With the addition of "numa_node" properties for PHBs we began
advertising NUMA affinity in cases where nb_numa_nodes > 1.
Since the default on the guest side is to make no assumptions about
PHB NUMA affinity (defaulting to -1), there is still a valid use-case
for explicitly defining a PHB's NUMA affinity even when there's just
one node. In particular, some workloads make faulty assumptions about
/sys/bus/pci/<devid>/numa_node being >= 0, warranting the use of
this property as a workaround even if there's just 1 PHB or NUMA
node.
Enable this use-case by always advertising the PHB's NUMA affinity
if "numa_node" has been explicitly set.
We could achieve this by relaxing the check to simply be
nb_numa_nodes > 0, but even safer would be to check
numa_info[nodeid].present explicitly, and to fail at start time
for cases where it does not exist.
This has an additional affect of no longer advertising PHB NUMA
affinity unconditionally if nb_numa_nodes > 1 and "numa_node"
property is unset/-1, but since the default value on the guest
side for each PHB is also -1, the behavior should be the same for
that situation. We could still retain the old behavior if desired,
but the decision seems arbitrary, so we take the simpler route.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Shivaprasad G. Bhat <shivapbh@in.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
- A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
- A 64-bit window which maps onto a large region somewhere high in PCI
address space (traditionally this used an identity mapping from guest
physical address to PCI address, but that's not always the case)
The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however. At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.
This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window. With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.
This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured. The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).
So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified. This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.
For now, this only adds the possibility of 64-bit windows. The default
configuration still uses the legacy mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.
There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows. This gives the most control, but is very awkward with 6
mandatory parameters. Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.
The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO). Obviously, for migration we can only change the
locations on a new machine type, however.
This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.
So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
can do.
For now, this just changes where the calculation is done. It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
restore xirr_owner after migration and move restoring to
icp_post_load]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)
The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.
This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.
The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.
This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.
These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.
This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR TCE tables manage 2 copies when VFIO is using an IOMMU -
a guest view of the table and a hardware TCE table. If there is no VFIO
presense in the address space, then just the guest view is used, if
this is the case, it is allocated in the KVM. However since there is no
support yet for VFIO in KVM TCE hypercalls, when we start using VFIO,
we need to move the guest view from KVM to the userspace; and we need
to do this for every IOMMU on a bus with VFIO devices.
This implements the callbacks for the sPAPR IOMMU - notify_started()
reallocated the guest view to the user space, notify_stopped() does
the opposite.
This removes explicit spapr_tce_set_need_vfio() call from PCI hotplug
path as the new callbacks do this better - they notify IOMMU at
the exact moment when the configuration is changed, and this also
includes the case of PCI hot unplug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ICP" is a different object than the "XICS". For historical reasons,
we have a number of places where we name a variable "icp" while it contains
a XICSState pointer. There *is* an ICPState structure too so this makes
the code really confusing.
This is a mechanical replacement of all those instances to use the name
"xics" instead. There should be no functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[spapr_cpu_init has been moved to spapr_cpu_core.c, change there]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The common class doesn't change, the KVM one is sPAPR specific. Rename
variables and functions to xics_spapr.
Retain the type name as "xics" to preserve migration for existing sPAPR
guests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's become redundant since it was added in commit 09aa9a5 "spapr-pci:
enable adding PHB via -device".
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be later used by the "ibm,reset-pe-dma-window" RTAS handler
which resets the DMA configuration to the defaults.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LoPAPR dictates that during system reset all DMA windows must be removed
and the default DMA32 window must be created so does the patch.
At the moment there is just one window supported so no change in
behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to have multiple DMA windows at different offsets on
a PCI bus. For the sake of migration, we will have as many TCE table
objects pre-created as many windows supported.
So we need a way to map windows dynamically onto a PCI bus
when migration of a table is completed but at this stage a TCE table
object does not have access to a PHB to ask it to map a DMA window
backed by just migrated TCE table.
This adds a "root" memory region (UINT64_MAX long) to the TCE object.
This new region is mapped on a PCI bus with enabled overlapping as
there will be one root MR per TCE table, each of them mapped at 0.
