The system clock is necessary to implement PTP features. While we are
not implementing PTP features for e1000e yet, we do have a plan to
implement them for igb, a new network device derived from e1000e,
so add system clock to the common base first.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot
format, using gzip compression for the payload.
For doing EFI boot in QEMU, this is completely transparent, as the
firmware or bootloader will take care of this. However, for direct
kernel boot without firmware, we will lose the ability to boot such
distro kernels unless we deal with the new format directly.
EFI zboot images contain metadata in the header regarding the placement
of the compressed payload inside the image, and the type of compression
used. This means we can wire up the existing gzip support without too
much hassle, by parsing the header and grabbing the payload from inside
the loaded zboot image.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20230303160109.3626966-1-ardb@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment formatting, fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors") I
fixed the virtio-rng-pci migration compatibility, but it was discovered
that we also need to fix the other aliases of the device for the
transitional cases.
Fixes: 9ea02e8f1 ('virtio-rng-pci: Allow setting nvectors, so we can use MSI-X')
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2162569
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230207174944.138255-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for emulating Xen under Linux/KVM, based on kernel
patches which have been present since Linux v5.12. As with the kernel
support, it's derived from work started by João Martins of Oracle in
2018.
This series just adds the basic platform support — CPUID, hypercalls,
event channels, a stub of XenStore.
A full single-tenant internal implementation of XenStore, and patches
to make QEMU's Xen PV drivers work with this Xen emulation, are waiting
in the wings to be submitted in a follow-on patch series.
As noted in the documentation, it's enabled by setting the xen-version
property on the KVM accelerator, e.g.:
qemu-system-x86_64 -serial mon:stdio -M q35 -display none -m 1G -smp 2 \
-accel kvm,xen-version=0x4000e,kernel-irqchip=split \
-kernel vmlinuz-6.0.7-301.fc37.x86_64 \
-append "console=ttyS0 root=/dev/sda1" \
-drive file=/var/lib/libvirt/images/fedora28.qcow2,if=none,id=disk \
-device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0
Even before this was merged, we've already been using it to find and fix
bugs in the Linux kernel Xen guest support:
https://lore.kernel.org/all/4bffa69a949bfdc92c4a18e5a1c3cbb3b94a0d32.camel@infradead.org/https://lore.kernel.org/all/871qnunycr.ffs@tglx/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report which machine types support ACPI so that management applications
can properly use the 'acpi' property even on platforms such as ARM where
support for ACPI depends on the machine type and thus checking presence
of '-machine acpi=' in 'query-command-line-options' is insufficient.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <537625d3e25d345052322c42ca19812b98b4f49a.1677571792.git.pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The structure is accessed read-only by qdev_get_parent_bus().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230212224730.51438-2-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM *DECLARE* macros expect a typedef as first argument,
not a structure. Replace 'struct IRQState' by 'IRQState'
to avoid when modifying the macros:
../hw/core/irq.c:29:1: error: declaration of anonymous struct must be a definition
DECLARE_INSTANCE_CHECKER(struct IRQState, IRQ,
^
Use OBJECT_DECLARE_SIMPLE_TYPE instead of DECLARE_INSTANCE_CHECKER.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
Get rid of a use of QERR_FEATURE_DISABLED, and improve the slightly
awkward error message
(qemu) info hotpluggable-cpus
Error: The feature 'query-hotpluggable-cpus' is not enabled
to
Error: machine does not support hot-plugging CPUs
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-11-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
qmp_query_vm_generation_id() in stubs/vmgenid.c is the last user of
QERR_UNSUPPORTED outside qga/. Unlike the stubs we just dropped, it
is actually reachable, namely when CONFIG_ACPI_VMGENID is off. It
always fails like
(qemu) info vm-generation-id
Error: this feature or command is not currently supported
Turns out the real qmp_query_vm_generation_id() doesn't actually
depend on CONFIG_ACPI_VMGENID, and fails safely when it's off. Move
it to hw/core/machine-qmp-cmds.c, and drop the stub. The error
message becomes
Error: VM Generation ID device not found
Feels like an improvement to me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
Get rid of a use of QERR_UNSUPPORTED, and improve the rather vague
error message
(qemu) nmi
Error: this feature or command is not currently supported
to
Error: machine does not provide NMIs
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
The bitmap and the size are immutable while migration is active: see
virtio_mem_is_busy(). We can migrate this information early, before
migrating any actual RAM content. Further, all information we need for
sanity checks is immutable as well.
