Before using softmmu page tables for the ptw, plumb down
a debug parameter so that we can query page table entries
from gdbstub without modifying cpu state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Consolidate most of the inputs and outputs of S1_ptw_translate
into a single structure. Plumb this through arm_ld*_ptw from
the controlling get_phys_addr_* routine.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compare only the VMID field when considering whether we need to flush.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had been marking this ARM_MMU_IDX_NOTLB, move it to a real tlb.
Flush the tlb when invalidating stage 1+2 translations. Re-use
alle1_tlbmask() for other instances of EL1&0 + Stage2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not yet used, but add mmu indexes for 1-1 mapping
to physical addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a field to TARGET_PAGE_ENTRY_EXTRA to hold the guarded bit.
In is_guarded_page, use probe_access_full instead of just guessing
that the tlb entry is still present. Also handles the FIXME about
executing from device memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUTLBEntryFull structure now stores the original pte attributes, as
well as the physical address. Therefore, we no longer need a separate
bit in MemTxAttrs, nor do we need to walk the tree of memory regions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy attrs and shareability, into the TLB. This will eventually
be used by S1_ptw_translate to report stage1 translation failures,
and by do_ats_write to fill in PAR_EL1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU doesn't model micro-architectural details which includes most
chip errata. The ARM_ERRATA_798181 work around in the Linux
kernel (see erratum_a15_798181_init) currently detects QEMU's
cortex-a15 as broken and triggers additional expensive TLB flushes as
a result.
Change the MIDR to report what the latest silicon would (r4p0). We
explicitly set the IMPDEF revidr bits to 0 because we don't need to
set anything other than the silicon revision to indicate these flushes
are not needed. This cuts about 5s from my Debian kernel boot with the
latest 6.0rc1 kernel (29s->24s).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-id: 20221010153225.506394-1-alex.bennee@linaro.org
Cc: Arnd Bergmann <arnd@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-Id: <20220906172257.2776521-1-alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PL011 TRM says that "UARTIBRD = 0 is invalid and UARTFBRD is ignored
when this is the case". But the code looks at FBRD for the invalid case.
Fix this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Message-id: 1408f62a2e45665816527d4845ffde650957d5ab.1665051588.git.baruchs-c@neureality.ai
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This queue contains improvements in the e500 and ppc4xx boards, changes
in the maintainership of the project, a new QMP/HMP command and bug
fixes:
- Cedric is stepping back from qemu-ppc maintainership;
- ppc4xx_sdram: QOMification and clean ups;
- e500: add new types of flash and clean ups;
- QMP/HMP: introduce dumpdtb command;
- spapr_pci, booke doorbell interrupt and xvcmp* bit fixes;
The 'dumpdtb' implementation is also making changes to RISC-V files that
were acked by Alistair Francis and are being included in this queue.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY02qEgAKCRA82cqW3gMx
ZIadAQCYY9f+NFrSJBm3z4JjUaP+GmbgEjibjZW05diyKwbqzQEAjE1KXFCcd40D
3Brs2Dm4YruaJCwb68vswVQAYteXaQ8=
=hl94
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221017' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-10-18:
This queue contains improvements in the e500 and ppc4xx boards, changes
in the maintainership of the project, a new QMP/HMP command and bug
fixes:
- Cedric is stepping back from qemu-ppc maintainership;
- ppc4xx_sdram: QOMification and clean ups;
- e500: add new types of flash and clean ups;
- QMP/HMP: introduce dumpdtb command;
- spapr_pci, booke doorbell interrupt and xvcmp* bit fixes;
The 'dumpdtb' implementation is also making changes to RISC-V files that
were acked by Alistair Francis and are being included in this queue.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY02qEgAKCRA82cqW3gMx
# ZIadAQCYY9f+NFrSJBm3z4JjUaP+GmbgEjibjZW05diyKwbqzQEAjE1KXFCcd40D
# 3Brs2Dm4YruaJCwb68vswVQAYteXaQ8=
# =hl94
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Oct 2022 15:16:34 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221017' of https://gitlab.com/danielhb/qemu: (38 commits)
hw/riscv: set machine->fdt in spike_board_init()
hw/riscv: set machine->fdt in sifive_u_machine_init()
hw/ppc: set machine->fdt in spapr machine
hw/ppc: set machine->fdt in pnv_reset()
hw/ppc: set machine->fdt in pegasos2_machine_reset()
hw/ppc: set machine->fdt in xilinx_load_device_tree()
hw/ppc: set machine->fdt in sam460ex_load_device_tree()
hw/ppc: set machine->fdt in bamboo_load_device_tree()
hw/nios2: set machine->fdt in nios2_load_dtb()
qmp/hmp, device_tree.c: introduce dumpdtb
hw/ppc/spapr_pci.c: Use device_cold_reset() rather than device_legacy_reset()
target/ppc: Fix xvcmp* clearing FI bit
hw/ppc/e500: Remove if statement which is now always true
hw/ppc/mpc8544ds: Add platform bus
hw/ppc/mpc8544ds: Rename wrongly named method
hw/ppc/e500: Reduce usage of sysbus API
docs/system/ppc/ppce500: Add heading for networking chapter
hw/gpio/meson: Introduce dedicated config switch for hw/gpio/mpc8xxx
hw/ppc/meson: Allow e500 boards to be enabled separately
ppc440_uc.c: Remove unneeded parenthesis
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With all SSE (and AVX!) instructions now implemented in disas_insn_new,
it's possible to remove gen_sse, as well as the helpers for instructions
that now use gvec.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds another kind of weirdness when you thought you had seen it all:
an opcode byte that comes _after_ the address, not before. It's not
worth adding a new X86_SPECIAL_* constant for it, but it's actually
not unlike VCMP; so, forgive me for exploiting the similarity and just
deciding to dispatch to the right gen_helper_* call in a single code
generation function.
