We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block").
In use_goto_tb, the check for singlestep_enabled is in the
generic translator_use_goto_tb. In s390x_tr_tb_stop, the
check for singlestep_enabled is in the preceding do_debug test.
Which leaves only FLAG_MASK_PER: fold that test alone into
the two callers of use_exit tb.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
split sysemu part of cpu models,
also create a tiny _user.c with just the (at least for now),
empty implementation of apply_cpu_model.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-15-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
all function calls are protected by kvm_enabled(),
so we do not need the stubs.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-13-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we have moved cpu-dump functionality out of helper.c,
we can make the module sysemu-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-11-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The internal.h file is renamed to s390x-internal.h, because of the
risk of collision with other files with the same name.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-7-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
now that we protect all calls to the tcg-specific functions
with if (tcg_enabled()), we do not need the TCG stub anymore.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-6-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
the lack of target_user_arch makes it hard to fully leverage the
build system in order to separate user code from sysemu code.
Provide it, so that we can avoid the proliferation of #ifdef
in target code.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-2-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The element size is located in m5, not in m4. As there is no m4, qemu
currently crashes with an assertion, trying to lookup that field.
Reproduced and tested via GO, which ends up using VMSL once the
Vector enhancements facility is around for verifying certificates with
elliptic curves.
Reported-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/449
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: 8c18fa5b3e ("s390x/tcg: Implement VECTOR MULTIPLY SUM LOGICAL")
Message-Id: <20210705090341.58289-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The FP-to-integer conversion instructions need to set CC 3 whenever
a "special case" occurs; this is the case whenever the instruction
also signals the IEEE invalid exception. (See e.g. figure 19-18
in the Principles of Operation.)
However, qemu currently will set CC 3 only in the case where the
input was a NaN. This is indeed one of the special cases, but
there are others, most notably the case where the input is out
of range of the target data type.
This patch fixes the problem by switching these instructions to
the "static" CC method and computing the correct result directly
in the helper. (It cannot be re-computed later as the information
about the invalid exception is no longer available.)
This fixes a bug observed when running the wasmtime test suite
under the s390x-linux-user target.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210630105058.GA29130@oc3748833570.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This defines 5 new facilities and the new 3931 and 3932 machines.
As before the name is not yet known and we do use gen16a and gen16b.
The new features are part of the full model.
The default model is still empty (same as z15) and will be added
in a separate patch at a later point in time.
Also add the dependencies of new facilities and as a fix for z15 add
a dependency from S390_FEAT_VECTOR_PACKED_DECIMAL_ENH to
S390_VECTOR_PACKED_DECIMAL.
[merged <20210701084348.26556-1-borntraeger@de.ibm.com>]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210622201923.150205-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No change in behaviour, as gdbstub was correctly written to
install and extract the cc value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use s390_cpu_get_psw_mask so that we print the correct
architectural value of psw.mask. Do not print cc_op
unless tcg_enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use this function for debugging, and debug should
not modify cpu state (even non-architectural cpu state) lest
we introduce heisenbugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rename to s390_cpu_set_psw and s390_cpu_get_psw_mask at the
same time. Adjust so that they compile for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
TCG implements everything we need to run basic z14 OS+software.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Everything is wired up and all new instructions are implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
For IEEE functions, we can reuse the softfloat implementations. For the
other functions, implement it generically for 32bit/64bit/128bit -
carefully taking care of all weird special cases according to the tables
defined in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
128 bit -> 64 bit, there is only a single element to process.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
64 bit -> 128 bit, there is only a single final element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In addition to 32/128bit variants, we also have to support the
"Signal-on-QNaN (SQ)" bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case of 128bit, we always have a single element. Add new helpers for
reading/writing 32/128 bit floats.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fortunately, we only need the Doubleword implementation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
... and prepare for 32/128 bit support.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Pass the m5 field via simd_data() and don't provide specialized handlers
for single-element variants.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's rework our macros and simplify. We still need helper functions in
most cases due to the different parameters types.
Next, we'll only have 32/128bit variants for vfi and vfsq, so special
case the others.
