The values to read/write to/from physical memory are copied directly to the
physical address with no endian swapping required.
Also add some extra information to debugging output while we are here.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current DBDMA command is stored in little-endian format, so make sure
we convert it to match our CPU when updating the DBDMA_CMDPTR_LO register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By default large amounts of DBDMA debugging are produced when often it is just
1 or 2 channels that are of interest. Introduce DEBUG_DBDMA_CHANMASK to allow
the developer to select the channels of interest at compile time, and then
further add the extra channel information to each debug statement where
possible.
Also clearly mark the start/end of DBDMA_run_bh to allow tracking the bottom
half execution.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enabling DBDMA_DPRINTF unconditionally ensures that any errors in debug
statements are picked up immediately.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.
Let's add also AST2500_A0_SILICON_REV for future use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
=sz/L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, we use memory_region_is_mapped() to detect if the host
backend memory is being used. This works if the memory is directly
mapped into guest's address space, however, it is not true for
nvdimm as it uses aliased memory region to map the memory. This is
why this bug can happen:
https://bugzilla.redhat.com/show_bug.cgi?id=1352769
Fix it by introduce a new filed, is_mapped, to HostMemoryBackend,
we set/clear this filed accordingly when the device link/unlink to
host backend memory
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Changes:
* support 10-bit ASIDs
* MIPS64R6-generic renamed to I6400
* initial GIC support
* implement RESET_BASE register in CM GCR
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJXhMtOAAoJEFIRjjwLKdprahQH/2qBMp7Hnucy7jhiPHRtRZTo
zZAhuRJ0Z2LT9xH+sTg3HcjHI7aXps5cG2f7Fw4X/JKNRY4KO19yEBnMhc5he2Ut
XPtHCeMXXq6zU4RMHqlx6wChHn5AUll/3EeSvm6JMV+HhE6oDBk1yl5C8ipPlVCd
KEz6LlUFNMbuxu2tM4DoMNAWeKmunBx3vO+JuErB6hjCWM5G0mV9aPDkbwTOmVLn
qGgzzmNDiPE6JWrSpbHetsdCO7V9xtXzhcFsu240GJ/+XJMjUXb1m6ETsJxT9EYh
vLfFzwozBSjX6ZQZVNFIAeJZnq96NOHqZ56sU7s4YktVXjl26JAahScTTH0aiNo=
=sTce
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160712' into staging
MIPS patches 2016-07-12
Changes:
* support 10-bit ASIDs
* MIPS64R6-generic renamed to I6400
* initial GIC support
* implement RESET_BASE register in CM GCR
# gpg: Signature made Tue 12 Jul 2016 11:49:50 BST
# gpg: using RSA key 0x52118E3C0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20160712:
target-mips: enable 10-bit ASIDs in I6400 CPU
target-mips: support CP0.Config4.AE bit
target-mips: change ASID type to hold more than 8 bits
target-mips: add ASID mask field and replace magic values
target-mips: replace MIPS64R6-generic with the real I6400 CPU model
hw/mips_cmgcr: implement RESET_BASE register in CM GCR
hw/mips_cpc: make VP correctly start from the reset vector
target-mips: add exception base to MIPS CPU
hw/mips/cps: create GIC block inside CPS
hw/mips: implement Global Interrupt Controller
hw/mips: implement GIC Interval Timer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement RESET_BASE register which is local to each VP and a write to
it changes VP's reset exception base. Also, add OTHER register to
allow a software running on one VP to access other VP's local registers.
Guest can use this mechanism to specify custom address from which a VP
will start execution.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
When VP enters the Run state it starts execution from the reset vector.
Currently used CPU_INTERRUPT_WAKE does not do that if reset exception
base has been modified. Therefore fix that by simply resetting given VP.
Drop the usage of CPU_INTERRUPT_WAKE also in VP_STOP and instead raise
the CPU_INTERRUPT_HALT to halt a VP.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
In various Freescale SOCs, the GPT timers can be configured to select
its input clock.
Depending on the SOC the set of available input clocks may vary.
The actual single GPT definition was no good enough and because of it
booting the sabrelite board with a i.MX6DL device tree would fail
because of an incorrect input clock definition for the i.MX6DL SOC.
This patch fixes the i.MX6DL boot failure by adding the ability to
define a different set of input clocks depending on the considered SOC.
A different class has been defined for i.MX25, i.MX31 and i.MX6 each with
its specific set of input clocks.
The patch has been tested by booting KZM, i.MX25 PDK, i.MX6Q sabrelite
and i.MX6DL sabrelite.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 1467325619-8374-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed spacing round '/' operator]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Windows 'aux.*' is a reserved name and cannot be used for
filenames; see
https://msdn.microsoft.com/en-gb/library/windows/desktop/aa365247(v=vs.85).aspx
This prevents cloning the QEMU git repo on Windows:
C:\Java\sources\kvm> git clone https://github.com/qemu/qemu.git
Cloning into 'qemu'...
remote: Counting objects: 279563, done.
remote: Total 279563 (delta 0), reused 0 (delta 0), pack-reused 279563R
Receiving objects: 100% (279563/279563), 122.45 MiB | 3.52 MiB/s, done.
Resolving deltas: 100% (221942/221942), done.
Checking connectivity... done.
error: unable to create file hw/misc/aux.c (No such file or directory)
error: unable to create file include/hw/misc/aux.h (No such file or directory)
Checking out files: 100% (4795/4795), done.
fatal: unable to checkout working tree
warning: Clone succeeded, but checkout failed.
You can inspect what was checked out with 'git status'
and retry the checkout with 'git checkout -f HEAD'
(bug https://bugs.launchpad.net/bugs/1595240)
Rename the offending files for the benefit of Windows.
Reported-by: Алексей Курган <akurgan@yandex.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1467377145-32385-1-git-send-email-peter.maydell@linaro.org
The last "ret = AUX_I2C_NACK;" is dead, because it is always overridden
by AUX_I2C_ACK. What really the code wants is to jump out of the switch
statement, and a "return" will not cut it because it would omit a debug
printf.
Change the logic so that we can break out of the while loop. For clarity,
hoist the bus->last_* assignments up, right after i2c_start_transfer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This enables qemu to handle late inits and report errors. All the SSI
slave routine names were changed accordingly. Code was modified to
handle errors when possible (m25p80 and ssi-sd)
Tested with the m25p80 slave object.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently vmport device is identified by the string literal. Using a
preprocessor alias instead is preferable.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tracing configurations error out currently as follows:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c: In function ‘aspeed_scu_read’:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:9: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:9: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:23: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:23: note: each undeclared identifier is reported only once for each function it appears in
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c: In function ‘aspeed_scu_write’:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:154:23: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
This is caused by a missing header file. Fix it.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20160627215304.821-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SCU is a collection of chip-level control registers that manage the
various functions supported by ASPEED SoCs. Typically the bits control
interactions with clocks, external hardware or reset behaviour, and we
can largly take a hands-off approach to reads and writes.
