When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a modifier key is pressed or released, the USB HID keyboard still
answers NAK, unless another key is also pressed or released.
The patch fixes that by calling usb_hid_changed() when a modifier key
is pressed or released.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The new fields that got added as part of not copying over the guest
buffer to the host need to be saved/restored across migration. Do that
and bump up the version number.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This commit lets apps signal an incomplete write. When that happens,
stop sending out any more data to the app and wait for it to unthrottle
the port.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The have_data() API to hand off guest data to apps using virtio-serial
so far assumed all the data was consumed. Relax this assumption.
Future commits will allow for incomplete writes.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
When the guest writes something to a host, we copied over the entire
buffer first into the host and then processed it. Do away with that, it
could result in a malicious guest causing a DoS on the host.
Reported-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Instead of combining flush logic into the discard case and not discard
case, have one function doing discard case. This will help later when
adding flow control logic to the do_flush_queued_data() function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Patch a6a7005d14 generated
broken device paths. We snprintf with a length shorter
than the output, so the last character is discarded and replaced
by the null byte. Fix it up by snprintf to a buffer
which is larger by 1 byte and then memcpy the data (without
the null byte) to where we need it.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The initialisation for generic ports and console ports is similar.
Factor out the parts that are the same in a different function that can
be called from each of the initfns.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
When reading cp0_count from a timer with a late trigger that should
already have expired, expire it and raise the timer irq.
This makes it possible for guest code (e.g, Linux) that first read
cp0_count, then compare it with cp0_compare and check for raised
timer interrupt lines to run reliably.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reorganize for future patches, no functional change.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Linux kernel started to use the SM501 2D engine for the console, and
especially the copyrect operation.
Implement this operation so that recent kernels can be used with QEMU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Expose no_hotplug attribute via I/O port, so ACPI BIOS can indicate
removability status to guest OS.
An updated seabios is required to make use of this feature (seabios.git
commit ID 3c241edf3d7ef29c21).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The USB keyboard emulation's translation table in hw/usb-hid.c doesn't
match the codes actually sent for the Logo (a.k.a. "Windows") or Menu
keys. This results in the guest OS not being able to receive these keys
at all when the USB keyboard emulation is being used.
In particular, both the keymap in /usr/share/kvm/keymaps/modifiers and
the evdev table in x_keymap.c map these keys to 0xdb, 0xdc, and 0xdd,
while usb_hid_usage_keys[] seems to be expecting them to be mapped to
0x7d, 0x7e, and 0x7f.
The attached patch seems to fix the problem, at least in my (limited)
testing.
http://bugs.debian.org/578846http://bugs.debian.org/600593 (cloned from the above against different pkg)
https://bugs.launchpad.net/qemu/+bug/584139
Signed-Off-By: Brad Jorsch <anomie@users.sourceforge.net>
Signed-Off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
lsi_ram_read*() and lsi_ram_write*() are not consistent, one uses
leXX_to_cpu() the other uses nothing. As the comment above the RAM
declaration says: "Script ram is stored as 32-bit words in host
byteorder.", remove the leXX_to_cpu() calls.
This fixes the boot of an ARM versatile machine on MIPS and PowerPC
hosts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Board id can't be written with stl_phys() as it's read-only part of
memory. Use stl_p() on the memory buffer instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix a buffer overflow, reported by cppcheck:
[/src/qemu/hw/ppc405_uc.c:72]: (error) Buffer access out-of-bounds: bd.bi_s_version
The use of field bi_s_version seems to be a typo, it should be
bi_r_version.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a buffer overflow, reported by cppcheck:
[/src/qemu/hw/lan9118.c:849]: (error) Buffer access out-of-bounds: s.eeprom
All eeprom handling code assumes that the size of eeprom is 128,
except lan9118_eeprom_cmd. Fix this by restricting the address passed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The current default of 16 buffers for the control vq is too small. We
can get more entries in there, for example when asking the guest to add
max. allowed ports.
Note: a more robust solution would involve some kind of event queueing
in host to guarantee no event loss. Added a TODO to look into
this later.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch rewrites the firmware path code to use the physical port
location tracking just added to the qemu usb core. It also fixes the
port numbering to start with "1" in the firmware path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to explictily set the physical port where you want to
plug the usb device. Example:
-device usb-tablet,bus=usb.0,port=2
With explicit port addressing qemu can and will not automagically add
USB Hubs. This means that:
(a) You can plug two devices of your choice into the two uhci
root ports.
(b) If you want plug in more that two devices you have to care
about adding a hub yourself.
Plugging a hub works this way:
-device usb-hub,bus=usb.0,port=1
Use this to add a device to the hub:
-device usb-tablet,bus=usb.0,port=1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a path string to USBPort. Add usb_port_location() function to set
the physical location of the usb port. Update all drivers implementing
usb ports to call it. Update the monitor commands to print it. Wind it
up in qdev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The scsi layer may return us more data than the guests wants to have.
Handle this by just ignoring the extra bytes and calling the
{read,write}_data callback to finish the request.
Seen happening in real life with some extended inquiry command.
With this patch applied the linux kernel stops reseting the device
once at boot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change usb_msd_send_status() to take a pointer to the status packet
instead of writing the status to s->usb_buf which might not point
to the correct location.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add high speed support to the usb mass storage device. With this patch
applied the linux kernel recognises the usb storage device as highspeed
capable device and suggests to connect it to a highspeed port instead of
the uhci. Tested with both uhci and (not-yet submitted) ehci.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for device_qualifier and other_speed_config descriptors.