Having this information in place early will, for example, allow for
properly preallocating memory before touching these memory locations
during RAM migration: this way, we can make sure that all memory was
actually preallocated and that any user errors (e.g., insufficient
hugetlb pages) can be handled gracefully.
In contrast, usable_region_size and requested_size can theoretically
still be modified on the source while the VM is running. Keep migrating
these properties the usual, late, way.
Use a new device property to keep behavior of compat machines
unmodified.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>S
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Machine core".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-11-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to "Machine
core".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-10-armbru@redhat.com>
Fixup the migration compatibility for existing machine types
so that they do not enable msi-x.
Symptom:
(qemu) qemu: get_pci_config_device: Bad config data: i=0x34 read: 84 device: 98 cmask: ff wmask: 0 w1cmask:0
qemu: Failed to load PCIDevice:config
qemu: Failed to load virtio-rng:virtio
qemu: error while loading state for instance 0x0 of device '0000:00:03.0/virtio-rng'
qemu: load of migration failed: Invalid argument
Note: This fix will break migration from 7.2->7.2-fixed with this patch
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2155749
Fixes: 9ea02e8f1 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230109105809.163975-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Daney <david.daney@fungible.com>
Fixes: 9ea02e8f1 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")<br>
Signed-off-by: Dr. David Alan Gilbert <<a href="mailto:dgilbert@redhat.com" target="_blank">dgilbert@redhat.com</a>><br>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'slew' tick policy is currently enforced to be only available on
x86 via some "#ifdef TARGET_I386" statements in mc146818rtc.c. We
want to get rid of those #ifdefs, so we need a different way of
checking whether the policy is allowed or not. Using the setter
function in hw/core/qdev-properties-system.c seems to be a good
place, so let's add a check here.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230110095351.611724-3-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mostly vhost-vdpa:
guest announce feature emulation when using shadow virtqueue
support for configure interrupt
startup speed ups
an acpi change to only generate cluster node in PPTT when specified for arm
misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmO6eGMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpoUIIALqC3UtJcK3AuAMbeqVokxl5CPwoeXMyi+rT
0QuN8m8dpBtJFpy3Vyq0afixOFmlwvORW5ye4QI97OyIhtLJq00buzQsgHjNoPo3
zN2L0BDyofDmfFHgCxcEbv2aAO8TaqRSHmKffEFmf8JDMDL9Ev1QvPTWHhfm2eJf
VKPHOtCA/3WXBD9JNfYJ0YuzCrrJaMhIO6/5tqv9yjMxWTfEFa1J2Sr2tWkRLuDk
FPfApy7afjI705Guv6PllZ3JdOMwf7iZaoBK6mSdCDSyi1xciYM0VeWi8SLD4qbM
N+9NkUQOIYS5ZC4BXrULy6HDUsECJ71I0pvHveX7nwbK6xPD4RQ=
=0tPe
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
mostly vhost-vdpa:
guest announce feature emulation when using shadow virtqueue
support for configure interrupt
startup speed ups
an acpi change to only generate cluster node in PPTT when specified for arm
misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 08 Jan 2023 08:01:39 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (50 commits)
vhost-scsi: fix memleak of vsc->inflight
acpi: cpuhp: fix guest-visible maximum access size to the legacy reg block
tests: acpi: aarch64: Add *.topology tables
tests: acpi: aarch64: Add topology test for aarch64
tests: acpi: Add and whitelist *.topology blobs
tests: virt: Update expected ACPI tables for virt test
hw/acpi/aml-build: Only generate cluster node in PPTT when specified
tests: virt: Allow changes to PPTT test table
virtio-pci: fix proxy->vector_irqfd leak in virtio_pci_set_guest_notifiers
vdpa: commit all host notifier MRs in a single MR transaction
vhost: configure all host notifiers in a single MR transaction
vhost: simplify vhost_dev_enable_notifiers
vdpa: harden the error path if get_iova_range failed
vdpa-dev: get iova range explicitly
docs/devel: Rules on #include in headers
include: Include headers where needed
include/hw/virtio: Break inclusion loop
include/hw/cxl: Break inclusion loop cxl_pci.h and cxl_cdat_h
include/hw/pci: Include hw/pci/pci.h where needed
include/hw/pci: Split pci_device.h off pci.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we'll always generate a cluster node no matter user has
specified '-smp clusters=X' or not. Cluster is an optional level
and will participant the building of Linux scheduling domains and
only appears on a few platforms. It's unncessary to always build
it when it cannot reflect the real topology on platforms having no
cluster implementation and to avoid affecting the linux scheduling
domains in the VM. So only generate the cluster topology in ACPI
PPTT when the user has specified it explicitly in -smp.