Firmware makes heavy use of the state to determine how to boot, but the
reset values vary from SoC to SoC (eg AST2400 vs AST2500). A qdev
property is exposed so that the integrating SoC model can configure the
silicon revision, which in-turn selects the appropriate reset values.
Further qdev properties are exposed so the board model can configure the
board-dependent hardware strapping.
Almost all provided AST2400 reset values are specified by the datasheet.
The notable exception is SOC_SCRATCH1, where we mark the DRAM as
successfully initialised to avoid unnecessary dark corners in the SoC's
u-boot support.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1466744305-23163-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: drop unnecessary inttypes.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the hw/misc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old milkymist.org domain just forwards to mm-labs.hk nowadays. I've
created a mirror of the documents.
Signed-off-by: Michael Walle <michael@walle.cc>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces a new bus: aux-bus.
It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove direct uses of ram_addr_t and optimize memory_region_{get,set}_fd
now that a MemoryRegion knows its RAMBlock directly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Memory barriers are needed also by Xen and, when the ioeventfd
bugs are fixed, by TCG as well.
sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to
the actual users.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This controller is also present in i.MX5X devices but they are not
yet emulated by QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the framebuffer settings are copied into the result message before it is
reconfigured, inconsistent behavior can happen when, for instance, you set with
a single message the width, height, and depth, and ask at the same time to
allocate the buffer and get the pitch and the size.
In this case, the reported pitch and size would be incorrect as they were
computed with the initial values of width, height and depth, not the ones the
client requested.
Signed-off-by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1461325343-24995-1-git-send-email-sylvain@sylvaingarrigues.com
[PMM: folded a couple of long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the new framework the cuda_cmd_set_time command directly receive
the data, without the command byte. Therefore the time is stored at
in_data[0], not at in_data[1].
This fixes the "hwclock --systohc" command in a guest.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[this fixes a regression introduced by e647317 "cuda: port SET_TIME
command to new framework"]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
"qemu -device ivshmem-{plain,doorbell}" will crash, because the device
doesn't check that the required argument is provided. (screwed up in
commit 5400c02)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fix off-by-one error in ITC Tag read.
Remove the switch as we just want to check if index is in valid range
rather than test against list of values.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Teach PCI testdev to use fast MMIO when kvm makes it available.
Before:
mmio-wildcard-eventfd:pci-mem 2271
After:
mmio-wildcard-eventfd:pci-mem 1218
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bypass View does not cause issuing thread to block and does not affect
any of the cells state bit.
Read from a FIFO cell returns the value of the oldest entry.
Store to a FIFO cell changes the value of the newest entry.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
P/V Synchronized and Try Views can be used to access Semaphore cells.
Load returns current value and post-decrements the value in the cell
(until it reaches zero). Stores increment the value (until it saturates
at 0xFFFF).
P/V Synchronized View causes the issuing thread to block on read if value
is 0. P/V Try View does not block the thread, it returns 0 in this case.
Cell's Empty and Full bits are not modified.
Trap bit (i.e. Gating Storage exceptions) not implemented.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Empty/Full Synchronized and Try views can be used to access FIFO cells.
Store to the FIFO cell pushes the value into the queue, load pops the oldest
element from the queue. Cell's Full and Empty bits are automatically updated
to reflect new state of the cell.
Empty/Full Synchronized View causes the issuing thread to block when FIFO is
empty while thread is performing a read, or FIFO is full while thread is
performing a write.
Empty/Full Try View never blocks the thread. If cell is full then write is
ignored, if cell is empty then load returns 0.
Trap bit (i.e. Gating Storage exceptions) not implemented.
Store Conditional support for E/F Try View (i.e. indicate failure if FIFO
is full) not implemented.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Control view is used to access the ITC Storage Cell Tags. It never causes
the issuing thread to block.
Guest can empty the FIFO cell by setting Empty bit to 1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Implement ITC as a single object consisting of two memory regions:
1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which
are accessible by the CPU via CACHE instruction. Also adding
MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will
dispatch reads/writes directly.
2) storage_io: memory-mapped ITC Storage whose address space is configurable
(i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers.
ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the
ITC cell tag indicates the type of the cell. If the ITC Storage contains
both types of cells then FIFOs are located before Semaphores.
Since issuing thread can get blocked on the access to a cell (in E/F
Synchronized and P/V Synchronized Views) each cell has a bitmap to track
which threads are currently blocked.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Create Cluster Power Controller and add a link to the CPC MemoryRegion
in GCR. Guest can enable / map CPC to any physical address by writing to
the memory-mapped GCR_CPC_BASE register.
Set vp-start-reset property to 1 to allow only first VP to run from reset.
Others are brought up by the guest via CPC memory-mapped registers.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Cluster Power Controller (CPC) is responsible for power management in
multiprocessing system. It provides registers to control the power and the
clock frequency of the individual elements in the system.
This patch implements only three registers that are used to control the
power state of each VP on a single core:
* VP Run is a write-only register used to set each VP to the run state
* VP Stop is a write-only register used to set each VP to the suspend state
* VP Running is a read-only register indicating the run state of each VP
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add initial GCR support to indicate number of VPs present in the system,
L2 bypass mode and revision number.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com:
* removed GIC part,
* changed commit message,
* replaced %lx format spec. with PRIx64,
* renamed mips_gcr.{c,h} to mips_cmgcr.{c,h},
* replaced CONFIG_MIPS_GIC with CONFIG_MIPS_CPS]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
hw/hw.h includes qemu-common.h, but its users generally need only
hw_error() and qemu/module.h from it. Move the former to hw/hw.h,
include the latter there, and drop the ill-advised include.
hw/misc/cbus.c now misses hw_error(), so include hw/hw.h there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration with ivshmem needs to be carefully orchestrated to work.
Exactly one peer (the "master") migrates to the destination, all other
peers need to unplug (and disconnect), migrate, plug back (and
reconnect). This is sort of documented in qemu-doc.
If peers connect on the destination before migration completes, the
shared memory can get messed up. This isn't documented anywhere. Fix
that in qemu-doc.
To avoid messing up register IVPosition on migration, the server must
assign the same ID on source and destination. ivshmem-spec.txt leaves
ID assignment unspecified, however.
Amend ivshmem-spec.txt to require the first client to receive ID zero.
The example ivshmem-server complies: it always assigns the first
unused ID.
For a bit of additional safety, enforce ID zero for the master. This
does nothing when we're not using a server, because the ID is zero for
all peers then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-40-git-send-email-armbru@redhat.com>
Move code to more sensible places. Use the opportunity to reorder and
document IVShmemState members.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-38-git-send-email-armbru@redhat.com>
ivshmem can be configured with and without interrupt capability
(a.k.a. "doorbell"). The two configurations have largely disjoint
options, which makes for a confusing (and badly checked) user
interface. Moreover, the device can't tell the guest whether its
doorbell is enabled.
Create two new device models ivshmem-plain and ivshmem-doorbell, and
deprecate the old one.
