When compiling for windows-arm64 using clang-15, it reports a sometimes
uninitialized variable. This seems to be a false positive, as a default
case guards switch expressions, preventing to return an uninitialized
value, but clang seems unhappy with assert(0) definition.
Change code to g_assert_not_reached() fix the warning.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221153006.20300-5-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-5-philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-5-philmd@linaro.org>
Note that the previous direct reference to reserve_val,
- tcg_gen_ld_i64(t1, cpu_env, (ctx->le_mode
- ? offsetof(CPUPPCState, reserve_val2)
- : offsetof(CPUPPCState, reserve_val)));
was incorrect because all references should have gone through
cpu_reserve_val. Create a cpu_reserve_val2 tcg temp to fix this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221112061122.2720163-2-richard.henderson@linaro.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In addition, use tcg_enabled instead of !kvm_enabled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adds checks to the hashst and hashchk instructions to only execute if
enabled by the relevant aspect in the DEXCR and HDEXCR.
This behaviour is guarded behind TARGET_PPC64 since Power10 is
currently the only implementation which has the DEXCR.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Message-Id: <20221220042330.2387944-3-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Define the DEXCR and HDEXCR as special purpose registers.
Each register occupies two SPR indicies, one which can be read in an
unprivileged state and one which can be modified in the appropriate
priviliged state, however both indicies refer to the same underlying
value.
Note that the ISA uses the abbreviation UDEXCR in two different
contexts: the userspace DEXCR, the SPR index which can be read from
userspace (implemented in this patch), and the ultravisor DEXCR, the
equivalent register for the ultravisor state (not implemented).
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221220042330.2387944-2-nicholas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's not leave developers in the dark where this log message comes
from.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
kvm_ppc.h is missing various declarations from "cpu.h":
target/ppc/kvm_ppc.h:128:40: error: unknown type name 'CPUPPCState'; did you mean 'CPUState'?
static inline int kvmppc_get_hypercall(CPUPPCState *env,
^~~~~~~~~~~
CPUState
include/qemu/typedefs.h:45:25: note: 'CPUState' declared here
typedef struct CPUState CPUState;
^
target/ppc/kvm_ppc.h:134:40: error: unknown type name 'PowerPCCPU'
static inline int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
^
target/ppc/kvm_ppc.h:285:38: error: unknown type name 'hwaddr'
hwaddr ptex, int n)
^
target/ppc/kvm_ppc.h:220:15: error: unknown type name 'target_ulong'
static inline target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
^
target/ppc/kvm_ppc.h:286:38: error: unknown type name 'ppc_hash_pte64_t'
static inline void kvmppc_read_hptes(ppc_hash_pte64_t *hptes,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the ppc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-14-peter.maydell@linaro.org
Kowshik reported that building qemu with GCC 12.2.1 for 'ppc64-softmmu'
target is failing due to following build warnings:
<snip>
../target/ppc/cpu_init.c:7018:13: error: 'ppc_restore_state_to_opc' defined but not used [-Werror=unused-function]
7018 | static void ppc_restore_state_to_opc(CPUState *cs,
<snip>
Fix this by wrapping these function definitions in 'ifdef CONFIG_TCG' so that
they are only defined if qemu is compiled with '--enable-tcg'
Reported-by: Kowshik Jois B S <kowsjois@linux.ibm.com>
Fixes: 61bd1d2942 ("target/ppc: Convert to tcg_ops restore_state_to_opc")
Fixes: 670f1da374 ("target/ppc: Implement hashst and hashchk")
Fixes: 53ae2aeb94 ("target/ppc: Implement hashstp and hashchkp")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1319
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Kowshik Jois B S <kowsjois@linux.vnet.ibm.com>
Message-Id: <20221116131743.658708-1-vaibhav@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 47e83d9107 ended up unintentionally changing the control flow
of ppc_radix64_process_scoped_xlate(). When guest_visible is false,
it must not raise an exception, even if the radix configuration is
not valid.
This regression prevented Linux boot in a nested environment with
L1 using TCG and emulating KVM (cap-nested-hv=on) and L2 using
KVM. L2 would hang on Linux's futex_init(), when it tested how a
futex_atomic_cmpxchg_inatomic() handled a fault, because L1 would
start a loop of trying to perform partition scoped translations
and raising exceptions.
