The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable KVM support for MIPS in the build system.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hi5L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a special build of u-boot tailored for the e500 platforms we
emulate. It is based on the current version of upstream u-boot which
contains all the code necessary to drive our QEMU provided machines.
Signed-off-by: Alexander Graf <agraf@suse.de>
Those options were not enabled by default, even when the build
environment would have supported them, so the corresponding
code was not compiled in normal test builds like on build bots.
[Building quorum by default "broke" qemu-iotests ./check 081. It turns
out the 081.out master output was just bitrotted. Fix this by updating
the error message.
--Stefan]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* build fixes
* improvements to strace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=yKuf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-bsd-user-20140611' into staging
bsd-user queue:
* build fixes
* improvements to strace
# gpg: Signature made Wed 11 Jun 2014 15:23:40 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-bsd-user-20140611:
bsd-user: Fix syscall format, add strace support for more syscalls
bsd-user: Implement strace support for thr_* syscalls
bsd-user: Implement strace support for extattr_* syscalls
bsd-user: Implement strace support for __acl_* syscalls
bsd-user: Implement strace support for print_ioctl syscall
bsd-user: Implement strace support for print_sysctl syscall
bsd-user: GPL v2 attribution update and style
bsd-user: add HOST_VARIANT_DIR for various *BSD dependent code
exec: replace ffsl with ctzl
vhost: replace ffsl with ctzl
xen: replace ffsl with ctzl
util/qemu-openpty: fix build with musl libc by include termios.h as fallback
bsd-user/mmap.c: Don't try to override g_malloc/g_free
util/hbitmap.c: Use ctpopl rather than reimplementing a local equivalent
bsd-user: refresh freebsd system call numbers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make configure detect gtk x11 backend and link libX11 then. Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime). Our gtk ui code should build and run fine on
any platform now.
This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a3482b.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This change adds HOST_VARIANT_DIR so the various BSD OS dependent
code can be separated into its own directories rather than
using #ifdef's.
This may also allow an BSD variant OS to host another BSD variant's
executable as a target.
Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check for big or little endianness relies on grep reporting
match/non-match on the generated binary. If the user specified
--binary-files=without-match in their GREP_OPTIONS, this will fail.
Let's follow what autoconf does and unset GREP_OPTIONS and CLICOLOR_FORCE
at the beginning of the script.
Reported-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'-lrt' flag duplication/incorrect order
would cause 'undefined reference to clock_gettime' error during compilation time.
Before fix:
... -o qemu-bridge-helper qemu-bridge-helper.o -lrt -pthread -lgthread-2.0 -lrt -lglib-2.0
After fix:
... -o qemu-bridge-helper qemu-bridge-helper.o -pthread -lgthread-2.0 -lrt -lglib-2.0
Reference:
http://hi.baidu.com/sanitywolf/item/7a8b69c1e76dd220a0b50ab1
Signed-off-by: Rick Liu <yrliu.ca@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJTgup0AAoJEL7lnXSkw9fb2z0IAJVnjV1b2xGqWrbBFPvm1zdT
8vSKdW77kvtL1Usx2xLLqjn+xfJsmDwiIfEZvAEsma2s8ubVkz9hiQylq9jdSxGi
YR0i8xUeqeF6n2RttzEw9rENHa9qZllxGpBQyIcjxo+7hcgVkj0r15x+JAIkeIpV
6iCx1mqAC5QJbHrIN1eO5ymDZvsq37Q8S9jRU0hJ18MwFfKc1z9T38D+VytnW9xK
l5Qg3JEf9HBI9zTChfRDImTDXNV2Ehm0nK5/8noD0mjp06p/DF/HN+BDsXM/0cPc
aWmoVNa0KGCqXvmI+F/7RWBzxaOkH9UXDrf1ed10Io6Nsp0nGfxWJHEA9to/fyo=
=86oR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-26' into staging
trivial patches for 2014-05-26
# gpg: Signature made Mon 26 May 2014 08:17:08 BST using RSA key ID A4C3D7DB
# gpg: Can't check signature: public key not found
* remotes/mjt/tags/trivial-patches-2014-05-26: (23 commits)
libcacard: remove useless initializers
net: cadence_gem: Fix top comment
bsd-user: replace fprintf(stderr, ...) with error_report()
audio: replace fprintf(stderr, ...) with error_report() in audio
libcacard: fix wrong array expansion logic
libcacard/vcard_emul_nss: Drop a redundant conditional
libcacard: Convert two leftover realloc() to GLib
libcacard/vreader: Tighten assertion to clarify intent
libcacard/vreader: Drop broken recovery from failed assertion
libcacard: Plug memory leaks around vreader_get_reader_list()
libcacard/vscclient: Bury some dead code
vl: fix 'name' option to work with -readconfig
configure: Put tempfiles in a subdir of the build directory
dma-helpers: avoid calling dma_bdrv_unmap() twice
arch_init: replace fprintf(stderr, ...) with error_report()
pci: move dereferencing of root only after verifying valid root pointer
jazz_led: Add missing break in switch case
bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc
configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailable
nbd: Miscellaneous typo fixes.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Choosing good addresses for them means we can use JAL for helper calls.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.