These are used to query the "other speed" configuration of usb 2.0
devices, i.e. in high-speed mode they return the full-speed
configuration and visa versa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb_desc_attach() which sets up the device according to the speed
the usb port is able to handle. This function can be hooked into the
handle_attach callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add handle_attach() callback to USBDeviceInfo which is called by the
generic package handler when the device is attached to the usb bus
(i.e. plugged into a port).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It would be nice to have some way to signal our hid devices support
remote wakeup. There is a descriptor bit for that of course. Problem
with using is one is that older qemu versions used to set the bit even
though they did *not* support remote wakeup. Bummer.
This patch changes the serial number of our hid devices from "1" to "42"
to signal "it is safe to enable remote wakeup". The serial number was
choosen because it isn't used for anything and it is available in sysfs
so it is easy to match it using udev rules like this:
ACTION=="add", SUBSYSTEM=="usb", \
ATTR{product}=="QEMU USB Tablet", ATTR{serial}=="42", \
RUN+="usb_enable_autosuspend %p"
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes the usb hub handle remote wakeup requests from devices
properly by updating the port status register and forwarding the wakeup
to the upstream port.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add wakeup callback to port ops for remote wakeup handling.
Also add a usb_wakeup() function for devices which want
trigger a remote wakeup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add separate detach callback to USBPortOps, split
uhci/ohci/musb/usbhub attach functions into two.
Move common code to the usb_attach() function, only
the hardware-specific bits remain in the attach/detach
callbacks.
Keep track of the port it is attached to for each usb device.
[ v3: fix tyops in usb-musb.c ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Don't return status from start/stop functions where it's ignored
- report errors to make debugging easier
- assert on unexpected failures
- don't disable notifiers on error so that we'll
retry when guest driver restarts
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch the usb hub driver over to the
new descriptor infrastructure.
It also removes the nr_ports variable and MAX_PORTS define and
introduces a NUM_PORTS define instead. The numver of ports was
(and still is) fixed at 8 anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch the usb serial drivers (serial, braille) over to the
new descriptor infrastructure.
Note that this removes the freely configurable vendor and product id
properties. I think the only reason this was configurable is that the
only difference between the serial and the braille device is the
vendor+product id. Of course the serial and braille devices keep their
different IDs, but they can't be overritten from the command line any
more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds hw/usb-desc.[ch] files. They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.
The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.
The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Virtqueue notify is currently handled synchronously in userspace virtio. This
prevents the vcpu from executing guest code while hardware emulation code
handles the notify.
On systems that support KVM, the ioeventfd mechanism can be used to make
virtqueue notify a lightweight exit by deferring hardware emulation to the
iothread and allowing the VM to continue execution. This model is similar to
how vhost receives virtqueue notifies.
The result of this change is improved performance for userspace virtio devices.
Virtio-blk throughput increases especially for multithreaded scenarios and
virtio-net transmit throughput increases substantially.
Some virtio devices are known to have guest drivers which expect a notify to be
processed synchronously and spin waiting for completion.
For virtio-net, this also seems to interact with the guest stack in strange
ways so that TCP throughput for small message sizes (~200bytes)
is harmed. Only enable ioeventfd for virtio-blk for now.
Care must be taken not to interfere with vhost-net, which uses host
notifiers. If the set_host_notifier() API is used by a device
virtio-pci will disable virtio-ioeventfd and let the device deal with
host notifiers as it wishes.
Finally, there used to be a limit of 6 KVM io bus devices inside the
kernel. On such a kernel, don't use ioeventfd for virtqueue host
notification since the limit is reached too easily. This ensures that
existing vhost-net setups (which always use ioeventfd) have ioeventfds
available so they can continue to work.
After migration and on VM change state (running/paused) virtio-ioeventfd
will enable/disable itself.
* VIRTIO_CONFIG_S_DRIVER_OK -> enable virtio-ioeventfd
* !VIRTIO_CONFIG_S_DRIVER_OK -> disable virtio-ioeventfd
* virtio_pci_set_host_notifier() -> disable virtio-ioeventfd
* vm_change_state(running=0) -> disable virtio-ioeventfd
* vm_change_state(running=1) -> enable virtio-ioeventfd
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move tracking vmstate change from virtio-net to virtio.c
as it is going to be used by virito-blk and virtio-pci
for the ioeventfd support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VirtIOPCIProxy bugs field is currently used to enable workarounds
for older guests. Rename it to flags so that other per-device behavior
can be tracked.
A later patch uses the flags field to remember whether ioeventfd should
be used for virtqueue host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tags all vga cards as not hotpluggable. The qemu
standard vga will never ever be hotpluggable. For cirrus + vmware
it might be possible to get that work some day. Todays we can't
handle that for a number of reasons though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tags all pci devices which belong to the piix3/4 chipsets as
not hotpluggable (Host bridge, ISA bridge, IDE controller, ACPI bridge).
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a field to PCIDeviceInfo to tag devices as being
not hotpluggable. Any attempt to plug-in or -out such a device
will throw an error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some Linux kernels seems to implement ITLB/UTLB flushing through by
writing all TLB entries through the memory mapped interface instead
of writing one to MMUCR.TI.
Implement memory mapped ITLB write interface so that such kernels can
boot. This fixes https://bugs.launchpad.net/bugs/700774 .