Changes from ivshmem:
* PCI revision is 1 instead of 0. The new revision is fully backwards
compatible for guests. Guests may elect to require at least
revision 1 to make sure they're not exposed to the funny "no shared
memory, yet" state.
* Property "role" replaced by "master". role=master becomes
master=on, role=peer becomes master=off. Default is off instead of
auto.
* Property "use64" is gone. The new devices always have 64 bit BARs.
Changes from ivshmem to ivshmem-plain:
* The Interrupt Pin register in PCI config space is zero (does not use
an interrupt pin) instead of one (uses INTA).
* Property "x-memdev" is renamed to "memdev".
* Properties "shm" and "size" are gone. Use property "memdev"
instead.
* Property "msi" is gone. The new device can't have MSI-X capability.
It can't interrupt anyway.
* Properties "ioeventfd" and "vectors" are gone. They're meaningless
without interrupts anyway.
Changes from ivshmem to ivshmem-doorbell:
* Property "msi" is gone. The new device always has MSI-X capability.
* Property "ioeventfd" defaults to on instead of off.
* Property "size" is gone. The new device can only map all the shared
memory received from the server.
Guests can easily find out whether the device is configured for
interrupts by checking for MSI-X capability.
Note: some code added in sub-optimal places to make the diff easier to
review. The next commit will move it to more sensible places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-37-git-send-email-armbru@redhat.com>
In preparation of making it a qdev property.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-36-git-send-email-armbru@redhat.com>
ivshmem_realize() puts the shared memory region in a container region.
Used to be necessary to permit delayed mapping of the shared memory.
However, we recently moved to synchronous mapping, in "ivshmem:
Receive shared memory synchronously in realize()" and the commit
following it. The container is redundant since then. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-33-git-send-email-armbru@redhat.com>
ivshmem has its very own code to create and map shared memory.
Replace that with an implicitly created memory backend. Reduces the
number of ways we create BAR 2 from three to two.
The memory-backend-file is currently available only with CONFIG_LINUX,
so this adds a second Linuxism to ivshmem (the other one is eventfd).
Should we ever need to make it portable to systems where
memory-backend-file can't be made to serve, we could create a
memory-backend-shmem that allocates memory with shm_open().
Bonus fix: shared memory files are now created with permissions 0655
instead of 0777.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-32-git-send-email-armbru@redhat.com>
If size_t is narrower than 64 bits, passing uint64_t ivshmem_size to
mmap() truncates. Reject such sizes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-31-git-send-email-armbru@redhat.com>
Short reads from a UNIX domain sockets are exceedingly unlikely when
the other side always sends eight bytes and we always read eight
bytes. We cope with them anyway. However, the code doing that is
rather convoluted. Dumb it down radically.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-30-git-send-email-armbru@redhat.com>
The chardev must be capable of transmitting SCM_RIGHTS ancillary
messages. We check it by comparing CharDriverState member filename to
"unix:". That's almost as brittle as it is disgusting.
When the actual transmission all happened asynchronously, this check
was all we could do in realize(), and thus better than nothing. But
now we receive at least one SCM_RIGHTS synchronously in realize(),
it's not worth its keep anymore. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-29-git-send-email-armbru@redhat.com>
The protocol specification (ivshmem-spec.txt, formerly
ivshmem_device_spec.txt) has always required the ID message to be sent
right at the beginning, and ivshmem-server has always complied. The
device, however, accepts it out of order. If an interrupt setup
arrived before it, though, it would be misinterpreted as connect
notification. Fix the latent bug by relying on the spec and
ivshmem-server's actual behavior.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-28-git-send-email-armbru@redhat.com>
This kills off the funny state described in the previous commit.
Simplify ivshmem_io_read() accordingly, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1458066895-20632-27-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When configured for interrupts (property "chardev" given), we receive
the shared memory from an ivshmem server. We do so asynchronously
after realize() completes, by setting up callbacks with
qemu_chr_add_handlers().
Keeping server I/O out of realize() that way avoids delays due to a
slow server. This is probably relevant only for hot plug.
However, this funny "no shared memory, yet" state of the device also
causes a raft of issues that are hard or impossible to work around:
* The guest is exposed to this state: when we enter and leave it its
shared memory contents is apruptly replaced, and device register
IVPosition changes.
This is a known issue. We document that guests should not access
the shared memory after device initialization until the IVPosition
register becomes non-negative.
For cold plug, the funny state is unlikely to be visible in
practice, because we normally receive the shared memory long before
the guest gets around to mess with the device.
For hot plug, the timing is tighter, but the relative slowness of
PCI device configuration has a good chance to hide the funny state.
In either case, guests complying with the documented procedure are
safe.
* Migration becomes racy.
If migration completes before the shared memory setup completes on
the source, shared memory contents is silently lost. Fortunately,
migration is rather unlikely to win this race.
If the shared memory's ramblock arrives at the destination before
shared memory setup completes, migration fails.
There is no known way for a management application to wait for
shared memory setup to complete.
All you can do is retry failed migration. You can improve your
chances by leaving more time between running the destination QEMU
and the migrate command.
To mitigate silent memory loss, you need to ensure the server
initializes shared memory exactly the same on source and
destination.
These issues are entirely undocumented so far.
I'd expect the server to be almost always fast enough to hide these
issues. But then rare catastrophic races are in a way the worst kind.
This is way more trouble than I'm willing to take from any device.
Kill the funny state by receiving shared memory synchronously in
realize(). If your hot plug hangs, go kill your ivshmem server.
For easier review, this commit only makes the receive synchronous, it
doesn't add the necessary error propagation. Without that, the funny
state persists. The next commit will do that, and kill it off for
real.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-26-git-send-email-armbru@redhat.com>
close_peer_eventfds() cleans up three things: ioeventfd triggers if
they exist, eventfds, and the array to store them.
Commit 98609cd (v1.2.0) fixed it not to clean up ioeventfd triggers
when they don't exist (property ioeventfd=off, which is the default).
Unfortunately, the fix also made it skip cleanup of the eventfds and
the array then. This is a memory and file descriptor leak on unplug.
Additionally, the reset of nb_eventfds is skipped. Doesn't matter on
unplug. On peer disconnect, however, this permanently wedges the
interrupt vectors used for that peer's ID. The eventfds stay behind,
but aren't connected to a peer anymore. When the ID gets recycled for
a new peer, the new peer's eventfds get assigned to vectors after the
old ones. Commonly, the device's number of vectors matches the
server's, so the new ones get dropped with a "Too many eventfd
received" message. Interrupts either don't work (common case) or go
to the wrong vector.
Fix by narrowing the conditional to just the ioeventfd trigger
cleanup.
While there, move the "invalid" peer check to the only caller where it
can actually happen, and tighten it to reject own ID.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-25-git-send-email-armbru@redhat.com>
ivshmem_read() processes server messages. These are 64 bit signed
integers. -1 is shared memory setup, 16 bit unsigned is a peer ID,
anything else is invalid.
ivshmem_read() rejects invalid negative messages right away, silently.
Invalid positive messages get rejected only in resize_peers(), and
ivshmem_read() then prints the rather cryptic message "failed to
resize peers array".