Note that for vfsq, the XxC and erm passed in the simd_data() will never be
set, resulting in the same behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's simplify, reworking our handler generation, passing the whole "m5"
register content and not providing specialized handlers for "se", and
reading/writing proper float64 values using new helpers.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use the correct name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case we encounter a NaN, we have to return the smallest possible
number, corresponding to either 0 or the maximum negative number. This
seems to differ from IEEE handling as implemented in softfloat, whereby
we return the biggest possible number.
While at it, use float32_to_uint64() in the CLGEB handler.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With commit 0280b3eb7c ("s390x/kvm: use cpu model for gscb on
compat machines"), we removed any calls to kvm_s390_get_gs()
in favour of a different mechanism.
Let's remove the unused kvm_s390_get_gs(), and with it the now
unneeded cap_gs as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210602125050.492500-1-cohuck@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_get_crash_info() is called on GUEST_PANICKED events,
which only occur in system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-18-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hitting an uretprobe in a s390x TCG guest causes a SIGSEGV. What
happens is:
* uretprobe maps a userspace page containing an invalid instruction.
* uretprobe replaces the target function's return address with the
address of that page.
* When tb_gen_code() is called on that page, tb->size ends up being 0
(because the page starts with the invalid instruction), which causes
virt_page2 to point to the previous page.
* The previous page is not mapped, so this causes a spurious
translation exception.
tb->size must never be 0: even if there is an illegal instruction, the
instruction bytes that have been looked at must count towards tb->size.
So adjust s390x's translate_one() to act this way for both illegal
instructions and instructions that are known to generate exceptions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210416154939.32404-2-iii@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We can remove PAGE_WRITE when (internally) marking a page read-only
because it contains translated code. This can get confused when we are
executing signal return code on signal stacks.
Fixes: e56552cf07 ("target/s390x: Implement the MVPG condition-code-option bit")
Found-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-id: 20210422154427.13038-1-alex.bennee@linaro.org
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The PoP states:
When EDAT-1 does not apply, and a program interruption due to a
page-translation exception is recognized by the MOVE PAGE
instruction, the contents of the R1 field of the instruction are
stored in bit positions 0-3 of location 162, and the contents of
the R2 field are stored in bit positions 4-7.
If [...] an ASCE-type, region-first-translation,
region-second-translation, region-third-translation, or
segment-translation exception was recognized, the contents of
location 162 are unpredictable.
So we have to write r1/r2 into the lowcore on page-translation
exceptions. Simply handle all exceptions inside our mvpg helper now.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210315085449.34676-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the CCO bit is set, MVPG should not generate an exception but
report page translation faults via a CC code.
Create a new helper, access_prepare_nf, which can use probe_access_flags
in non-faulting mode, and then handle watchpoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Added logic to still inject protection exceptions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
[david: Look at env->tlb_fill_exc to determine if there was an exception]
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210315085449.34676-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The single-frame z15 is called "z15 T02" (and the multi-frame z15
"z15 T01").
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210311132746.1777754-1-cohuck@redhat.com>
legacy_s390_alloc() was required for dealing with the absence of the ESOP
feature -- on old HW (< gen 10) and old z/VM versions (< 6.3).
As z/VM v6.2 (and even v6.3) is no longer supported since 2017 [1]
and we don't expect to have real users on such old hardware, let's drop
legacy_s390_alloc().
Still check+report an error just in case someone still runs on
such old z/VM environments, or someone runs under weird nested KVM
setups (where we can manually disable ESOP via the CPU model).
No need to check for KVM_CAP_GMAP - that should always be around on
kernels that also have KVM_CAP_DEVICE_CTRL (>= v3.15).
