Call VFIO_IOMMU_DIRTY_PAGES ioctl to start and stop dirty pages tracking
for VFIO devices.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added helper functions to get IOMMU info capability chain.
Added function to get migration capability information from that
capability chain for IOMMU container.
Similar change was proposed earlier:
https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg03759.html
Disable migration for devices if IOMMU module doesn't support migration
capability.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mr->ram_block is NULL when mr->is_iommu is true, then fr.dirty_log_mask
wasn't set correctly due to which memory listener's log_sync doesn't
get called.
This patch returns log_mask with DIRTY_MEMORY_MIGRATION set when
IOMMU is enabled.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Sequence during _RESUMING device state:
While data for this device is available, repeat below steps:
a. read data_offset from where user application should write data.
b. write data of data_size to migration region from data_offset.
c. write data_size which indicates vendor driver that data is written in
staging buffer.
For user, data is opaque. User should write data in the same order as
received.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added .save_live_pending, .save_live_iterate and .save_live_complete_precopy
functions. These functions handles pre-copy and stop-and-copy phase.
In _SAVING|_RUNNING device state or pre-copy phase:
- read pending_bytes. If pending_bytes > 0, go through below steps.
- read data_offset - indicates kernel driver to write data to staging
buffer.
- read data_size - amount of data in bytes written by vendor driver in
migration region.
- read data_size bytes of data from data_offset in the migration region.
- Write data packet to file stream as below:
{VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data,
VFIO_MIG_FLAG_END_OF_STATE }
In _SAVING device state or stop-and-copy phase
a. read config space of device and save to migration file stream. This
doesn't need to be from vendor driver. Any other special config state
from driver can be saved as data in following iteration.
b. read pending_bytes. If pending_bytes > 0, go through below steps.
c. read data_offset - indicates kernel driver to write data to staging
buffer.
d. read data_size - amount of data in bytes written by vendor driver in
migration region.
e. read data_size bytes of data from data_offset in the migration region.
f. Write data packet as below:
{VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data}
g. iterate through steps b to f while (pending_bytes > 0)
h. Write {VFIO_MIG_FLAG_END_OF_STATE}
When data region is mapped, its user's responsibility to read data from
data_offset of data_size before moving to next steps.
Added fix suggested by Artem Polyakov to reset pending_bytes in
vfio_save_iterate().
Added fix suggested by Zhi Wang to add 0 as data size in migration stream and
add END_OF_STATE delimiter to indicate phase complete.
Suggested-by: Artem Polyakov <artemp@nvidia.com>
Suggested-by: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define flags to be used as delimiter in migration stream for VFIO devices.
Added .save_setup and .save_cleanup functions. Map & unmap migration
region from these functions at source during saving or pre-copy phase.
Set VFIO device state depending on VM's state. During live migration, VM is
running when .save_setup is called, _SAVING | _RUNNING state is set for VFIO
device. During save-restore, VM is paused, _SAVING state is set for VFIO device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added migration state change notifier to get notification on migration state
change. These states are translated to VFIO device state and conveyed to
vendor driver.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VM state change handler is called on change in VM's state. Based on
VM state, VFIO device state should be changed.
Added read/write helper functions for migration region.
Added function to set device_state.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: lx -> HWADDR_PRIx, remove redundant parens]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Whether the VFIO device supports migration or not is decided based of
migration region query. If migration region query is successful and migration
region initialization is successful then migration is supported else
migration is blocked.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added functions to save and restore PCI device specific data,
specifically config space of PCI device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This function will be used for migration region.
Migration region is mmaped when migration starts and will be unmapped when
migration is complete.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This test case uses a Tunlinkat request to remove a previously hard
linked file by using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <9bec33a7d8f006ef8f80517985d0d6ac48650d53.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlink request to create a hard link to a regular
file using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <f0d869770ad23ee5ce10f7da90fdb742cadcad72.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a symlink using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a23cd4d2ab6d8d3048addab8cbf0416fe5ead43e.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tsymlink 9p request to create a symbolic link using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <84ac76937855bf441242372cc3e62df42f0a3dc4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a regular file using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4eabeed7f662721dd5664cb77fe36ea0aa08b1ec.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlcreate 9p request to create a regular file inside
host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <269cae0c00af941a3a4ae78f1e319f93462a7eb4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat 9p request with flag AT_REMOVEDIR
(see 'man 2 unlink') to remove a directory from host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3c7c65b476ba44bea6afd0b378b5287e1c671a32.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Split out walking a directory path to a separate new utility function
do_walk() and use that function in do_mkdir().
