Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.
Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190619162140.133674-8-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve the KVM_{GET,SET}_NESTED_STATE structs by detailing the format
of VMX nested state data in a struct.
In order to avoid changing the ioctl values of
KVM_{GET,SET}_NESTED_STATE, there is a need to preserve
sizeof(struct kvm_nested_state). This is done by defining the data
struct as "data.vmx[0]". It was the most elegant way I found to
preserve struct size while still keeping struct readable and easy to
maintain. It does have a misfortunate side-effect that now it has to be
accessed as "data.vmx[0]" rather than just "data.vmx".
Because we are already modifying these structs, I also modified the
following:
* Define the "format" field values as macros.
* Rename vmcs_pa to vmcs12_pa for better readability.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-7-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added a migration blocker for vCPU exposed with Intel VMX.
However, migration should also be blocked for vCPU exposed with
AMD SVM.
Both cases should be blocked because QEMU should extract additional
vCPU state from KVM that should be migrated as part of vCPU VMState.
E.g. Whether vCPU is running in guest-mode or host-mode.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-6-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If userspace (QEMU) debug guest, when #DB is raised in guest and
intercepted by KVM, KVM forwards information on #DB to userspace
instead of injecting #DB to guest.
While doing so, KVM don't update vCPU DR6 but instead report the #DB DR6
value to userspace for further handling.
See KVM's handle_exception() DB_VECTOR handler.
QEMU handler for this case is kvm_handle_debug(). This handler basically
checks if #DB is related to one of user set hardware breakpoints and if
not, it re-inject #DB into guest.
The re-injection is done by setting env->exception_injected to #DB which
will later be passed as events.exception.nr to KVM_SET_VCPU_EVENTS ioctl
by kvm_put_vcpu_events().
However, in case userspace re-injects #DB, KVM expects userspace to set
vCPU DR6 as reported to userspace when #DB was intercepted! Otherwise,
KVM_REQ_EVENT handler will inject #DB with wrong DR6 to guest.
Fix this issue by updating vCPU DR6 appropriately when re-inject #DB to
guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added migration blocker for vCPU exposed with Intel VMX because QEMU
doesn't yet contain code to support migration of nested virtualization
workloads.
However, that commit missed adding deletion of the migration blocker in
case init of vCPU failed. Similar to invtsc_mig_blocker. This commit fix
that issue.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR IA32_CORE_CAPABILITY is a feature-enumerating MSR, which only
enumerates the feature split lock detection (via bit 5) by now.
The existence of MSR IA32_CORE_CAPABILITY is enumerated by CPUID.7_0:EDX[30].
The latest kernel patches about them can be found here:
https://lkml.org/lkml/2019/4/24/1909
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Message-Id: <20190617153654.916-1-xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V on KVM can only use Synthetic timers with Direct Mode (opting for
an interrupt instead of VMBus message). This new capability is only
announced in KVM_GET_SUPPORTED_HV_CPUID.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enlightened VMCS is enabled by writing to a field in VP assist page and
these require virtual APIC.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synthetic timers operate in hv-time time and Windows won't use these
without SynIC.
Add .dependencies field to kvm_hyperv_properties[] and a generic mechanism
to check dependencies between features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In many case we just want to give Windows guests all currently supported
Hyper-V enlightenments and that's where this new mode may come handy. We
pass through what was returned by KVM_GET_SUPPORTED_HV_CPUID.
hv_cpuid_check_and_set() is modified to also set cpu->hyperv_* flags as
we may want to check them later (and we actually do for hv_runtime,
hv_synic,...).
'hv-passthrough' is a development only feature, a migration blocker is
added to prevent issues while migrating between hosts with different
feature sets.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, there is no doc describing hv-* CPU flags, people are
encouraged to get the information from Microsoft Hyper-V Top Level
Functional specification (TLFS). There is, however, a bit of QEMU
specifics.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's consolidate Hyper-V features handling in hyperv_handle_properties().
The change is necessary to support 'hv-passthrough' mode as we'll be just
copying CPUIDs from KVM instead of filling them in.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM now supports reporting supported Hyper-V features through CPUID
(KVM_GET_SUPPORTED_HV_CPUID ioctl). Going forward, this is going to be
the only way to announce new functionality and this has already happened
with Direct Mode stimers.