Tested qemu-system-aarch64 with `-smp 8` and linux 6.1-rc1, without
this patch:
estuary:/sys/devices/system/cpu/cpu0/topology$ cat cluster_*
ff # cluster_cpus
0-7 # cluster_cpus_list
56 # cluster_id
with this patch:
estuary:/sys/devices/system/cpu/cpu0/topology$ cat cluster_*
ff # cluster_cpus
0-7 # cluster_cpus_list
36 # cluster_id, with no cluster node kernel will make it to
physical package id
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Message-Id: <20221229065513.55652-3-yangyicong@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move "qemu/accel.h" include from the heavily included
"hw/boards.h" to hw/core/machine.c, the single file using
the AccelState definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20221130135641.85328-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While we initialize this value in cpu_common_reset, that
isn't called during startup, so set it as well in init.
This fixes -singlestep versus the very first TB.
Fixes: 04f5b647ed ("accel/tcg: Handle -singlestep in curr_cflags")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc]
Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x]
Reviewed-by: Greg Kurz <groug@kaod.org> [ppc]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-2-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Convert the parent class TYPE_CPU to 3-phase reset. This
is a necessary prerequisite to converting the subclasses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221124115023.2437291-2-peter.maydell@linaro.org
The device_legacy_reset() function is now not used anywhere, so we
can remove the implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the qdev_reset_all() and qbus_reset_all() functions, now we
have moved all the callers over to the new device_cold_reset() and
bus_cold_reset() functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/qdev.json and
qapi/qom.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-21-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
include/qapi/error.h advises to put ERRP_GUARD() right at the
beginning of the function, because only then can it guard the whole
function. Clean up the few spots disregarding the advice.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
include/qapi/error.h on ERRP_GUARD():
* It must be used when the function dereferences @errp or passes
* @errp to error_prepend(), error_vprepend(), or error_append_hint().
* It is safe to use even when it's not needed, but please avoid
* cluttering the source with useless code.
Clean up some of this clutter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-3-armbru@redhat.com>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code for handling the reset level count in the Resettable code
has two issues:
The reset count is only decremented for the 1->0 case. This means
that if there's ever a nested reset that takes the count to 2 then it
will never again be decremented. Eventually the count will exceed
the '50' limit in resettable_phase_enter() and QEMU will trip over
the assertion failure. The repro case in issue 1266 is an example of
this that happens now the SCSI subsystem uses three-phase reset.
Secondly, the count is decremented only after the exit phase handler
is called. Moving the reset count decrement from "just after" to
"just before" calling the exit phase handler allows
resettable_is_in_reset() to return false during the handler
execution.
This simplifies reset handling in resettable devices. Typically, a
function that updates the device state will just need to read the
current reset state and not anymore treat the "in a reset-exit
transition" as a special case.
Note that the semantics change to the *_is_in_reset() functions
will have no effect on the current codebase, because only two
devices (hw/char/cadence_uart.c and hw/misc/zynq_sclr.c) currently
call those functions, and in neither case do they do it from the
device's exit phase methed.
Fixes: 4a5fc890 ("scsi: Use device_cold_reset() and bus_cold_reset()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1266
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Michael Peter <michael.peter@hensoldt-cyber.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221020142749.3357951-1-peter.maydell@linaro.org
Buglink: https://bugs.launchpad.net/qemu/+bug/1905297
Reported-by: Michael Peter <michael.peter@hensoldt-cyber.com>
[PMM: adjust the docs paragraph changed to get the name of the
'enter' phase right and to clarify exactly when the count is
adjusted; rewrite the commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make list traversal work when a callback removes a notifier
mid-traversal. This is a cleanup to prevent bugs in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-id: 20221013185908.1297568-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a RAMBlockNotifier is added, ->ram_block_added() is called with all
existing RAMBlocks. There is no equivalent ->ram_block_removed() call
when a RAMBlockNotifier is removed.