Extend the first check to cover all invalid messages, make it report
"server sent invalid message", and drop the second check.
Now resize_peers() can't fail anymore; simplify.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-23-git-send-email-armbru@redhat.com>
An interrupt is set up when the interrupt's file descriptor is
received. Each message applies to the next interrupt vector.
Therefore, each vector cannot be set up more than once.
ivshmem_add_kvm_msi_virq() half-heartedly tries not to rely on this by
doing nothing then, but that's not going to recover from this error
should it become possible in the future. watch_vector_notifier()
doesn't even try.
Simply assert what is the case, so we get alerted if we ever screw it
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-22-git-send-email-armbru@redhat.com>
The ivshmem device can either use MSI-X or legacy INTx for interrupts.
With MSI-X enabled, peer interrupt events trigger an MSI as they
should. But software can still raise INTx via interrupt status and
mask register in BAR 0. This is explicitly prohibited by PCI Local
Bus Specification Revision 3.0, section 6.8.3.3:
While enabled for MSI or MSI-X operation, a function is prohibited
from using its INTx# pin (if implemented) to request service (MSI,
MSI-X, and INTx# are mutually exclusive).
Fix the device model to leave INTx alone when using MSI-X.
Document that we claim to use INTx in config space even when we don't.
Unlike other devices, ivshmem does *not* use INTx when configured for
MSI-X and MSI-X isn't enabled by software.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-21-git-send-email-armbru@redhat.com>
There are three predicates related to MSI-X:
* ivshmem_has_feature(s, IVSHMEM_MSI) is true unless the non-MSI-X
variant of the device is selected with msi=off.
* msix_present() is true when the device has the PCI capability MSI-X.
It's initially false, and becomes true during successful realize of
the MSI-X variant of the device. Thus, it's the same as
ivshmem_has_feature(s, IVSHMEM_MSI) for realized devices.
* msix_enabled() is true when msix_present() is true and guest software
has enabled MSI-X.
Code that differs between the non-MSI-X and the MSI-X variant of the
device needs to be guarded by ivshmem_has_feature(s, IVSHMEM_MSI) or
by msix_present(), except the latter works only for realized devices.
Code that depends on whether MSI-X is in use needs to be guarded with
msix_enabled().
Code review led me to two minor messes:
* ivshmem_vector_notify() calls msix_notify() even when
!msix_enabled(), unlike most other MSI-X-capable devices. As far as
I can tell, msix_notify() does nothing when !msix_enabled(). Add
the guard anyway.
* Most callers of ivshmem_use_msix() guard it with
ivshmem_has_feature(s, IVSHMEM_MSI). Not necessary, because
ivshmem_use_msix() does nothing when !msix_present(). That's
ivshmem's only use of msix_present(), though. Guard it
consistently, and drop the now redundant msix_present() check.
While there, rename ivshmem_use_msix() to ivshmem_msix_vector_use().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1458066895-20632-20-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If pci_ivshmem_realize() fails after it created its migration blocker,
the blocker is left in place. Fix that by creating it last.
Likewise, if it fails after it called fifo8_create(), it leaks fifo
memory. Fix that the same way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-18-git-send-email-armbru@redhat.com>
We reuse errp after passing it host_memory_backend_get_memory(). If
both host_memory_backend_get_memory() and the reuse set an error, the
reuse will fail the assertion in error_setv(). Fortunately,
host_memory_backend_get_memory() can't fail.
Pass it &error_abort to make our assumption explicit, and to get the
assertion failure in the right place should it become invalid.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-17-git-send-email-armbru@redhat.com>
Yes, the chardev is commonly useless after we read a bad version from
it, but destroying it is inappropriate anyway: the user created it, so
the user should be able to hold on to it as long as he likes. We
don't destroy it on other errors. Screwed up in commit 5105b1d.
Stop reading instead.
Also note QEMU's behavior in ivshmem-spec.txt.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-16-git-send-email-armbru@redhat.com>
IVShmemState member eventfd_chr is useless since commit 9940c32. Drop
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-14-git-send-email-armbru@redhat.com>
The property channel driver now interfaces with the framebuffer device
to query and set framebuffer parameters. As a result of this, the "get
ARM RAM size" query now correctly returns the video RAM base address
(not total RAM size), and the ram-size property is no longer relevant
here.
Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-5-git-send-email-Andrew.Baumann@microsoft.com
[AB: cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
EPIT, GPT and other i.MX timers are using "abstract" clocks among which
a CLK_IPG_HIGH clock.
On i.MX25 and i.MX31 CLK_IPG and CLK_IPG_HIGH are mapped to the same clock
but on other SOC like i.MX6 they are mapped to distinct clocks.
This patch add the CLK_IPG_HIGH to prepare for SOC where these 2 clocks are
different.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 224bf650194760284cb40630e985867e1373276a.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most clocks supported by the CCM are useless to the qemu framework.
Only clocks related to timers (EPIT, GPT, PWM, WATCHDOG, ...) are usefull
to QEMU code.
Therefore this patch removes clock computation handling for all clocks but:
* CLK_NONE,
* CLK_IPG,
* CLK_32k
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9e7222efb349801032e60c0f6b0fbad0e5dcf648.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This way all CCM clock defines/enums are named CLK_XXX
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 8537df765c1713625c7a8b9aca4c7ca60b42e0c0.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All references to mr->ram_addr are replaced by
memory_region_get_ram_addr(mr) (except for a few assertions that are
replaced with mr->ram_block).
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-5-git-send-email-famz@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's
endianness, whereas device model code should be independent of
it. This changes the relevant Raspberry Pi devices to explicitly call
the little-endian variants.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this, it's easier to know if a guest uses an invalid and/or unimplemented
DMA channel.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently don't emulate the I2C bus provided by CUDA.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It doesn't seem to be used, and operating systems should accept a 'unknown command' answer.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This command tells if computer should automatically wake-up after a power loss.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also implement the command, by taking device list mask into account
when polling ADB devices.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also implement the command, by removing the hardcoded period of 20 ms/50 Hz
and replacing it by the one requested by user.
Update VMState version to store this new parameter.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Next commits will port existing CUDA commands to this framework.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return a valid value from the BCM2835 property mailbox query "get board
revision". This query is used by U-Boot. Implementing it fixes the first
obvious difference between qemu and real HW.
The value returned is currently hard-coded to match the RPi2 I own. Other
values are legal, e.g. different board manufacturer field values are
likely to exist in the wild.
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454993910-24077-1-git-send-email-swarren@wwwdotorg.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to repeat 'struct Visitor' when we already have it in
typedefs.h. Omitting the redundant 'struct' also makes a later
patch easier to search for all object property callbacks that
are associated with a Visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This sits behind the mailbox interface, and implements
request/response queries for system properties. The
framebuffer-related properties will be added in a later patch.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify the interrupt handling by having a single callback on irq&msi
cases. Remove usage of CharDriver, replace it with
qemu_set_fd_handler(). Use event_notifier_test_and_clear() to read the
eventfd.
