Instructions in VEX exception class 6 generally look at the value of
VEX.W. Note that the manual places some instructions incorrectly in
class 4, for example VPERMQ which has no non-VEX encoding and no legacy
SSE analogue. AMD does a mess of its own, as documented in the comment
that this patch adds.
Most of them are checked for VEX.W=0, and are listed in the manual
(though with an omission) in table 2-16; VPERMQ and VPERMPD check for
VEX.W=1, which is only listed in the instruction description. Others,
such as VPSRLV, VPSLLV and the FMA3 instructions, use VEX.W to switch
between a 32-bit and 64-bit operation.
Fix more of the class 4/class 6 mismatches, and implement the check for
VEX.W in TCG.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for adding more similar checks, move the VEX.L=0 check
and several X86_SPECIAL_* checks to a new field, where each bit represent
a common check on unused bits, or a restriction on the processor mode.
Likewise, many SVM intercepts can be checked during the decoding phase,
the main exception being the selective CR0 write, MSR and IOIO intercepts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation was validated with OpenSSL and with the test vectors in
https://github.com/rust-lang/stdarch/blob/master/crates/core_arch/src/x86/sha.rs.
The instructions provide a ~25% improvement on hashing a 64 MiB file:
runtime goes down from 1.8 seconds to 1.4 seconds; instruction count on
the host goes down from 5.8 billion to 4.8 billion with slightly better
IPC too. Good job Intel. ;)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a908985971 ("target/i386/seg_helper: introduce tss_set_busy",
2023-09-26) failed to use the tss_selector argument of the new function,
which was therefore unused.
This shows up as a #GP fault when booting old versions of 32-bit
Linux.
Fixes: a908985971 ("target/i386/seg_helper: introduce tss_set_busy", 2023-09-26)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20231011135350.438492-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
(target/ was cleaned from invalid CONFIG_SOFTMMU uses at
commit cab35c73be, but these files were merged few days
after, thus missed the cleanup.)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004082239.27251-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The AccelCPUClass::cpu_realizefn handler is meant for target
specific code, rename it using '_target_' to emphasis it.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just remove the declaration. There is nothing in the function after the
switch statement, so it is safe to do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
CVTPS2PD only loads a half-register for memory, unlike the other
operations under 0x0F 0x5A. "Unpack" the group into separate
emission functions instead of using gen_unary_fp_sse.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CVTPS2PD only loads a half-register for memory, like CVTPH2PS. It can
reuse the "ph" packed half-precision size to load a half-register,
but rename it to "xh" because it is now a variation of "x" (it is not
used only for half-precision values).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All these files access the CPU LD/ST API declared in "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-4-philmd@linaro.org>
When CR0.TS=1, execution of x87 FPU, MMX, and some SSE instructions will
cause a Device Not Available (DNA) exception (#NM). System software uses
this exception event to lazily context switch FPU state.
Before this patch, enter_mmx helpers may be generated just before #NM
generation, prematurely resetting FPU state before the guest has a
chance to save it.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
Message-ID: <CADc=-s5F10muEhLs4f3mxqsEPAHWj0XFfOC2sfFMVHrk9fcpMg@mail.gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since cpu_mmu_index() is well-defined for user-only,
we can remove the surrounding #ifdef'ry entirely.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented as the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore move the included templates in the tcg/ directory and
rename as '.h.inc'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230608133108.72655-5-philmd@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before this change, MOVNTPS and MOVNTPD were labeled as Exception Class
4 (only requiring alignment for legacy SSE instructions). This changes
them to Exception Class 1 (always requiring memory alignment), as
documented in the Intel manual.
Message-Id: <20230501111428.95998-3-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the exception classes for some SSE/AVX instructions to match what is
documented in the Intel manual.
These changes are expected to have no functional effect on the behavior
that qemu implements (primarily >= 16-byte memory alignment checks). For
instance, since qemu does not implement the AC flag, there is no
difference in behavior between Exception Classes 4 and 5 for
instructions where the SSE version only takes <16 byte memory operands.
Message-Id: <20230501111428.95998-2-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds some comments describing what instructions correspond to decoding
table entries and fixes some existing comments which named the wrong
instruction.
Message-Id: <20230501111428.95998-1-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vzeroall: xmm_regs should be used instead of xmm_t0
vpermdq: bit 3 and 7 of imm should be considered
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Message-Id: <20230510145222.586487-1-lixinyu20s@ict.ac.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to other SSE instructions, VUCOMISx and VCOMISx are different:
the single and double precision versions are distinguished through a
prefix, however they use no-prefix and 0x66 for SS and SD respectively.
Scalar values usually are associated with 0xF2 and 0xF3.
Because of these, they incorrectly perform a 128-bit memory load instead
of a 32- or 64-bit load. Fix this by writing a custom decoding function.
I tested that the reproducer is fixed and the test-avx output does not
change.
Reported-by: Gabriele Svelto <gsvelto@mozilla.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1637
Fixes: f8d19eec0d ("target/i386: reimplement 0x0f 0x28-0x2f, add AVX", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains (CID 1507880) that the declaration "int error_code;"
in mmu_translate() is unreachable code. Since this is only a declaration,
this isn't actually a bug, but:
* it's a bear-trap for future changes, because if it was changed to
include an initialization 'int error_code = foo;' then the
initialization wouldn't actually happen (being dead code)
* it's against our coding style, which wants declarations to be
at the start of blocks
* it means that anybody reading the code has to go and look up
exactly what the C rules are for skipping over variable declarations
using a goto
Move the declaration to the top of the function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230406155946.3362077-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses are strictly read-only. Most of the obviously so,
as direct arguments to gen_helper_*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute the eflags write mask separately, leaving one call
to the helper. Use tcg_constant_i32.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
In some cases we can avoid a copy from A0 or T0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-23-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