The util/vfio-helpers.c code (the sole user of RAMBlockNotifier) is fine
with this asymmetry because it does not rely on RAMBlockNotifier for
cleanup. It walks its internal list of DMA mappings and unmaps them by
itself.
Future users of RAMBlockNotifier may not have an internal data structure
that records added RAMBlocks so they will need ->ram_block_removed()
callbacks.
This patch makes ram_block_notifier_remove() symmetric with respect to
callbacks. Now util/vfio-helpers.c needs to unmap remaining DMA mappings
after ram_block_notifier_remove() has been called. This is necessary
since users like block/nvme.c may create additional DMA mappings that do
not originate from the RAMBlockNotifier.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Wrap the bare TranslationBlock pointer into a structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a heavily used function so lets avoid the cost of
CPU_GET_CLASS. On the romulus-bmc run it has a modest effect:
Before: 36.812 s ± 0.506 s
After: 35.912 s ± 0.168 s
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220811151413.3350684-4-alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220923084803.498337-4-clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"platform" is not a valid name for a bus node in dt-schema, so warnings
can be see in dt-validate on a dump of the riscv virt dtb:
/stuff/qemu/qemu.dtb: platform@4000000: $nodename:0: 'platform@4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
"platform-bus" is a valid name, so use that instead.
CC: Rob Herring <robh@kernel.org>
Fixes: 11d306b9df ("hw/arm/sysbus-fdt: helpers for platform bus nodes addition")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-5-mail@conchuod.ie
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add blocker to prevent hot-unplug of devices
TYPE_VFIO_USER_SERVER, which is introduced shortly, attaches itself to a
PCIDevice on which it depends. If the attached PCIDevice gets removed
while the server in use, it could cause it crash. To prevent this,
TYPE_VFIO_USER_SERVER adds an unplug blocker for the PCIDevice.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c41ef80b7cc063314d629737bed2159e5713f2e0.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This removes the last of the CXL code from the MachineState where it
is visible to all Machines to only those that support CXL (currently i386/pc)
As i386/pc always support CXL now, stop allocating the state independently.
Note the pxb register hookup code runs even if cxl=off in order to detect
pxb_cxl host bridges and fail to start if any are present as they won't
have the control registers available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Various loader functions return an int which limits images to 2GB which
is fine for things like a BIOS/kernel image, but if we want to be able
to load memory images or large ramdisks then any file over 2GB would
silently fail to load.
Cc: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We cannot provide auto-generated unique or persistent namespace
identifiers (EUI64, NGUID, UUID) easily. Since 6.1, namespaces have been
assigned a generated EUI64 of the form "52:54:00:<namespace counter>".
This is will be unique within a QEMU instance, but not globally.
Revert that this is assigned automatically and immediately deprecate the
compatibility parameter. Users can opt-in to this with the
`eui64-default=on` device parameter or set it explicitly with
`eui64=UINT64`.
Cc: libvir-list@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
VxWorks 7 uses the same boot interface as the Linux kernel on Arm
(64-bit only), PowerPC and RISC-V architectures. Add logic to set
is_linux to true for VxWorks uImage for these architectures in
load_uboot_image().
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220324134812.541274-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
=xdSk
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The DEFINE_PROP_UINT64_CHECKMASK maro applies certain mask check agaist
user-supplied property value, reject the value if it violates the bitmask.
Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are going to be some potential overheads to CXL enablement,
for example the host bridge region reserved in memory maps.
Add a machine level control so that CXL is disabled by default.
Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows setting memory properties without going through
vl.c, and have them validated just the same.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle HostMemoryBackend creation and setting of ms->ram entirely in
machine_run_board_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -m syntactic sugar for a compound property "-machine
mem.{size,max-size,slots}". The new property does not have
the magic conversion to megabytes of unsuffixed arguments,
and also does not understand that "0" means the default size
(you have to leave it out to get the default). This means
that we need to convert the QemuOpts by hand to a QDict.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -boot syntactic sugar for a compound property "-machine boot.{order,menu,...}".
machine_boot_parse is replaced by the setter for the property.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds cluster-id in CPU instance properties, which will be used
by arm/virt machine. Besides, the cluster-id is also verified or
dumped in various spots:
* hw/core/machine.c::machine_set_cpu_numa_node() to associate
CPU with its NUMA node.