[1] https://www.ibm.com/support/lifecycle/search?q=z%2FVM
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210303130916.22553-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already have the 'run' variable holding 'cs->kvm_run' value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210303182219.1631042-3-philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Measurement Block Origin inside the SCHIB is used when
Measurement Block format 1 is in used and must be aligned
on 64 bytes otherwise an operand exception is recognized
when issuing the Modify Sub CHannel (MSCH) instruction.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1613741973-3711-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is a compiler warning with GCC 9.3 when compiling with
the -fsanitize=thread compiler flag:
In function 'strncpy',
inlined from 's390x_write_elf64_notes' at ../target/s390x/arch_dump.c:219:9:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error:
'__builtin_strncpy' specified bound 8 equals destination size
[-Werror=stringop-truncation]
Since the name should always be NUL-terminated, let's use g_strlcpy() to
silence this warning. And while we're at it, also add an assert() to make
sure that the provided names always fit the size field (which is fine for
the current callers, the function is called once with "CORE" and once with
"LINUX" as a name).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210205093921.848260-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Secure execution (aka protected virtualization) guests cannot be
migrated at the moment. If the unpack facility is provided in the cpu
model, a guest may choose to transition to secure mode, making the
guest unmigratable at that point in time. If the machine was explicitly
started with --only-migratable, we would get a failure only when the
guest actually tries to transition; instead, explicitly disallow the
unpack facility if --only-migratable was specified to avoid late
surprises.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210125135332.181324-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
make it consistently SOFTMMU-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: make the field presence in cpu.h unconditional, removing the ifdefs]
Message-Id: <20210204163931.7358-12-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using strncpy with length equal to the size of target array, GCC 11
reports following warning:
warning: '__builtin_strncpy' specified bound 256 equals destination size [-Wstringop-truncation]
We can prevent this warning by using strpadcpy that copies string
up to specified length, zeroes target array after copied string
and does not raise warning when length is equal to target array
size (and ending '\0' is discarded).
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <6f86915755219cf6a671788075da4809b57f7d7b.1610607906.git.mrezanin@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In our EXECUTE fast path, we have to ignore the content of r0, if
specified by b1 or b2.
Fixes: d376f123c7 ("target/s390x: Re-implement a few EXECUTE target insns directly")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Using get_address() with register identifiers comming from an "r" field
is wrong: if the "r" field designates "r0", we don't read the content
and instead assume 0 - which should only be applied when the register
was specified via "b" or "x".
PoP 5-11 "Operand-Address Generation":
"A zero in any of the B1, B2, X2, B3, or B4 fields indicates the absence
of the corresponding address component. For the absent component, a zero
is used in forming the intermediate sum, regardless of the contents of
general register 0. A displacement of zero has no special significance."
This BUG became visible for CSPG as generated by LLVM-12 in the upstream
Linux kernel (v5.11-rc2), used while creating the linear mapping in
vmem_map_init(): Trying to store to address 0 results in a Low Address
Protection exception.
Debugging this was more complicated than it could have been: The program
interrupt handler in the kernel will try to crash the kernel: doing so, it
will enable DAT. As the linear mapping is not created yet (asce=0), we run
into an addressing exception while tring to walk non-existant DAT tables,
resulting in a program exception loop.
This allows for booting upstream Linux kernels compiled by clang-12. Most
of these cases seem to be broken forever.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
RISBHG is broken and currently hinders clang-11 builds of upstream kernels
from booting: the kernel crashes early, while decompressing the image.
[...]
Kernel fault: interruption code 0005 ilc:2
Kernel random base: 0000000000000000
PSW : 0000200180000000 0000000000017a1e
R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:2 PM:0 RI:0 EA:3
GPRS: 0000000000000001 0000000c00000000 00000003fffffff4 00000000fffffff0
0000000000000000 00000000fffffff4 000000000000000c 00000000fffffff0
00000000fffffffc 0000000000000000 00000000fffffff8 00000000008e25a8
0000000000000009 0000000000000002 0000000000000008 000000000000bce0
One example of a buggy instruction is:
17dde: ec 1e 00 9f 20 5d risbhg %r1,%r14,0,159,32
With %r14 = 0x9 and %r1 = 0x7 should result in %r1 = 0x900000007, however,
results in %r1 = 0.
Let's interpret values of i3/i4 as documented in the PoP and make
computation of "mask" only based on i3 and i4 and use "pmask" only at the
very end to make sure wrapping is only applied to the high/low doubleword.
With this patch, I can successfully boot a v5.11-rc2 kernel built with
clang-11, and gcc builds keep on working.