Put all our temporary files in a single temporary directory created
as a subdirectory of the build directory, so we can easily clean it up,
and don't need fragile or complicated code for creation to avoid it
clashing with temporary directories from other instances of QEMU
configure or being subject to attack from adversaries who can write
to /tmp.
Since the temporaries now live in the build tree, we have no
need to jump through hoops with a trap handler to try to remove
them when configure exits; this fixes some weird bugs where hitting
^C during a configure run wouldn't actually make it stop, because
we would run the trap handler but then not stop. (It is possible
to get the trap handler semantics right but it is convoluted largely
because of bugs in dash, so it is simpler to just avoid it.)
Note that "temporary files go in the build directory, not /tmp" is
the way autoconf behaves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure option --with-gtkabi=3.0 is still supported, but no longer
needed when GTK+-2.0 is missing. When no GTK+ ABI is selected by the
user, configure first tries 2.0, then 3.0.
For some platforms (e.g. Windows) newer binaries of GTK+ are only
available for GTK+ 3.0. Now building on these platforms is a little bit
easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTdOpIAAoJEK0ScMxN0CebAJUIAKmxOlk39ukPD3hn8Ik1MCr8
byJLcCZrdTzKMAjiovQIAmTmMQ4dba0YI6E+G8H4Z21u74P3fgUbhlt3SHpeMNch
kbfIUJ4PYAar9wze858rD4BANOOMB3qLjkE3LH8WF70S8S7yTc7fsCrDqS0+qG0P
+fFHdoHT1w93O5V07ELI9xCDEeCH7gE6znD0RLAc00SNErDWBCZKIpgT45K0bJmG
1uX8nuUHx6U8TUpjLzwUomJc5o3OeutbF3H2XlVQdzbPbBchkjeHEZ9jv2h2q6bC
e3xVzwBL7IP3vVEMLT6WWkNtI3XO1erDOjzbw/4F6hqpMOFy92Lpmpib8Q2W+S0=
=glsl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-s390-20140515' into staging
tcg/s390 updates
# gpg: Signature made Thu 15 May 2014 17:24:40 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/pull-tcg-s390-20140515:
tcg-s390: Implement direct chaining of TBs
tcg-s390: Don't force -march=z990
tcg-s390: Improve setcond
tcg-s390: Allow immediate operands to add2 and sub2
tcg-s390: Implement tcg_register_jit
tcg-s390: Use more risbg in the tlb sequence
tcg-s390: Move ldst helpers out of line
tcg-s390: Convert to new ldst opcodes
tcg-s390: Integrate endianness into TCGMemOp
tcg-s390: Convert to TCGMemOp
tcg-s390: Fix off-by-one in wraparound andi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we still require the LONG DISPLACEMENT facility, defaults
have moved on since then. Don't override the system compiler,
whose default may be set to z9-109 or later.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reverts commit f915db07ef.
This commit is broken because it does not account for the
build tree and the source tree being different, and can cause
build failures for out-of-tree builds. Revert it until we can
identify a better solution to the problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org
Acked-by: Kevin Wolf <kwolf@redhat.com>
* remotes/bonzini/configure:
libcacard: remove libcacard-specific CFLAGS and LIBS from global vars
build: simplify and fix fix-obj-vars
build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax
build: add support for per-object -cflags and -libs to all rules
Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)
Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)
Makefile: strip tools and modules too
build: simplify Makefile.target around unnest-vars invocations
build: simplify Makefile.target a bit, use just one rule for softmmu
build: Fix per-object variables for Makefile.target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently all what's needed for single file libcacard/vcard_emul_nss.c
(libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes)
together with the libs is added to global QEMU_CFLAGS and libs_softmmu.
Use the cflags only where really used (for two mentioned files), and
libs only where needed.
While at it, rename variables to better reflect reality: libcacard_*
is really nss_*.
This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs
(ditto for _cflags). But in order to fix it, some more preparations
should be made first. So add a FIXME comment.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU's iotests rely on /usr/bin/env to start the correct
Python (that is, at least Python 2.4, but not 3). On systems where
Python 3 is the default, the user has no clean way of making the iotests
use the correct binary.