The actual IOMMU memory region is a subregion of the root region and
a TCE table enables/disables this subregion and maps it at
the specific offset inside the root MR which is 1:1 mapping of
a PCI address space.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently TCE tables are created once at start and their sizes never
change. We are going to change that by introducing a Dynamic DMA windows
support where DMA configuration may change during the guest execution.
This changes spapr_tce_new_table() to create an empty zero-size IOMMU
memory region (IOMMU MR). Only LIOBN is assigned by the time of creation.
It still will be called once at the owner object (VIO or PHB) creation.
This introduces an "enabled" state for TCE table objects, some
helper functions are added:
- spapr_tce_table_enable() receives TCE table parameters, stores in
sPAPRTCETable and allocates a guest view of the TCE table
(in the user space or KVM) and sets the correct size on the IOMMU MR;
- spapr_tce_table_disable() disposes the table and resets the IOMMU MR
size; it is made public as the following DDW code will be using it.
This changes the PHB reset handler to do the default DMA initialization
instead of spapr_phb_realize(). This does not make differenct now but
later with more than just one DMA window, we will have to remove them all
and create the default one on a system reset.
No visible change in behaviour is expected except the actual table
will be reallocated every reset. We might optimize this later.
The other way to implement this would be dynamically create/remove
the TCE table QOM objects but this would make migration impossible
as the migration code expects all QOM objects to exist at the receiver
so we have to have TCE table objects created when migration begins.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The user could have picked LIOBN via the CLI but the device tree
rendering code would still use the value derived from the PHB index
(which is the default fallback if LIOBN is not set in the CLI).
This replaces SPAPR_PCI_LIOBN() with the actual DMA LIOBN value.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are possible racing situations involving hotplug events and
guest migration. For cases where a hotplug event is migrated, or
the guest is in the process of fetching device tree at the time of
migration, we need to ensure the device tree is created and
associated with the corresponding DRC for devices that were
hotplugged on the source, but 'coldplugged' on the target.
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory barriers are needed also by Xen and, when the ioeventfd
bugs are fixed, by TCG as well.
sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to
the actual users.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU currently crashes when using bad parameters for the
spapr-pci-host-bridge device:
$ qemu-system-ppc64 -device spapr-pci-host-bridge,buid=0x123,liobn=0x321,mem_win_addr=0x1,io_win_addr=0x10
Segmentation fault
The problem is that spapr_tce_find_by_liobn() might return NULL, but
the code in spapr_populate_pci_dt() does not check for this condition
and then tries to dereference this NULL pointer.
Apart from that, the return value of spapr_populate_pci_dt() also
has to be checked for all PCI buses, not only for the last one, to
make sure we catch all errors.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is
only one implementation of the finish_realize hook in sPAPRPHBClass. So,
we can fold that implementation into its (single) caller, and remove the
hook. That's the last thing left in sPAPRPHBClass, so that can go away as
well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Now that the EEH code is independent of the special
spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI
host bridges instead. We do this by changing spapr_phb_eeh_available()
to be based on the vfio_eeh_as_ok() call instead of the host bridge class.
Because the value of vfio_eeh_as_ok() can change with devices being
hotplugged or unplugged, this can potentially lead to some strange edge
cases where the guest starts using EEH, then it starts failing because
of a change in status.
However, it's not really any worse than the current situation. Cases that
would have worked previously will still work (i.e. VFIO devices from at
most one VFIO IOMMU group per vPHB), it's just that it's no longer
necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState. So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper. For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.
On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Since 3f1e147, QEMU has adopted a convention of supporting function
hotplug by deferring hotplug events until func 0 is hotplugged.
This is likely how management tools like libvirt would expose
such support going forward.
Since sPAPR guests rely on per-func events rather than
slot-based, our protocol has been to hotplug func 0 *first* to
avoid cases where devices appear within guests without func 0
present to avoid undefined behavior.
To remain compatible with new convention, defer hotplug in a
similar manner, but then generate events in 0-first order as we
did in the past. Once func 0 present, fail any attempts to plug
additional functions (as we do with PCIe).
For unplug, defer unplug operations in a similar manner, but
generate unplug events such that function 0 is removed last in guest.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This RTAS call is used to request new interrupts or to free all interrupts.
If the driver has already allocated interrupts and asks again for a non-null
number of irqs, then the rtas_ibm_change_msi() function will silently leak
the previous interrupts.
