This converts the remaining TLB flush routines to use async work when
detecting a cross-vCPU flush. The only minor complication is having to
serialise the var_list of MMU indexes into a form that can be punted
to an asynchronous job.
The pending_tlb_flush field on QOM's CPU structure also becomes a
bitfield rather than a boolean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.
For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:
tlb_flush_page_by_mmuidx(other_cs, pageaddr,
(1 << ARMMMUIdx_S1SE1) |
(1 << ARMMMUIdx_S1SE0));
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some architectures allow to flush the tlb of other VCPUs. This is not a problem
when we have only one thread for all VCPUs but it definitely needs to be an
asynchronous work when we are in true multithreaded work.
We take the tb_lock() when doing this to avoid racing with other threads
which may be invalidating TB's at the same time. The alternative would
be to use proper atomic primitives to clear the tlb entries en-mass.
This patch doesn't do anything to protect other cputlb function being
called in MTTCG mode making cross vCPU changes.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: remove need for g_malloc on defer, make check fixes, tb_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This moves the helper function closer to where it is called and updates
the error message to report via error_report instead of the deprecated
fprintf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
For SoftMMU the TLB flushes are an example of a task that can be
triggered on one vCPU by another. To deal with this properly we need to
use safe work to ensure these changes are done safely. The new assert
can be enabled while debugging to catch these cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The patch enables handling atomic code in the guest. This should be
preferably done in cpu_handle_exception(), but the current assumptions
regarding when we can execute atomic sections cause a deadlock.
The current mechanism discards the flags which were set in atomic
execution. We ensure they are properly saved by calling the
cc->cpu_exec_enter/leave() functions around the loop.
As we are running cpu_exec_step_atomic() from the outermost loop we
need to avoid an abort() when single stepping over atomic code since
debug exception longjmp will point to the the setlongjmp in
cpu_exec(). We do this by setting a new jmp_env so that it jumps back
here on an exception.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak title, merge with new patches, add mmap_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
CC: Paolo Bonzini <pbonzini@redhat.com>
There are a couple of changes that occur at the same time here:
- introduce a single vCPU qemu_tcg_cpu_thread_fn
One of these is spawned per vCPU with its own Thread and Condition
variables. qemu_tcg_rr_cpu_thread_fn is the new name for the old
single threaded function.
- the TLS current_cpu variable is now live for the lifetime of MTTCG
vCPU threads. This is for future work where async jobs need to know
the vCPU context they are operating in.
The user to switch on multi-thread behaviour and spawn a thread
per-vCPU. For a simple test kvm-unit-test like:
./arm/run ./arm/locking-test.flat -smp 4 -accel tcg,thread=multi
Will now use 4 vCPU threads and have an expected FAIL (instead of the
unexpected PASS) as the default mode of the test has no protection when
incrementing a shared variable.
We enable the parallel_cpus flag to ensure we generate correct barrier
and atomic code if supported by the front and backends. This doesn't
automatically enable MTTCG until default_mttcg_enabled() is updated to
check the configuration is supported.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: Some fixes, conditionally, commit rewording]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
tb_lock() has long been used for linux-user mode to protect code
generation. By enabling it now we prepare for MTTCG and ensure all code
generation is serialised by this lock. The other major structure that
needs protecting is the l1_map and its PageDesc structures. For the
SoftMMU case we also use tb_lock() to protect these structures instead
of linux-user mmap_lock() which as the name suggests serialises updates
to the structure as a result of guest mmap operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along. As an cpu->exit_request may legitimately get squashed
while processing the EXCP_INTERRUPT exception we also check
cpu->queued_work_first to ensure queued work is expedited as soon as
possible.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Currently we rely on the side effect of the main loop grabbing the
iothread_mutex to give any long running basic block chains a kick to
ensure the next vCPU is scheduled. As this code is being re-factored and
rationalised we now do it explicitly here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We'll be using the memory ordering definitions to define values for
both the host and guest. To avoid fighting with circular header
dependencies just move these types into their own minimal header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The recent patch enabling lock assertions uncovered the missing lock
acquisition in cpu_exec_step(). This patch adds them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable tcg lock debug asserts in a debug build by default instead of
relying on DEBUG_LOCKING. None of the other DEBUG_* macros have
asserts, so this patch removes DEBUG_LOCKING and enable these asserts
in a debug build.