Before this patch, ivshmem writes the first byte received to
s->intrstatus. But ivshmem_device_spec.txt says "The status register is
set to 1 when an interrupt occurs." Fortunately, the byte usually comes
from another ivshmem device, and those always write 1.
After this commit, follows the specification, set to 1 when an interrupt
occurs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Call ivshmem_setup_interrupts() with or without MSI, always allocate
msi_vectors that is going to be used in all case in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fix crash when msi=false introduced in 660c97ee (msi_vectors is NULL in
this case)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This avoids MacsBug hanging at startup in the absence of ADB mouse
input, by replying with an error (which is also what MOL does) when
it sends an unknown command (0x1c).
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include some fields missed from the previous VMState conversion to the
migration stream, as well as the new SR_INT delay timer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that we include the DBDMA controller state in the migration
stream.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-25-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-9-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'
together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.
All the uses in hw/ were using the wrong type by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
This bounds check was off-by-one. Fix.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1453101737-11255-1-git-send-email-crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this i.MX25 and i.MX31 will have closer implementations.
Moreover all i.MX31 CCM registers are now present.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
for educational PCI device
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If virtio-net driver allocates memory in ivshmem shared memory,
vhost-net will work correctly, but vhost-user will not work because
a fd of shared memory will not be sent to vhost-user backend.
This patch fixes ivshmem to store file descriptor of shared memory.
It will be used when vhost-user negotiates vhost-user backend.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to prepare for CCM code refactoring.
This is just a bit of function and enum values renaming.
We also remove some useless intermediate variables.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.
We change the CCMR reg reset value to match linux expected config.
This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.
With this change the "sleep 60" command on linux is time accurate
with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device's guest interface and its QEMU user interface are
flawed^Whotly debated. We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.
To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for sharing the code between timers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that we also clear the data and clock interrupts at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:
Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)
Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to have debug code always compiled during build.
We standardize all debug output on the following format:
[QOM_TYPE_NAME]reporting_function: debug message
The qemu_log_mask() output is following the same format as the
above debug.
Adding some missing qemu_log_mask call for bad registers.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 293e08f31cbb4df84d58f693243e61e770c73b3a.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current ivshmem protocol uses 'long' for integers. But the
sizeof(long) depends on the host and the endianess is not defined, which
may cause portability troubles.
Instead, switch to using little-endian int64_t. This breaks the
protocol, except on x64 little-endian host where this change
should be compatible.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use irqfd for improving context switch when notifying the guest.
If the host doesn't support kvm irqfd, regular msi notifications are
still supported.
Note: the ivshmem implementation doesn't allow switching between MSI and
IO interrupts, this patch doesn't either.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The array is used to have vector specific data, so use a more
descriptive name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
No need to store an extra int for the vector number when it can be
computed easily by looking at the position in the array.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Instead of handling allocation, teach ivshmem to use a memory backend.
This allows to use hugetlbfs backed memory now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use the common qemu utility function to parse the memory size.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Remove shm_fd from device state, closing it as early as possible to avoid leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version. Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The interrupt mask is a state value, it should be reset, like the
interrupt status.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The number of eventfd that can be handled per peer is limited by the
number of vectors. Return an error when receiving too many of them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The terms 'guest' and 'peer' are used sometime interchangeably which may
be confusing. Instead, use 'peer' for the remote instances of ivshmem
clients, and 'guest' for the local VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Free all objects owned by the device, making sure the device is free,
fixing hot-unplug.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The server should not change the shm, and this isn't handled by qemu and
we should should verify this in qemu.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
0 is a valid fd value, so change conditions and set -1 value early
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
load_state_old() is used to keep compatibility with version 0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The common version correctly checks for 0 value case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Both if branches return, move this out to common end.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use some more explicit variables to simplify the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The server shouldn't send invalid peer id, so print an error if it's the
case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The test whether the chardev is an AF_UNIX socket rejects
"-chardev socket,id=chr0,path=/tmp/foo,server,nowait -device
ivshmem,chardev=chr0", but fails to explain why.
Use an explicit error on why a chardev may be rejected.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
max_peer isn't really useful, it tracks the maximum received VM id, but
that quickly matches nb_peers, the size of the peers array. Since VM
come and go, there might be sparse peers so it doesn't help much in
general to have this value around.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
There is no peer when device is initialized, do not let doorbell for
inexisting peer 0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
val isn't used in ivshmem_update_irq() function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
It simplifies a bit the code to allocate the array when setting the
number of peers instead of lazily when receiving the first vector.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Set the number of peers and array allocation in a single place. Rename
to better reflect the function content.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Limit the maximum number of peers to MAXUINT16. This is more realistic
and better matches the limit of the doorbell register.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use the latest qemu device modeling API, in particular, convert to
realize to fix the error handling; right now a botched device_add
ivhsmem command kills the VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
qemu_chr_fe_get_msgfd() transfers ownership, there is no need to dup the
fd.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Make a new function fifo_update_and_get() that can be reused by other
functions (in next commits).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
If the fifo has 0 bytes, and the read is of size 1, the call to
fifo8_push_all() will copy off boundary data.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
ivshmem_read() only reads sizeof(long) from the input buffer. Accepting
more could lead to fifo8 abort() on 32bit systems if fifo is not empty.
A following patch will change the protocol to 64-bit little-endian
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
macio is a bridge between the PCI bus and the Mac nvram,
IDE controller and PIC, so add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cuda is a bridge between PowerMac system bus and the ADB controller,
real-time clock, pram and the power management unit.
So add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The /4 for offset calculation in MMIO writes was happening twice giving
wrong write offsets. Fix.
While touching the code, change the if-else to be a short returning if
and convert the debug message to a GUEST_ERROR, which is more accurate
for this condition.
Cc: qemu-stable@nongnu.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DBDMA_init is not idempotent, and calling it from instance_init
breaks a simple object_new/object_unref pair. Work around this,
pending qdev-ification of DBDMA, by moving the call to realize.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-4-git-send-email-armbru@redhat.com>
This causes the region to outlive the object, because it attaches the
region to /machine. This is not nice for the "realize" method, but
much worse for "instance_init" because it can cause dangling pointers
after a simple object_new/object_unref pair.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The code to flush the DBDMA channel was effectively duplicated in
dbdma_control_write(), except for the fact that the copy executed outside of a
RUN bit transition was broken by not clearing the FLUSH bit once the flush was
complete.
Newer PPC Linux kernels would timeout waiting for the FLUSH bit to clear again
after submitting a FLUSH command. Fix this by always clearing the FLUSH bit
once the channel flush is complete and removing the repeated code.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current macio implementation declares an interrupt that doesn't appear to
exist in the hardware or any other emulator implementation. OpenBIOS detects
this interrupt and generates an 'interrupts' property in the macio device tree
entry. Mac OS 9 halts boot when it detects this interrupt, so it has been
removed to permit further progress in the boot process.