This commit makes the iotests use the Python selected by configure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTamnaAAoJEJykq7OBq3PIvIIH/jX2XsOLfCh9GCKxTrFU3mS7
5/0z9bObS/vWXXVun6DDlrgAUURlmhsm9jiMqpViNHf4AuNCgDkfwrFbrhmd8YPA
+5Pq4jcpCKaDol/E63DMlUIwMpTwlW46rDoXfLGzHQDW0WBduSrL0qUYjJg0wMOj
1LCTAQSxNDeumUYfsRWPxThSN0gXgPNIbR5B5OQi2WqGiEB36+nGWdgMzJ34ZHDO
xql/uLkJsXmX2WFJX7Hr9upxXikRwC0K4B9yTI8ozq7fUQ1hg4WvJ1B/3UxJRv+Y
QTvqhQ6suPfjoypohdMO7FDITZpFzkimfcGgBje7bBifz6CpluC0ppQyKVC+ic4=
=kUXD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Wed 07 May 2014 18:14:02 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
configure: Show trace output file conditionally
trace: [tracetool] Minimize the amount of per-backend code
trace: [simple] Bump up log version number
trace: [tracetool] Change format docs to point to the generated file
trace: [tracetool] Show list of frontends and backends sorted by name
trace: [tracetool] Cosmetic changes
trace: [tracetool] Spacing changes
trace: [tracetool] Add methods 'Event.copy' and 'Arguments.copy'
trace: [tracetool] Add method 'Event.api' to build event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e26110cfc6 added a check for shacmd to create a hash
for modules. This check in configure is using bash construct &>
to redirect both stdout and stderr, which does fun things on some
shells. Get rid of it, use standard redirection instead.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
When source directory can be arrived at by two paths,
configure might misdetect an out of tree build.
The simplest way to trigger the problem is running
configure using a full path. E.g. (<firstpath> refers to qemu source
tree):
ln -s <firstpath> <secondpath>
cd <firstpath>
<secondpath>/configure
A more practical way is when make runs configure automatically:
1. cd <firstpath>/; ./configure
SRC_PATH=<firstpath>/ is written into config_host.mak
2. cd <secondpath>/; touch configure; make
make now runs <firstpath>/configure, so configure
assumes it's an out of tree build
When this happens configure overwrites parts of
the current tree with symlinks.
Make the test more robust: look for configure
in the current directory.
If there - we know it's a source build!
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reconfiguring with a different --with-gtkabi or --with-sdlabi doesn't
trigger a remake. Generate an (unused) CONFIG_GTKABI/CONFIG_SDLABI
so config-host.h will actually give 'make' something to trigger on.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Old:
There are two paths to show help and exit 1, one is with "-h" or
"--help", one is with invalid options.
New:
Show help and exit 0 for --help.
On invalid option, don't show the long help and bury the early "ERROR:"
line, just give a message pointing to --help.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The compiler flag -Werror is printed (or not printed) as any other
compiler flag which is part of QEMU_CFLAGS.
Therefore an extra output line for -Werror is redundant and can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help text for the --enable-debug-info and --disable-debug-info
command line options was misindented: delete the stray extra space
and bring it in to line with everything else.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since we use the -fstack-protector argument at both compile and
link time in the build, we must check that it works with both
a compile and a link:
* MacOSX only fails in the compile step, not linking
* some gcc cross environments only fail at the link stage (if they
require a libssp and it's not present for some reason)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1397232832-32301-1-git-send-email-peter.maydell@linaro.org
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
MacOSX clang silently swallows unrecognized -f options when doing a link
with '-framework' also on the command line, so to detect support for
the various -fstack-protector options we must do a plain .c to .o compile,
not a complete compile-and-link.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1397041487-28477-1-git-send-email-peter.maydell@linaro.org
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTNWRMAAoJECgfDbjSjVRp6CoH/A3iLi+jkV4EhQQzU8U6vOmi
PIV71600rZd29u4hk6w5pyev6yyXSBwatmWk+vzHvINUIcc22KUue+773nXPW/fH
3oIgTwjKndE98V5vTSeOgOdD7iFuWlcgHQHLXXMsgpY1hVMS/1kidZdb+36o8euI
kdE+AxYGXS8Z3oBRFfROpT4v0UZ17qIaL4tqA4JJWMh/A3Qp3HY+ffU3ODAvKSQw
KWVWmKvbh82I25HOvALoMwtu26x48jhzu586pHBuEsHgTJKKBrAUdWph+2f1eSC+
xTgduKWEgK6Z9dCYDQwDaM8CqNzjqVzfgRu0RCSHtgTxCWaIN3dQbxEFi7WQ2Yo=
=dfqJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libnfs prior to 1.9.3 contains a bug that will report
wrong transfer sizes if the file offset grows beyond 4GB
and RPC responses are received out of order. this
error is not detectable and fixable in qemu.