It happens because xics_free() is only called when the driver releases all
interrupts (!req_num case). Note that the previously allocated spapr_pci_msi
is not leaked because the GHashTable is created with destroy functions and
g_hash_table_insert() hence frees the old value.
This patch makes sure any previously allocated MSIs are released when a
new allocation succeeds.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The num local variable is initialized to zero and has no writer.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.
This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.
For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.
Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated
PCI devices") as rtas_ibm_set_eeh_option() isn't the right place
to check if there has the corresponding PCI device for the input
address, which can be PE address, not PCI device address.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR requires ibm,req#msi and ibm,req#msi-x to be present in the
device node to define the number of msi/msi-x interrupts the device
supports, respectively.
Currently we have ibm,req#msi-x hardcoded to a non-sensical constant
that happens to be 2, and are missing ibm,req#msi entirely. The result
of that is that msi-x capable devices get limited to 2 msi-x
interrupts (which can impact performance), and msi-only devices likely
wouldn't work at all. Additionally, if devices expect a minimum that
exceeds 2, the guest driver may fail to load entirely.
SLOF still owns the generation of these properties at boot-time
(although other device properties have since been offloaded to QEMU),
but for hotplugged devices we rely on the values generated by QEMU
and thus hit the limitations above.
Fix this by generating these properties in QEMU as expected by guests.
In the future it may make sense to modify SLOF to pass through these
values directly as we do with other props since we're duplicating SLOF
code.
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, rtas_ibm_change_msi() always returns four values even if
less are specified.
Correct this by only returning the fourth parameter if it was
requested.
This is specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There might have emulated PCI devices, together with VFIO PCI
devices under one PHB. The EEH capability shouldn't enabled
on emulated PCI devices.
The patch returns error when enabling EEH capability on emulated
PCI devices by RTAS call "ibm,set-eeh-option".
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
* phb_index is not being used and if required can be obtained from sphb
* use helper to get drc_index in spapr_populate_pci_child_dt()
* Check if drc_index is zero
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Each hardware instance has a platform unique location code. The OF
device tree that describes a part of a hardware entity must include
the “ibm,loc-code” property with a value that represents the location
code for that hardware entity.
Populate ibm,loc-code.
1) PCI passthru devices need to identify with its own ibm,loc-code
available on the host. In failure cases use:
vfio_<name>:<phb-index>:<bus>:<slot>.<fn>
2) Emulated devices encode as following:
qemu_<name>:<phb-index>:<bus>:<slot>.<fn>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
All the PCI enumeration and device node creation was off-loaded to
SLOF. With PCI hotplug support, code needed to be added to add device
node. This creates multiple copy of the code one in SLOF and other in
hotplug code. To unify this, the patch adds the pci device node
creation in Qemu. For backward compatibility, a flag
"qemu,phb-enumerated" is added to the phb, suggesting to SLOF to not
do device node creation.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ Squashed Michael's drc_index changes ]
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_hash_table_iter_init() & friends anymore.
This reverts commit f8833a37c0.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Device node names should encode the unit address as hex, while the
code was encodind it as integers.
Also, use FDT_NAME_MAX macro for allocating and composing the name.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current code missed the Prog IF register. All Class Code, Subclass,
and Prog IF registers are needed to identify the accurate device type.
For example: USB controllers use the PROG IF for denoting: USB
FullSpeed, HighSpeed or SuperSpeed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The properties reg/assigned-resources need to encode 64-bit memory
address space as part of phys.hi dword.
00 if configuration space
01 if IO region,
10 if 32-bit MEM region
11 if 64-bit MEM region
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.
Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.
This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
This uses extension of existing EPOW interrupt/event mechanism
to notify userspace tools like librtas/drmgr to handle
in-guest configuration/cleanup operations in response to
device_add/device_del.
Userspace tools that don't implement this extension will need
to be run manually in response/advance of device_add/device_del,
respectively.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enables hotplug of PCI devices to a PHB. Upon hotplug we
generate the OF-nodes required by PAPR specification and
IEEE 1275-1994 "PCI Bus Binding to Open Firmware" for the
device.
We associate the corresponding FDT for these nodes with the DRC
corresponding to the slot, which will be fetched via
ibm,configure-connector RTAS calls by the guest as described by PAPR
specification.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
