TPU flag. Turn the old
aa64_cacheop_pou_access() function into a helper function which takes
the set of HCR_EL2 flags to check as an argument, and call it from
new access_ticab() and access_tocu() functions as appropriate for
each cache op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBOS bit allows trapping on EL1
use of TLB maintenance instructions that operate on the
outer shareable domain:
TLBI VMALLE1OS, TLBI VAE1OS, TLBI ASIDE1OS,TLBI VAAE1OS,
TLBI VALE1OS, TLBI VAALE1OS, TLBI RVAE1OS, TLBI RVAAE1OS,
TLBI RVALE1OS, and TLBI RVAALE1OS.
(There are no AArch32 outer-shareable TLB maintenance ops.)
Implement the trapping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBIS bit allows trapping on EL1 use of
TLB maintenance instructions that operate on the inner shareable
domain:
AArch64:
TLBI VMALLE1IS, TLBI VAE1IS, TLBI ASIDE1IS, TLBI VAAE1IS,
TLBI VALE1IS, TLBI VAALE1IS, TLBI RVAE1IS, TLBI RVAAE1IS,
TLBI RVALE1IS, and TLBI RVAALE1IS.
AArch32:
TLBIALLIS, TLBIMVAIS, TLBIASIDIS, TLBIMVAAIS, TLBIMVALIS,
and TLBIMVAALIS.
Add the trapping support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_EVT adds five new bits to the HCR_EL2 register: TTLBIS, TTLBOS,
TICAB, TOCU and TID4. These allow the guest to enable trapping of
various EL1 instructions to EL2. In this commit, add the necessary
code to allow the guest to set these bits if the feature is present;
because the bit is always zero when the feature isn't present we
won't need to use explicit feature checks in the "trap on condition"
tests in the following commits.
Note that although full implementation of the feature (mandatory from
Armv8.5 onward) requires all five trap bits, the ID registers permit
a value indicating that only TICAB, TOCU and TID4 are implemented,
which might be the case for CPUs between Armv8.2 and Armv8.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular
it supports the Privileged Access Never (PAN) feature. Add
a model of this CPU, so you can use a CPU type on the virt
board that models a specific real hardware CPU, rather than
having to use the QEMU-specific "max" CPU type.
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Message-id: 20221121150819.2782817-1-tkutergin@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
With LPA2, the effective output address size is at most 48 bits when
TCR.DS == 0. This case is currently unhandled in the page table walker,
where we happily assume LVA/64k granule when outputsize > 48 and
param.ds == 0, resulting in the wrong conversion to be used from a
page table descriptor to a physical address.
if (outputsize > 48) {
if (param.ds) {
descaddr |= extract64(descriptor, 8, 2) << 50;
} else {
descaddr |= extract64(descriptor, 12, 4) << 48;
}
So cap the outputsize to 48 when TCR.DS is cleared, as per the
architecture.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221116170316.259695-1-ardb@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reversed the sense of non-secure in get_phys_addr_lpae,
and failed to initialize attrs.secure for ARMMMUIdx_Phys_S.
Fixes: 48da29e4 ("target/arm: Add ptw_idx to S1Translate")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1293
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check HCR_E2H and HCR_TGE to select the right MMU index for
the correct translation regime.
To check for EL2&0 translation regime:
- For S1E0*, S1E1* and S12E* ops, check both HCR_E2H and HCR_TGE
- For S1E2* ops, check only HCR_E2H
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221101064250.12444-1-ake@igel.co.jp
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With odd_ofs set, we weren't copying enough data.
Fixes: 09eb6d7025 ("target/arm: Move sve zip high_ofs into simd_data")
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221031054144.3574-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the PAN support we theoretically wanted
to support it for both AArch32 and AArch64, but in practice
several bugs made it essentially unusable with an AArch32
guest. Fix all those problems:
- Use CPSR.PAN to check for PAN state in aarch32 mode
- throw permission fault during address translation when PAN is
enabled and kernel tries to access user acessible page
- ignore SCTLR_XP bit for armv7 and armv8 (conflicts with SCTLR_SPAN).
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221027112619.2205229-1-tkutergin@gmail.com
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HCR_EL2.TTLB bit is supposed to trap all EL1 execution of TLB
maintenance instructions. However we have added new TLB insns for
FEAT_TLBIOS and FEAT_TLBIRANGE, and forgot to set their accessfn to
access_ttlb. Add the missing accessfns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had only been reporting the stage2 page size. This causes
problems if stage1 is using a larger page size (16k, 2M, etc),
but stage2 is using a smaller page size, because cputlb does
not set large_page_{addr,mask} properly.
Fix by using the max of the two page sizes.
Reported-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the dirty bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the access flag.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-13-richard.henderson@linaro.org
[PMM: Fix accidental PROT_WRITE to PAGE_WRITE; add missing
main-loop.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace some gotos with some nested if statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both GP and DBM are in the upper attribute block.
Extend the computation of attrs to include them,
then simplify the setting of guarded.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221024051851.3074715-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always overriding fi->type was incorrect, as we would not properly
propagate the fault type from S1_ptw_translate, or arm_ldq_ptw.
Simplify things by providing a new label for a translation fault.
For other faults, store into fi directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The unconditional loop was used both to iterate over levels
and to control parsing of attributes. Use an explicit goto
in both cases.
While this appears less clean for iterating over levels, we
will need to jump back into the middle of this loop for
atomic updates, which is even uglier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fault type is to be used with FEAT_HAFDBS when
the guest enables hw updates, but places the tables
in memory where atomic updates are unsupported.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Separate S1 translation from the actual lookup.
Will enable lpae hardware updates.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MMFR1 field may indicate support for hardware update of
access flag alone, or access flag and dirty bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the computation of the mmu_idx for the ptw up to
get_phys_addr_with_struct and get_phys_addr_twostage.
This removes the duplicate check for stage2 disabled
from the middle of the walk, performing it only once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reduce the amount of typing required for this check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