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 92d675d1c1 triggered uninitialized
variables warning with GCC 4.6. Fix them by adding zero initializers.
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
956a3e6bb7 introduced a bug concerning
reset bit for port 92.
Since the keyboard output port and port 92 are not compatible anyway,
let's separate them.
Reported-by: Peter Lieven <pl@dlh.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
--
v2: added reset handler and VMState
rtl8139 includes a cpu_register_io_memory acquired value in it's
migration data. This is not only unecessary, but we should treat
these values as unique to the VM instances since the value depends
on call order. In most cases, this miraculously still works.
However, if devices are added or removed from the system, it may
represent an ordering change, which could cause the target rtl8139
device to make use of another device's cpu_register_io_memory value.
If we detect that a hot-add/remove has occured, include a subsection
to restrict migrations only to driver versions known to include this
fix.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create a trivial interface to track whether the machine has been
modified since boot. Adding or removing devices will trigger this
to return true. An example usage scenario for such an interface is
the rtl8139 driver which includes a cpu_register_io_memory() value
in it's migration stream. For the majority of migrations, where
no hotplug has occured in the machine, this works correctly. Once
the machine is modified, we can use this interface to detect that
and include a subsection for the device to prevent migrations to
rtl8139 versions with this bug.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d85d0d3883 introduces a regression
with Windows ME that leads to a division by 0 and a crash.
It uses the color expansion rop with the source pitch set to 0. This is
something allowed, as the manual explicitely says "When the source of
color-expand data is display memory, the source pitch is ignored.".
This patch fixes this regression by computing sx, sy and others
variables only if they are going to be used later, that is for a plain
copy ROP. It basically consists in moving code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On big endian hosts, the curses interface is unusable: the emulated
graphic card only displays garbage, while the monitor interface displays
nothing (or rather only spaces).
The curses interface is waiting for data in native endianness, so
console_write_ch() should not do any conversion. The conversion should
be done when reading the video buffer in hw/vga.c. I supposed this
buffer is in little endian mode, though it's not impossible that the
data is actually in guest endianness. I currently have no big endian
guest to way (they all switch to graphic mode immediately).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The device path used for migration is currently broken for
for all devices behind a nested bridge.
Replace this by a hierarchical list of slot/function numbers, walking
the path from root down to device. Add :00 after the domain number
so that if there are no nested bridges, this is compatible
with what we have now.
Note: as pointed out by Gleb, using openfirmware paths
might be cleaner, doing this would break compatibility though,
and the IDs used are not guest or user visible at all,
so breaking the compatibility is probably not worth it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The s390 target doesn't compile out of the box anymore. This patch fixes all
the obvious glitches that got introduced in the last few weeks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch introduce a helper function to get PCIDevice from qdev id.
This function will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch exports qdev_find_recursive() for later use.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support flr: trigger device reset on flr config write.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The change set of b1aeb92666 in pci branch
was mismerged. The compatibility should be kept for 0.13, not for 0.14.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every system should have some sort of main system bus,
so sysbus_get_default should always return a valid bus.
Without this patch, at least mipssim and malta no longer
start but raise a null pointer access exception (caused by
commit ec990eb622).
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Also trace the extra registers, and update the comments with new
info from Artyom Tarasenko.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
softfloat.h's int64 type has least-width semantics.
Since we're assigning an int64_t, use plain int64_t.
v4:
* Summary change.
v3:
* Split off.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil reported the regression caused by
ec990eb622 as follows
> The second regression also occurs with MIPS malta.
> Networking no longer works with the default pcnet nic.
>
> This is caused because the reset function for pcnet is no
> longer called during system boot. The result in an invalid
> mac address (all zero) and a non-working nic.
>
> For this second regression I still have no simple solution.
> Of course mips_malta.c should be converted to qdev which
> would fix both problems (but only for malta system emulation).
The issue is, it is assumed that all qbuses, qdeves are under
main_system_bus. But there are qbuses whose parent is NULL. So it
is necessary to trigger reset for those qbuses.
(On the other hand, if NULL is passed to qdev_create(), its parent bus
is main_system_bus.)
Ideally those buses should be moved under bus controller
device which is qdev. But it's not done yet.
So register qbus reset handler for qbus whose parent is NULL.
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every system should have some sort of main system bus,
so sysbus_get_default should always return a valid bus.
Without this patch, at least mipssim and malta no longer
start but raise a null pointer access exception (caused by
commit ec990eb622).
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using bus numbers in migration is clearly wrong as
they are guest assigned. Not really sure what the
right thing to do is, for now stick 0 in there so things
keep working for non-nested setups, add a TODO.
We also probably have to mark nested bridges as non-migrateable
until this is fixed?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Avoid these warnings with GCC 4.6.0:
/src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port':
/src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable]
/src/qemu/hw/ide/ahci.c: In function 'handle_cmd':
/src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable]
In the tfd variable case, fix the logic also.
CC: Alexander Graf <agraf@suse.de>
CC: Kevin Wolf <kwolf@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
CC: Alexander Graf <agraf@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ledma has 0x20 bytes of registers according to OBP, and at least Solaris9
reads the 5th register which is beyond what we've mapped. So let's setup
a flag (inspired by a previous patch from Blue Swirl) to identify ledma
from espdma, and map another 16 bytes of registers which return 0.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Support discards via the WRITE SAME command with the unmap bit set, and
tell the initiator about the support for it via the block limit and the
new thin provisioning EVPD pages. Also fix the comment which incorrectly
describedthe block limits EVPD page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We register the vm change state handler in a PCI BAR map() function.
