Since 1cc33683, this field is not set for most devices, so just
remove it and its remaining few uses.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is probably a little drastic, but the includes in this file are
now totally out of control when compared with what includes are
actually needed.
This may break the build on e.g. *BSD, but it will be easily fixed by
re-instating an include.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A Python script which uses qmp.py to print some simple VM info.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a very simple shell written in Python for demonstration
purposes.
Unfortunately it's a bit awkward right now, as the user has
to specify the arguments names and the printed data can be
a raw dictionary or list, like the following example:
(QEMU) pci_add pci_addr=auto type=nic
{u'slot': 5, u'bus': 0, u'domain': 0, u'function': 0}
(QEMU)
It's worth to note that the shell is broken into two files.
One is the shell itself, the other is the QMP class which
handles the communication with QEMU.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We still have handlers which will call monitor print functions
in several places. Usually to report errors.
If they do this when we are in control mode, we will be emitting
garbage to our clients.
To avoid this problem, this commit adds a way to disable those
functions. If any of them is called when in control mode, we will
emit a generic error.
Although this is far from the perfect solution, it guarantees
that only JSON is sent to Clients.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Debug, shutdown, reset, powerdown and stop are all basic events,
as they are very simple they can be added in the same commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Asynchronous events are generated with a call to
monitor_protocol_event().
This function builds the right data-type and emit the event
right away. The emitted data is always a JSON object and its
format is as follows:
{ "event": json-string,
"timestamp": { "seconds": json-number, "microseconds": json-number },
"data": json-value }
This design is based on ideas by Amit Shah <amit.shah@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The 'info' command makes sense for the user protocol, but for QMP
it doesn't, as its return data is not well defined. That is, it
can return anything.
To fix this Avi proposes having 'query-' commands when in protocol
mode. For example, 'info balloon' would become 'query-balloon'.
The right way of supporting this would probably be to move all
info handlers to qemu-monitor.hx, add a flags field to mon_cmd_t
to identify them and then modify do_info() to do its search based
on that flag.
Unfortunately, this would require a big change in the Monitor.
To make things simpler for now, this commit takes a different
approach: a check for commands starting with "query-" is added to
toplevel QMP code, if it's true we setup things so that do_info()
is called with the appropriate arguments.
This is a hack, but is a temporary one and guarantees that query-
commands will work from the first day.
Also note that 'info' is not allowed in protocol mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The JSON stream parser is used to do QMP input. When there
are enough characters to be parsed it calls Monitor's
handle_qmp_command() function to handle the input.
This function's job is to check if the input is correct and
call the appropriate handler. In other words, it does for QMP
what handle_user_command() does for the user protocol.
This means that handle_qmp_command() also has to parse the
(ugly) "args_type" format to able to get the arguments names
and types expected by the handler.
The format to input commands in QMP is as follows:
{ "execute": json-string,
"id": json-value, "arguments": json-object }
Please, note that this commit also adds "id" support.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds specific QMP checks to do_info(), so that
it behaves as expected in QMP mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the new Monitor output is always performed by only two
functions: do_info() and monitor_call_handler().
To support QMP output, we modify those functions to check if we
are in control mode. If so, we call monitor_protocol_emitter()
to emit QMP output, otherwise we do regular output.
QMP has two types of responses to issued commands: success and
error. The outputed data is always a JSON object.
Success responses have the following format:
{ "return": json-value, "id": json-value }
Error responses have the following format:
{ "error": { "class": json-string,
"desc": json-string,
"data": json-value } "id": json-value }
Please, note that the "id" key is part of the input code, and
thus is not added in this commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds initial QMP support in QEMU. It's important
to notice that most QMP code will be part of the Monitor.
Input will be read by monitor_control_read(). Currently it
does nothing but next patches will add proper input support.
The function monitor_json_emitter(), as its name implies, is
used by the Monitor to emit JSON output. In this commit it's
used by monitor_control_event() to print our greeting message.
Finally, control mode support is also added to monitor_init(),
allowing QMP to be really enabled.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only QERR_QMP_BAD_INPUT_OBJECT is QMP specific, the others can
be used in different contexts by other subsystems.
Please, note that QERR_JSON_PARSING signals any parsing error
from the json parser. We will need it until the parser gets
updated to use QError.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
List QMP available commands. Only valid in control mode, where
has to be used as 'query-commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As this series will add a new kind of Monitor command, it's better
to rename monitor_handle_command() to what it really is:
handle_user_command().
This will avoid confusion.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the loop which searches for the command
entry corresponding to a command name to its own function.
It will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the code which calls Monitor handlers to
its own function, as it will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds a flag called 'control' to the '-monitor'
command-line option. This flag enables control mode.
The syntax is:
qemu [...] -monitor control,<device>
Where <device> is a chardev (excluding 'vc', for obvious reasons).
For example:
$ qemu [...] -monitor control,tcp:localhost:4444,server
Will run QEMU in control mode, waiting for a client TCP connection
on localhost port 4444.
NOTE: I've tried using QemuOpts for this, but turns out that it
will try to parse the device part, which should be untouched.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This flag will be set when Monitor enters "control mode", in
which the output will be defined by the QEMU Monitor Protocol.
This also introduces a macro to check if the flag is set.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New class for KVM unavailable features errors.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Please, note that we will lose the "Try -device '?' for a list"
hint as it's qdev specific.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds QError support in the Monitor.
A QError member is added to the Monitor struct. This new member
stores error information and is also used to check if an error
has occurred when the called handler returns.
Additionally, a new macro called qemu_error_new() is introduced.
It builds on top of the QemuErrorSink API and should be used in
place of qemu_error().
When all conversion to qemu_error_new() is done, qemu_error() can
be turned private.
Basically, Monitor's error flow is something like this:
1. An error occurs in the handler, it calls qemu_error_new()
2. qemu_error_new() builds a new QError object and stores it in
the Monitor struct
3. The handler returns
4. Top level Monitor code checks the Monitor struct and calls
qerror_print() to print the error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QError is a high-level data type which represents an exception
in QEMU, it stores the following error information:
- class Error class name (eg. "ServiceUnavailable")
- description A detailed error description, which can contain
references to run-time error data
- filename The file name of where the error occurred
- line number The exact line number of the error
- function The function name of where the error occurred
- run-time data Any run-time error data
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that we can now write qstring_from_str() as a wrapper.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It accepts a va_list and will be used by QError. Also simplifies
the code a little, as the other qobject_from_() functions can
use it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the recent device handling changes the I2C slave addressing code
was broken. With current code, if a slave with the correct address is
not found on the bus the last scanned slave on the bus will be
addressed. This is wrong. Please find attached a patch to fix it.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