Fixes: 2d6a869833 ("target-s390: Implement RISBG")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like something went wrong whiel touching that line. Instead of "r1"
we need a new temporary. Also, we have to pass MO_TEQ, to indicate that
we are working with 64-bit values. Let's revert these changes.
Fixes: ff26d287bd ("target/s390x: Improve cc computation for ADD LOGICAL")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that SUB LOGICAL outputs borrow, we can use that as input directly.
It also means we can re-use CC_OP_SUBU and produce an output borrow
directly from SUB LOGICAL WITH BORROW.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the carry-out.
Carry-out and borrow-out are inverses, so are trivially converted.
With tcg ops, it is easier to compute borrow-out than carry-out, so
save result and borrow-out rather than the inputs.
Borrow-out for 64-bit inputs is had via tcg_gen_sub2_i64 directly
into cc_src. Borrow-out for 32-bit inputs is had via extraction
from a normal 64-bit sub (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that ADD LOGICAL outputs carry, we can use that as input directly.
It also means we can re-use CC_OP_ADDU and produce an output carry
directly from ADD LOGICAL WITH CARRY.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the
carry-out. So save those things rather than the inputs.
Carry-out for 64-bit inputs is had via tcg_gen_add2_i64 directly
into cc_src. Carry-out for 32-bit inputs is had via extraction
from a normal 64-bit add (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There's no VSIE support for a protected guest, so let's better not
advertise it and its support facilities.
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201211105109.2913-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When running device-introspect-test, a memory leak occurred in the s390_cpu_initfn
function, this patch use timer_free() in the finalize function to fix it.
ASAN shows memory leak stack:
Direct leak of 3552 byte(s) in 74 object(s) allocated from:
#0 0xfffeb3d4e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xfffeb36e6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaad51a8f9c4 in timer_new_full qemu/include/qemu/timer.h:523
#3 0xaaad51a8f9c4 in timer_new qemu/include/qemu/timer.h:544
#4 0xaaad51a8f9c4 in timer_new_ns qemu/include/qemu/timer.h:562
#5 0xaaad51a8f9c4 in s390_cpu_initfn qemu/target/s390x/cpu.c:304
#6 0xaaad51e00f58 in object_init_with_type qemu/qom/object.c:371
#7 0xaaad51e0406c in object_initialize_with_type qemu/qom/object.c:515
#8 0xaaad51e042e0 in object_new_with_type qemu/qom/object.c:729
#9 0xaaad51e3ff40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
#10 0xaaad51910518 in qdev_device_help qemu/softmmu/qdev-monitor.c:283
#11 0xaaad51911918 in qmp_device_add qemu/softmmu/qdev-monitor.c:801
#12 0xaaad51911e48 in hmp_device_add qemu/softmmu/qdev-monitor.c:916
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201204081209.360524-4-ganqixin@huawei.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Control Program Name Code (CPNC) portion of the diag318
info must be set within the SIE block of each VCPU in the
configuration. The handler will iterate through each VCPU
and dirty the diag318_info reg to be synced with KVM on a
subsequent sync_regs call.
Additionally, the diag318 info resets must be handled via
userspace. As such, QEMU will reset this value for each
VCPU during a modified clear, load normal, and load clear
reset event.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20201113221022.257054-1-walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are void * pointers that get casted to enums, in cpu_models.c
Such casts can result in a small integer type and are caught as
warnings with clang, starting with version 11:
Clang 11 finds a bunch of spots in the code that trigger this new warnings:
../qemu-base/target/s390x/cpu_models.c:985:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1002:21: error: cast to smaller integer type 'S390Feat' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390Feat feat = (S390Feat) opaque;
^~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1036:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
../qemu-base/target/s390x/cpu_models.c:1057:27: error: cast to smaller integer type 'S390FeatGroup' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
S390FeatGroup group = (S390FeatGroup) opaque;
^~~~~~~~~~~~~~~~~~~~~~
4 errors generated.
Avoid this warning by casting the pointer to uintptr_t first.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-3-dbuono@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds some gen_io_start() calls to allow execution
of s390x targets in icount mode with -smp 1.
It enables deterministic timers and record/replay features.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <160455551747.32240.17074484658979970129.stgit@pasha-ThinkPad-X280>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