This function can be called multiple times throughout the lifetime of a
PCI IDE device. This results in duplicate vm change state handlers
being register, none of which are ever unregistered.
Instead, register the vm change state handler in the device's init
function once and for all.
piix tested, cmd646 and via not tested.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ATAPI also can do ncq, so let's expose the capability.
This patch makes CD-ROM support work on Windows 7 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set SATA Mode Select to AHCI in the Address Map Register.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an emulation layer for an ICH-9 AHCI controller. For now
this controller does not do IDE legacy emulation. It is a pure AHCI controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need a PCI ID for our new AHCI adapter. I just picked an ICH-9
because that's the one in the Q35 chipset.
This patch adds a PCI ID define for an ICH-9 AHCI adapter.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I modified ide_identify() to include the zero-based queue length
value in word 75, and set bit 8 in word 76 to signal NCQ support
in the identify data for AHCI SATA drives.
Signed-off-by: Roland Elek <elek.roland@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We hook into transfer_start and immediately call the end function
for ahci. This means that everything needs to be in place for the
end function when we start the transfer, so let's move the function
down to where all state is in place.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen
that a bit, so we can happily replace the DMA backend with different
implementations.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we have the function split out, we have to reindent it.
In order to increase the readability of the actual functional change,
this is split out.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ATA command interpretation code can be used for PATA and SATA
interfaces alike. So let's split it out into a separate function.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit causes the watchdog timer to be reset when a guest is
hard-rebooted.
The failure case previously was as follows:
(a) guest boots, watchdog is enabled
(b) guest does a reset eg:
echo 'b' > /proc/sysrq-trigger
(note that an ordinary /sbin/reboot wouldn't hit this case
since as the watchdog daemon is shut down, the daemon would
properly disable the watchdog device)
(c) the reboot takes longer than the remaining time on the
watchdog
(d) the watchdog therefore fires during the reboot
(e) probably the VM would just reboot again at this point which
is pretty benign, but it could depend on the action that the
user had selected for the watchdog
Now we use the qdev reset function to register a reset handler
which disables the timer. Note the handler is called _either_
just after init _or_ when the guest reboots.
In the i6300esb case there is a small refactoring of the code so
that the device's internal state is now fully restored to defaults
on a reboot.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Change fw_cfg_add_file() to get full file path as a parameter instead
of building one internally. Two reasons for that. First caller may need
to know how file is named. Second this moves policy of file naming out
from fw_cfg. Platform may want to use more then two levels of
directories for instance.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Ports on root hub will have NULL here. This is needed to reconstruct
path from device to its root hub to build device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Store all io ports used by device in ISADevice structure.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
New get_fw_dev_path callback will be used for build device path usable
by firmware in contrast to qdev qemu internal device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add "fw_name" to DeviceInfo to use in device path building. In
contrast to "name" "fw_name" should refer to functionality device
provides instead of particular device model like "name" does.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The device shall set its default hardware state after each reset.
This includes that the timer is stopped which is especially important
if the guest does a reboot independantly of a watchdog bite. I moved
the initialization of the state variables completely from the init
to the reset function which is called right after init during the
first boot and afterwards during each reboot.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Minor clean-up in isa-bus.c. Using hw_error is more consistent.
There is a difference however: hw_error dumps the cpu state.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch converts the ISA MMIO bridge code to always use little endian mmio.
All bswap code that existed was only there to convert from native cpu
endianness to little endian ISA devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.
With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There's no need to bswap once we correctly set the mmio to be little endian.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The only reason we have bswap versions of the pci host code is that
most pci host devices are little endian. The ppc e500 is the only
odd one here, being big endian.
So let's directly pass the endianness down to the mmio layer and not
worry about it on the pci host layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The device is only used on big endian systems, but always byte swaps. That's
a very good indicator that it's actually a little endian device ;-).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As an alternative to the 3 individual handlers, there is also a simplified
io mem hook function. To be consistent, let's add an endianness parameter
there too.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.
This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove some unused variables and return values.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
config write handling for aer seems broken:
For example, it won't clear a level interrupt
when command register is set to 0.
Make it match the spec: level should equal
the logical or of enabled bits, msi only
be sent when the logical or changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Fix the injection logic upon aer message to follow 6.2.4.1.2 more
closely: specifically only send an msi interrupt when the logical or of
the enabled bits changed, not when a bit which was previously clear
becomes set.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
msi depends on pci but pci should not depend on msi.
The only dependency we have is a recent addition
of pci_msi_ functions, IMO they add little enough to
open-code in the small number of users.
Follow-up patches add more cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
pcie aer needs SERR bit to be writable, and the PCI spec requires
this as well. For compatibility, introduce compat global property
command_serr_enable and make this bit readonly for a pre 0.14 pc
machine.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid sending out packets, and modifying
memory, when VM is stopped.
Add assert statements to verify this does not happen.
Avoid scheduling bh when vhost-net is started.
Stop bh when driver disabled bus mastering
(we must not access memory after this).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
DMA into memory while VM is stopped makes it
hard to debug migration (consequitive saves
result in different files).