Signed-off-by: Cormac O'Brien <i.am.cormac.obrien@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
+0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
=tju/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Few devices have their specialized 'config_write' methods which simply
call 'pci_default_write_config' followed by a 'msix_write_config' or
'msi_write_config' calls, using exact same arguments.
This is unnecessary as 'pci_default_write_config' already invokes
'msi_write_config' and 'msix_write_config'.
Also, since 'pci_default_write_config' is the default 'config_write'
handler, we can simply avoid the registration of these specialized
versions.
Cc: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert device models "macio-oldworld" and "macio-newworld".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These were being incorrectly declared as MISC_SIZE (1 byte) rather than
4 bytes and 2 bytes respectively. As a result accesses clamped to the
real register size would unexpectedly fail.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1427987370-15897-1-git-send-email-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).
This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
man gcc:
Warn if in a loop with constant number of iterations the compiler
detects undefined behavior in some statement during one or more of
the iterations.
Milkymist pfpu has no jump instructions, so checking for MICROCODE_WORDS
instructions should have kept us in bounds of s->microcode, but i++
allowed one loop too many,
hw/misc/milkymist-pfpu.c: In function ‘pfpu_write’:
hw/misc/milkymist-pfpu.c:365:20: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
if (i++ >= MICROCODE_WORDS) {
^
hw/misc/milkymist-pfpu.c:167:14: note: possible undefined statement is here
uint32_t insn = s->microcode[pc];
^
The code can still access out of bounds, because it presumes that PC register
always begins at 0, and we allow writing to it.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If ret = macio_initfn_ide() is less than 0, the timer_memory
will leak the memory it points to.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Make sure that we include the adb_poll_timer when saving the VM state for
client OSs that use it, e.g. Darwin.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
This ensures that the macio PCI device is correctly configured when restoring
from a VM snapshot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the ivshmem device is built whenever both PCI and KVM support are
included. This patch gives it its own config option to allow easier
customization of whether to include it. It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is done in preparation for the addition of VFIO platform
device support.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Depending on the device, container->space->as contains the valid AddressSpace.
Using address_space_memory breaks devices sitting behind an iommu (and using
a separate address space).
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch removes all DPRINTF and replace them by trace points.
A few DPRINTF used in error cases were transformed into error_report.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the kvm_resamplefds_enabled function
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace all the fprintf(stderr, ...) calls with error_report.
Also make sure exit() consistently uses the error code 1. A few calls
used -1. While at it cleanup some indentation in the printf argument
lists.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix OOB access via malformed incoming_posn parameters
and check that requested memory is actually alloc'ed.
Signed-off-by: Sebastian Krahmer <krahmer@suse.de>
[AF: Rebased, cleanups, avoid fd leak]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check incoming_posn to avoid out-of-bounds array accesses if the ivshmem
server on the host sends invalid values.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Tighten upper bound check for posn in close_guest_eventfds()]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The third argument to the fd_read() callback implemented by
ivshmem_read() is the number of bytes, not a flags field. Fix this and
check we received enough bytes before accessing the buffer pointer.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Handle partial reads via FIFO]
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCI MMIO might be disabled or the device in the reset state.
Make sure we do not dump these memory regions.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This looks like an old merge error and should have no effect.
(Build tested only)
Found by Coccinelle using Julia Lawall's script:
https://lkml.org/lkml/2014/8/23/128
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1414055855-6688-1-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On this way, we can assure the new bootindex take effect
during vm rebooting.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All memory regions used by VFIO are LITTLE_ENDIAN and they
already take care of endiannes when accessing real device BARs
except ROM - it was broken on BE hosts.
This fixes endiannes for ROM BARs the same way as it is done
for other BARs.
This has been tested on PPC64 BE/LE host/guest in all possible
combinations including TCG.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[aik: added commit log]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reverts commit c40708176a.
The resulting code wrongly assumed target and host endianness are
the same which is not always the case for PPC64.
[aw: or potentially any host supporting VFIO and TCG]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Mac OS X calibrates a number of frequencies on bootup based on reading
tb values on bootup and comparing them to via cuda timer values.
The only variable we can really steer well (thanks to KVM) is the cuda
frequency. So let's use that one to fake Mac OS X into believing the
bus frequency is tbfreq * 4. That way Mac OS X will automatically
calculate the correct timebase frequency.
With this patch and the patch set I posted earlier I can successfully
run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is a special timer in the mac99 machine that we recently started
to emulate. Unfortunately we emulated it in the wrong frequency.
This patch adapts the frequency Mac OS X uses to evaluate results from
this timer, making calculations it bases off of it work.
Signed-off-by: Alexander Graf <agraf@suse.de>
If we make use of OVMF for the BIOS then we can use GPUs without VGA
space access, but we still need this quirk. Disassociate it from the
x-vga option and enable it on all NVIDIA VGA display class devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly call object_unparent in the few places where we
will re-create the memory region. If the memory region is
simply being destroyed as part of device teardown, let QOM
handle it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function fstat() may fail, so check its return value.
Acked-by: Levente Kurusa <lkurusa@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ivsmem_offset was removed, however this debug statement was not updated.
Modify the statement to fit the new mechanic.
Signed-off-by: Levente Kurusa <lkurusa@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 40509f7f added a test to avoid updating KVM MSI routes when the
MSIMessage is unchanged and f4d45d47 switched to relying on this
rather than doing our own comparison. Our cached msg is effectively
unused now. Remove it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When new MSI-X vectors are enabled we need to disable MSI-X and
re-enable it with the correct number of vectors. That means we need
to reprogram the eventfd triggers for each vector. Prior to f4d45d47
vector->use tracked whether a vector was masked or unmasked and we
could always pick the KVM path when available for unmasked vectors.
Now vfio doesn't track mask state itself and vector->use and virq
remains configured even for masked vectors. Therefore we need to ask
the MSI-X code whether a vector is masked in order to select the
correct signaling path. As noted in the comment, MSI relies on
hardware to handle masking.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org # QEMU 2.1
The VMStateDescription for the imx_ccm device was missing its
terminator. Found by static search of the codebase using
a regex based on one suggested by Ian Jackson:
pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]')
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
The permission of TCE entry should exclude physical base address.
Otherwise, unmapping TCE entry can be interpreted to mapping TCE
entry wrongly for VFIO devices.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
io-error is for block device errors; it should always be preceded
by a BLOCK_IO_ERROR event. I think vfio wants to use
RUN_STATE_INTERNAL_ERROR instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Slow BAR access path is used when VFIO fails to mmap() BAR.
Since this is just a transport between the guest and a device, there is
no need to do endianness swapping.
This changes BARs to use native endianness. Since non-ROM BARs were
doing byte swapping, we need to remove it so does the patch.
As the result, this eliminates cancelling byte swaps and there is
no change in behavior for non-ROM BARs.
ROM BARs were declared little endian too but byte swapping was not
implemented for them so they never actually worked on big endian systems
as there was no cancelling byte swap. This fixes endiannes for ROM BARs
by declaring them native endian and only fixing access sizes as it is
done for non-ROM BARs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are still old guests out there that over-exercise MSI-X masking.
