We assign the instruction destination register to hex_new_value[num]
instead of a TCG temp that gets copied back to hex_new_value[num].
We introduce new functions get_result_gpr[_pair] to facilitate getting
the proper destination register.
Since we preload hex_new_value for predicated instructions, we don't
need the check for slot_cancelled. So, we call gen_log_reg_write instead.
We update the helper function generation and gen_tcg.h to maintain the
disable-hexagon-idef-parser configuration.
Here is a simple example of the differences in the TCG code generated:
IN:
0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) }
BEFORE
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
mov_i32 loc2,$0x0
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 loc2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
and_i32 tmp0,slot_cancelled,$0x8
movcond_i32 new_r2,tmp0,$0x0,loc2,new_r2,eq
mov_i32 r2,new_r2
AFTER
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
mov_i32 r2,new_r2
We'll remove the unnecessary manipulation of slot_cancelled in a
subsequent patch.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-13-tsimpson@quicinc.com>
The pkt_has_store_s1 field in CPUHexagonState is only needed in generated
helpers for scalar load instructions. See check_noshuf and mem_load[1248]
in op_helper.c.
We add logic in gen_analyze_funcs.py to set need_pkt_has_store_s1 in
DisasContext when it is needed at runtime.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-7-tsimpson@quicinc.com>
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-11-anjo@rev.ng>
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
We have found cases where pkt_has_store_s[01] is set incorrectly.
This leads to generating an unnecessary store that is left over
from a previous packet.
Add an attribute to determine if an instruction is a scalar store
The attribute is attached to the fSTORE macro (hex_common.py)
Update the logic in decode.c that sets pkt_has_store_s[01]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-4-tsimpson@quicinc.com>
Add HVX support to the semantics generator
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Change SET_USR_FIELD to write to hex_new_value[HEX_REG_USR] instead
of hex_gpr[HEX_REG_USR].
Then, we need code to mark the instructions that can set implicitly
set USR
- Macros added to hex_common.py
- A_FPOP added in translate.c
Test case added in tests/tcg/hexagon/overflow.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Python scripts generate the following files
helper_protos_generated.h.inc
For each instruction we create DEF_HELPER function prototype
helper_funcs_generated.c.inc
For each instruction we create the helper function definition
tcg_funcs_generated.c.inc
For each instruction we create TCG code to generate call to helper
tcg_func_table_generated.c.inc
Table of function pointers indexed by opcode
shortcode_generated.h.inc
Generate a table of instruction "shortcode" semantics
opcodes_def_generated.h.inc
Gives a list of all the opcodes
op_attribs_generated.h.inc
Lists all the attributes associated with each instruction
op_regs_generated.h.inc
Lists the register and immediate operands for each instruction
printinsn_generated.h.inc
Data for printing (disassembling) each instruction (format
string + operands)
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-21-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