Fixing this completely is a large effort,
this patch does this for virtio-net.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
ffsl() is not universally available, so there are these warnings
on both mingw32 and OpenBSD:
/src/qemu/hw/pcie_aer.c: In function 'pcie_aer_update_log':
/src/qemu/hw/pcie_aer.c:399: warning: implicit declaration of function 'ffsl'
Since status field in PCIEAERErr is uint32_t, we can just use ffs() instead.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch introduce a fallback mechanism for old systems that do not
support utimensat(). This fix build failure with following warnings:
hw/virtio-9p-local.c: In function 'local_utimensat':
hw/virtio-9p-local.c:479: warning: implicit declaration of function 'utimensat'
hw/virtio-9p-local.c:479: warning: nested extern declaration of 'utimensat'
and:
hw/virtio-9p.c: In function 'v9fs_setattr_post_chmod':
hw/virtio-9p.c:1410: error: 'UTIME_NOW' undeclared (first use in this function)
hw/virtio-9p.c:1410: error: (Each undeclared identifier is reported only once
hw/virtio-9p.c:1410: error: for each function it appears in.)
hw/virtio-9p.c:1413: error: 'UTIME_OMIT' undeclared (first use in this function)
hw/virtio-9p.c: In function 'v9fs_wstat_post_chmod':
hw/virtio-9p.c:2905: error: 'UTIME_OMIT' undeclared (first use in this function)
[NOTE: At this time virtio-9p is only user of utimensat(), and is available
only when host is linux and CONFIG_VIRTFS is defined. So there are
no similar warning for win32. Please provide a wrapper for win32 in
oslib-win32.c if new user really requires it.]
v5:
- Allow fallback on runtime
- Move qemu_utimensat() to oslib-posix.c
- Rebased on latest qemu.git
v4:
- Use tv_now.tv_usec
v3:
- Use better alternative handling for UTIME_NOW/OMIT
- Move qemu_utimensat() to cutils.c
V2:
- Introduce qemu_utimensat()
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: M. Mohan Kumar <mohan@in.ibm.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Running fsstress with debug enabled causes assertion failure
because of inappropriate usage of debug print functions.
With this patch, fsstress passes without assertion failure.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
SYNOPSIS
size[4] Tfsync tag[2] fid[4] datasync[4]
size[4] Rfsync tag[2]
DESCRIPTION
The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other permanent storage
device) where that file resides.
If datasync flag is specified data will be fleshed but does not flush
modified metadata unless that metadata is needed in order to allow a
subsequent data retrieval to be correctly handled.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
We still need advance address even we find there's no dirty pages in
current chunk.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I'd like to disable bandwidth limit or make it very high,
Use int64_t all over to make values >= 4g work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Whenever SSBM is reset in the command register all state information is lost.
Restarting DMA means that current_addr must be reset to the base address of the
PRD table. The OS is not required to change the base address register before
starting a DMA operation, it can reuse the value it wrote for an earlier
request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
You can only start a DMA transfer if it's not running yet, and you can only
cancel it if it's running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
BMIDEA in the status register must be cleared on error. This makes FreeBSD
respond (more) correctly to I/O errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Several places that stop a DMA transfer duplicate this code. Factor it out into
a common function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device. Split the common code frm the PCI code so
that that can be configures independantly.
Signed-off-by: Paul Brook <paul@codesourcery.com>
We parse the CDB twice, which is completely unnecessary.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current sense handling in scsi-bus is only used by the
scsi-disk driver; the scsi-generic driver is using its own.
So we should move the current sense handling into the
scsi-disk driver.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should announce and support the block device characterics page
only on block devices, not on CDROMs. And the VPD page 0x83 has
an off-by-one error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Traditionally, the linux stack is using SCSI status codes
which are shifted by one as compared to those defined in SAM.
A SCSI emulation should naturally return the SAM defined codes,
not the linux ones.
So to avoid any confusion this patch modifies the existing
definitions to match those found in SAM and removes any
(now obsolete) byte-shift from the returned status codes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The SCSI parallel interface has a limit of 8 devices, but
not the SCSI stack in general. So we should be removing the
hard-coded limit and use MAX_SCSI_DEVS instead.
And we only need to scan those devices which are allocated
by the bus.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch can be applied to both qemu-xen and qemu and adds support
for empty write barriers to xen_disk.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI read/write requests should not be re-issued before the current
fragment of I/O completes. There are asserts in scsi-disk.c that guard
this constraint but they trigger on SPARC Linux 2.4. It turns out that
the asserts are too early in the code path and don't allow for read
requests to terminate.
Only the read assert needs to be moved but move the write assert too for
consistency.
Reported-by: Nigel Horne <njh@bandsman.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When migration triggers before a VQ is initialized,
base pa is 0 and last_used_index must be 0 too:
we don't have a ring to compare to.
Reported-by: Juan Quintela <quintela@redhat.com>
Tested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit cd92f4cc22)
Take into account secondary bus reset bit for
bus walk: devices behind a reset bus should not
respond to configuration cycles.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trigger secondary bus reset when secondary bus reset bit
value changes from 0 to 1.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a helper function which triggers reset from a given device.
Will be used by pci bus emulation.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and make it called via qbus_reset_all().
The qbus reset callback will be used by pci bus reset.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch changes the reset handling so that qdev has no knowledge of the
global system reset. Instead, a new bus/device level function is introduced
that allows all devices/buses on the bus/device to be reset using a depth
first transversal.
N.B. we have to expose the implicit system bus because we have various hacks
that result in an implicit system bus existing. Instead, we ought to have an
explicitly created system bus that we can trigger reset from. That's a topic
for a future patch though.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are some cases where you want to walk the busses, in particular, when
searching for a bus either by name or DeviceInfo.