Fixes: 47e83d9107 ("target/ppc: Improve Radix xlate level validation")
Reported-by: Victor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Tested-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221028183617.121786-1-leandro.lupori@eldorado.org.br>
[danielhb: use %"PRIu64" to print 'nls']
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Profiling QEMU during Fedora 35 for PPC64 boot revealed that
6.39% of total time was being spent in helper_insns_inc(), on a
POWER9 machine. To avoid calling this helper every time PMCs had
to be incremented, an inline implementation of PMC5 increment and
check for overflow was developed. This led to a reduction of
about 12% in Fedora's boot time.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221025202424.195984-4-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add 2 new PMC related HFLAGS:
- HFLAGS_PMCJCE - value of MMCR0 PMCjCE bit
- HFLAGS_PMC_OTHER - set if a PMC other than PMC5-6 is enabled
These flags allow further optimization of PMC5 update code, by
allowing frequently tested conditions to be performed at
translation time.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221025202424.195984-3-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the methods to excp_helper.c and make them static.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221021142156.4134411-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that cs->interrupt_request indicates if there is any unmasked
interrupt, checking if the CPU has work to do can be simplified to a
single check that works for all CPU models.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221021142156.4134411-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This new method will check if any pending interrupt was unmasked and
then call cpu_interrupt/cpu_reset_interrupt accordingly. Code that
raises/lowers or masks/unmasks interrupts should call this method to
keep CPU_INTERRUPT_HARD coherent with env->pending_interrupts.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221021142156.4134411-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Export p7_interrupt_powersave and use it in p7_next_unmasked_interrupt.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-26-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the interrupt masking logic out of cpu_has_work_POWER7 in a new
method, p7_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-25-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER7 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Hypervisor Doorbell and Event-Based Branch: introduced in
Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Doorbell and Critical Doorbell Interrupt: processor does not implement
the Embedded.Processor Control category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-23-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_deliver_interrupt, processor-specific
code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-22-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER7 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Hypervisor Doorbell and Event-Based Branch: introduced in
Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Doorbell and Critical Doorbell Interrupt: processor does not implement
the Embedded.Processor Control category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-21-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_next_unmasked_interrupt_generic,
processor-specific code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-20-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Export p8_interrupt_powersave and use it in p8_next_unmasked_interrupt.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-19-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the interrupt masking logic out of cpu_has_work_POWER8 in a new
method, p8_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-18-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER8 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell: processor does not implement the
"Embedded.Processor Control" category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-16-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_deliver_interrupt, processor-specific
code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-15-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER8 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970, and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell: processor does not implement the "Embedded.Processor
Control" category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-14-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_next_unmasked_interrupt_generic,
processor-specific code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Export p9_interrupt_powersave and use it in p9_next_unmasked_interrupt.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-12-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the interrupt masking logic out of cpu_has_work_POWER9 in a new
method, p9_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-11-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER9 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell Interrupt: removed in Power ISA v3.0;
- Programmable Interval Timer: 40x-only.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_deliver_interrupt, processor-specific
code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the following unused interrupts from the POWER9 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell Interrupt: removed in Power ISA v3.0;
- Programmable Interval Timer: 40x-only.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new method is identical to ppc_next_unmasked_interrupt_generic,
processor-specific code will be added/removed in the following patches.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221011204829.1641124-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use ppc_set_irq to raise/clear interrupts to ensure CPU_INTERRUPT_HARD
will be set/reset accordingly.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221011204829.1641124-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This enum defines the bit positions in env->pending_interrupts for each
interrupt. However, except for the comparison in kvmppc_set_interrupt,
the values are always used as (1 << PPC_INTERRUPT_*). Define them
directly like that to save some clutter. No functional change intended.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221011204829.1641124-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Used gvec to translate XVTSTDCSP and XVTSTDCDP.