The code difference saved this way is not much, but we'll use that new
do_walk() function in the upcoming patches, so it will avoid quite
some code duplication after all.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4d7275b2363f122438a443ce079cbb355285e9d6.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_mkdir() isn't a top level test function and thus shouldn't take
the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321018148.266767.15959608711038504029.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_readdir_split() isn't a top level test function and thus shouldn't
take the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016084.266767.9501523425012383531.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_attach() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321017450.266767.17377192504263871186.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_create_dir() is a top level test function. It should set alloc.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016764.266767.3763279057643874020.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_version() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321015403.266767.4533967728943968456.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
No need to get a complaint from "rm" if some path disappeared for some
reason.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160406199444.312256.8319835906008559151.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Coverity wants the return value of mkdir() to be checked:
/qemu/tests/qtest/libqos/virtio-9p.c: 48 in create_local_test_dir()
42 /* Creates the directory for the 9pfs 'local' filesystem driver to
access. */
43 static void create_local_test_dir(void)
44 {
45 struct stat st;
46
47 g_assert(local_test_path != NULL);
>>> CID 1435963: Error handling issues (CHECKED_RETURN)
>>> Calling "mkdir(local_test_path, 511U)" without checking return value.
This library function may fail and return an error code.
48 mkdir(local_test_path, 0777);
49
50 /* ensure test directory exists now ... */
51 g_assert(stat(local_test_path, &st) == 0);
52 /* ... and is actually a directory */
53 g_assert((st.st_mode & S_IFMT) == S_IFDIR);
So let's just do that and log an info-level message at least, because we
actually only care if the required directory exists and we do have an
existence check for that in place already.
Reported-by: Coverity (CID 1435963)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <03f68c7ec08064e20f43797f4eb4305ad21e1e8e.1604061839.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Use mkdtemp() to generate a unique directory for the 9p 'local' tests.
This fixes occasional 9p test failures when running 'make check -jN' if
QEMU was compiled for multiple target architectures, because the individual
architecture's test suites would run in parallel and interfere with each
other's data as the test directory was previously hard coded and hence the
same directory was used by all of them simultaniously.
This also requires a change how the test directory is created and deleted:
As the test path is now randomized and virtio_9p_register_nodes() being
called in a somewhat undeterministic way, that's no longer an appropriate
place to create and remove the test directory. Use a constructor and
destructor function for creating and removing the test directory instead.
Unfortunately libqos currently does not support setup/teardown callbacks
to handle this more cleanly.
The constructor functions needs to be in virtio-9p-test.c, not in
virtio-9p.c, because in the latter location it would cause all apps that
link to libqos (i.e. entirely unrelated test suites) to create a 9pfs
test directory as well, which would even break other test suites.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Message-Id: <7746f42d8f557593898d3d9d8e57c46e872dfb4f.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Make functions create_local_test_dir() and remove_local_test_dir()
public. They're going to be used in the next patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <ec90703cbc23d6b612b3672f946d7741f4a16080.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Just a bunch of bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+cCq8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpKWkH/0qq+u2z/q0KYzmodcdW2eFNsvKF2e+Dz3Af
zZGMREH93DsKAQ2k3t84sz2RAaAP45cCqrq+v8kSzmpaC7GqKYA/VceeLwy8e6Eu
YKvu5QixrOVTpNg2QV/w44ywgtA4NbWy5Fr9S4qhzPyyD/gtE609weZ1vQnSFT7B
Gg4vr1lcqskwYTH7sh+bpsDTUeANr7QaknWKnaomroz+IUO8m9ig6RKtegaXhQCj
xswI4458S3nklqnoGMa56j46VYwft8YHO1lBiR1WefTHylknyng9Tdvf9G5mnzVg
wyrMTuT36lMXIa5KcSZeECIt2ZUT6KSSjWzEKZNXL5lS3gfUo7o=
=powp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: misc fixes
Just a bunch of bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 30 Oct 2020 12:44:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
intel_iommu: Fix two misuse of "0x%u" prints
virtio: skip guest index check on device load
vhost-blk: set features before setting inflight feature
pci: Disallow improper BAR registration for type 1
pci: Change error_report to assert(3)
pci: advertise a page aligned ATS
pc: Implement -no-hpet as sugar for -machine hpet=on
vhost: Don't special case vq->used_phys in vhost_get_log_size()
pci: Assert irqnum is between 0 and bus->nirqs in pci_bus_change_irq_level
hw/pci: Extract pci_bus_change_irq_level() from pci_change_irq_level()
hw/virtio/vhost-vdpa: Fix Coverity CID 1432864
acpi/crs: Support ranges > 32b for hosts
acpi/crs: Prevent bad ranges for host bridges
vhost-vsock: set vhostfd to non-blocking mode
vhost-vdpa: negotiate VIRTIO_NET_F_STATUS with driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
'qemu-img map' provides a way to determine which extents of an image
come from the top layer vs. inherited from a backing chain. This is
useful information worth exposing over NBD. There is a proposal to
add a QMP command block-dirty-bitmap-populate which can create a dirty
bitmap that reflects allocation information, at which point the
qemu:dirty-bitmap:NAME metadata context can expose that information
via the creation of a temporary bitmap, but we can shorten the effort
by adding a new qemu:allocation-depth metadata context that does the
same thing without an intermediate bitmap (this patch does not
eliminate the need for that proposal, as it will have other uses as
well).