Paolo suggested that we model the return values on how GCC's walkers work which
allows an actor to skip child transversal, or terminate walking with a positive
value that's returned as the qbus_walk_children's result.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).
We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices with different vendor or device ids sometimes share
the same rom code. Only the ids and the checksum
differs in a boot rom for such devices.
The i825xx ethernet controller family is a typical example
which is implemented in hw/eepro100.c. It uses at least
3 different device ids, so normally 3 boot roms would be needed.
By automatically patching vendor id and device id (and the checksum)
in qemu, all emulated family members can share the same boot rom.
VGA bios roms are another example with different vendor and device ids.
Only qemu's built-in default rom files will be patched.
v2:
* Patch also the vendor id (and remove the sanity check for vendor id).
v3:
* Don't patch a rom file when its name was set by the user.
Thus we avoid modifications of unknown rom data.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no need for these type casts (as other existing
code shows). So re-write the first argument without
type cast (and remove a related TODO comment).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci generic layer initialized wmask for bridge control register
according to pci spec. pcie deviates slightly from it,
so initialize it properly.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bits 12 to 15 in bridge control register are reserver and must be
read-only zero, curent mask is 0xffff which makes them writeable. Fix
this up by using symbolic bit names for writeable bits instead of a
hardcoded constant.
Fix a comment w1mask -> w1cmask as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Open-code functions created in the previous patch,
to make code more compact and clear.
Detcted and documented what looks like a bug in code
that becomes apparent from this refactoring.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added some TODOs: they are trivial but omitted here
to make the patch logic as transparent as possible.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements helper functions for pcie aer capability
which will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds W1C bit support in the initialization/reset of pci
status registers.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Errors should be logged using error_report() so they go to the
appropriate monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As pointed out by avi the vgabios update is guest-visible and thus has
migration implications.
One change is that the vga has a valid pci rom bar now. We already have
a pci bus property to enable/disable the rom bar and we'll load the bios
via fw_cfg as fallback for the no-rom-bar case. So we just have to add
compat properties to handle this case.
A second change is that the magic bochs lfb @ 0xe0000000 is gone. When
live-migrating a guest from a older qemu version it might be using the
lfb though, so we have to keep it for the old machine types. The patch
enables the bochs lfb in case we don't have the pci rom bar enabled
(i.e. we are in 0.13+older compat mode).
This patch depends on these patches which add (and use) the pc-0.13
machine type:
http://patchwork.ozlabs.org/patch/70797/http://patchwork.ozlabs.org/patch/70798/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: avi@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While not explicitly stated in the spec, it was observed on real systems
that enabling loopback testing on the pcnet controller disables
reception of external frames. And some legacy software relies on it, so
provide this behavior.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch enables MSI-X for virtfs-9p-pci. It also adds a
compat property to pc-0.13 which turns it of there to stay
compatible to 0.13-stable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have an OS which writes to port 0x400 when probing for special hardware.
This causes an exit of the VM. With SeaBIOS this port isn't used anyway.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-By: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can't let the compiler define the alignment for qemu_cfg data.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds missing braces around if/else statements that call
macros which are likely to result in errors if the macro is
changed. It also makes the code comply better with CODING_STYLE.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A via -kernel supplied x86_64 ELF image is being started in 32bit mode.
Detect and exit if a 64bit image has been supplied.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
local_apics are allocated sequentially and never removed, so
we can stop any iterations that go to MAX_APICS as soon as we
hit the first NULL. Looking at a small guest running a virtio-net
workload with oprofile, this drops apic_get_delivery_bitmask()
from #3 in the profile to down in the noise.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad503 .
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cam Macdonell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device. This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.
Note: pcibus_get_dev_path() copied this code,
inheriting the same bug. pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration. However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.
This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When adding the length to the pseudo header, we're not properly
accounting for overflow.
From: Mark Wu <dwu@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make stdvga provide the new vgabios binary (with pcibios support)
using the PCI option rom bar. Seabios will happily load it from
there. The new vga bios will also lookup the framebuffer address
in pci config space, so the magic bochs lfb @ 0xe0000000 is not
needed any more -> zap it.
Without the patch:
# dmesg | grep framebuffer
vesafb: framebuffer at 0xe0000000, mapped to 0xf7e80000, using 1875k, total 8192k
# lspci -vs2
00:02.0 VGA compatible controller: Technical Corp. Device 1111 (prog-if 00 [VGA controller])
Subsystem: Qumranet, Inc. Device 1100
Physical Slot: 2
Flags: fast devsel
Memory at f0000000 (32-bit, prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
With patch applied:
# dmesg | grep framebuffer
vesafb: framebuffer at 0xf0000000, mapped to 0xf7e80000, using 1875k, total 8192k
# lspci -vs2
00:02.0 VGA compatible controller: Technical Corp. Device 1111 (prog-if 00 [VGA controller])
Subsystem: Qumranet, Inc. Device 1100
Physical Slot: 2
Flags: fast devsel
Memory at f0000000 (32-bit, prefetchable) [size=8M]
Expansion ROM at f0800000 [disabled] [size=64K]
cheers,
Gerd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad503 .
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cam Macdonell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device. This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.
Note: pcibus_get_dev_path() copied this code,
inheriting the same bug. pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration. However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.
This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When adding the length to the pseudo header, we're not properly
accounting for overflow.