* hw/core/machine.c::machine_numa_finish_cpu_init() to record
CPU slots with no NUMA mapping set.
* hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump
cluster-id.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM virt machine currently uses sysbus-fdt to create device tree
entries for dynamically created MMIO devices.
The RISC-V virt machine can also benefit from this, so move the code to
the core directory.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
=rMle
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Add cpu0-id to query-sev-capabilities
* whpx support for breakpoints and stepping
* initial support for Hyper-V Synthetic Debugging
* use monotonic clock for QemuCond and QemuSemaphore
* Remove qemu-common.h include from most units and lots of other clenaups
* do not include headers for all virtio devices in virtio-ccw.h
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJXCQAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNT6wf+NHDJUEdDiwaVGVTGXgHuiaycsymi
# FpNPiw/+XxSGN5xF3fkUGgqaDrcwIYwVfnXlghKSz8kp1cP3cjxa5CzNMLGTp5je
# N6BxFbD7yC6dhagGm3mj32jlsptv3M38OHqKc3t+RaUAotP5RF2VdCyfUBLG6vU0
# aMzvMfMtB5aG0D8Fr5EV63t1JMTceFU0YxsG73UCFs2Yx4Z0cGBbNxMbHweRhd1q
# tPeVDS46MFPM3/2cGGHpeeqxkoCTU7A9j1VuNQI3k+Kg+6W5YVxiK/UP7bw77E/a
# yAHsmIVTNro8ajMBch73weuHtGtdfFLvCKc6QX6aVjzK4dF1voQ01E7gPQ==
# =rMle
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Apr 2022 10:31:44 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (53 commits)
target/i386: Remove unused XMMReg, YMMReg types and CPUState fields
target/i386: do not access beyond the low 128 bits of SSE registers
virtio-ccw: do not include headers for all virtio devices
virtio-ccw: move device type declarations to .c files
virtio-ccw: move vhost_ccw_scsi to a separate file
s390x: follow qdev tree to detect SCSI device on a CCW bus
hw: hyperv: Initial commit for Synthetic Debugging device
hyperv: Add support to process syndbg commands
hyperv: Add definitions for syndbg
hyperv: SControl is optional to enable SynIc
thread-posix: optimize qemu_sem_timedwait with zero timeout
thread-posix: implement Semaphore with QemuCond and QemuMutex
thread-posix: use monotonic clock for QemuCond and QemuSemaphore
thread-posix: remove the posix semaphore support
whpx: Added support for breakpoints and stepping
build-sys: simplify AF_VSOCK check
build-sys: drop ntddscsi.h check
Remove qemu-common.h include from most units
qga: remove explicit environ argument from exec/spawn
Move fcntl_setfl() to oslib-posix
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vmstate_acpi_pcihp_use_acpi_index() was expecting AcpiPciHpState
as state but it actually received PIIX4PMState, because
VMSTATE_PCI_HOTPLUG is a macro and not another struct.
So it ended up accessing random pointer, which resulted
in 'false' return value and acpi_index field wasn't ever
sent.
However in 7.0 that pointer de-references to value > 0, and
destination QEMU starts to expect the field which isn't
sent in migratioon stream from older QEMU (6.2 and older).
As result migration fails with:
qemu-system-x86_64: Missing section footer for 0000:00:01.3/piix4_pm
qemu-system-x86_64: load of migration failed: Invalid argument
In addition with QEMU-6.2, destination due to not expected
state, also never expects the acpi_index field in migration
stream.
Q35 is not affected as it always sends/expects the field as
long as acpi based PCI hotplug is enabled.
Fix issue by introducing compat knob to never send/expect
acpi_index in migration stream for 6.2 and older PC machine
types and always send it for 7.0 and newer PC machine types.