CC: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak ifdefs so can be early in series]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This documents the current design for upgrading TCG emulation to take
advantage of modern CPUs by running a thread-per-CPU. The document goes
through the various areas of the code affected by such a change and
proposes design requirements for each part of the solution.
The text marked with (Current solution[s]) to document what the current
approaches being used are.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This reverts commit d3473e147a.
This commit creates a board which defaults to having 2GB of RAM.
Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM,
and so 'make check' fails. I missed this during testing of the
merge, unfortunately. Luckily the offending commit is the last
one in the merge request, so we can just revert it for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Changes:
* Add MIPS Boston board support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=sAzw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170222' into staging
MIPS patches 2017-02-22
Changes:
* Add MIPS Boston board support
# gpg: Signature made Wed 22 Feb 2017 00:08:00 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170222:
hw/mips: MIPS Boston board support
hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller
loader: Support Flattened Image Trees (FIT images)
dtc: Update requirement to v1.4.2
target-mips: Provide function to test if a CPU supports an ISA
hw/mips_gic: Update pin state on mask changes
hw/mips_gictimer: provide API for retrieving frequency
hw/mips_cmgcr: allow GCR base to be moved
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
removed returning on !level,
updated IRQ connection with GPIO logic,
moved xilinx_pcie_init() to boston.c
replaced stw_le_p() with pci_set_word()
and other cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.
The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
fixed potential memory leaks,
isolated building option]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In order to obtain fdt_first_subnode & fdt_next_subnode symbols from
libfdt for use by a later patch, bump the requirement for dtc to v1.4.2
& the submodule to that same version.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Provide a new cpu_supports_isa function which allows callers to
determine whether a CPU supports one of the ISA_ flags, by testing
whether the associated struct mips_def_t sets the ISA flags in its
insn_flags field.
An example use of this is to allow boards which generate bootloader code
to determine the properties of the CPU that will be used, for example
whether the CPU is 64 bit or which architecture revision it implements.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
If the GIC interrupt mask is changed by a write to the smask (set mask)
or rmask (reset mask) registers, we need to re-evaluate the state of the
pins/IRQs fed to the CPU. Without doing so we risk leaving a pin high
despite the interrupt that led to that state being masked, or losing
interrupts if an already pending interrupt is unmasked.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Provide a new function mips_gictimer_get_freq() which returns the
frequency at which a GIC timer will count. This will be useful for
boards which perform setup based upon this frequency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
register appropriately. This is required if a platform needs to move its
GCRs away from other memory, as the MIPS Boston development board does
to avoid its flash memory.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Note, I had seen a fail in the vhost-user/flags-mismatch on one
host in one build, but not others with the same patches; and these patches
go nowhere near that, so I think that's a separate vhost-user issue.
-----BEGIN PGP SIGNATURE-----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=eKOl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170221' into staging
HMP pull
Note, I had seen a fail in the vhost-user/flags-mismatch on one
host in one build, but not others with the same patches; and these patches
go nowhere near that, so I think that's a separate vhost-user issue.
# gpg: Signature made Tue 21 Feb 2017 18:49:25 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20170221:
monitor: Fix crashes when using HMP commands without CPU
monitor: add poll-* properties into query-iothreads result
hmp: fix block_set_io_throttle
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running certain HMP commands ("info registers", "info cpustats",
"info tlb", "nmi", "memsave" or dumping virtual memory) with the "none"
machine, QEMU crashes with a segmentation fault. This happens because the
"none" machine does not have any CPUs by default, but these HMP commands
did not check for a valid CPU pointer yet. Add such checks now, so we get
an error message about the missing CPU instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
IOthreads were recently extended by new properties that can
enable/disable and configure aio polling. This will also allow
other tools that uses QEMU to probe for existence of those new
properties via query-qmp-schema.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Message-Id: <3163c16d6ab4257f7be9ad44fe9cc0ce8c359e5a.1486718555.git.phrdina@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 7a9877a made the 'device' parameter to BlockIOThrottle
optional, favoring 'id' instead. But it forgot to update the
HMP usage to set has_device, which makes all attempts to change
throttling via HMP fail with "Need exactly one of 'device' and 'id'"
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170120230359.4244-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The sheepdog URL is broken twice: First it uses a duplicated
http:// prefix, second the website seems to have moved to
https://sheepdog.github.io/sheepdog/ instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
If explicit zeroing out before mirroring is required for the target image,
it moves the block job offset counter to EOF, then offset and len counters
count the image size twice. There is no harm but stats are confusing,
specifically the progress of the operation is always reported as 99% by
management tools.