From: Mark Wu <dwu@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The HDA bus supports up to 15 codecs, with addresses 0 ... 14.
We get that wrong in two places:
* When handing out addresses we accept address 15 as valid.
* The bitmasks for two registers (WAKEEN and STATESTS) don't
have bit 14 set.
This patch fixes it.
[ v2: codestyle: add braces ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
The HDA bus supports up to 15 codecs, with addresses 0 ... 14.
We get that wrong in two places:
* When handing out addresses we accept address 15 as valid.
* The bitmasks for two registers (WAKEEN and STATESTS) don't
have bit 14 set.
This patch fixes it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
This patch adds MSI support to the intel hda audio driver. It is
enabled by default, use '-device intel-hda,msi=0' to disable it.
[ v2: codestyle: add braces ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
When the guest updates the WAKEEN register we
must re-calculate the IRQ status.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
HDA: Honor WAKEEN bits when deciding to raise an interrupt on codec
status change. This prevents an interrupt storm with the Haiku HDA
driver which does not handle codec status changes in the irq handler.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Add pci exit callback for the intel-hda device and cleanup properly.
Also add an exit callback to the HDA bus implementation and make sure
it is called on qdev_free().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Fix scsi-disk to use the usual completion paths that involve rerror/werror
handling instead of directly completing the requests in cases where
bdrv_aio_readv/writev returns NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix virtio-blk to use the usual completion path that involves werror handling
instead of directly completing the request in cases where bdrv_aio_flush
returns NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pulls the request completion for error cases from the caller to
scsi_disk_emulate_command. This should not change semantics, but allows to
reuse scsi_handle_write_error() for flushes in the next patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This implements the rerror option for SCSI disks.
It also includes minor changes to the write path where the same code is used
that was criticized in the review for the changes to the read path required for
rerror support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds three devices to qemu:
intel-hda
Intel HD Audio Controller, the PCI device. Provides a HDA bus.
Emulates ICH6 at the moment. Adding a ICH9 PCIE
variant shouldn't be hard.
hda-duplex
HDA Codec. Attaches to the HDA bus. Supports 16bit stereo,
rates 16k -> 96k, playback, recording and volume control
(with CONFIG_MIXEMU=y).
hda-output
HDA Codec without recording support. Subset of the hda-duplex
codec. Use this if you don't want your guests access your mic.
Usage: add '-device intel-hda -device hda-duplex' to your command line.
Tested guests:
* Linux works.
* Win7 works.
* DOS (mpxplay) works.
* WinXP doesn't work.
[ v2 changes ]
* Fixed endianess, big endian hosts work now.
* Fixed some emulation bugs.
* Added immediate command emulation.
* Added vmstate support.
* Make it behave like all other sound card drivers:
- can be configured via '--audio-card-list=hda'
- can be added to a VM using '-soundhw hda'
* Code style fixups.
* Zapped guest-triggerable asserts.
* Handle partial reads/writes of audio data correctly.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
TRUE/FALSE are generally reserved keywords and shouldn't be defined in
a driver like this. Rename the macros to SDP_TRUE and SDP_FALSE
respectively.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
config write handlers should be idempotent.
So no need for complex range checks: a simple
one checking that we are touching the relevant capability
will do.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- save/restore must not check w1c bits
since they are in fact guest controlled
- clear w1c bits on reset
Note: for express there are different kinds of
reset, some leave part of config space alone.
We will likely need a sticky bit mask to implement this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify logic for hotplug notification, by tracking state of the
logical interrupt condition. We then simply use this variable to make
the interrupt decision, according to spec.
API is made cleaner as we no longer force users to pass in
old slot control value.
Includes fixes by Isaku Yamahata.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Simplify code slighly by reversing the polarity
for the range check
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
(cherry picked from commit bf1b007123)
Checking available index upon load instead of
only when vm is running makes is easier to
debug failures.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
RAM registration used incorrect offset.
Fix by using the offset obtained previously for this purpose.
Spotted by GCC 4.6.0 20100925 warning, which is also avoided.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The werror option now affects not only write requests, but also flush requests.
Previously, it was not possible to stop a VM on a failed flush.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of always assuming success for bdrv_aio_flush, actually do something
with the error. This respects the werror option and accordingly ignores the
error, reports it to the guest or stops the VM and retries after cont.
Ignoring the error is trivial, obviously. For stopping the VM and retrying
later old code can be reused, but we need to introduce a new status for "retry
a flush". For reporting to the guest, fortunately the same action is required
as for a failed read/write (status = DRDY | ERR, error = ABRT), so this code
can be reused as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ATA does not only have the WCACHE enabled bit in identify word 85, but also
a WCACHE supported bit in word 82. While the Linux kernel is fine with the
latter at least hdparm also needs the former before correctly displaying
the cache settings. There's also a non-zero chance other operating systems
are more picky in their volatile write cache detection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so
it actually receives events. Also make sure we only remove the handler
if we registered it before.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch updates the vmmouse handler registration and activation.
Old behavior:
vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute
unregister the handler and re-register it.
New behavior:
vmmouse_request_relative and vmmouse_request_absolute will unregister
the handler in case the mode did change. Then register and active the
handler with current mode if needed.
