Instead of ignoring any errors that occur when adding properties
to a new device in device_initfn(), check for them and abort if any
occur. The most likely cause is accidentally adding a duplicate
property, which is a programming error by the device author.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364217314-7400-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Detect attempts to add a property to an object if one of
that name already exists, and report them as errors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364217314-7400-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we have error_setg() we can improve the error message emitted if
you attempt to set a property of a device after the device is realized
(the previous message was "permission denied" which was not very
informative).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1364218844-7509-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed. Just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-11-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-scsi-pci and virtio-scsi-s390 are switched to the new API,
we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-scsi-ccw is modified for the new API. The device
virtio-scsi-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-scsi-s390 is modified for the new API. The device
virtio-scsi-s390 extends virtio-s390-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-scsi-pci is modified for the new API. The device virtio-scsi-pci
extends virtio-pci. It creates and connects a virtio-scsi during the init.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-scsi which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
host_features field is part of the transport device. So move all the
host_features related properties into transport device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allocate/Free the cmd_vqs array separately to have a fixed size device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configuration field must not be a pointer as it will be used for virtio-scsi
properties. So *conf is replaced by conf.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Corey Bryant (2) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
New QMP command query-cpu-max and HMP command cpu_max
qmp: fix handling of boolean values in qmp-shell
QMP: TPM QMP and man page documentation updates
QMP: Remove duplicate TPM type from query-tpm
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qmp-shell converts only integer arguments and the rest
is assumed to be strings which are faithfully sent as
quoted strings by json. But QEMU refuses to accept qmp
command with boolean argument whose value is escaped
as string.
Fix it by special-casing true/false keywords and store
value as corresponding boolean.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Dmitry Fleytman (5) and others
# Via Stefan Hajnoczi
* stefanha/net:
net: increase buffer size to accommodate Jumbo frame pkts
VMXNET3 device implementation
Packet abstraction for VMWARE network devices
Common definitions for VMWARE devices
net: iovec checksum calculator
Checksum-related utility functions
net: use socket_set_nodelay() for -netdev socket
# By Liu Yuan (1) and Stefan Weil (1)
# Via Stefan Hajnoczi
* stefanha/block:
block: Add options QDict to bdrv_file_open() prototypes (fix MinGW build)
rbd: fix compile error
This solves, e.g., sticky ALT when selecting a GTK menu, switching to a
different window or selecting a different virtual console.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 514F417A.6010908@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.
Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net
NIC model). Test is simple: ping -M do -s 8500 <target>. This test will
attempt to ping with unfragmented packet of given size. Without patch, size
is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).
v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes
net_raw_checksum()
checksum calculation for a buffer
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c. Since we are tunelling Ethernet
over TCP we shouldn't artificially delay outgoing packets, let the guest
decide packet scheduling.
I already get sub-millisecond -netdev socket ping times on localhost, so
there was no measurable difference in my testing. This won't hurt
though and may improve remote socket performance.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The new parameter is unused yet.
This part was missing in commit 787e4a8500.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 787e4a85 [block: Add options QDict to bdrv_file_open() prototypes] didn't
update rbd.c accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can compute the value in cpu_dump_state anyway, and gratuitous
modifications to eflags creates heisenbugs.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When starting from CC_OP_DYNAMIC, and issuing adox before adcx,
a typo used the wrong value for the resulting CC_OP.
Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: Torbjorn Granlund <tg@gmplib.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (58 commits)
target-ppc: Use NARROW_MODE macro for tlbie
target-ppc: Use NARROW_MODE macro for addresses
target-ppc: Use NARROW_MODE macro for comparisons
target-ppc: Use NARROW_MODE macro for branches
target-ppc: Fix add and subf carry generation in narrow mode
target-ppc: Use QOM method dispatch for MMU fault handling
target-ppc: Move ppc tlb_fill implementation into mmu_helper.c
target-ppc: Split user only code out of mmu_helper.c
mmu-hash64: Implement Virtual Page Class Key Protection
mmu-hash*: Merge translate and fault handling functions
mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_debug()
mmu-hash*: Correctly mask RPN from hash PTE
mmu-hash*: Clean up real address calculation
mmu-hash*: Clean up PTE flags update
mmu-hash64: Factor SLB N bit into permissions bits
mmu-hash*: Clean up permission checking
mmu-hash32: Remove nx from context structure
mmu-hash*: Don't update PTE flags when permission is denied
mmu-hash32: Don't look up page tables on BAT permission error
mmu-hash32: Cleanup BAT lookup
...
is_tcg_gen_code() checks the upper limit of TCG generated code range wrong, so
that TCG could get broken occasionally only when CONFIG_QEMU_LDST_OPTIMIZATION
enabled. The reason is code_gen_buffer_max_size does not cover the upper range
up to (TCG_MAX_OP_SIZE * OPC_BUF_SIZE), thus code_gen_buffer_max_size should be
modified to code_gen_buffer_size.
CC: qemu-stable@nongnu.org
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
nbd: Check against invalid option combinations
nbd: Use default port if only host is specified
block: Allow omitting the file name when using driver-specific options
block: Make find_image_format safe with NULL filename
block: Rename variable to avoid shadowing
block: Introduce .bdrv_parse_filename callback
nbd: Accept -drive options for the network connection
nbd: Remove unused functions
nbd: Keep hostname and port separate
qemu-socket: Make socket_optslist public
block: Pass bdrv_file_open() options to block drivers
block: Add options QDict to bdrv_file_open() prototypes
block: complete all IOs before resizing a device
Revert "block: complete all IOs before .bdrv_truncate"
# By liguang (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qdev: remove redundant abort()
gitignore: ignore more files
Use proper term in TCG README
serial: Fix debug format strings
Fix typos and misspellings
Advertise --libdir in configure --help output
memory: fix a bug of detection of memory region collision
MinGW: Replace setsockopt by qemu_setsocketopt
A file name may only specified if no host or socket path is specified.
The latter two may not appear at the same time either.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The URL method already takes care to apply the default port when none is
specfied. Directly specifying driver-specific options required the port
number until now. Allow leaving it out and apply the default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