While we could just support KVM_GET_SUPPORTED_HV_CPUID for new features,
it seems to be beneficial to use it for all Hyper-V enlightenments when
possible. This way we can implement 'hv-all' pass-through mode giving the
guest all supported Hyper-V features even when QEMU knows nothing about
them.
Implementation-wise we create a new kvm_hyperv_properties structure
defining Hyper-V features, get_supported_hv_cpuid()/
get_supported_hv_cpuid_legacy() returning the supported CPUID set and
a bit over-engineered hv_cpuid_check_and_set() which we will also be
used to set cpu->hyperv_* properties for 'hv-all' mode.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU tracks whether a vcpu is halted using CPUState::halted. E.g.,
after initialization or reset, halted is 0 for the BSP (vcpu 0)
and 1 for the APs (vcpu 1, 2, ...). A halted vcpu should not be
handed to the hypervisor to run (e.g. hax_vcpu_run()).
Under HAXM, Android Emulator sometimes boots into a "vcpu shutdown
request" error while executing in SeaBIOS, with the HAXM driver
logging a guest triple fault in vcpu 1, 2, ... at RIP 0x3. That is
ultimately because the HAX accelerator asks HAXM to run those APs
when they are still in the halted state.
Normally, the vcpu thread for an AP will start by looping in
qemu_wait_io_event(), until the BSP kicks it via a pair of IPIs
(INIT followed by SIPI). But because the HAX accelerator does not
honor cpu->halted, it allows the AP vcpu thread to proceed to
hax_vcpu_run() as soon as it receives any kick, even if the kick
does not come from the BSP. It turns out that emulator has a
worker thread which periodically kicks every vcpu thread (possibly
to collect CPU usage data), and if one of these kicks comes before
those by the BSP, the AP will start execution from the wrong RIP,
resulting in the aforementioned SMP boot failure.
The solution is inspired by the KVM accelerator (credit to
Chuanxiao Dong <chuanxiao.dong@intel.com> for the pointer):
1. Get rid of questionable logic that unconditionally resets
cpu->halted before hax_vcpu_run(). Instead, only reset it at the
right moments (there are only a few "unhalt" events).
2. Add a check for cpu->halted before hax_vcpu_run().
Note that although the non-Unrestricted Guest (!ug_platform) code
path also forcibly resets cpu->halted, it is left untouched,
because only the UG code path supports SMP guests.
The patch is first merged to android emulator with Change-Id:
I9c5752cc737fd305d7eace1768ea12a07309d716
Cc: Yu Ning <yu.ning@intel.com>
Cc: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20190610021939.13669-1-colin.xu@intel.com>
Use a different method to dump avocado job log, to work around
timing-dependent issues in the arm test cases.
-----BEGIN PGP SIGNATURE-----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=Duk0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-06-18
Use a different method to dump avocado job log, to work around
timing-dependent issues in the arm test cases.
# gpg: Signature made Tue 18 Jun 2019 15:39:31 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
Travis: print acceptance tests logs in case of job failure
Revert "travis: Make check-acceptance job more verbose"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit cd219eb1e5 added the read-zeroes option for the null-co and
null-aio block driver, but forgot to add them to the QAPI schema.
Therefore, this option wasn't available in -blockdev and blockdev-add
until now.
Add the missing option in the schema to make it available there, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We generally assume that loosening permission restrictions can never
fail. We have seen in the past that this assumption is wrong. This has
led to crashes because we generally pass &error_abort when loosening
permissions.
However, a failure in such a case should actually be handled in quite
the opposite way: It is very much not fatal, so qemu may report it, but
still consider the operation successful. The only realistic problem is
that qemu may then retain permissions and thus locks on images it
actually does not require. But again, that is not fatal.