additionally 1.9.3 introduces support for handling short
read/writes in general and takes care of the necessary
retransmissions internally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Those versions don't fully support __int128_t.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTHvMwAAoJECgfDbjSjVRp2SIH/Rh5X1U+tUjr0xnvWllXTgdP
ixot7AxXO2UkmPqhyAPV/oEr/3xBFyp8C8ZysQzaHsUqDyq40DtkKp+UWvG6EjpY
3Ser+wA9NzsT67ixtEIN2z1qnO7l29ErggS8EfTOh7gyFJzSKN8x3GV2ENB/FBJW
k0LSO7aJ0rmTdg63u9T3RIctKPbtCBO8wlE6wuS461pBshYNr6aVkMWDY9bVpx/f
ol/aoJs7xaPkJs1qFzOfOisYi3LeBZR4O9gRRixqzwJtwWl5rMG3y/oBxbYDfyZw
NbP7zFAWCj/YYgG0U8L9SR4P28n65FoULAvQ9CRY1+fF7Ozwj0SzoU2Ld6fvINw=
=VRRB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,test bug fixes
More small fixes: the issues annoy developers so
I thought they are worth fixing quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 11 Mar 2014 11:27:44 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
acpi-test: update expected SSDT files
acpi-build: don't access unaligned addresses
q35: Correct typo BRDIGE -> BRIDGE
configure: don't modify .status on error
pc: avoid duplicate names for ROM MRs
loader: rename in_ram/has_mr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
./configure --help
make
will try to re-run configure with --help
which isn't what was intended.
The reason is that config.status was written
even on configure error.
Defer writing config.status until configure
has completed successfully.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instead of
spice support no (/)
configure now prints
spice support no
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).
This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:
Undefined symbols for architecture x86_64:
"_cur_mon", referenced from:
_error_vprintf in libqemuutil.a(qemu-error.o)
_error_printf in libqemuutil.a(qemu-error.o)
_error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
_error_print_loc in libqemuutil.a(qemu-error.o)
_error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64
in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).
In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org
gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:
1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.
2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.
3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.
4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: Andreas Färber <afaerber@suse.de>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=1X50
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140226' into staging
target-arm queue:
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
# gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits)
dma/pl330: implement dmaadnh instruction
dma/pl330: Fix buffer depth
dma/pl330: Add event debugging printfs
dma/pl330: Rename parent_obj
dma/pl330: printf format type sweep.
dma/pl330: Fix misleading type
dma/pl330: Delete overly verbose debug printf
target-arm: Add support for AArch32 ARMv8 CRC32 instructions
include/qemu/crc32c.h: Rename include guards to match filename
target-arm: Add utility function for checking AA32/64 state of an EL
target-arm: Implement AArch64 view of CPACR
target-arm: A64: Implement MSR (immediate) instructions
target-arm: Store AIF bits in env->pstate for AArch32
target-arm: A64: Implement WFI
target-arm: Get MMU index information correct for A64 code
target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI
target-arm: Implement AArch64 dummy breakpoint and watchpoint registers
target-arm: Implement AArch64 ID and feature registers
target-arm: Implement AArch64 generic timers
target-arm: Implement AArch64 MPIDR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTDJtxAAoJEJykq7OBq3PIEBAH/0Fh1TUsHpLGwtVC+HObl4HF
19KJpaXfG3L1x5pV4qbRvsmgXDNjnm8sSAbAvINn5uKJqk371qshvgssaIyLOA/o
VD+9lR1mwE9mwiktCfFniddoZmTsMyGxsbE4i1dZAxsGuuiJ3x2zRotpQCLjmWMJ
OSIdy1v657tR0EnhjI19g4fNvCpfOwX3tvMt20vgL6/x9AuNjMfFeP6S/KNuxBBC
6vflVNmN0AIc/tIbR5bql5/wcDixJcxobFXHxAmIbaaJTNtFXq0PNpo0kfLi5Zzx
s6iVoYVXNMx1xqpegBEVLyIvtcX7SCggO8FT+bhzaOfPVL8NaSXRJMRjH22V+D0=
=UA+s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
virtio-net: use qemu_get_queue() where possible
vhost_net: use offload API instead of bypassing it
net: remove implicit peer from offload API
net: Disable netmap backend when not supported
net: add offloading support to netmap backend