Note that the old code never ever *activates* the handler, so the
vmmouse doesn't receive events. This trips up Fedora 14 for example:
Boot a default install without usb tablet, watch the X-Server activating
the vmmouse then, enjoy a non-functional mouse.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
readv & writev, read & write respectively from the current offset
of the file & hence their use has to be preceeded by a call to lseek.
preadv/writev can be used instead, as they take the offset as an argument.
This saves one system call( lseek ).
In case preadv is not supported, it is implemented by an lseek
followed by a readv. Depending upon the configuration of QEMU, the
appropriate read & write methods are selected. This patch also fixes the
zero byte read/write bug & obviates the need to apply a fix for that bug separately.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Sanchit Garg <sancgarg@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
We would need this to make sure we handle the mapped
security model correctly for different xattr names.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
The O_DIRECT flag imposes alignment restrictions on the length and address
of userspace buffers and the file offset of I/Os.
While VirtFS/9P has plans to implement O_DIRECT behavior on the server,
for now we will stick to a behavior like NFS by bypassing the page cache
only on the client. Server may still cache the I/O.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Synopsis
size[4] TReadlink tag[2] fid[4]
size[4] RReadlink tag[2] target[s]
Description
Readlink is used to return the contents of the symoblic link
referred by fid. Contents of symboic link is returned as a
response.
target[s] - Contents of the symbolic link referred by fid.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
SYNOPSIS
size[4] Tfsync tag[2] fid[4]
size[4] Rfsync tag[2]
DESCRIPTION
The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other permanent storage
device) where that file resides.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Synopsis
size[4] TGetlock tag[2] fid[4] getlock[n]
size[4] RGetlock tag[2] getlock[n]
Description
TGetlock is used to test for the existence of byte range posix locks on
a file identified by given fid. The reply contains getlock structure. If
the lock could be placed it returns F_UNLCK in type field of getlock structure.
Otherwise it returns the details of the conflicting locks in the getlock
structure
getlock structure:
type[1] - Type of lock: F_RDLCK, F_WRLCK
start[8] - Starting offset for lock
length[8] - Number of bytes to lock
If length is 0, lock all bytes starting at the location
'start' through to the end of file
proc_id[4] - process id that wants to take lock/owns the task
in case of reply
client[4] - Client id of the system that owns the process
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Synopsis
size[4] TLock tag[2] fid[4] flock[n]
size[4] RLock tag[2] status[1]
Description
Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request
flock structure:
type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
flags[4] - Flags could be either of
P9_LOCK_FLAGS_BLOCK(1) - Blocked lock request, if there is a
conflicting lock exists, wait for that lock to be released.
P9_LOCK_FLAGS_RECLAIM(2) - Reclaim lock request, used when client is
trying to reclaim a lock after a server restrart (due to crash)
start[8] - Starting offset for lock
length[8] - Number of bytes to lock
If length is 0, lock all bytes starting at the location 'start'
through to the end of file
pid[4] - PID of the process that wants to take lock
client_id[4] - Unique client id
status[1] - Status of the lock request, can be
P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
P9_LOCK_GRACE(3)
P9_LOCK_SUCCESS - Request was successful
P9_LOCK_BLOCKED - A conflicting lock is held by another process
P9_LOCK_ERROR - Error while processing the lock request
P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
requests in this period (except locks with
P9_LOCK_FLAGS_RECLAIM flag set)
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
When 9P server fails to create a file due to permission problems it should
return EPERM. However the current 9P2000.L code returns EBADF. EBADF is NOT
a valid return value from open() call.
The problem is because we do not preserve the errno variable properly. If the
file open had failed, the call to close() on the fd in v9fs_post_lcreate()
fails and sets errno to EBADF. We should preserve the errno that we got from
open() and we should call close() only if we had a valid fd.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Replace debug printf statements with tracepoints.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Implement TI x3130 pcie downstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement TI x3130 pcie upstream port switch.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implements pcie root port switch in intel X58 ioh
whose device id is 0x3420.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
define struct PCIEPort which represents common part
of pci express port.(root, upstream and downstream.)
add a helper function for pcie port which can be used commonly by
root/upstream/downstream port.
define struct PCIESlot which represents common part of
pcie slot.(root and downstream.) and helper functions for it.
helper functions for chassis, slot -> PCIESlot conversion.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The lower bits of base/limit registers is RO and shouldn't be zero
cleared on reset. This patch fixes it.
In fact, the default value of base/limit registers aren't specified
in the spec. And some bridges disable forwarding on reset instead of
zeroing base/limit registers.
So introduce one function to disable bridge forwarding so that
such bridges can use it. It will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
add pcie constants to pcie_regs.h.
Those constants should go to Linux pci_regs.h and then the file should
go away eventually.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use pci_clear_bit_word() in pci_device_reset() where appropriate.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this patch implements helper functions to handle msi-x and msi
uniformly.
They will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces helper functions to test-and-{clear, set} mask in configuration
space. pci_{byte, word, long, quad}_test_and_{clear, set}_mask().
They will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clear w1cmask when deleting a pci capability.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Compiling with GCC 4.6.0 20100925 produced warnings like:
/src/qemu/net/tap-win32.c: In function 'tap_win32_open':
/src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable]
Fix by removing the unused variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Compiling with GCC 4.6.0 20100925 produced a warning:
/src/qemu/hw/lsi53c895a.c: In function 'lsi_do_msgout':
/src/qemu/hw/lsi53c895a.c:848:9: error: variable 'len' set but not used [-Werror=unused-but-set-variable]
Fix by adding a dummy cast so that the variable is not unused for
non-debug case.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