The current code completely sets-up and tears-down an MSI-X vector on
the "use" and "release" callbacks. While this is functional, it can
slow an old guest to a crawl. We can easily skip the KVM parts of
this so that we keep the MSI route and irqfd setup. We do however
need to switch VFIO to trigger a different eventfd while masked.
Actually, we have the option of continuing to use -1 to disable the
trigger, but by using another EventNotifier we can allow the MSI-X
core to emulate pending bits and re-fire the vector once unmasked.
MSI code gets updated as well to use the same setup and teardown
structures and functions.
Prior to this change, an igbvf assigned to a RHEL5 guest gets about
20Mbps and 50 transactions/s with netperf (remote or VF->PF). With
this change, we get line rate and 3k transactions/s remote or 2Gbps
and 6k+ transactions/s to the PF. No significant change is expected
for newer guests with more well behaved MSI-X support.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This turns the sPAPR support on and enables VFIO container use
in the kernel.
This extends vfio_connect_container to support VFIO_SPAPR_TCE_IOMMU type
in the host kernel.
This registers a memory listener which sPAPR IOMMU will notify when
executing H_PUT_TCE/etc DMA calls. The listener then will notify the host
kernel about DMA map/unmap operation via VFIO_IOMMU_MAP_DMA/
VFIO_IOMMU_UNMAP_DMA ioctls.
This executes VFIO_IOMMU_ENABLE ioctl to make sure that the IOMMU is free
of mappings and can be exclusively given to the user. At the moment SPAPR
is the only platform requiring this call to be implemented.
Note that the host kernel function implementing VFIO_IOMMU_DISABLE
is called automatically when container's fd is closed so there is
no need to call it explicitly from QEMU. We may need to call
VFIO_IOMMU_DISABLE explicitly in the future for some sort of dynamic
reconfiguration (PCI hotplug or dynamic IOMMU group management).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
While most operations with VFIO IOMMU driver are generic and used inside
vfio.c, there are still some operations which only specific VFIO IOMMU
drivers implement. The first example of it will be reading a DMA window
start from the host.
This adds a helper which passes an ioctl request to the container's fd.
The helper will check if @req is known. For this, stub is added. This return
-1 on any requests for now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The timer registers on our KeyLargo macio emulation are read as byte reversed
from the big endian guest, so we better expose them endian reversed as well.
This fixes initial hickups of booting Mac OS X with -M mac99 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.
However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.
Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.
This fixes booting Mac OS X for me.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch uses the new IOMMU notifiers to allow VFIO pass through devices
to work with guest side IOMMUs, as long as the host-side VFIO iommu has
sufficient capability and granularity to match the guest side. This works
by tracking all map and unmap operations on the guest IOMMU using the
notifiers, and mirroring them into VFIO.
There are a number of FIXMEs, and the scheme involves rather more notifier
structures than I'd like, but it should make for a reasonable proof of
concept.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
So far, VFIO has a notion of different logical DMA address spaces, but
only ever uses one (system memory). This patch extends this, creating
new VFIOAddressSpace objects as necessary, according to the AddressSpace
reported by the PCI subsystem for this device's DMAs.
This isn't enough yet to support guest side IOMMUs with VFIO, but it does
mean we could now support VFIO devices on, for example, a guest side PCI
host bridge which maps system memory at somewhere other than 0 in PCI
space.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The only model so far supported for VFIO passthrough devices is the model
usually used on x86, where all of the guest's RAM is mapped into the
(host) IOMMU and there is no IOMMU visible in the guest.
This patch begins to relax this model, introducing the notion of a
VFIOAddressSpace. This represents a logical DMA address space which will
be visible to one or more VFIO devices by appropriate mapping in the (host)
IOMMU. Thus the currently global list of containers becomes local to
a VFIOAddressSpace, and we verify that we don't attempt to add a VFIO
group to multiple address spaces.
For now, only one VFIOAddressSpace is created and used, corresponding to
main system memory, that will change in future patches.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reworks vfio_connect_container() and vfio_get_group() to have
common exit path at the end of the function bodies.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Upcoming VFIO on SPAPR PPC64 support will initialize the IOMMU
memory region with UINT64_MAX (2^64 bytes) size so int128_get64()
will assert.
The patch takes care of this check. The existing type1 IOMMU code
is not expected to map all 64 bits of RAM so the patch does not
touch that part.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This device is ridiculous. It has two MMIO BARs, BAR4 and BAR2. BAR4
hosts the MSI-X table, so oviously it would be too easy to access it
directly, instead it creates a window register in BAR2 that, among
other things, provides access to the MSI-X table. This means MSI-X
doesn't work in the guest because the driver actually manages to
program the physical table. When interrupt remapping is present, the
device MSI will be blocked. The Linux driver doesn't make use of this
window, so apparently it's not required to make use of MSI-X. This
quirk makes the device work with the Windows driver that does use this
window for MSI-X, but I certainly cannot recommend this device for
assignment (the Windows 7 driver also constantly pokes PCI config
space).
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gg8m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140515' into staging
migration/next for 20140515
# gpg: Signature made Thu 15 May 2014 02:32:25 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140515:
usb: fix up post load checks
migration: show average throughput when migration finishes
savevm: Remove all the unneeded version_minimum_id_old (rest)
savevm: Remove all the unneeded version_minimum_id_old (usb)
Split ram_save_block
arch_init: Simplify code for load_xbzrle()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
In fill_prefetch_fifo(), if the device we are reading from is 16 bit,
then we must not try to transfer an odd number of bytes into the FIFO.
This could otherwise have resulted in our overrunning the prefetch.fifo
array by one byte.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the ObjectProperty set() methods are
merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Change the DB_PRINT macro over to a regular if() rather than
conditional compilation to give constant compile testing of formats.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 942477847353c5cff5f45a228cc88c633dc012f3.1396503037.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Near total rewrite of this device model. It is stylistically
obsolete, has numerous coverity fails and is not up to date with latest
Xilinx documentation. Fix.
The registers are flattened into a single array. This greatly simplifies
the MMIO accessor functions.
We take the oppurtunity to update the register Macro definitions to
match the latest TRM. Xilinx has de-documented some regs hence there are
some straight deletions. We only do this however in the case or a stock
read-as-written reset-zero register. Non-zero resets are always
preserved. New register definitions are added as needed.
This all comes with a VMSD version break as the union layout from before
was a bit strange and we are better off without it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3aa016167b352ed224666909217137285fd3351d.1396503037.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now, the temperature property must be written in milli-celsius,
but it reads back the value in 8.8 fixed point. Fix this by letting the
property read back the original value (possibly rounded). Also simplify
the code that does the conversion.