In fact, the old decoder had a bug where s->rip_offset should have
been set to 1 for 3DNow! instructions, and it's fixed now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extracted from a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include AVX, AVX2 and VAES in the guest cpuid features supported by TCG.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-40-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are exactly the same as the non-VEX version, but one has to be careful
that only VEX.L=0 is allowed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here the code is a bit uglier due to the truncation and extension
of registers to and from 32-bit. There is also a mistake in the
manual with respect to the size of the memory operand of CVTPS2PI
and CVTTPS2PI, reported by Ricky Zhou.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are mostly moves, and yet are a total pain. The main issue
is that:
1) some instructions are selected by mod==11 (register operand)
vs. mod=00/01/10 (memory operand)
2) stores to memory are two-operand operations, while the 3-register
and load-from-memory versions operate on the entire contents of the
destination; this makes it easier to separate the gen_* function for
the store case
3) it's inefficient to load into xmm_T0 only to move the value out
again, so the gen_* function for the load case is separated too
The manual also has various mistakes in the operands here, for example
the store case of MOVHPS operates on a 128-bit source (albeit discarding
the bottom 64 bits) and therefore should be Mq,Vdq rather than Mq,Vq.
Likewise for the destination and source of MOVHLPS.
VUNPCK?PS and VUNPCK?PD are the same as VUNPCK?DQ and VUNPCK?QDQ,
but encoded as prefixes rather than separate operands. The helpers
can be reused however.
For MOVSLDUP, MOVSHDUP and MOVDDUP I chose to reimplement them as
helpers. I named the helper for MOVDDUP "movdldup" in preparation
for possible future introduction of MOVDHDUP and to clarify the
similarity with MOVSLDUP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing special going on here, for once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several special cases here:
1) extending moves have different widths for the helpers vs. for the
memory loads, and the width for memory loads depends on VEX.L too.
This is represented by X86_SPECIAL_AVXExtMov.
2) some instructions, such as variable-width shifts, select the vector element
size via REX.W.
3) VSIB instructions (VGATHERxPy, VPGATHERxy) are also part of this group,
and they have (among other things) two output operands.
3) the macros for 4-operand blends (which are under 0x0f 0x3a) have to be
extended to support 2-operand blends. The 2-operand variant actually
came a few years earlier, but it is clearer to implement them in the
opposite order.
X86_TYPE_WM, introduced earlier for unaligned loads, is reused for helpers
that accept a Reg* but have a M argument.
These three-byte opcodes also include AVX new instructions, for which
the helpers were originally implemented by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As pmovmskb is used by strlen et al, this is the third
highest overhead sse operation at %0.8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Reorganize to generate code for any vector size. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The more complicated operations here are insertions and extractions.
Otherwise, there are just more entries than usual because the PS/PD/SS/SD
variations are encoded in the opcode rater than in the prefixes.
These three-byte opcodes also include AVX new instructions, whose
implementation in the helpers was originally done by Paul Brook
<paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Three-byte opcodes from the 0F3Ah area all have an immediate byte which
is usually unsigned. Clarify in the helper code that it is unsigned;
the new decoder treats immediates as signed by default, and seeing
an intN_t in the prototype might give the wrong impression that one
can use decode->immediate directly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The more complicated ones here are d6-d7, e6-e7, f7. The others
are trivial.
For LDDQU, using gen_load_sse directly might corrupt the register if
the second part of the load fails. Therefore, add a custom X86_TYPE_WM
value; like X86_TYPE_W it does call gen_load(), but it also rejects a
value of 11 in the ModRM field like X86_TYPE_M.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes shifts by immediate, which use bits 3-5 of the ModRM byte
as an opcode extension. With the exception of 128-bit shifts, they are
implemented using gvec.
This also covers VZEROALL and VZEROUPPER, which use the same opcode
as EMMS. If we were wanting to optimize out gen_clear_ymmh then this
would be one of the starting points. The implementation of the VZEROALL
and VZEROUPPER helpers is by Paul Brook.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are a mixed batch, including the first two horizontal
(66 and F2 only) operations, more moves, and SSE4a extract/insert.