net: make tap offloading callbacks static
net: virtio-net and vmxnet3 use offloading API
net: TAP uses NetClientInfo offloading callbacks
net: extend NetClientInfo for offloading
net: change vnet-hdr TAP prototypes
opencores_eth: flush queue whenever can_receive can go from false to true
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTBNDcAAoJEJykq7OBq3PISEMIAIrJN9RTfpeAaUY4bSj9Q283
ReAgkTbe1yhuvik8E3sN9OOm24EfD9o2mE3Io2Jq1tslgM0yDXcuBoIT6rrmwF3L
MLRtE89JIStv1JbNyeorTgS8N/6kY0evKkmG8kskwHS3QVCKo3+OsPz7D6JNQrdA
KQNJZa19DVIfdgBGCD1HuGOVgCIe3rrGOc16/XvPuK3CXACyvfEO7B/1YStSXBu5
QmtccRMzCo7Xt6PwAvq4RclNa45lnjVvv0lcyApdajn/zFGBzXmK19NrMhDDHQC+
fLS3fmWQCo3dFeVwoyfUhamt3wxD3Mpp5PYEytJ5EOmv+UPuCQ1/8SQJjxxKESo=
=sVTF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Wed 19 Feb 2014 15:42:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix typo in "offset"
Add ust generated files to .gitignore
Update documentation for LTTng ust tracing
Adapt Makefiles to the new LTTng ust interface
Modified the tracetool framework for LTTng 2.x
Fix configure script for LTTng 2.x
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Adjust TMPO and added TMPB, TMPL, and TMPA. libtool needs the names
to be fixed (TMPB).
Add new functions do_libtool and libtool_prog.
Add check for broken gcc and libtool.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that. Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:
>From the OpenBSD buildbots..
Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC
Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.
Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XErB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-anthony' into staging
Block patches
# gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-anthony:
block: Fix 32 bit truncation in mark_request_serialising()
blkdebug: Don't leak bs->file on failure
block: Don't call ROUND_UP with negative values
block: bdrv_aligned_pwritev: Assert overlap range
block: Fix memory leaks in bdrv_co_do_pwritev()
raw: Fix BlockLimits passthrough
qemu-iotests: add test for qcow2 preallocation with different cluster sizes
qcow2: check for NULL l2meta
qcow2: fix offset overflow in qcow2_alloc_clusters_at()
qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
block/iscsi: always fill bs->bl.opt_transfer_length
block: Fail gracefully with missing filename
qemu-iotests: enable support for NFS protocol
qemu-iotests: enable test 016 and 025 to work with NFS protocol
qemu-iotests: blacklist test 020 for NFS protocol
qemu-iotests: change _supported_proto to file for various tests
block: add native support for NFS
qemu-iotest: Make 077 raw-only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.
NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[¶m2=value2[&...]]]
For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2
You need LibNFS from Ronnie Sahlberg available at:
git://github.com/sahlberg/libnfs.git
for this to work.
During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.
Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.
For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
https://raw.github.com/sahlberg/libnfs/master/README
Supported by qemu are the uid, gid and tcp-syncnt URL parameters.
LibNFS currently support NFS version 3 only.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The help message uses $python and displays its value, so that macro
should be tested and set early.
With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.
The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:
@@ -8,7 +8,7 @@
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [/usr/gnemul/qemu-%M]
--target-list=LIST set target list (default: build everything)
- Available targets: alpha-softmmu arm-softmmu
+ Available targets: alpha-softmmu arm-softmmu
cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
microblaze-softmmu microblazeel-softmmu mips-softmmu
mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSkzcXAAoJECgfDbjSjVRprVkIAJI0t8gfgichVVthsXPjCEI+
WlibVjN+BDt0S/y8sb5H43JAJS9JN6myi9rSNc2t2bdEynVJEDpGL9BZG/9RMjZ3
ekhyQsDVu8jzAseiFicBTtHt31RSjSyGsTAFks28FaB2p3DxYT6DY2enJ4CrtLR0
CCqMmvBWJY/hLjdiuYyuAKNrTSKkmdlddUWJyI5lWXJQbP6dx3cjF6OrUnCngBFG
TJ6Oh9lWC2IWf86P+73JtwpkTkm41shyMBz4MTAY0AvriKBzn27qTrP9BwL5rfaM
Tsaoc9Y81+4bd5EiDo3NpA2pAyCF9H+oeR1Zblce6p60wOKKfGvwT65KOH7fc1M=
=bdsX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