Before:
(QEMU) qom-set path=/machine/peripheral/sensor property=temperature value=20000
{u'return': {}}
(QEMU) qom-get path=sensor property=temperature
{u'return': 5120}
After:
(QEMU) qom-set path=/machine/peripheral/sensor property=temperature value=20000
{u'return': {}}
(QEMU) qom-get path=sensor property=temperature
{u'return': 20000}
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Remove terminating newlines from hw_error() and error_report() calls
* Fix cut-n-paste error in text (s/to/from/)
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
commit e638073c56 added a flag to track whether
a previous rom read had failed. Accidentally, the code
ended up adding vfio_load_option_rom twice. (Thanks to Alex
for spotting it)
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define and use QOM cast macro. Removes some usages of legacy casting
systems.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Rename parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Create an abstract class that encompasses both max111x variants. This is
needed for QOM cast macro creation (and is the right thing to do
anyway). Macroify type-names in the process.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Introduce local DeviceState variable for transition to QOM realize]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Certain cards such as the Broadcom BCM57810 have rom quirks
that exhibit unstable system behavior duing device assignment. In
the particular case of 57810, rom execution hangs and if a FLR
follows, the device becomes inoperable until a power cycle. This
change blacklists loading of rom for such cards unless the user
specifies a romfile or rombar=1 on the cmd line
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
readlink() returns the number of bytes written to the buffer, and it
doesn't write a terminating null byte. vfio_init() writes it itself.
Overruns the buffer when readlink() filled it completely.
Fix by treating readlink() filling the buffer completely as error,
like we do in pci-assign.c's assign_failed_examine().
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix incorrect use of sizeof() rather than ARRAY_SIZE() to guard
accesses into the mb_clock[] array, which was allowing a malicious
guest to overwrite the end of the array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* more A64 Neon instructions
* AArch32 VCVTB and VCVTT ARMv8 instructions
* fixes to inaccuracies in GIC emulation
* libvixl disassembler for A64
* Allwinner SoC ethernet controller
* zynq software system reset support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABCAAGBQJS9lLhAAoJEDwlJe0UNgzewoEP/1ilCOwrepJ4zkIfhzoFpyu6
OtS/H6ORzE/pAr3r890CPEMPCgQZ4Fw5BdUloo/BtIC/fETEPaxAxIdDFvvVwSo6
atX/RSHdSHbJwcwzJ2YW3sHFeZrHX2V0Qzx/bKPu20qcFE39eG4+b3tJfoSURClE
o3Jis32j5MLTGphp9ulhfOVVt14ToTqk6M2mDpBVkK2XofKD3ytYMG6els2n04D4
6JTdXDRN53+MfF9B5VoQGlc90OsIQHYycnEMjVGSr1Clxd3AHNYaMNZ+kSLbILZi
uYE3s6xwQHBh5L3NuQU6zIrx7MBtA2flNA2BiQiabJaN76qkvZHlkxTIm9D0UlRC
xVbSEp3pwu/KZGCtZobcK/dkrJOsGxOJeswDxEQy/MJUneSMnpDRuOwKO/zG7pW5
nXV+fUAVH+xR9PZUvLzpZAxSFLH4A5kR7ezQkl8SLX6+zTN6bH1e7If/Z0c0WffH
XNvEarVCbKkbBh/8FOvhJoYuz902ZFnaje1pi26dmxpd7fyswlHkR3ewLYJLlOXq
26lG/aVqMJ+JqzvzL0PpWX9+Am43sVkRhNiedT7RWyu20eCGWjwVvl0TISw7gFge
0yRUhdMQtcdVhREqUScxDyGQrtN0+5U77yIRs+SVH3hjDu6riTbeHQ4uJakJssVn
03Fs0aFWNIv9g7cGhg8C
=6kX6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140208' into staging
target-arm queue:
* more A64 Neon instructions
* AArch32 VCVTB and VCVTT ARMv8 instructions
* fixes to inaccuracies in GIC emulation
* libvixl disassembler for A64
* Allwinner SoC ethernet controller
* zynq software system reset support
# gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits)
arm/zynq: Add software system reset via SCLR
hw/arm/allwinner-a10: initialize EMAC
hw/net: add support for Allwinner EMAC Fast Ethernet controller
util/fifo8: clear fifo head upon reset
util/fifo8: implement push/pop of multiple bytes
disas: Implement disassembly output for A64
disas/libvixl: Fix upstream libvixl compilation issues
disas: Add subset of libvixl sources for A64 disassembler
rules.mak: Link with C++ if we have a C++ compiler
rules.mak: Support .cc as a C++ source file suffix
arm_gic: Add GICC_APRn state to the GICState
vmstate: Add uint32 2D-array support
arm_gic: Support setting/getting binary point reg
arm_gic: Keep track of SGI sources
arm_gic: Fix GIC pending behavior
target-arm: Add support for AArch32 64bit VCVTB and VCVTT
target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group
target-arm: A64: Add 2-reg-misc REV* instructions
target-arm: A64: Add narrowing 2-reg-misc instructions
target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support software-driven system reset via the register in the SCLR.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change to DEBUG_VFIO in vfio_msi_interrupt() for debug
messages to get printed
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO virtualizes MSIX table for the guest but not mapping the part of
a BAR which contains an MSIX table. Since vfio_mmap_bar() mmaps chunks
before and after the MSIX table, they have to be aligned to the host
page size which may be TARGET_PAGE_MASK (4K) or 64K in case of PPC64.
This fixes boundaries calculations to use the real host page size.
Without the patch, the chunk before MSIX table may overlap with the MSIX
table and mmap will fail in the host kernel. The result will be serious
slowdown as the whole BAR will be emulated by QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio-pci initfn will currently succeed even if DMA mappings fail.
A typical reason for failure is if the user does not have sufficient
privilege to lock all the memory for the guest. In this case, the
device gets attached, but can only access a portion of guest memory
and is extremely unlikely to work.
DMA mappings are done via a MemoryListener, which provides no direct
error return path. We therefore stuff the errno into our container
structure and check for error after registration completes. We can
also test for mapping errors during runtime, but our only option for
resolution at that point is to kill the guest with a hw_error.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since 57271d63 we now see spurious mappings with the upper bits set
if 64bit PCI BARs are sized while enabled. The guest writes a mask
of 0xffffffff to the lower BAR to size it, then restores it, then
writes the same mask to the upper BAR resulting in a spurious BAR
mapping into the last 4G of the 64bit address space. Most
architectures do not support or make use of the full 64bits address
space for PCI BARs, so we filter out mappings with the high bit set.
Long term, we probably need to think about vfio telling us the
address width limitations of the IOMMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
During lazy rom loading, if rom read fails, and the
guest attempts a read again, vfio will again attempt it.
Add a boolean to prevent this. There could be a case where
a failed rom read might succeed the next time because of
a device reset or such, but it's best to exclude unpredictable
behavior
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the device rom can't be read, report an error to the
user. This alerts the user that the device has a bad
state that is causing rom read failure or option rom
loading has been disabled from the device boot menu
(among other reasons).
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Somehow this has been lurking for a while; we remove our subregions
from the base BAR and VGA region mappings, but we don't destroy them,
creating a leak and more serious problems when we try to migrate after
removing these devices. Add the trivial bit of final cleanup to
remove these entirely.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WrhM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
This improves readability and simplifies the code.
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