The patch skips offset increase for the first "technical" pass over the
image. This should not cause any further harm.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1486045515-8009-1-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This adds blockdev-add support for iscsi devices.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
All -iscsi options have a corresponding driver-specific option for the
iscsi block driver now.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This splits the logic in the old parse_chap() function into a part that
parses the -iscsi options into the new driver-specific options, and
another part that actually applies those options (called apply_chap()
now).
Note that this means that username and password specified with -iscsi
only take effect when a URL is provided. This is intentional, -iscsi is
a legacy interface only supported for compatibility, new users should
use the proper driver-specific options.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This introduces a .bdrv_parse_filename handler for iscsi which parses an
URL if given and translates it to individual options.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
-----BEGIN PGP SIGNATURE-----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=/97H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-21' into staging
Changes to -drive without if= and with if=scsi
# gpg: Signature made Tue 21 Feb 2017 12:22:35 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-block-2017-02-21:
hw/i386: Deprecate -drive if=scsi with PC machine types
hw: Deprecate -drive if=scsi with non-onboard HBAs
hw/scsi: Concentrate -drive if=scsi auto-create in one place
hw: Drop superfluous special checks for orphaned -drive
blockdev: Make orphaned -drive fatal
blockdev: Improve message for orphaned -drive
hw/arm/highbank: Default -drive to if=ide instead of if=scsi
hw: Default -drive to if=none instead of scsi when scsi cannot work
hw: Default -drive to if=none instead of ide when ide cannot work
hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus
hw: Default -drive to if=ide explicitly where it works
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types. Deprecate this usage, as follows.
Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types. Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For
all other interface types, it's in machine initialization code.
A few machine types create the SCSI HBAs necessary for that. That's
also not done for other interface types.
I'm going to deprecate these SCSI eccentricities. In preparation for
that, create the frontends in main() instead of the SCSI HBAs, by
calling new function scsi_legacy_handle_cmdline() there.
Note that not all SCSI HBAs create frontends. Take care not to change
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
We've traditionally rejected orphans here and there, but not
systematically. For instance, the sun4m machines have an onboard SCSI
HBA (bus=0), and have always rejected bus>0. Other machines with an
onboard SCSI HBA don't.
Commit a66c9dc made all orphans trigger a warning, and the previous
commit turned this into an error. The checks "here and there" are now
redundant. Drop them.
Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD,
but MAX_FD is the number of floppy drives per bus.
Error messages change from
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: Too many IDE buses defined (3 > 2)
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu: too many floppy drives
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu: too many SCSI bus
to
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support if=ide,bus=2,unit=0
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not support if=floppy,bus=2,unit=0
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support if=scsi,bus=1,unit=0
Cc: John Snow <jsnow@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-9-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
If machine initialization code doesn't comply, the block backend
remains unused. This triggers a warning since commit a66c9dc, v2.2.0.
Drives created by default are exempted; use -nodefaults to get rid of
them.
Turn this warning into an error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-8-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We warn when a -drive isn't supported by the machine type (commit
a66c9dc):
$ qemu-system-x86_64 -S -display none -drive if=mtd
Warning: Orphaned drive without device: id=mtd0,file=,if=mtd,bus=0,unit=0
Improve this to point to the offending bit of configuration:
qemu-system-x86_64: -drive if=mtd: warning: machine type does not support if=mtd,bus=0,unit=0
Especially nice when it's hidden behind -readconfig foo.cfg:
qemu-system-x86_64:foo.cfg:140: warning: machine type does not support if=mtd,bus=0,unit=0
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-7-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
These machines have no onboard SCSI HBA, and no way to plug one.
-drive if=scsi therefore cannot work. They do have an onboard IDE
controller (sysbus-ahci), but fail to honor if=ide.
Change their default to if=ide, and add a TODO comment on what needs
to be done to actually honor -drive if=ide.
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-6-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=scsi are meant to be picked up
by machine initialization code: a suitable frontend gets created and
wired up automatically.
if=scsi drives not picked up that way can still be used with -device
as if they had if=none, but that's unclean and best avoided. Unused
ones produce an "Orphaned drive without device" warning.
A few machine types default to if=scsi, even though they don't
actually have a SCSI HBA. This makes no sense. Change their default
to if=none. Affected machines:
* aarch64/arm: realview-pbx-a9 vexpress-a9 vexpress-a15 xilinx-zynq-a9
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <1487153147-11530-5-git-send-email-armbru@redhat.com>