Because SSE4a is pretty rare, I chose to leave the helper as they are,
but it is possible to unify them by loading index and length from the
source XMM register and generating deposit or extract TCG ops.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are mostly floating-point SSE operations. The odd ones out
are MOVMSK and CVTxx2yy, the others are straightforward.
Unary operations are a bit special in AVX because they have 2 operands
for PD/PS operands (VEX.vvvv must be 1111b), and 3 operands for SD/SS.
They are handled using X86_OP_GROUP3 for compactness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are more simple integer instructions present in both MMX and SSE/AVX,
with no holes that were later occupied by newer instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are both MMX and SSE/AVX instructions, except for vmovdqu. In both
cases the inputs and output is in s->ptr{0,1,2}, so the only difference
between MMX, SSE, and AVX is which helper to call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new implementation of SSE will cover AVX from the get go, because
all the work for the helper functions is already done. We just need to
build them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new implementation of SSE will cover AVX from the get go, so include
the 24 extra comparison operators that are only available with the VEX
prefix.
Based on a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to Paul's implementation, the new decoder will use a different approach
to implement AVX's merging of dst with src1 on scalar operations. Adjust the
old SSE decoder to be compatible with new-style helpers.
The affected instructions are CVTSx2Sx, ROUNDSx, RSQRTSx, SQRTSx, RCPSx.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to Paul's implementation, the new decoder will use a different approach
to implement AVX's merging of dst with src1 on scalar operations. Adjust the
helpers to provide this functionality.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add to the helpers all the operands that are needed to implement AVX.
Extracted from a patch by Paul Brook <paul@nowt.org>.
Message-Id: <20220424220204.2493824-26-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust all #ifdefs to match the ones in ops_sse.h.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-23-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because these are the only VEX instructions that QEMU supports, the
new decoder is entered on the first byte of a valid VEX prefix, and VEX
decoding only needs to be done in decode-new.c.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many SSE and AVX instructions are only valid with specific prefixes
(none, 66, F3, F2). Introduce a direct way to encode this in the
decoding table to avoid using decode groups too much.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new hflag bit to determine whether AVX instructions are allowed
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-4-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG will shortly implement VAES instructions, so add the relevant feature
word to the DisasContext.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add generic code generation that takes care of preparing operands
around calls to decode.e.gen in a table-driven manner, so that ALU
operations need not take care of that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new decoder is based on three principles:
- use mostly table-driven decoding, using tables derived as much as possible
from the Intel manual. Centralizing the decode the operands makes it
more homogeneous, for example all immediates are signed. All modrm
handling is in one function, and can be shared between SSE and ALU
instructions (including XMM<->GPR instructions). The SSE/AVX decoder
will also not have duplicated code between the 0F, 0F38 and 0F3A tables.
- keep the code as "non-branchy" as possible. Generally, the code for
the new decoder is more verbose, but the control flow is simpler.
Conditionals are not nested and have small bodies. All instruction
groups are resolved even before operands are decoded, and code
generation is separated as much as possible within small functions
that only handle one instruction each.
- keep address generation and (for ALU operands) memory loads and writeback
as much in common code as possible. All ALU operations for example
are implemented as T0=f(T0,T1). For non-ALU instructions,
read-modify-write memory operations are rare, but registers do not
have TCGv equivalents: therefore, the common logic sets up pointer
temporaries with the operands, while load and writeback are handled
by gvec or by helpers.
These principles make future code review and extensibility simpler, at
the cost of having a relatively large amount of code in the form of this
patch. Even EVEX should not be _too_ hard to implement (it's just a crazy
large amount of possibilities).
This patch introduces the main decoder flow, and integrates the old
decoder with the new one. The old decoder takes care of parsing
prefixes and then optionally drops to the new one. The changes to the
old decoder are minimal and allow it to be replaced incrementally with
the new one.
There is a debugging mechanism through a "LIMIT" environment variable.
In user-mode emulation, the variable is the number of instructions
decoded by the new decoder before permanently switching to the old one.
In system emulation, the variable is the highest opcode that is decoded
by the new decoder (this is less friendly, but it's the best that can
be done without requiring deterministic execution).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
REX.W can be used even in 32-bit mode by AVX instructions, where it is retroactively
renamed to VEX.W. Make the field available even in 32-bit mode but keep the REX_W()
macro as it was; this way, that the handling of dflag does not use it by mistake and
the AVX code more clearly points at the special VEX behavior of the bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ldq takes a pointer to the first byte to load the 64-bit word in;
ldo takes a pointer to the first byte of the ZMMReg. Make them
consistent, which will be useful in the new SSE decoder's
load/writeback routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used for emission and endian adjustments of gvec operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822223722.1697758-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than recurse directly on mmu_translate, go through the
same softmmu lookup that we did for the page table walk.
This centralizes all knowledge of MMU_NESTED_IDX, with respect
to setup of TranslationParams, to get_physical_address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-10-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use probe_access_full in order to resolve to a host address,
which then lets us use a host cmpxchg to update the pte.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/279
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