Diagnosed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b32bd76 ("pci: introduce acpi-index property for PCI device")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/932
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Add the missing VMSTATE_END_OF_LIST to vmstate_muldiv
Fixes: 99abcbc760 ("clock: Provide builtin multiplier/divider")
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220111101934.115028-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The previous numbers were a guess at best and rather arbitrary without
taking into account anything that might be loaded. Instead of using
guesses based on the state of registers implement a new function that:
a) scans the MemoryRegions for the largest RAM block
b) iterates through all "ROM" blobs looking for the biggest gap
The "ROM" blobs include all code loaded via -kernel and the various
-device loader techniques.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Andrew Strauss <astrauss11@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220225172021.3493923-18-alex.bennee@linaro.org>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220207082756.82600-7-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The documentation for the generic loader says that "the maximum size of
the data is 8 bytes". However, attempts to set data-len=8 trigger the
following assertion failure:
../hw/core/generic-loader.c:59: generic_loader_reset: Assertion `s->data_len < sizeof(s->data)' failed.
The type of s->data is uint64_t (i.e. 8 bytes long), so I believe this
assert should use <= instead of <.
Fixes: e481a1f63c ("generic-loader: Add a generic loader")
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120092715.7805-1-ptesarik@suse.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the mem_size of the segment is bigger than the file_size,
and if this space doesn't overlap another segment, it needs
to be cleared.
This bug is very similar to the one we had for linux-user,
22d113b52f ("linux-user: Fix loading of BSS segments"),
where .bss section is encoded as an extension of the the data
one by setting the segment p_memsz > p_filesz.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
[PMD: Use recently added address_space_set()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220115203725.3834712-3-laurent@vivier.eu>
memory_region_is_mapped() is the wrong check, we actually want to check
whether the backend is already marked mapped.
For example, memory regions mapped via an alias, such as NVDIMMs,
currently don't make memory_region_is_mapped() return "true". As the
machine is initialized before any memory devices (and thereby before
NVDIMMs are initialized), this isn't a fix but merely a cleanup.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211102164317.45658-2-david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add 7.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211217143948.289995-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The new Cluster-Aware Scheduling support has landed in Linux 5.16,
which has been proved to benefit the scheduling performance (e.g.
load balance and wake_affine strategy) on both x86_64 and AArch64.
So now in Linux 5.16 we have four-level arch-neutral CPU topology
definition like below and a new scheduler level for clusters.
struct cpu_topology {
int thread_id;
int core_id;
int cluster_id;
int package_id;
int llc_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
cpumask_t cluster_sibling;
cpumask_t llc_sibling;
}
A cluster generally means a group of CPU cores which share L2 cache
or other mid-level resources, and it is the shared resources that
is used to improve scheduler's behavior. From the point of view of
the size range, it's between CPU die and CPU core. For example, on
some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node,
and 4 CPU cores in each cluster. The 4 CPU cores share a separate
L2 cache and a L3 cache tag, which brings cache affinity advantage.
In virtualization, on the Hosts which have pClusters (physical
clusters), if we can design a vCPU topology with cluster level for
guest kernel and have a dedicated vCPU pinning. A Cluster-Aware
Guest kernel can also make use of the cache affinity of CPU clusters
to gain similar scheduling performance.
This patch adds infrastructure for CPU cluster level topology
configuration and parsing, so that the user can specify cluster
parameter if their machines support it.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Added '(since 7.0)' to @clusters in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
All methods related to MachineState are prefixed with "machine_".
smp_parse() does not need to be an exception. Rename it and
const'ify the SMPConfiguration argument, since it doesn't need
to be modified.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211216132015.815493-9-philmd@redhat.com>
@pin is an input where we connect a device output.
Rename it @input_pin to simplify the documentation.
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211218130437.1516929-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change namespaces to be shared namespaces by default (parameter
shared=on). Keep shared=off for older machine types.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the MEMORY_DEVICE_INFO_KIND_SGX_EPC case, so that enclave
memory is included in the output of "info numa" instead of crashing
the monitor.
Fixes: a7c565a941 ("sgx-epc: Add the fill_device_info() callback support", 2021-09-30)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw_compat_5_2 has an issue: it affects only "virtio-net-pci"
but not "virtio-net-pci-transitional" and
"virtio-net-pci-non-transitional". The solution is to use the
"virtio-net-pci-base" type in compat_props.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1999141
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