xvtstdcsp:
rept loop imm master version prev version current version
25 4000 0 0,206200 0,040730 (-80.2%) 0,040740 (-80.2%)
25 4000 1 0,205120 0,053650 (-73.8%) 0,053510 (-73.9%)
25 4000 3 0,206160 0,058630 (-71.6%) 0,058570 (-71.6%)
25 4000 51 0,217110 0,191490 (-11.8%) 0,192320 (-11.4%)
25 4000 127 0,206160 0,191490 (-7.1%) 0,192640 (-6.6%)
8000 12 0 1,234719 0,418833 (-66.1%) 0,386365 (-68.7%)
8000 12 1 1,232417 1,435979 (+16.5%) 1,462792 (+18.7%)
8000 12 3 1,232760 1,766073 (+43.3%) 1,743990 (+41.5%)
8000 12 51 1,239281 1,319562 (+6.5%) 1,423479 (+14.9%)
8000 12 127 1,231708 1,315760 (+6.8%) 1,426667 (+15.8%)
xvtstdcdp:
rept loop imm master version prev version current version
25 4000 0 0,159930 0,040830 (-74.5%) 0,040610 (-74.6%)
25 4000 1 0,160640 0,053670 (-66.6%) 0,053480 (-66.7%)
25 4000 3 0,160020 0,063030 (-60.6%) 0,062960 (-60.7%)
25 4000 51 0,160410 0,128620 (-19.8%) 0,127470 (-20.5%)
25 4000 127 0,160330 0,127670 (-20.4%) 0,128690 (-19.7%)
8000 12 0 1,190365 0,422146 (-64.5%) 0,388417 (-67.4%)
8000 12 1 1,191292 1,445312 (+21.3%) 1,428698 (+19.9%)
8000 12 3 1,188687 1,980656 (+66.6%) 1,975354 (+66.2%)
8000 12 51 1,191250 1,264500 (+6.1%) 1,355083 (+13.8%)
8000 12 127 1,197313 1,266729 (+5.8%) 1,349156 (+12.7%)
Overall, these instructions are the hardest ones to measure performance
as the gvec implementation is affected by the immediate. Above there are
5 different scenarios when it comes to immediate and 2 when it comes to
rept/loop combination. The immediates scenarios are: all bits are 0
therefore the target register should just be changed to 0, with 1 bit
set, with 2 bits set in a combination the new implementation can deal
with using gvec, 4 bits set and the new implementation can't deal with
it using gvec and all bits set. The rept/loop scenarios are high loop
and low rept (so it should spend more time executing it than translating
it) and high rept low loop (so it should spend more time translating it
than executing this code).
These comparisons are between the upstream version, a previous similar
implementation and a one with a cleaner code(this one).
For a comparison with o previous different implementation:
<20221010191356.83659-13-lucas.araujo@eldorado.org.br>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-13-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XSTSTDCSP, XSTSTDCDP and XSTSTDCQP to decodetree and moved some of
its decoding away from the helper as previously the DCMX, XB and BF were
calculated in the helper with the help of cpu_env, now that part was
moved to the decodetree with the rest.
xvtstdcsp:
rept loop master patch
8 12500 1,85393600 1,94683600 (+5.0%)
25 4000 1,78779800 1,92479000 (+7.7%)
100 1000 2,12775000 2,28895500 (+7.6%)
500 200 2,99655300 3,23102900 (+7.8%)
2500 40 6,89082200 7,44827500 (+8.1%)
8000 12 17,50585500 18,95152100 (+8.3%)
xvtstdcdp:
rept loop master patch
8 12500 1,39043100 1,33539800 (-4.0%)
25 4000 1,35731800 1,37347800 (+1.2%)
100 1000 1,51514800 1,56053000 (+3.0%)
500 200 2,21014400 2,47906000 (+12.2%)
2500 40 5,39488200 6,68766700 (+24.0%)
8000 12 13,98623900 18,17661900 (+30.0%)
xvtstdcdp:
rept loop master patch
8 12500 1,35123800 1,34455800 (-0.5%)
25 4000 1,36441200 1,36759600 (+0.2%)
100 1000 1,49763500 1,54138400 (+2.9%)
500 200 2,19020200 2,46196400 (+12.4%)
2500 40 5,39265700 6,68147900 (+23.9%)
8000 12 14,04163600 18,19669600 (+29.6%)
As some values are now decoded outside the helper and passed to it as an
argument the number of arguments of the helper increased, the number
of TCGop needed to load the arguments increased. I suspect that's why
the slow-down in the tests with a high REPT but low LOOP.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-12-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