To implement this behavior, we make all functions that change
permissions and that pass &error_abort to the initiating function
(bdrv_check_perm() or bdrv_child_check_perm()) evaluate the
@loosen_restrictions value introduced in the previous patch. If it is
true and an error did occur, we abort the permission update, discard the
error, and instead report success to the caller.
bdrv_child_try_set_perm() itself does not pass &error_abort, but it is
the only public function to change permissions. As such, callers may
pass &error_abort to it, expecting dropping permission restrictions to
never fail.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes three functions report whether the necessary permission
change tightens restrictions or not. These functions are:
- bdrv_check_perm()
- bdrv_check_update_perm()
- bdrv_child_check_perm()
Callers can use this result to decide whether a failure is fatal or not
(see the next patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have to start by applying the permission restrictions to new_bs
before we can loosen them on old_bs. See the comment for the
explanation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_top_bs never requests or unshares any permissions. There is no
reason to make this so explicit here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE. Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().
The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary. No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a block node uses bdrv_child_try_set_perm() to change the permission
it takes on its child, the result may be very short-lived. If anything
makes the block layer recalculate the permissions internally, it will
invoke the node driver's .bdrv_child_perm() implementation. The
permission/shared permissions masks that returns will then override the
values previously passed to bdrv_child_try_set_perm().
If drivers want a child edge to have specific values for the
permissions/shared permissions mask, it must return them in
.bdrv_child_perm(). Consequentially, there is no need for them to pass
the same values to bdrv_child_try_set_perm() then: It is better to have
a function that invokes .bdrv_child_perm() and calls
bdrv_child_try_set_perm() with the result. This patch adds such a
function under the name of bdrv_child_refresh_perms().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD. If so, we have to update BDRVRawState.open_flags
accordingly. Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.
blk_iostatus_reset() has only two callers:
1. blk_attach_dev(). This doesn't have anything to do with jobs and
attaching a new guest device won't solve any problem the job
encountered, so no reason to reset the iostatus for the job.
2. qmp_cont(). This resets the iostatus for everything. We can just
call block_job_iostatus_reset() for all block jobs instead of going
through BlockBackend.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the "thistime" variable is not reinitialized on every loop
iteration. This leads to tests that do not yield a run time (because
they failed or were skipped) printing the run time of the previous test
that did. Fix that by reinitializing "thistime" for every test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because Travis doesn't allow us to keep files produced during tests
(such as log files), let's print the complete job log to the "console"
in case of job failures.
This is a debugging aid, and given that there's been some timeouts
happening on some tests, we absolutely needs the logs to have a proper
action.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190607152223.9467-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6d7a134da4.
We'll have a better fix, that will show the full avocado job log
only if a test case failed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit 1120827fa1 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes: 1120827fa1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617160130.3207-1-peter.maydell@linaro.org
The -mon pretty=on|off switch of the -mon option applies only to QMP
monitors. It's silently ignored for HMP. Deprecate this combination so
that we can make it an error in future versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-16-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Monitor.flags contains three different flags: One to distinguish HMP
from QMP; one specific to HMP (MONITOR_USE_READLINE) that is ignored
with QMP; and another one specific to QMP (MONITOR_USE_PRETTY) that is
ignored with HMP.
Split the flags field into three bools and move them to the right
subclass. Flags are still in use for the monitor_init() interface.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-14-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.
What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move HMP infrastructure from monitor/misc.c to monitor/hmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between HMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment reformatted to make checkpatch.pl happy, #include <dirent.h>
moved to fix Windows build, superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move QMP infrastructure from monitor/misc.c to monitor/qmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between QMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[monitor_is_qmp() tidied up to make checkpatch.pl happy,
superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before we can split monitor/misc.c, we need to create a header file that
contains the common definitions that will be used by multiple source
files.
For a start, add the type definitions for Monitor, MonitorHMP and
MonitorQMP and their dependencies. We'll add functions as needed when
splitting monitor/misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Header guard symbol tidied up, superfluous #include dropped, FIXME in
hmp_change() resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This renames the type for HMP monitor commands and the tables holding
the commands to make clear that they are related to HMP and to allow
making them public later:
* mon_cmd_t -> HMPCommand (fixing use of a reserved name, too)
* mon_cmds -> hmp_cmds
* info_cmds -> hmp_info_cmds
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[sortcmdlist() cleaned up to make checkpatch.pl happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