While documenting things, remember that although the NBD protocol has
NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to
'metadata context', which is a more apt description of what is
actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting
metadata by passing one or more context names. So I also touched up
some existing wording to prefer the term 'metadata context' where it
makes sense.
Note that this patch does not actually enable any way to request a
server to enable this context; that will come in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-10-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When checking for allocation across a chain, it's already easy to
count the depth within the chain at which the allocation is found.
Instead of throwing that information away, return it to the caller.
Existing callers only cared about allocated/non-allocated, but having
a depth available will be used by NBD in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-9-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
With this, 'qemu-nbd -B b0 -B b1 -f qcow2 img.qcow2' can let you sniff
out multiple bitmaps from one server. qemu-img as client can still
only read one bitmap per client connection, but other NBD clients
(hello libnbd) can now read multiple bitmaps in a single pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201027050556.269064-8-eblake@redhat.com>
Rather than open-code the count of negotiated contexts at several
sites, embed it directly into the struct. This will make it easier
for upcoming commits to support even more simultaneous contexts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Each dirty bitmap already knows its name; by reducing the scope of the
places where we construct "qemu:dirty-bitmap:NAME" strings, tracking
the name is more localized, and there are fewer per-export fields to
worry about. This in turn will make it easier for an upcoming patch
to export more than one bitmap at once.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201027050556.269064-6-eblake@redhat.com>
Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.
Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than open-coding the translation from the deprecated
NbdServerAddOptions type to the preferred BlockExportOptionsNbd, it's
better to utilize QAPI_CLONE_MEMBERS. This solves a couple of issues:
first, if we do any more refactoring of the base type (which an
upcoming patch plans to do), we don't have to revisit the open-coding.
Second, our assignment to arg->name is fishy: the generated QAPI code
for qapi_free_NbdServerAddOptions does not visit arg->name if
arg->has_name is false, but if it DID visit it, we would have
introduced a double-free situation when arg is finally freed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201027050556.269064-4-eblake@redhat.com>
block.c has a useful macro QAPI_LIST_ADD() for inserting at the front
of any QAPI-generated list; move it from block.c to qapi/util.h so
more places can use it, including one earlier place in block.c, and
rename it to something more obvious (since we also have a lot of
places that append, rather than prepend, to a list).
There are many more places in the codebase that can benefit from using
the macro, but converting them will be left to later patches.
In theory, all QAPI list types are child classes of GenericList; but
in practice, that relationship is not explicitly spelled out in the C
type declarations (rather, it is something that happens implicitly due
to C compatible layouts), and the macro does not actually depend on
the GenericList type. We considered moving GenericList from visitor.h
into util.h to group related code; however, such a move would be
awkward if we do not also move GenericAlternate. Unfortunately,
moving GenericAlternate would introduce its own problems of
declaration circularity (qapi-builtin-types.h needs a complete
definition of QEnumLookup from util.h, but GenericAlternate needs a
complete definition of QType from qapi-builtin-types.h).
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201027050556.269064-3-eblake@redhat.com>
[eblake: s/ADD/PREPEND/ per suggestion by Markus]
There is no need to rely on the verbosity of the gcc/clang compiler
extension of g_new(typeof(X), 1) when we can instead use the standard
g_malloc(sizeof(X)). In general, we like g_new over g_malloc for
returning type X rather than void* to let the compiler catch more
potential typing mistakes, but in this particular macro, our other use
of typeof on the same line already ensures we are getting correct
results.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
nbd_server_start_unix_socket() includes an implicit nbd_server_stop(),
but we still need an explicit one at the end of the test (where there
follows no next nbd_server_start_unix_socket()), or qemu-nbd will linger
until the test exits.
This will become important when enabling this test to run on FUSE
exports, because then the export (which is the image used by qemu-nbd)
will go away before qemu-nbd exits, which will lead to qemu-nbd
complaining that it cannot flush the bitmaps in the image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027164416.144115-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We need to let _img_info emit the format-specific information so we get
the list of bitmaps we want, but we do not need anything but the
bitmaps. So filter out everything that is irrelevant to us. (Ideally,
this would be a generalized function in common.filters that takes a list
of things to keep, but that would require implementing an anti-bitmap
filter, which would be hard, and which we do not need here. So that is
why this function is just a local hack.)
This lets 291 pass with qcow2 options like refcount_bits or data_file
again.
Fixes: 14f16bf947
("qemu-img: Support bitmap --merge into backing image")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027164416.144115-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
-----BEGIN PGP SIGNATURE-----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=ON5g
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
# gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: End quiescent sections when a BDS is deleted
qcow2: Skip copy-on-write when allocating a zero cluster
qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status()
qemu-img: add support for rate limit in qemu-img convert
qemu-img: add support for rate limit in qemu-img commit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
